Problem with exporting SWF for web - missing last 5 seconds

Hello everybody.
I´ve got this problem that when I render my animation everythings OK, but when I try to export it as SWF it doesn´t include last 5 seconds. There are only shapes & solids used in the animation (masks, scale etc.) so pretty simple stuff. Animation has 35 sec. Is there any time limit or do you have any ideas how to fix this? I checked rasterize all unsupported features that did nothing.
AE CS6
Thank´s a lot,
Marek

This could be a bunch of things. It could be that the last five seconds are using an effect that is not supported so it needs to be rasterized. Frankly, AE is a lousy, let me repeat that, lousy tool for creating SWF files. Your best option is to render a video compressed in the H.261 format and use Flash to embed that video in your SWF file. The SWF will load quicker, be smaller, play on more devices and be more professional. The project will still not be mobile compatible which, now days, means you're losing 60% of your audience.

Similar Messages

  • Captivate 5.5: Problems with export SWF to MP4

    I recorded a screencast of several moving graphs by using the FMR-mode in Captivate 5.5. The flash file looks pretty good, but I am unhappy with the MP4 that I exported afterwards because it is jerky. Is it usual that there are losses due to the compression or did I just use the wrong settings? Is it possible to export an MP4 file that looks just as good as the SWF? Do you have any recommandations regarding the settings?
    I am inserting some features with Final Cut afterwards. To avoid further compression losses, I would appreciate some hints regarding the settings in Compressor. The final file shall be an MP4.
    Do you think with the HD screencast function of Captivate 6 or 7, my problems would be solved?
    Thanks a lot for your help!

    Hey Lilybiri,
    thank you for your answer. I tried pretty much everything, default settings like SD / HD widescreen as well as custom settings in all different kinds. I even implemented a 30 frames-extra (http://www.tecwriter.de/wordpress/captivate-5-5-exklusiver-spezialtipp-mp4-output-verbesse rn/), but nothing helped. and i am not sure, if captivate's FMR function is the problem, as the swf is much less jerky. 

  • Problems with exporting PDF for Print

    Hi all,
    I would appreciate some help with exporting my indesign document (using v9.2, 32x) to PDF for print.
    I have a number of images and text objects in the document and all links seem to be in place.
    However when I come to export the document to print PDF, the PDF file is corrupted and has a size of 0 bytes. The export worked fine earlier when I did a test, but since I have added a few more images, everytime I go to export it, it will not work!!
    I would be grateful for any help with this, it is infuriating when I have deadlines to meet! Many thanks.

    I'd try a 'save as idml', reopen, then export.
    If no go, rename your images folder (if separate) to break the links to images, and try exporting just the previews (you can't use this output, but it will tell you if there's a bad original image file). If a bad image, open images and re-save.
    If still no go, try a full computer shut down and try again...

  • Problems with exporting display for oracle apps installation

    Platform : RedHat Enterprise Server 4
    I'm trying to do a 2 tier installation of Oracle Applications.
    As part of the install, I need to generate a display that can be used by the applmgr user, but bellongs to another user.
    When running the following command line, I get an error message.
    xauth -f .Xauthority extract - $DISPLAY | rsh -l applmgr localhost /usr/X11R6/bin/xauth merge -
    connect to address 127.0.0.1: Connection refused
    Trying krb4 rsh...
    connect to address 127.0.0.1: Connection refused
    trying normal rsh (/usr/bin/rsh)
    localhost: Connection refused
    Does anyne have an idea? I've done some troubleshooting, but I can't figure out what is wrong.
    I have added the following in the xmgr and applmgr's profiles
    DISPLAY=localhost:13
    export DISPLAY
    The vnc server runs on display 13

