Problems with Creating New Users after migration to EOP

My company uses EOP only for spam email protection as we have an on premise Exchange 2010 server. The issue I am having is after I manually create a new user through the Office 365 Admin Center they do not show up as a user in the Exchange Admin Center
part of EOP. Please let me know if any additional information is needed.

Hi,
Thank you for your post here.
Please firstly double check your configuration as the follow article.
http://technet.microsoft.com/en-us/library/office-365-user-account-management.aspx
Best Regards
Quan Gu

Similar Messages

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Problem in creating new user

Hai all,
I am new to Portals, when I am trying to create a new user it was displayed as "<b>User could not be created</b>". What is the actual process of creating a new user and how to work with that user. I have gone through some of the discussions in the form but unable to create the new one.
Can any help on this please.
Suma...

Hi,
Actual process of creating the user is
logon to http://server:port/irj
goto user administration
goto users
click create new user
fill up all mandatory fields, define the data as configured (for e.g. password alphanumeric etc
click create.
You should be able to create the user.
If this process doesnot work check ur UME store settings? if it is in LDAP server check if your LDAP is ab to craete new users etc? you can also try to create new users from Visual Admin .
logoff and then try to login with the newly created user it should show password expire screen.
regards,
Rohin Aggarwal

Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.

I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionInterval

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

Problem with 8.1.6 after migrating to Tru64 5.1A

We just migrate our OS from Tru64 4.0G to Tru64 5.1A.
Our database are 8.1.6.3.1.
After migration the OS we had problem (ORA-07445) with some of our database. It seems that the problem is related to direct IO and a workaround is to set the DISK_ASYNCH_IO parameter to FALSE.
What is the impact of setting this parameter to false ? Should I expect a big decrease in performance ?
Does anybody know if there is a patch for Tru64 5.1 that woudl correct this problem ?
Thanks

After having a closer look at metalink it seems to be obvious, that Forms 6i (8.0.6.) only supports user exits generated with the 8.0.6. precompiler.
If this is the case new questions follow:
Is there a way to get a 8.0.6. precompiler?
Is it possible to connect to a 8.1.5. database with such a user exit? Does anybody have corresponding experiences?
Our customer uses a 8.1.7. database. What about connecting to that database with the user exit?
/Ralph

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

Problem with "Create New Extrusion from Selected Layer" CC 2014

Hello, I'm experienced with Photoshop but am new to 3D text in Photoshop. I type in some text and convert to a shape. When I choose Create New Extrusion from Selected Layer I get dialog box I don't see in any tutorials. It says "You are about to create a 3D layer. Would you like to switch to the 3D workspace? Yes/No, Don't show again." Which should I use for 3D text?
If I choose Yes, all the panels go away and the content in the tool options bar (ribbon?) just under the menu bar go away. I have to restart Photoshop to get the tool options back. What could I be doing wrong?
Thanks - Dave

I just chose "No" and didn't look back. I like my workspace just as it is, and don't prefer Photoshop to change it for me under this particular case.
You can make the 3D panel visible yourself via Window - 3D. I find it's a good alternate for the Actions panel, as I don't have any actions at the moment that work in the 3D world.
The panels you'll want to see easily if you work on 3D are the 3D panel and the Properties panel, among a few others.
Regarding getting your workspace back the way you like it... Note the little selector near the upper-right corner of the Photoshop main window. That can be used to select a workspace. I suggest you experiment and get familiar with the concept of workspaces. You can define your own and save it with a name, and that truly can be helpful.
-Noel

Simple OI with create new user

I follow the "createdeleteuser.seq" and add it to the tool menu via "custom" action
it said that when I build a deploy, this menu item will be in the user interface,
however, I use the "simple OI" and it does not have a menu bar, how do I have createdeleteuser
in the "simple OI"?
Solved!
Go to Solution.

Hi trout00,
Below I created an example to ghost/gray the button based on user privileges. Essentially, I created a User Event to handle the UserChanged event posted by the Application Manager. In the User Event, I then check the user's privilege and update the button accordingly. By using event handling, I will not poll and consume precious CPU cycles.
Steps:
User Changed Event (user event) is created in Step 2
To detect a login/logout, I use the UserChanged event callback posted by Application Manager. Please see Simple OI - Configure Event Callbacks.vi
In the UserChaged callback, I then fire the User Changed Event to update the button appearance. Please see UserChanged Event Callback [UserChangedCallback.vi].
Unfortunately the TestStand API does not have a method to easily get a user's group. However, please read the get group name of currently logged in user forum post for a workaround.
Note that the Simple OI does not have the code to create the menu. However, you can implement the code necessary to display the menu. This is what developers did to show the menu in the Full-Featured UI. Nevertheless, the capabilities do exist.
The GetRunTimeToolMenuItems editArgsParam is optional and hence does not require an input. However, the same parameter for InvokeItem is required and hence requires an input. It's empty because there is no concern of an active/selected UI item.
Hope this example helps trout00
Message Edited by Nestor_G on 12-03-2008 06:44 PM
Nestor
Attachments:
updatedSimpleOI.zip ‏417 KB

Problem with "Creating a user interface" ex1_02

I was going through the exercise for creating a user interface for the Employee Portal and the window is not resizing at all when the window is adjusted. I thought I made a simple mistake somewhere but my code is exactly the same as the solution file which doesn't resize as well. I followed the instructions exactly as described (triple-checked) and tried running the web application in both Mozilla Firefox 6.0 and IE 8.
The files and instructions mentioned can be found here: http://www.adobe.com/devnet/flex/videotraining/exercises/ex1_02.html
Thanks in advance.

