Problem with "Creating a user interface" ex1_02

I was going through the exercise for creating a user interface for the Employee Portal and the window is not resizing at all when the window is adjusted. I thought I made a simple mistake somewhere but my code is exactly the same as the solution file which doesn't resize as well. I followed the instructions exactly as described (triple-checked) and tried running the web application in both Mozilla Firefox 6.0 and IE 8.
The files and instructions mentioned can be found here: http://www.adobe.com/devnet/flex/videotraining/exercises/ex1_02.html
Thanks in advance.

Sorry for the delayed response.
Are you referring to the part of the video where the browser window is resized so that the application content is not contained within the Rect component? If so, this was only shown in the video to demonstrate how the bottom of the Rect component resizes based on the browser, while the contentGroup does not resize based on browser's height.
In the finished application, you should not see the application's height collapse. However, if you expand your browser, you should see that the Rect component is still constrained to 20 pixels from the bottom of the window.

Similar Messages

  • Problem with creating new user in portal = portlet is not visible

    Hi,
    I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
    How can I make this portlet visible?
    Please Help
    thank you...
    Gilbert

    Hi..my problem slightly similar.
    I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
    I expect the user will be a public user.
    But, when he try to logged in the portal,
    He cannot see all the PORTLETS related to database values..
    All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
    So, what did i do wrong?
    Plz Advise, and thanks.

  • Problems with AE CS5 user interface

    I  am having a lot of problems with  my UI freezing in AE CS5.  The  projects are generally very small, and  it seems to happen randomly.   Sometimes I will merely click on a  particular window and that  particular window will "white out" and I get  the little Windows  spinning circle.  Then when I click on another  window, it also whites  out.  Sometimes this has happened when I tried to  render something.   Sometimes it happens when I try to save a project.   There seems to be  no pattern.  I work with a variety of media, including  SD, HD and image  sequences (.png).
    When the UI freezes, it never  unfreezes.  I have to shut  down the program and open it again.
    Thanks for  any help.
    WINDOWS 7   PROFESSIONAL 64-BIT
    16 GB RAM (11 GB MADE AVAILABLE FOR AE)
    DELL   PRECISION T7400 WORKSTATION
    DUAL QUAD CORE
    NVIDIA GEFORCE   GTX 285 (NEWEST DRIVERS)
    LOTS OF HARD DRIVE SPACE
    OPENGL   TURNED OFF IN PREFERENCES
    ENABLE DISK CACHE TURNED OFF
    --Render Multiple Frames Simultanously is not enabled.
    --FOOTAGE I USE:   QT, AVI, .PNG SEQUENCES, MOSTLY 720X480, BUT SOME  HD.
    --FOOTAGE STORAGE:  ON VARIOUS SATA HARD DRIVES, BUT NOT ON THE SAME  DRIVE AS THE AE.EXE IS.
    --SYSTEM DIRVE IS A SATA  HDD DRIVE
    --background tasks running?  A FEW THINGS, MAINLY MY  ANTIVIRUS PROGRAM (BIT DEFENDER), PLUS ADOBE CS5 SERVICE MANAGER,  SOMETHING CALLED CTXFIHLP, AND SOMETHING CALLED SBSV 2010/02/19-11:02:07  (ADOBE).  THESE ARE THE ONLY THINGS RUNNING AT STARTUP.  BUT I OFTEN  HAVE PHOTOSHOP OR PREMIERE OR FIREWORKS OPEN AS WELL.  AND SOMETIMES A  BROWSER (FIREFOX) IS OPEN AS WELL.

    Sysinternals --> Process Monitor, possibly: SourceForge --> Wireshark. If the freezes are that frequent, but (seemingly) at arbitrary intervals, it may quite well be a deeper problem. most likely you are running into some generic socket and network configuration problem. I suggest you set both apps to filter their views and logs by application and just keep an eye out for anything that blimps up in red or ornage/ yellow, stating a possible problem. It may take a while to sift through all the data, as they both produce several thousand entries in only a few seconds, but this may reveal something. Also check your BIOS for SATA and PCIe configuration. bad timing on your buses could be a major pain. I'd even go so far as to open the machine and see if all poweer connectors are sitting properly and the cards are also firmly resting in their slots. While there, also run the machine with open casing for a while to exclude cooling problems 8which lead to processor throttling).
    Mylenium

  • When I use FF 4 I have problem with my Intranet user interface, I lost the ability to acces my intranet database? So for now I go back to previous version. I hope that kind of problem can be fix soon.

