Problem with Customer variable

hi
from improper installation of coldfusion "Customer variable
in the registry I changed the configuration to the cookies but I
have error in event log
"An I/O operation initiated by the Registry failed
unrecoverably. The Registry could not read in or write out or flush
one of the files that contain the system's image of the Registry. "
and my registry is full, this key
HKLM/Software/Macromedia/coldfusion/CurrentVersion/clients
and each time you restart the coldfusion the old entered the
back regitre
thank for help
patrick

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Problem with custom tag

I have written a custom tag that I am having problems with. It works on some machines, but not on others. I have a page that uses many 'standard' tags. I have correctly set the URI etc, because all of my other tags work. However, on some machines, my custom tag gives me an error:
attribute does not support request time values
I'm assuming that I have the correct versions of standard.jar etc because all of the regular jstl 1.1 tags work. It is just my custom tag that throws an error.
here is the .tld for my tag:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>
 <tlib-version>1.1.2</tlib-version>
 <jsp-version>1.2</jsp-version>
 <short-name>My custom tag</short-name>
 <uri>http://my.custom/tags</uri>
 <tag>
 <name>breadcrumb</name>
 <tag-class>tag.BreadcrumbTag</tag-class>
 <body-content>JSP</body-content>
 <attribute>
 <name>breadcrumbs</name>
 <required>true</required>
 <rtexprvalue>false</rtexprvalue>
 <description>Pass in the list of Breadcrumbs containing the actual information
about what tags need to be rendered on the page.</description>
 </attribute>
 </tag>
</taglib>
Any thoughts/help greatly appreciated...

I encountered the same problem in our environment. I did the same thing as
 James. Simply re-initialize all variables in the do end tag.
 Also, with the nested tags you use you may also need to implement cloneable
 in the inner tag if the outer tag keeps references to all the inner tag
 instances.
 For instance if the outer tag kept a vector of references to the inner tag,
 then you would need to use clone() on the inner tag before adding it to the
 vector.
 "James Lynn" <[email protected]> wrote in message
 news:3af05d29$[email protected]..
 > > But
 > > with WL 6.0, the cell tag handler reuse the same instance each time the
 > cell tag
 > > is called and the member field is not reset
 >
 > I had the same problem. As a work around, I reinitialize everything in my
 > doEndTag() method and it works.
 >
 >
 > --
 > James Lynn - Lead Software Architect
 > Oakscape - Java Powered eBusiness Solutions <http://www.oakscape.com/>
 >
 >

Problem with custom navigation bar

I'm trying to create a custom left navigation bar with adaptive tag. when user click on the link it will direct to a pagelet which is created with page template. How can I do it? I don't understand what is pt:objectid? Where can I look for answer? I just need a simple example. Thank you.

You can get the object id from the "Edit this Community" feature under "My Communities" then look in "properties and names". If you look in the address bar you could also see the objid in there (objId=1234). I was having problems with this too.
What I did was use the ptdata tag like this:
<div id="topNav">
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
<ul>
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>
</ul>
</div>
This is for a community that has subcommunities. you could also do the same thing with pages instead.
Short explaination:
This line sets up a data object for the current community data and assigns it the variable name "currcomm":
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
This line gets the subcommunities for a particular community (in this case commid="1234" ). You specify which community with the pt:commid.
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
I used a <ul> for it but you could really do it any way you want.
I added a static "home" tab that will always link to my top level page of the community. this is optional and there may be a better way of doing it:
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
for a link to your page you can use this tag. You can get both the objectid and classid from the "properties and names" page as mentioned above. pt:mode is how/what should be displayed (The action of the link (Opener mode). 1 = Open, 2 = View, 3 =ViewMeta.)
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">
I also have a choose in there to test if the current community you're in is the same as the community of the link. That lets me add a class="down" for a down state. 
This loops through all the subcommunities and builds a link in this format <li>TITLE OF COMMUNITY</li>. 
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>

Hopefully that is what you're trying to do.
Like I said, you can use the same process for pages instead of subcommunities by using the communitypagesdata tag instead of subcommunitiesdata. You could also combine the two and list all the subcommunities with a foreach loop and inside each loop get the pages from the communitypagesdata with the commid set to the subcommunity objid for that subcommunity.
THis document is very helpful with PT tags... [url http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html]http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html
-Matt
Edited by thelimpingtoad at 03/14/2008 5:55 AM

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( " The current user is no
longer valid, please log in
> again." & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with custom form

Hey All,
Has anyone ever experience a problem with maximizing or resizing their custom form? I have a rather large form that every time I try to maximize or resize causes Business One to hang and crash.
Any ideas what might be causing this?

Hi Curtis,
Thanks for posting the solution... will keep it in mind!
Thanks,
Adele

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with Customer variable

Similar Messages

Maybe you are looking for