Problem with f95 called from make inference rule

I am porting an existing FORTRAN application to a Sun Solaris machine. The application is built with a moderately large make file and the source files span multiple directories (basically grouped by functionality). All foo.f, foo.o and foo.lst files are referenced by their absolute path names within the make file. The Sun Studio 12.3 FORTRAN compiler successfully finds the /home/uid/ ... /foo.f files from all the source directories as input and writes foo.lst files to the same directory as was specified for the matching foo.f file. However, foo.o object files are written to the current working directory from where the make was executed and not to the same directory as the corresponding foo.f file.
Using a different make does not change the outcome.
Changing compilers (with no other change to the make) restores the proper functionality for writing output files to the same directory as was specified by the corresponding *.f locations.
Have I found a bug or am I just making a newbie's mistake ?

Sorry, I missed that info. I can reproduce the problem when combining -Xlist with -c option only.
Look like we have a bug with the new driver when combining the two output options and producing the two output files in the same compilation.
In this case, the -Xlisto is still accepted and produces the output .lst file at the specified location but the -o option for the ,o file is completely ignored. Is that what you ran into ?
Since the -Xlist option is not needed to build the application, you can work around the problem by removing the -Xlist option to build the app and use the -Xlist option only when you need to look at the .lst file.
Sorry about the trouble.

Similar Messages

Problem with incoming call from pstn

Hi,
we have a 2610XM router with CCME 3.2 and 4 bri
and we don't redirect incomming call from pstn on a internal IP Phone.
which command for redirect call ?
my isdn number (french) is 0156838050
and when we call this number with my mobile (number 0685284832), look this debug
debug isdn q931:
Mar 22 12:53:46.350: ISDN BR1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
*Mar 22 12:53:46.378: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x73
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Calling Party Number i = 0x2083, '685284832'
Plan:Unknown, Type:National
Called Party Number i = 0x81, '8050'
Plan:ISDN, Type:Unknown
Sending Complete
*Mar 22 12:53:46.382: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 64 changed to up
Router#
*Mar 22 12:53:46.415: ISDN BR1/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xF3
Channel ID i = 0x89
*Mar 22 12:53:46.439: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8 callref = 0xF3
Cause i = 0x8081 - Unallocated/unassigned number
*Mar 22 12:53:46.527: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x73
Cause i = 0x87E4 - Invalid information element contents
Router#
thanks for your help

You have to either use a transfer pattern or a translation rule.
http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_feature_guide_chapter09186a00801812db.html

SPA8000 Problem with outgoing calls from trunk

Hi all,
I have SPA8000 with the latest firmware 6.1.12.
Tried the first time to configure the trunk groups. With incoming calls it caused no problems. But with the outgoing calls cannot solve the problem:
When dialing, the SPA8000 try found number to itself.
Port 8 in trunk group 1.
10.120.0.67 - ip of SPA8000.
172.17.1.1 - ip of PBX
302 - number of trunk.
444 - other number on PBX.
INVITE sip:[email protected]:6060 SIP/2.0
Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
From: <sip:[email protected]>;tag=1e668866b76f0b0do1
To: <sip:[email protected]>
Remote-Party-ID: <sip:[email protected]:6060>;screen=yes;party=calling
Call-ID: [email protected]
CSeq: 101 INVITE
Max-Forwards: 70
Contact: <sip:[email protected]:5361>
Expires: 240
User-Agent: Linksys/SPA8000-6.1.12
Allow-Events: talk, hold, conference
Content-Length: 202
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Content-Type: application/sdp
v=0
o=- 13756 13756 IN IP4 10.120.0.67
s=-
c=IN IP4 10.120.0.67
t=0 0
m=audio 19469 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
SIP/2.0 404 Not Found
To: <sip:[email protected]>;tag=63d33124-0
From: <sip:[email protected]>;tag=1e668866b76f0b0do1
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
Server: Linksys/SPA8000-6.1.12
Allow-Events: talk, hold, conference
Content-Length: 0
What is wrong? What must I do to outgoing call?
Screenshots of configuration:

Hey!
Thank u soo much ana_bidi! It worked and my phone is back to life
I even sent an email to Nokia and I got the weirdest reply ever! They were telling me to check if my sim was inserted correctly I was like whaaaat? And I did mention to them that I can receive calls and send/recieve SMS! I seriously don't know what made them suggest that thing
Anyways thanks again for the solution!
Have a great day!
Walid Shaaya

Problem with function call from sql when using distinct

I have the following problem.
SELECT DISTINCT colA from tabA where my_function(colB) = 'TRUE'
This statement will return a handfull of results from a table with 70k + records. The function takes about 0.5 secs to execute.
How do i force the optimizer to do the select distinct first then execute the function on the results rather than execute the function for every single line first?
Thanks in advance
Keith