    I usually use FF 3.6 version to download data from my company intranet. With old FF version I can access the intranet easily. But when I upgrade to the FF 4, I lost the ability to customize the variable data I want to collect. It kind of stuck. Usually when I right click I have option what to do. with the new version my option is none. nothing change. It's frustrating. So now, I go back to previous version. You said previous version is vulnerable to phishing or virus or something but still it user friendly for me to access my company data. Please fix that bug and I'll upgrade to the newest version.

    I want to add my progress about this problem. I find this problem in IE 9, but it has compatibility view, though not too perfect but quite helpful. Whereas FF 4, from article in support, said it doesn't have one. So, I beg you FF team to accommodate us who still deal with old web design so we still can use this FF 4. Please..please..please. I still believe Firefox is the best browser and I hope FF team also responsive about current problem. I think I don't have any option, but to downgrade FF to 3.6 until someone tell me how to deal with this kind of problem. Thanks.

  • Problems with Flash CC user interface. Mainly I can't seem to click certain buttons and input fields on various modal windows. (eg. Scale and Rotate, Sound Properties,

    Hi there,
    I'm wondering if anyone else is experiencing issues like this. I'm basically finding that a bunch of different buttons, fields, and tabs do not respond to my clicks. This seems to be spread out throughout the application.
    I've had to work around most of this by using the tab and arrow keys to navigate around modal buttons and fields... but it is a bit of a pain.
    There are some parts of the interface that can't be accessed via tabs and arrow keys... for example the ActionScript Tab on the Sound Properties window... there's no way to get to that... and clicking the tab itself does nothing, although I can see that the rollover state of the tab is activated.
    I've ended up having to run Flash CS6 in order to set the export classes of sound files and that's a bigger pain.
    Similar UI issues exist with other things... for example the color picker (eye dropper) seems to pick colors near, but not directly under itself.
    I'll be honest... I'm running on Windows 7... via boot camp... on a Mac Book Pro with retina display... so the issues could stem from this combination. However... Flash CS6 does not have any of these issues... so I can only think that it is a Flash CC issue.
    I appreciate any input you can provide. ( Although the obvious "run it on OSX instead" or "just use CS6" aren't the kinds of answers I'm looking for. I have my reasons for the setup. )
    Thanks.
    Cheerfully,
                           - JR

    Thank you for the suggestion. I've just done the uninstall, clean, re-install process.
    No luck.
    Even the first-run modal that comes up to choose Sync Settings has the same problem. All three buttons will go to a rollover state if I mouse over them... however, none of them are clickable. The only clickable item is the OS window close button. If I use the TAB key to move from button to button it moves the yellow button selector accordingly. If I press the ENTER key it responds correctly. For some reason clicking is not working on these parts of the Flash CC UI.
    *Note: This does not happen with all of the Flash CC UI elements... only some key ones (Save As - Confirm Overwrite, Symbol Properties and Swap Symbol dialog boxes also do not work with clicks, only with the keyboard navigation). Really a pain in the posterior.
    Again, I'm wondering if this is an issue particular to my hardware/os combination but I have had no luck finding answers online.
    Any other possible solutions out there?

  • Problems with Creating New Users after migration to EOP

    My company uses EOP only for spam email protection as we have an on premise Exchange 2010 server.  The issue I am having is after I manually create a new user through the Office 365 Admin Center they do not show up as a user in the Exchange Admin Center
    part of EOP. Please let me know if any additional information is needed.

    Hi,
    Thank you for your post here.
    Please firstly double check your configuration as the follow article.
    http://technet.microsoft.com/en-us/library/office-365-user-account-management.aspx
    Best Regards
    Quan Gu

  • I have problems with my itunes user interface

    i can't see all the options & checkbox int the prefernences window
    what should i do to solve it  ?

    Hello gustavolopez,
    Thanks for using Apple Support Communities.
    To reinstall iTunes, please download and install from the following website:
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Take care,
    Alex H.

  • Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

    Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
    1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
    2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
    Appreciate for any help rendered.

    Mikko777 wrote:So what is the best?
    I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
    What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
    Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
    Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
    Mikko777 wrote:PS:You produce a lot of text and welcome smile
    Yeah. Wonder why I'm still employed? So do I ...