    These are the scripts/files I'm using for installing Oracle Apps 11.5.10 on CentOS 4.2 (RedHat Clone) - hope it helps:
    install.sh - adds necessary packages
    yum install libaio
    yum install openmotif
    yum install gcc
    yum install gcc-c++
    mv /usr/bin/gcc /usr/bin/gcc344
    mv /usr/bin/g++ /usr/bin/g++344
    rpm -iUhv compat-gcc-7.3-2.96.126.i386.rpm
    rpm -iUhv --nodeps compat-gcc-c++-7.3-2.96.126.i386.rpm
    ln -sf /usr/bin/gcc296 /usr/bin/gcc
    ln -sf /usr/bin/g++296 /usr/bin/g++
    setup.env - Setup paths
    # Oracle Setup Environment
    ORACLE_SETUP_APPS=/setup/oracle/install/ebusiness/startCD
    ORACLE_SETUP_PATCH=/data/setup/install/db
    oracle.env - Installation environment
    # Oracle Environment
    ORACLE_BASE=/d01/oracle
    ORACLE_HOME=$ORACLE_BASE/visdb/9.2.0
    ORACLE_VAR=/var/opt/oracle
    ORACLE_SID=VIS
    ORACLE_TERM=xterm
    # export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
    NLS_LANG=AMERICA_AMERICAN.UTF8
    #ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
    export ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM NLS_LANG ORA_NLS33
    LD_ASSUME_KERNEL=2.4.19
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
    export LD_ASSUME_KERNEL LD_LIBRARY_PATH
    # Set shell search paths
    export PATH=$PATH:/usr/sbin:/sbin:$ORACLE_HOME/bin
    oracle - Kernel Parameters
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    kernel.shmmni = 4096
    kernel.sem    = 250 32000 100 128
    fs.file-max   = 65536
    net.ipv4.ip_local_port_range = 1024 65000
    net.core.rmem_default = 262144
    net.core.rmem_max     = 262144
    net.core.wmem_default = 262144
    net.core.wmem_max     = 262144
    setup_oracle_1.sh - Installation Step 1 : Add oracle user
    #!/bin/sh
    PATH=$PATH:/usr/sbin
    groupadd dba          # group of users to be granted with SYSDBA system privilege
    groupadd oinstall     # group owner of Oracle files
    useradd -m -c "Oracle software owner" -g oinstall -G dba oracle -s /bin/bash
    passwd oracle
    setup_oracle_2.sh - Installation Step 2 : Prepare installation directory
    #!/bin/sh
    . ./oracle.env
    BASE_DIR=/`echo $ORACLE_BASE | cut -d'/' -f2`
    mkdir -p $ORACLE_BASE
    chown -R oracle:oinstall /$BASE_DIR
    chmod -R 775 $BASE_DIR
    mkdir -p $ORACLE_VAR
    chown oracle:dba $ORACLE_VAR
    chmod 755 $ORACLE_VAR
    setup_oracle_3_apps.sh - Installation Step 3 : Start installer
    #!/bin/sh
    . ./oracle.env
    . ./setup.env
    sysctl -p ./oracle
    su oracle -c "export DISPLAY=:0.0 && $ORACLE_SETUP_APPS/Disk1/rapidwiz/rapidwiz"There are some steps afterwards, but with this I'll usually end up with a complete installation.
    C.

  • Problems with passing parameters for WEB template in URL in NW2004s

    Servus,
    We have NW2004s, BI 7.0, SP9
    does anybody know where do I make a mistake? There are 9 variables which the user has to fill out.
    Passing the parameters in URL string for a web template like: http://server:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=TEMPLATENAME&var_name_1=ZvarX&var_value_ext_1=2000 ....
    but this doesn't function, I get only the first variable screen and not what's set in my URL.
    Is it a bug? Any suggestions?
    Thank you very much
    Standa

    I solved it.
    Solution:
    URL Link "http://......./TEMPLATE=nameofthepage&TEMPLATE=nameofthepage
    &VARIABLE_VARIANT=nameofthevariant"

  • Problem with Exporter for MS Access 3.2 in SQL Developer

    Hi,
    I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
    This error ocurr: 'Error #5 - XML Exporter'
    When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
    Any leads how to solve this problem ?

    Thread moved to Forum Home » Database » SQL Developer
    SQL Developer
    Please, stay tune there.
    Nicolas.

  • How can I fix this problem with exporting Pages files?

    Hello,
    I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
    Does anyone know how to fix this problem?
    Thank you in advance!
    Best regards,
    Filipe

    Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
    For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
    Likewise a display might not fail until powered on and off a few hundred times.