Let's compare some of those methods:
michaels> CREATE OR REPLACE FUNCTION my_function (tr VARCHAR2)
   RETURN VARCHAR2
AS
BEGIN
   DBMS_APPLICATION_INFO.set_client_info (SYS_CONTEXT ('userenv','client_info') + 1);
   IF LOWER (tr) LIKE '%name%'
   THEN
      RETURN 'TRUE';
   ELSE
      RETURN 'FALSE';
   END IF;
END my_function;
Function created.
michaels> CREATE TABLE taba AS SELECT object_id cola ,object_name colb FROM all_arguments
Table created.
michaels> SELECT COUNT(*) FROM taba
COUNT(*)
     78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT colA from tabA where my_function(colB) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM (SELECT ROWNUM r, t.* FROM (SELECT DISTINCT cola, colb FROM taba) t)
          WHERE my_function (colb) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
14225
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM taba WHERE (SELECT my_function (colb) FROM DUAL) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
14281
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM taba WHERE EXISTS (SELECT ROWNUM FROM dual WHERE my_function (colb) = 'TRUE')
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
13913
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> WITH temp AS
(SELECT DISTINCT colA, colB FROM tabA)
SELECT DISTINCT colA FROM temp WHERE my_function(colB) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> WITH temp AS
(SELECT colB, my_function(colB) func FROM (SELECT DISTINCT colB FROM   tabA))
SELECT DISTINCT colA FROM tabA a, temp t WHERE a.colB = t.colB AND t.func = 'TRUE'
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786 The combination with exists, rownum and dual gives the least calls to the function.

Strange problem with procedure calling from Java!!!

I am using Oracle 8.1.7 Database, Oracle 8i Application server and WInNT platform.
I am facing a strange problem while inserting a String from Java to Oracle database through Procedure. When i am passing the String containing single quotes(e.g "test' and ' and ' end") and without including any escape charactes for the single quotes I am passing the String by the setString() method then the procedure is inserting the single quotes without any problem.
Of course when I am independently executing the procedure thru backend and passing the same String containing single quotes then the error message comes as " quoted string not properly terminated" which is justified,
I have even printed the String in a file through sql on the runtime of the procedure when it is called by Java and then also the String contatins single quotes that is passed through java without any escape characters. This means that procedure is inserting the String into the column without any hassles!!!!!
Can anyone tell me what may be the reason for the peculiar behaviour of Database?
Thanks

Sri Ram wrote:
No actually in the documentation of oracle database 10g plsql user guide, oracle explains the concept of declaring nested plsql subprograms he gave the example but in the main block he gave NULL, without calling any procedure.Can you provide a link to where in the Oracle documentation you saw this example?
in order to know which procedure is getting first i added a dbms statement in both the functions and called the function from the main block.
the original example was
DECLARE
PROCEDURE proc1(number1 NUMBER); -- forward declaration
PROCEDURE proc2(number2 NUMBER) IS
BEGIN
proc1(number2); -- calls proc1
END;
PROCEDURE proc1(number1 NUMBER) IS
BEGIN
proc2 (number1); -- calls proc2
END;
BEGIN
NULL;
END;
---------------------------------------------------------------------------------------------------------The original example is equivalent to:
BEGIN
NULL;
END;That is, the main block never calls anything. Either you are misinterpreting the Oracle documentation, or if the example came from a non-Oracle source as I suspect, the author of that example has a deeply flawed understanding of how programming works.
John

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

Problem with the% deviation from Project Server 2010 field

hello
I have a problem with the% deviation from Project Server 2010 field.
Within a file or project, this project contains tasks.
Each task has completed the field% deviation.
Within the row "Summary" in the field of% deviation does not perform the sum of all fields of tasks.
Only occurs on certain projects, these projects have the view of PR Progress Report
Anyone know happens?
thank you very much

Hi
Sorry, I'll be more specific now.
Within the field% deviation. Your settings in PWA is:
The formula for field% Deviation:
Str (IIf ([Job baseline] = 0; IIf ([Working] = 0, 0, 100); IIf ([Working] = 0; -100; Int (100 * ([Job] - [Work Online base]) / [Working baseline])))) + "%"
Under the heading rows Calculation Summary:
> Use formula.
Within the field Allocation Calculation of rows:
> It is labeled the "Apply unless you manually specify".
The field [Job] and field [Job baseline] are fields Pack project server.
The error is in project, in the list of tasks.
In the top row, this row summary makes the sum of the ranks of the tasks of the file.
But in my case only in the summary field the same value appears in the tasks.
In all the cells in column% deviation appears the same value.
I hope it helps.
thank you very much

Problem with 5800, call processing is too slow.

i have a problem with rejecting calls and recieving as well as dialling. it takes to much time to process. when a caller calls me they hear the dial tone for about 5 seconds then i get the call on my phone.. when i use third party software for automatic rejecting calls, the caller hears the dialtone for like 10 seconds or more then it gets rejected which is really annoying. please help me. is there a solution for this? this is not the network problem coz my sim n rejecting calls on other phones work fine. AND ALSO wen someone calls me i get the call alert like after 10 seconds, its very slow!!

Make sure you have upgraded to 1.1.1 which fixes volume problems.
Note that it will NEVER be as loud as standard cell phones but it should improve the volume so you have no problem hearing it in the car.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem with controlling Annotations from Excel VBA

Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End Sub

Make sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problem with f95 called from make inference rule

Similar Messages

Maybe you are looking for