Problem with date and time preference

hi there,
i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
any idea what should i do?
thanks in advance
regards AL

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

Similar Messages

Problem with date and time syncing itouch to macbook

i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
please help!!!!

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

When I create a calendar, in iphoto 8, I had an information pane lower left corner with date and time of the picture. Can it possibly be that the iphoto developers forgot about that in iphoto 9? This was very helpful when placing images according to date.

Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
Thanks for ANY help!
Patrick

The first is that I can't view the aperture library anymore directly from iphoto.
THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
LN

CRYSTAL REPORT GRAPH WITH DATE AND TIME

Post Author: Dino Dentone
CA Forum: Charts and Graphs
Dear forum,
I am developing a Visual Studio .net 2005 Windows Form,i have a sql table with 2 field:1) DATA (date and time)2) Temperatura (numeric)I have to make a line graph with numeric data axes.I have insert two parameters' to customize the filtering, so i can have a graph of the temperature between to date and time.If i choose two date's and time (parameters) like 20/04/2008 00:00:00 trought 20/05/2008 00:00:00 i have no problemBut if a choose a range minor of 1 day (some hours like from 15/05/2008 00:00:00 trought 15/05/2008 08:00:00) i have no graph.It sound like it don't use the time values?Thank's for the Help.

There is some debugging info on the website. I've had problems getting the text to work. It was generally that I installed either the wrong 'version' of ImageMagick (the recommended one works for me--I'm running Vista x64 and one time installed the x64 version and it didn't work). I also installed Ghostscript to get the font list to work correctly. At one time I installed the x64 version of Ghostscript and it didn't work with the plug-in, either.
I installed two items:
ImageMagick: ImageMagick-6.4.9-3-Q16-windows-dll.exe
Ghostscript: gs863w32.exe
I don't know if it is necessary but I also added the fonts from
ghostscript-fonts-std-8.11.tar.gz to the c:\Program Files (x86)\gs\fonts directory. Some, none, perhaps all, may already be installed just by installing ghostscript--it has been so long that I don't remember exactly. I do know that the contents of the gs fonts directory contains all the files in the .gz, I just don't remember if I put them there separately or as part of the gs install :)
You need to make sure the font size is large enough. I usually use about 2-4% of height and export a single photo to make sure I see the text correctly.
Tim does respond to email when he can so if you can't get it to work you can always drop him a line.

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

Script to find locks in Database with Date and time.

Hi all,
I used to have a script which i have lost now due to a recent laptop crash. This script used to find locks in the database.. along with the date and time since when it is locking the session.
It was quite a comprehisive one. I think i found it on this forum only, but not able to find it now. Can someone please help me find one such comprehensive script.
Currently I am using this script.. which is also good.. but does not have the date and time stamp on it. Is there something better.?
SET LINESIZE 165
SET PAGESIZE 66
COLUMN oracle_user     FORMAT a15      HEADING 'Oracle User'
COLUMN usercode        FORMAT a12      HEADING 'SID/Serial#'
COLUMN os_user         FORMAT a10      HEADING 'O/S User'
COLUMN program         FORMAT a25      HEADING 'Program'
COLUMN mode_held       FORMAT a15      HEADING 'Mode Held'
COLUMN mode_requested FORMAT a15      HEADING 'Mode Requested'
COLUMN lock_type       FORMAT a15      HEADING 'Lock Type'
COLUMN object_name     FORMAT a30      HEADING 'Object Name'
COLUMN lock_time_min   FORMAT 999,999 HEADING 'Lock Time (min)'
SELECT
s.username                                 oracle_user
+, l.sid || '/' || s.serial# usercode+
+, s.osuser os_user+
+, s.program program+
+, DECODE(l.lmode,+
+1, NULL,+
+2, 'Row Share',+
+3, 'Row Exclusive',+
+4, 'Share',+
+5, 'Share Row Exclusive',+
+6, 'Exclusive', 'None') mode_held+
+, DECODE(l.request,+
+1, NULL,+
+2, 'Row Share',+
+3, 'Row Exclusive',+
+4, 'Share',+
+5, 'Share Row Exclusive',+
+6, 'Exclusive', 'None') mode_requested+
+, DECODE(l.type,+
+'MR', 'Media Recovery',+
+'RT', 'Redo Thread',+
+'UN', 'User Name',+
+'TX', 'Transaction',+
+'TM', 'DML',+
+'UL', 'PL/SQL User Lock',+
+'DX', 'Distributed Xaction',+
+'CF', 'Control File',+
+'IS', 'Instance State',+
+'FS', 'File Set',+
+'IR', 'Instance Recovery',+
+'ST', 'Disk Space Transaction',+
+'TS', 'Temp Segment',+
+'IV', 'Library Cache Invalidation',+
+'LS', 'Log Start or Log Switch',+
+'RW', 'Row Wait',+
+'SQ', 'Sequence Number',+
+'TE', 'Extend Table',+
+'TT', 'Temp Table',+
l.type)                                 lock_type
+, o.owner || '.' || o.object_name+
+|| ' - (' || o.object_type || ')' object_name+
+, ROUND(l.ctime/60, 2) lock_time_min+
FROM
v$session     s
+, v$lock l+
+, dba_objects o+
+, dba_tables t+
WHERE
l.id1            = o.object_id
AND s.sid            = l.sid
AND o.owner          = t.owner
AND o.object_name    = t.table_name
AND o.owner          <> 'SYS'
AND l.type           = 'TM'
ORDER BY
+1+
+/+