  • Automate, Batch problem with exporting files

    Hello.
    I have already used batch many times where i have for example changed image size and then exported it to another folder. So my actoin looked like:
    - image size
    - export
    - close
    Then i have set the batch source and destination folder and it all went smooth. All the work has been done automatically with no click needed.
    Today im having problem however: When i do the above steps photoshop do all these actions to all the source files but saves them all as single file whic is being replaced over and over and over againw ith same name... I dont see any difference in what i have done now and what i have been doing all the time but this time it just do not want to modify and export the modifyied source files with their own names to the destination folded... Im stuck with 1 file in destination folder with source name of the first file in source folder (when i look in that folder during the batch process i see the thumbnail image changing)...
    All i could do to finally finish my work was to delete "export" and "close" positions from the saved action so it started asking me about compression when each file has been modified... It works, finally i have all modified source files in destination folder, but it kept asking me about compression with each file... it can hardly be called automated process.
    Anyone have any idea why it stopped working while it have been working before flawlessly?
    Regards
    Muniek

    When you record the export (save for web),
    if you change the name in export dialog, then
    file will be replaced over and over.
    Do you get a message like this?
    MTSTUNER

  • Problem with exporting a report to excel vial citrix server

    Hi,
    We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .  
    Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
    Can any body have idea on above mentined?
    Regards,
    SK.

    I understand that you're trying to download the file to a local computer  through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

  • I'm having problem with exporting video from premiere pro cc 2014

    I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
    When I click Export and media, the window for exporting appears and it starts exporting video.
    But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
    It literally says it has a problem with compiling, but I don't know what the real problem is.
    I tried many things like restarting computer and Premire Pro but it's no use.
    But it works when I use Adobe Media Encoder CC 2014 for exporting video.
    If anyone knows any possibilities about why this problem happens, please let me know.

    I'm having a similar issue.  When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render.  Randomly, at some point in the process, the render just stops and the ETA just keeps climbing.  I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it.  Even a clean re-install of CC 2014 doesn't work.

  • Problem with exporting devices to non-global zone

    Hi,
    I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
    A create cfg for my zone.
    Here it is:
    $ zonecfg -z sapdev info
    zonename: sapdev
    zonepath: /export/home/zones/sapdev
    brand: native
    autoboot: true
    bootargs:
    pool:
    limitpriv: default,sys_time
    scheduling-class:
    ip-type: shared
    fs:
    dir: /sap
    special: /dev/dsk/c1t44d0s0
    raw: /dev/rdsk/c1t44d0s0
    type: ufs
    options: []
    net:
    address: 194.29.128.45
    physical: ce0
    device
    match: /dev/lofi/1
    device
    match: /dev/rlofi/1
    device
    match: /dev/lofi/2
    device
    match: /dev/rlofi/2
    attr:
    name: comment
    type: string
    value: "This is SAP developement zone"
    global# lofiadm
    Block Device File
    /dev/lofi/1 /root/SAP_DB2_9_LUW.iso
    /dev/lofi/2 /usr/tmp/fsfile
    I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
    What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
    Can anybody help me?
    Thanks for help,
    Marek

    I experienced the same problem on my system Sol 10 08/07.
    Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
    This worked well until recently. Now only the directories are still created.
    It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
    As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
    # cp /dev/lofi/1 ZONEPATH/dev/lofi
    Hope this helps,
    Konstantin Gremliza

  • Problem with Exporting Data to Excel

    Hi Everyone,
    I have problem with exporting the data to a excel file. I am using a XP
    system in German which uses comma "," as the decimal point , and I also set
    "Use localized decimal point*" under the FronPanel Options to be true. But
    the exported excel file can not recognize (or just ignore) the comma for a
    whole column (flow rate), for examle "1,234" (1.234 in non-german system)
    would be 1234. But if I open its text file where the data came
    from by calling Excel directly, there will be no problem. Is this a bug of
    LabVIEW, or I forget some settings?
    Thanks a lot!
    Le
    P.S: The LabVIEW version is 8.2.1 and the Office version is Office2007.

    Hi Le,
    Sound familiar; here in The Netherlands we have the same problem.   That is why we use the English versions for XP and Office.
    I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
    Can you explain a bit more ?

  • Haviing problem with the facebbok for 9800

    i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

    Hello nomanmahmoo, 
    Welcome to the forums. 
    Have a look at this article which may help you out with your issue. 
    Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • URGENT : Problems with exporting a translated application

    Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
    I really have problems!
    Anyone can help me ?

    When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

Maybe you are looking for