Problem with creating links with WPC (SP 14)

Hi,
I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linked site (outside the WPC) shows a blue background and/ or has no navigation frame (on the left side & no breadcrumb-navigation on top).
If I create links with the left button in the WPC via URLs I have the problem with the inserted URL, because sometimes (I don't know why und when) some parts of the code in the URL changes, so that the linked Website is empty (besides the navigation fram - the content isn't displayed anymore). To me it looks like as if the originally website cannot be "found" anymore.
Does anyone has the same problems and is eventually able to help me? This would be really great. Thanks!

Hi,
you have also to deploy the following file from Service Marketplace:
Patch for SP14 for KMC WEB PAGE COMPOSER 7.00
Than it will works. The best way is you deploy WPC SP 15.
If you want i can send you this file via email.
regards,
Sharam
Edited by: Seed mopo on Apr 28, 2008 11:45 AM

Similar Messages

  • Problem with WPC and Top Level Navigation

    Hi all...
    I have one problem. I'm using WPC and my role name is shown in Top Level Navigation (TLN).
    For example:
    Role name: Test
    navigation nodes: company, About Us, Finnancial, News...
    "Test" role is shown on TLN first level and the first level of navigation node is shown on TLN second level.
    How can I remove the role name from TLN first level? I already changed the entry point parameter to "No" however this case the navigation node disappear from TLN.
    tks

    Praveen,
    How can I set the "No" Entry Point parameter to my navigation nodes??
    In my role configuration I only changed the External Connector and Entry Point Parameters.
    Where can I set up the No entry point parameter for my navigation nodes?
    Regards

  • Problem In creating link between info source to DSO(Urgent)

    Dear Experts,
    I am facing an problem in creating an link between info source and DSO.My problem is: I am actually loading data from R/3 into two data sources 2lis_01_s951 and 2lis_01_s952 there is a need for me to calcualte revenue % i.e diving revenue by qty from different data sources so i created one Info Source for 2 data sources,So i am facing a problem in creating an link from Info Source to DSO.Is there any other way to solve this problem.
    Points will be awarded.
    Regards,
    Shivu.

    Shivu,
    I’m suggesting either of the following 2 solutions.  Both of them require some abap programming.
    A. Permanently store calculation result in DSO :
    A1) You’ll need to decide which of the 2 DSOs you want to store the result of the % calculation, then add a new infoobject for that purpose;
    A2) Load ALL the data into the DSO that will NOT store the result of the % calculation; let’s call this DSO “DSO1”.  The data records in this DSO will be retrieved later on when loading the other DSO;
    A3) For the DSO that will store the result of the % calculation (let’s call this DSO “DSO2”),  create a transformation rule (i.e. update rule) that will SELECT the related data record from DSO1 and carry out the calculation before storing the data record in DSO2 ( this can also be done in the Start Routine to loop through all the data records of a packet.)
    B. Carry out the calculation at query time :
    B1) Create a multiprovider (i.e. multicube or infoset) to combine your infocubes or DSOs together.  Keep in mind that a multicube works as a union of the infoproviders, while an Infoset works as a join of the infoproviders.
    B2) Create a formula in your query to calculate the %.
    Hope this helps.

  • Problem with creating links with the WPC (SP14)

    Hi,
    I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linked site (outside the WPC) shows a blue background and/ or has no navigation frame (on the left side & no breadcrumb-navigation on top).
    If I create links with the left button in the WPC via URLs I have the problem with the inserted URL, because sometimes (I don't know why und when) some parts of the code in the URL changes, so that the linked Website is empty (besides the navigation fram - the content isn't displayed anymore). To me it looks like as if the originally website cannot be "found" anymore.
    Does anyone has the same problems and is eventually able to help me? This would be really great. Thanks!