What Brian said is true so are your sure your query was not just reporting the start time of the current transaction from v$transaction.start_time, or the start time of the session: v$session.logon_time, or perhaps the time since the last database call (v$session.last_call_et) which for an active session would be the time the current SQL statement has been running?
HTH -- Mark D Powell --

Name of the file (in utl_file) with date and time

Instead of the below:
vHandle1 := utl_file.fopen('/home/oracle/testdir', 'test.csv', 'W');
I want something like this:
vHandle1 := utl_file.fopen('/home/oracle/testdir', 'test19dec200611.35.csv', 'W');
i.e the name of the file should have the date and time too so that every time the original is not overwritten.
Is this possible?

OR maybe we can use this:
utl_file.frename('/home/oracle/testdir','test.csv,'/home/oracle/testdir','test'||to_char(sysdate,'DDMONYYYYHH24:MI')||'.csv',TRUE);
Will it work?
Can we download this file and open it through oracle (and not any front end like ASP etc.)

Create a folder with date and time

hey yall. i'm working on a program to assign files to a created directory. for the sake of organization, i want to create a folder that is the date and time it was created. (ie c:\\new\\02-Jun-2008\\file.txt) i know i'm missing something. here's the code i have so far to create the folder:
Format formatter;
Date date = new Date();
formatter = new SimpleDateFormat("dd-MMM-yy_hh:mmaaa");
String s = formatter.format(date);
String path = "C:\\new\\";
String destination = path + s;
File d = new File(destination);
d.mkdirs();
i know its trivial for any advanced user but im only a student and any advise or useful links are great. i'll keep searching in the meanwhile. thanx.

got it myself. failed to remember NO : are allowed in windows. <sigh>

Working with data and time

Hi,
I want to know how can i access server date and time and
display it in my flex page on a label
plz help me finding solution
regards
Rajeeva

Hi,
I want to know how can i access server date and time and
display it in my flex page on a label
plz help me finding solution
regards
Rajeeva

Problem with date and timezone

Hello,
I am encountering a problem with the command new java.util.date() on a hpux 11 machine.
The "date" from command line returns:
Tue Oct 26 18:02:02 MEST 2004
And the date from java returns:
Tue Oct 26 17:02:02 GMT+01:00 2004
It is as if the JVM was running on another timezone than the machine. The only change we made is an upgrade from java 1.2.2.04 to 1.2.2.17. Our old java program running since 2000 hasn't changed nor the others environment files.
Does anyone has an explaination? Javadoc for jav.util.date does not speaks of timezone.
Thanks in advance,
Valere

I have tried, it is the same pb with java 1.4.
How to set the default timezone for a JVM?
Concerning the patch, we have several others worksations running well with 1.2.2.04 (except a small display bug that i wanted to correct by upgrading the JVM). To my knowledge, this patch is not installed on any of them.
Another way to investigate, it seems that the java version installed on the others stations refers to java 3D. What is it? It has a different architecture than standard jre, but java -version seems exactly the same (except the version number itself).
Mayday, mayday!