  • How to create Labview User Interface with buttons?

    Hello,
    I try to create a user interface, where the TestStand sequencies can be selected one by one not only Test UUT, Single run and run Mainsequence (about 20 buttons needed).
    I'm playing with the simple UI shipped with TS and can load the sequence file and run automatically a sequence (Main or another).
    How can I create and assign buttons to all sequence files in my TS project?
    Any help would be appreciated.
    Thanks. (TS 4.0, LV 8.0)

    I've modified my main VI with the below steps.
    I still don't know how to create and assign front panel buttons to the user interface.
    Anybody could explain to me how do I need to modify the attached part of my main vi and how to assign buttons.
    Thanks.
    Attachments:
    InteractiveArgs_2.png ‏12 KB

  • A more successful experiment in creating compositable user interfaces for Config Dialogs

    A couple weeks ago I posted an experiment in creating compositable user interfaces using transparent subpanels. The approach might best be described as, "It at least was notable for being novel."
    Today, I'm posting another attempt, this one along more traditional lines, and far more successful. Particularly notable: this one can do all the arbitrary composition of the last one AND it solves the TAB order problem.
    This solution uses a picture control and renders N copies of a control. When the user tabs to a control or moves the mouse over the control, a real control slides into that position to be able to catch the events (update mouse over draw state, highlight for keyboard focus, handle typing, etc). When the Value Change occurs, a master array of data is updated and the picture control is updated.
    This is something that has been attempted in various forms in the past, but there are two aspects of this particular implementation that make it nice:
    its programmatic interface for specifying the behavior of the various objects should make it fairly easy for a user of the framework to programmatically generate their dialogs
    it handles the TAB problem without flickering, something I haven't seen in other attemps
    This idea spawns out of conversation about the previous experiment -- thanks to those of you who posted on various forums, e-mailed me, or, in a couple cases, showed up at my desk. That last one is not something I'm encouraging unless you work at NI... just saying. :-)
    Now, this experiement has already yeilded some interesting conversation. We note that as long as controls are instantiated independent of each other -- that is, no property of one control depends upon the property of another control -- this dialog system scales nicely. But in this experiment, I implemented Radio Buttons, which interact with each other -- when one is set True, the others go False. As soon as controls start interacting with each other (such as graying out one control when a checkbox is toggled, or having expandable sections, or really complex cases like updating a graph as some options change, like happens in some Express VI config dialogs) then we start needing ways to refer to the other controls. This rapidly moves us in one of two directions: naming controls or creating references. The naming approach is definitely my preference as it fits better with dataflow and I can do some interesting effects with breaking apart some of the tree. But all of this quickly starts sounding like "Please implement a XAML parser in LabVIEW." For those of you unfamiliar with XAML, in the world of UI design, it might very well be the coolest thing since sliced bread. A XAML string would indeed fit with dataflow, and we could start building that up. I hesitate to head down this road for two reasons. One, as many have noted, there's really not a good XML parsing library written in LabVIEW that can give me a useful DOM tree. Two, that's a huge project and my gut sense is that you'd have to complete a fairly large chunk of it before you'd start seeing any return on investment. But it is worth thinking about -- I might be wrong. Wouldn't be the first time. This code that I've posted today can at least get you started on the generation side if one of you decides to become industrious.
    I'm turning my attention away from this project for now... coding in G is lots of fun, and I wish I could spend more days doing it, but this has been a side project and it's time to get back to my assigned projects in text programming. Building a powerful platform for automatic UI generation in LabVIEW would be really useful -- I see lots of requests for this sort of thing, and other languages are pulling ahead of us in this domain.
    [UPDATE 5/17/2012 - There is an improved version.]
    Solved!
    Go to Solution.
    Attachments:
    ConfighThroughCtrlCreation.zip ‏558 KB

    Elijah K wrote:
    Thanks for posting this Aristos.  I would normally be one of those to go bug you at your desk, but in case I'm not the only one with this question... which particular flickering problem are you referring to?  The act of switching tabs?  In all honesty, I've never noticed...
    When you move controls around on the screen, normally you try to Defer Panel Updates while you do that. But Defer Panel Updates has an effect on control's abilities to catch certain mouse clicks, so when you're trying to move a control to catch the mouse, you have to work a lot without Defer Panel Updates, so if you're adjusting captions, etc, to match the new location, you can see flicker as properties adjust. You can move the control off-screen, as long as you have already updated the picture control to reflect the changes. It took a while to catch all the ways that the flickering can crop up. I think I got 'em all.
    Attached are the VIs saved for LV 2009. Actually, they're saved for LV 8.6, but it doesn't work in 8.6 because of a bug in the picture control that existed back then.
    Attachments:
    ComposableUI_LV2009.zip ‏391 KB