    Hi,
    you have also to deploy the following file from Service Marketplace:
    Patch for SP14 for KMC WEB PAGE COMPOSER 7.00
    Than it will works. The best way is you deploy WPC SP 15.
    If you want i can send you this file via email.
    regards,
    Sharam
    Edited by: Seed mopo on Apr 28, 2008 11:45 AM

  • Remote Delta link setup problem with Bean / Access Service

    Hello,
    I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
    I already have the Remote Role Assignment working without any issues.
    The following have been done successfully:
    1. Same user repository has been setup for both the portals
    2. Setup trust between producer and consumer (SSO working fine)
    3. Producer added and registered succesfully on consumer
    4. Permissions setup on producer and consumer
    4. pcd_service user with required UME actions setup
    I am able to see all the remote content in the Consumer portal.
    When I try to copy the remote content and paste it as local content, I am getting the following error:
    Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
    After increasing the log severity, I am able to see the following in Default Trace:
    com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
    com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
    AbstractAdvancedOperation.handleDirOperationException
    [EXCEPTION]
    com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
    Could not retrieve the bean / access service to connect with producer
    Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
    I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
    I am stuck at this point and am not able to find any information on this.
    I would really appreciate if some one can point me in the right direction.
    Thank you for reading.
    - Raj

    Hi Raj,
    Please check your config of the P4 port on the producer.  Is it really 50004 (check SystemInfo of the producer)?
    I do think there's a problem with the P4 communication since RDL requires P4 connection.
    Do you have load balanced consumer-producer connection? Please refer to this blog for further details
    Little known ways to create a load balanced Consumer – Producer connection in a FPN scenario
    Regards,
    Dao

  • Problem with links on email templates

    Problem with links on email templates
    Hi,
    We have been having issues with links on our email templates. Some of the links point to the following URL:
    http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
    Sometimes we get “Unknown internal error” on the web page.
    Can anyone help or advise on how to resolve this issue?
    Many thanks,
    Wesley.

    Hi Wesley,
    This is rather late, but we've seen the same thing frequently (and I believe can replicate it).  It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
    Upon copying, the link gets scrambled.  The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
    Thanks!
    Ant

  • Problem with links for external user

    Hi,
    We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
    The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
    Thanks for help,
    Sven Keller

    We already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
    If somebody receives an email (e.g. subscription) the URL to the folder is:
    http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
    But it should be:
    https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
    Message was edited by:
            Sven Keller

  • How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

    We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
    A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
    If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
    We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
    So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
    Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
    It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
    I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
    It is inconsistent.
    Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
    If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
    If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
    So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
    Or do we need to play this game of crop and trim the image so that it doesn't drop out?
    Any thoughts, advice, direction would be gratefully received!

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • Problem with using database link from oracle 7 to oracle 9i

    Hi To Every One
    I have two oracle database oracle 7.3.4.0.1 and oracle 9i 9.2.0.1.0.
    and the tns alias to connect to oracle 9i database is oracle9i and tns
    alias to oracle 7 database is oracle7.I have no problem in connect to
    these database using these tns aliases from either database.The tns
    alias for oracle 7 is available in tnsnames.ora file of oracle9i and
    tns alias for oracle 9i is available in tnsnames.ora file of oracle 7.
    So there is no connection problem from each other.Connection is
    working fine for each other but the problem with database links is
    like this
    Problem:
    when i create database link from oracle9i user or public database link
    from oracle9i for oracle7 user like this
    SQL ORACLE9I >CREATE DATABASE LINK ORACLE7 CONNECT TO <ORACLE7USER>
    IDENTIFIED BY <PASSWORD> USING 'ORACLE7';
    OR
    SQL ORACLE9I >CREATE PUBLIC DATABASE LINK ORACLE7 CONNECT TO <ORACLE7USER>
    IDENTIFIED BY <PASSWORD> USING 'ORACLE7';
    The links get created sucessfully but when i write command like
    SQL ORACLE9I> DESC <ORACLE7USER_NAME>.<ORACLE7USER_TABLENAME>@ORACLE7
    I RECEIVE A ORACLE ERROR LIKE
    ORA-12663 SERVICE REQUIRED BY CLIENT IS NOT AVAILABLE ON THE SERVER.
    OR IF MY COMMAND IS LIKE
    SQL ORACLE9I> SELECT <FEILD_NAME> FROM
    <ORACLE7USER_NAME>.<ORACLE7USER_TABLENAME>@ORACLE7;
    I RECEIVE AN ORACLE ERROR LIKE
    ORA-01002 FETCH OUT OF SEQUENCE.
    ORA-02063: preceding line from ORACLE7
    BUT IF I CREATE A LINK FROM ORACLE7 USER FOR ORACLE9I USER
    IT WORKS FINE.
    PLZ HELP ME WHAT IS THE PROBLEM THAT THE LINK FOR ORACLE 7 IS NOT WORKING WHEN
    IT IS BEING CREATED FROM ORACLE9I.
    Thank u.