Problems with FaceTime and Time Capsule?

I was wondering if anyone who uses Time Capsule for their WiFi router has ever experienced any problems with FaceTime? I use that as my router out of state, and when placing calls to my Mom, she has a LinkSys router. Every time I go to try a FaceTime call, the sound is spotty, and then the call eventually craps out. However, Skype works just fine. During a recent visit to her home, I tried a FaceTime call and it worked just fine, which led me to wonder if it had anything to do with us having separate routers, or if it's a strength of the Internet connection signal? Was just curious if anyone else had similar issues? Thank you in advance!

Sounds like a Internet connection problem to me, probably too slow.
You can try identifing the more problematic router/Internet connection by FaceTime calling a iPhone on a 3rd Wi-Fi network. If it works from your location but not your mom's, then your mom's router or Internet connection is the problem. You can further narrow it down by switching routers after finding the location that has the problem.
You can check the speed of the Internet connect and make sure the wireless router is updated and configured correctly.
WTH.

Having problems with data and messaging.

I am having an issue with my net and messaging for my phone, and have been having these issues going on 3 weeks now. I still cannot receive nor send any photos or emails and the only internet or data access I can get ANYWHERE is inside my home. My mobile Data doesn't work and even if I sync to other wifi networks I cannot access the internet at all. I also bought the 3gig bridge data pack, and got the confirmation e-mail but it has not been added to my account and I bought it 2 weeks ago...
ALSO, I cannot reveive or send any picture messages anymore. Sice, number, it doesn't matter, I can't do it. It's upsetting because I would like to share the photos from a recent trip with family and friends.
This is VERY frustrating since I have only had this phone for a month.

whitewaltz, Help has arrived! We understand how important it is to make sure all of the features on your device are up and running and we'd love to take a closer look. What model phone do you have? What zip code are you experiencing this issue in? Are multiple users affected? Has this affected voice calls? How many bars of service do you have on your device when experiencing this issue? EfrainM_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Need help with date and time calculations please

Hello there.. Im stuck, and im hoping someone can help..
Working on a list to manage and track PTO. User completes PTO request form,
Fields
Name
Start Date (with time)
End Date (with time)
Total Number of Days/hours requested: (calculation)
Full Day: (Yes/No)
ok business need
user has the ability to request a certain number of hours as opposed to a full day.
After searching around on google. I found this calculation to help me figure out how many BUSINESS days being requested.
=IF(ISERROR(DATEDIF([Start Date],[End Date],"d")),"",(DATEDIF([Start Date],[End Date],"d"))+1-INT(DATEDIF([Start Date],[End Date],"d")/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End
Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End Date])=7),1,0))
This works great as long as its a [Full Day]="YES", displays results in column labeled Number of days
now if [Full Day]="No", displays results in column labeled Number of Hours
BUT this is my issue (well part of it) it calcuate the correct number of hours.. but puts a "1" in "Number of Days" why.. dates have not changed.. I think Its something with the above calculation but I could be way off.
the end result is I need number of days to concat with number of hours
i.e 1 full day 4 hours 1.4
0 full day 5 hours 0.5
1 full day 0 hours 1.0
so that the total can be deducted via workflow.. from the remaining balance in a tracker. (seperate list)
Any angels out there??

Posnera-
Try changing time zones and see if the travel itinerary times change.
Fred

Problem with date and time preference

Similar Messages

Maybe you are looking for