Problem with guitar and backing track

Hi, i link my guitar with the jack cable, but when i go to play i don't hear the sound of my guitar and i don't hear the sound of the backing track too. Why? Somebody can help me?

You'll have to give us more details! Like:
- What is "the jack cable"?
- How are you recording?
- Are you recording to a guitar track or a real instrument track?

Similar Messages

Problems with Next and Back Buttons ActionScript 3.0

Hi,
I have set up a Back, Play and Next buttons in a slideshow I am making. The next and back buttons work correctly until it gets to the end.
If I press the Next button it goes back to what appears to be Frame 1 and will not go to the next slide. If I press the Back button it will then go to Frame 201 and If I press next again it will go to Frame 1. It will only go back and forth in between those frames.
If I press the Back button from the beginning it goes through the slide show correctly then it gets stuck at Frame 1. If I press next button it goes to Frame 121 and gets stuck in between 121 and 1.
I can't figure this out please help.
My code on Frame 1 is:
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent) { gotoAndPlay(2); }
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
gotoAndStop(40);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
gotoAndStop(281);
My code on Frame 40 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
gotoAndStop(121);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
My code on Frame 121 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
gotoAndStop(201);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
gotoAndStop(40);
My code on Frame 201 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
gotoAndStop(281);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
gotoAndStop(121);
My code on Frame 281 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
gotoAndStop(1);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
gotoAndStop(201);

I found the solution! Flash CS5 Tutorial 6 Click On Button Go To Another Frame.avi - YouTube
I had to Convert to Keyframes each frames I wanted to jump to on the buttons layer. Then highlight the button and give each another instance name! Like forward1_btn, forward2_btn, back1_btn, back2_btn... I did that and adjusted the action-script for each button.
Frame 1
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent)
gotoAndPlay(2);
forward1_btn.addEventListener(MouseEvent.CLICK, Shoot_1);
function Shoot_1(event:MouseEvent):void
gotoAndStop(40);
back1_btn.addEventListener(MouseEvent.CLICK, Back_1);
function Back_1(event:MouseEvent):void
gotoAndStop(281);
Frame 40
forward2_btn.addEventListener(MouseEvent.CLICK, Shoot_2);
function Shoot_2(event:MouseEvent):void
gotoAndStop(121);
back5_btn.addEventListener(MouseEvent.CLICK, Back_5);
function Back_5(event:MouseEvent):void
gotoAndStop(1);
And so on...

Problem with guitar and sculpture.

I´ve tried to sidechain my guitar throgh sculpture, but I dno´t get any sound then my normal guitar sound. Help please.

This topic comes up fairly frequently, and is most often a misunderstanding or lack of knowledge about what it is you are trying to achieve.
Sending a sidechain signal into Sculture means that you can use the audio signal as a modulator in the synth - mostly to excite the string according to your audio souce.
It doesn't turn Sculture into a guitar-synth, for example.
To do this, you should set the output of the guitar track to "No Output", so it can't be heard through the mixer (do not simply mute the channel).
Now on the audio instrument that Sculture is on, select your guitar audio track as the sidechain signal, and select the external/sidechain input in one of the string modulators - you'll need to play with the exciter strength. Now as you play Sculture with MIDI notes, the guitar audio will be affecting Sculpture's string.

Problem with iTunes and MP3s - tracks have low volume in itunes only

Hi all
I have several mp3 that play just fine on other mp3 players (liSt below) that when I play them via iTunes are so quiet, I can barely hear them at full volume. the tracks are all mp3gaiN album leveled. I've looked at the tracks and they are all around 90db.
uniT these tracks play fine iN iNclude: the sony mp3 player iN the car, WMP11, wiNamp, my Sansa player, my RCA player,
Any iDeas?
Ive tried re-encoding down, to a lower mp3 level with out success.

I did try adjust the sound enhancer originally (should have noted that). It helped with some of the notes, did not fix. Where is the equalizer in 10.6?

All kinds of problems with syncing and backing up

Can anyone help?
My iPad gets only so far through the sync process before I get a window telling me my iPad has disconnected or that the disc cannot be found. The only way I can get it to sync is to reset it and sync from scratch, which means re-downloading all my apps.
Also, before anyone says it, I've tried just backing up the iPad but it won't do that either. I keep getting told the iPad disconnected before it's finished and ends up not copying anything
Hope someone out there has a suggestion
Cheers
Pete

Hi Ian
I checked the USB and it all looks alright. I tried syncing again and got told:
"An error occured while reading from this device"
which is the normal one i get.

How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

GarageBand on your Mac or on an iPad?
If you are asking abot GB on a Mac you do the following:
Create a new GarageBand project with a Guitar track
Insert the CD and drag the audio file of the Lesson track or backing track to an empty region below the tracks in the timeline of the GarageBand window.
Plug in a set of head phones and put them on to listen to your backing track.
Plug in your guitar and select the guitar track.
Click on the measure where you want to start your recording and select the guitar track.
Press "record" and start to play.
Regards
Léonie

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

[SOLVED] Problem with netctl and dhcpcd

Hi everybody,
I had a problem with netctl and dhcpcd.
I was using netctl and wifi-menu to connect to wirelless networks with dhcp.
It worked fine at home, then i went to a friend where it also worked but then i went back home and it failed at every try with those error messages:
dhcpcd[2718]: version 6.0.5 starting
dhcpcd[2718]: wlp9s0: rebinding lease of 192.168.1.154
dhcpcd[2718]: wlp9s0: reject NAK via 192.168.178.1
dhcpcd[2718]: wlp9s0: soliciting a DHCP lease
dhcpcd[2718]: wlp9s0: offered 192.168.178.44 from 192.168.178.1
dhcpcd[2718]: timed out
network[2659]: DHCP IP lease attempt failed on interface 'wlp9s0'
systemd[1]: netctl@wlp9s0\xxx.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Automatically generated profile by wifi-menu.
systemd[1]: Unit [email protected] entered failed state.
I figured that dhcpcd tried to rebind an ip that my router rejected and didn't accept the ip that it offered instead.
The solution was to delete:
/var/lib/dhcpcd/dhcpcd-wlp9s0.lease
now how can i configure netctl and or dhcpcd so that won't happen again and that it accepts all ips offered by routers?
Last edited by Samy (2013-09-04 13:32:13)

I've had this happen now and again. You can rebind the lease yourself with:
$ dhcpcd --rebind
You could also try increasing the timeout by adding
TimeoutDHCP=
to your netctl profile/s - see netctl.profile(5) as WonderWoofy suggests. Although I haven't tried the latter.
Last edited by youngdm (2013-09-01 22:01:05)

Problem with safari and wallpaper etc

I have a problem with safari and dashboard wallpaper... After rebot i loose history and topsites from safari. My deskboard wallpaper swiched back to this http://fc08.deviantart.net/fs28/f/2008/097/f/8/MacbookPro_Wallpaper_by_desingsblp.jpg
Whats is wrong with my mac?

HI and welcome...
Remove that particular desktop wallpaper. That's probably what's causing your to lose History and TopSites.
Open a Finder window. Now open the Library folder then the Safari folder. See if that wallpaper is hiding in the Safari folder. Mine does that also. If it's there, move it to the Trash but don't empty the Trash.
Quit Safari (Command + Q) Now relaunch Safari. If History and TopSites are ok, then empty the Trash. It's that image causing the problem.
Carolyn

Problem with guitar and backing track

Similar Messages

Maybe you are looking for