    Oracle 9.2.0 does not support connectivity to Oracle 7. The newest version that will support this is 9.0.1.

  • Problems with Dinamic Link between Premiere pro CC and After Effects CC

    I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
    The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
    I've got a huge workstation:
    i7 4990
    32Gb ram
    GTX780 3gb
    256 gb system ssd
    2 Tb project storage
    *All my hardware and software are update.
    I know that a lot of folks are on the same huge problem and I want to ask everyone:
    How do you save this?
    What is your pipeline?
    Are there any solution?
    Best practice to use dinamic link in a huge project?
    Thanks,
    Ruben Gimenez.
    R&D iceblink.es
    www.rambot.es

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • I'm having a problem with inserting a photo gallery created with Bridge

    I sure could use some help.
    Adobe Bridge - Why do I have a white bar on my page?
    I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
    I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
    my css places the album in #photoalbum.
    #photoAlbum contains the i-frame with the following properties:
    #photoAlbum {
    margin-top: 20px;
    margin-right: auto;
    margin-bottom: 0px;
    margin-left: auto;
    width: 900px;
    text-align: center;
    padding-top: 20px;
    padding-bottom: 20px;
    border-top-width: 2px;
    border-top-style: groove;
    border-top-color: #333;
    I tried changing the width to 960, 900, 850 etc with no success.
    I have tried making the background of #photoAlbum black with no success.
    The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
    The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar.  If you go to /PhotoAlbum/index.html there is no white bar.
    Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

    insert the following into your code,
    scrolling="no"
    it should look like this
    <div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html"  scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
    hope it helps, good luck

  • Link Problem with port 2 in WLC 4402

    Hi,
    I have a problem with port 2 in Wireless Lan Controler 4402. The problem is that the distribution port 2 of the WLC not link with the switch (3750). We receive the WLC and we follow the autostart wizard and we enable LAG. The wizard finish, I restart the system and all works fine. The two distribution ports of WLC, 1 and 2 appears UP and the LAG works correctly. After this we upgrade the firmware of the WLC to the version AIR-WLC4400-k9-6-0-182-0.aes and we restart the system again but at this time port 2 does not link and port 1 link OK. We do not know the reason why port 2 doesn´t link? Could you help me ?
    Thank in advance.
    Regards.

    Does it properly refuse authentication ? Or does the login page stop appearing or something ?
    There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
    One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
    I'm not aware of any maximum of usage of the same account.
    Which 4.2 exactly are you running ?

  • Problem with creating new user in portal = portlet is not visible

    Hi,
    I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
    How can I make this portlet visible?
    Please Help
    thank you...
    Gilbert

    Hi..my problem slightly similar.
    I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
    I expect the user will be a public user.
    But, when he try to logged in the portal,
    He cannot see all the PORTLETS related to database values..
    All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
    So, what did i do wrong?
    Plz Advise, and thanks.

  • Indesign CS6 on MACs with OS 10.8 are having problems with links

    Hi
    Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
    We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
    Any further information required?
    M. Miller

    Thanks for your quick reply.
    We actually noticed that there also seems to be something wrong with the timestamps:
    If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
    If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
    We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
    Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
    Have you heard anything similar?

  • Adobe Standard 6.1 Problems with links

    Hyperlinks in pdf's don't work.
    I have created a 9 page newsletter in Microsoft Word. Each page contains articles with various types of hperlinks. Most of these links contain a "click here" type instruction. In the first 6 pages the links work well. In the last 3 pages some links work but most don't. In the past the newsletter has gone well using this process until lately. Over the last month 4 staff have started having problems with these links when converting a Word document to a pdf using Adobe Acrobat 6.1. We re-installed the program on our pc's and the server and downloaded updates. One staff member uses 8.0 Professional and he had problems with the links this morning too. Our IT help desk people can't help us and we MUST get our newsletter onto our website today. Any suggestions would be extremely welcome.

    First, be sure you have updates to AA6.0.6, the lastest version of AA6. I have no idea about any AA6.1. How did you create the PDF? To get the links to work properly you need to use PDF Maker. Printing to PDF will allow links, but they are only those that Acrobat or Reader recognize as such and are not actually built in links. If you start getting into non-standard URLs that include spaces and punctuation, then Acrobat will not properly recognize the links.

Maybe you are looking for