Sorry for the delayed response.
Are you referring to the part of the video where the browser window is resized so that the application content is not contained within the Rect component? If so, this was only shown in the video to demonstrate how the bottom of the Rect component resizes based on the browser, while the contentGroup does not resize based on browser's height.
In the finished application, you should not see the application's height collapse. However, if you expand your browser, you should see that the Rect component is still constrained to 20 pixels from the bottom of the window.

Got problems with creating RTF-files after OSX update

Hi
I don't know if this is really a MAC OS problem, but it occurred after I updated to 10.5.2 - so it's a likely suspect.
Since the update I can't create RTF-files any more with Final Draft, my script writing program. A file is created, but when I try to open it I get an error message that it cannot be found. But the file is there: I can see it and click on it. It just won't open.
Only today now I got the same error message with a doc-file I downloaded some months ago.
The only big change I lately made to my Mac was the update to 10.5.2 and I got the new Office 2008 (both are the German versions). Could the problem come from either of them? I contacted Final Draft's support - they didn't know of the problem.
Maybe someone else in this forum has encountered similar problems?

Have you tried to Repair Permissions using Disk Utility?
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the icon for your boot volume.
3. Click on the First Aid tab and select Repair Permissions
4. Click the repair permissions button.
This is the first thing to try whenever any program goes wonky. It's free, but takes awhile for all the files that have to be checked and changed.

Problems with creating new WinHelp 2000 projects (RoboHELP 7)

We changed to RoboHELP 7 one week ago. Before we used
RoboHELP X5. On the Computer where I installed RH7 the demo of RH7
was installed before. It is a Windows Vista sytem. But after
encountering problems I set up a VM Ware (Windows XP SP 2). The
problems remained the same.
Editing our old X5 projects is no problem. But when creating
a new project it is impossible to set a non-scrolling region. I
figured out that the paragraph mark for setting up a non-scrolling
region in RH5 is right before a pagebreak in the word documents
(Topics 2 to X). In RH7 it is place directly in front of Heading 1.
By creating a new document in the project and deleting the default
document you can work on as normal. Editing the DOCX template works
fine either. But from my point of view this cannot be the final
conclusion.
The second problem is that changes in the help window
configuration oviously are stored but not compiled anymore. You can
change color and dimension of your main help window and these
changes are stored correctly. But when compiling the project there
are no changes to the default values in the output. More worse:
when you open the HPJ file directly with Microsoft Help Workshop
application there are written some strange marks (like
“ï»¿”) into the first lines and the help
file cannot be compiled by Help Workshop application anymore. The
error message sounds like this: HC3073: Warning: hhtrace.hpj: No
section is defined for the line "ï»¿.".
Anyone out there who encountered the same problems and solved
them?

Thank you for your replies! :)
By reading your answers I became aware of another fact: we
use a german version of RoboHelp 7 on german or multi language
versions of Windows. I set up a VM in English this morning (US
version of WinXP SP 2, US version of Office 2007, English RoboHelp
7 Demo). Indeed I had NO Problems. So it may be an issue of the
german version of RH7.
Of course I know how to set a non scrolling region manually
for a topic. But the result remains the same (for the german
version of RH7). Creating a new project you face the default
document. Now I was adding some topics (in the following linked
screenshot ‘Topic 1’ and ‘Topic 2’). If you
now add non scrolling regions to all the topics (manually or
automatically), the result will be as follows:
http://img223.imageshack.us/my.php?image=nsr01gg6.gif
After compiling the first topic in the document will have a
non scrolling region, the others won’t. As I said in my first
post, the problem only occurs in the default document. Creating a
new document the topics with non scrolling regions look like this
and compile correctly:
http://img220.imageshack.us/my.php?image=nsr02fm5.gif

Problem with Connecting to VPN after migrated to snow leopard

Hi,
I recently migrated to Snow Leopard server, I have a strange issue when connecting to the VPN Server.
Please find the below error.
Fri Jan 1 14:38:22 2010 : CHAP peer authentication succeeded for jasmine
Fri Jan 1 14:38:22 2010 : DSAccessControl plugin: User 'jasmine' authorized for access
Fri Jan 1 14:38:22 2010 : MPPE required, but keys are not available. Possible plugin problem?
Fri Jan 1 14:38:22 2010 : sent LCP TermReq id=0x2 \"MPPE required but not available\"
Fri Jan 1 14:38:22 2010 : Connection terminated.
Fri Jan 1 14:38:22 2010 : Connect time 0.0 minutes.
Fri Jan 1 14:38:22 2010 : Sent 0 bytes, received 0 bytes.
Fri Jan 1 14:38:22 2010 : PPTP disconnecting...
Fri Jan 1 14:38:22 2010 : PPTP disconnected
2010-01-01 14:38:22 IST --> Client with address = 192.168.1.76 has hungup
Please let me know what is the cause and how can i fix it.
Thanks,
Gulab Pasha

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems with Creating New Users after migration to EOP

Similar Messages

Maybe you are looking for