  • Using Captivate with a localized user interface

    Summary:
    I'm working on an Adobe Captivate 2 project describing an
    application that has been created in several languages.
    I'm trying to follow the Captivate 2 help topic "Using Adobe
    Captivate with a localized user interface", to create localized
    movies for each language, but it does not work as described in the
    help topic.
    Can anyone help me with this problem, see below "What went
    wrong?"
    Steps to reproduce:
    According to the help topic:
    1. Record a source langauge file from the application (in my
    case swedish).
    2. Export the text captions to a Word document "Export
    project captions and closed captions", and translate the text (into
    english).
    3. Record a new language file from the application, without
    any automatically included objects.
    4. Import all objects "Import slides/objects from other Adobe
    Captivate projects>Objects only" from the source language file
    created in step 1.
    5. Import the the caption text "Import project captions and
    closed captions" from the translated file in step 2.
    What went wrong?:
    Step 5 does not work, I cannot "Import project captions and
    closed captions" into the new language file, the menu text is grey.
    Product version:
    Product: Adobe Captivate 2
    Version: 2.0.0 Build 1177
    Platform information:
    Hardware: Qbic pc x86
    OS Version: XP Professional
    RAM: 1014 MB
    Color Depth: ?
    Display Card: Intel(R) 82865G Graphics Controller
    Resolution: 1280 x 1024

    Hi TekEl and welcome to our community
    For what it's worth, here is how I might try it.
    1. Record a project using either language.
    2. Perform a "Save As" to a different name.
    3. From the new project, export the Captions.
    4. Localize as necessary.
    5. Import the revised captions into the new project.
    I think the trick here is to ensure that you only attempt to
    import into the project that created the export.
    Cheers... Rick

  • "With Xib for user interface" option Disabled

    I was able to use the "With Xib for user interface" a couple of days ago but now when I try to create new object-c file with xib interface, I cant use the checkbox. It is disabled. What may be the problem? How can I create a file with xib again?

    Does the following Stack Overflow question help you?
    How to create new View Controllers in XCode 4.3
    If not, you're going to have provide more information for anyone to help you. What version of Xcode are you using? What type of Objective-C file are you creating? What type of project are you adding the file to?

  • I have a problem with ALV Grid User Command?

    Hi Experts,
    I have a problem with ALV GRID User Command.
    I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I  created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
    Here is my code.
    FORM user_command_alv  USING u_ucomm TYPE sy-ucomm
                           us_self_field TYPE slis_selfield.
    CASE u_ucomm.
    WHEN '&IC1'.
    READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
            WHEN 'ORDER'.
              IF NOT wa_final-order IS INITIAL.
                SET PARAMETER ID 'COK' FIELD wa_final-order.
                CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
              ENDIF.
    endform.
    PARAMETER ID 'COK'  also the standard one.
    Could you please help me out, Where I did wrong?
    If I select any order, that order only should display.
    Thanks in advance.
    Regards,
    Sarayu.
    Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

    hi,
    Please check it once the Paramater ID is 'ANR' for IW33 order number.
    Hope this may help.
    Regards,
    Sravanthi

  • Create a User Interface...

    Somebody can help me or a tutorial for this?
    How can I create a user interface to view listings and search
    results?
    Thank U all

    Hi Anu,
    I've created a set of VIs for Password changes with priveleges for Admin & User logins.
    I've done for normal notepad text files without file extn.
    So, U can easily modify them as per Ur Excel requirement.
    It's a very basic functionality VI set, that it doesnt have the feature of adding Admin Logins while runnig, U've to modify a littlle bit by Urself.
    Pls make sure that the "list" file exists in the Current Working Directory from which U run the Untitledpass.VI.
    This is the top most VI. Run it & explore the features.
    Rgds,
    Partha.
    - Partha
    LabVIEW - Wires that catch bugs!
    Attachments:
    Password1.zip ‏294 KB

  • I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    Apple ID FAQ   http://support.apple.com/kb/HE37

Maybe you are looking for