Problem with i-Planet and change mouse cursor

Hello, I know how change mouse cursor using Toolkit.getdefaultToolkit().createCustomCursor(Imagen,new Point(0,0),String) and setCursor. It works in a local applet but it doesn`t in my aplication. This aplication attach a i-Planet web server and displays the following error:
java.lang.NoSuchMethodError: java/awt/Toolkit: method createCustomCursor(Ljava/awt/Image;Ljava/awt/Point;Ljava/lang/String;)Ljava/awt/Cursor; not found
Where's the problem? Maybe an incorrect jdk version. I don�t think so because I use 1.3.1 version and this method works since 1.2 version.
Thank you for all.

hi,
iplanet has its own jar files in \Netscape\Server4\bin\https which contains the same jar files as it is in jdk dir...so importing ur jar files thru the environment might create a similar problem

Similar Messages

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Problem with wireless keyboard and wireless mouse

All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

Changing Mouse Cursor with a Thread

Hi all
I am trying to change mouse cursor inside a thread for a graphical program so that the GUI does not freeze while new image is calculated and shown on the main frame. I have the below code. It works altough not the way it should. Forexample, when I press accelarator keys to show an image (ctrl+D) I see strange characeters on the frame and they disappear when the image is shown. Also I use scroll pane to show the images but when I use this thread it does not display scroll bars when the image does not fit into the viewing area (a panel). If I don't use this thread scroll bars apeear as they should. I could not find what is causing these strange behaviours. Also after image calculaed and shown on the screen, the thread should be terminated, right? But how? I could not find exact info on this. Any ideas on these? Thanks.
pp = new PixelPanel();
jsp.setViewportView(pp);
pp.addMouseMotionListener(this);
setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
thread1 = null;
thread1 = new Thread("thread1")
public synchronized void run()
try
pp.showGrayImage();
finally
setCursor(Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
thread1.start();

I am trying to change mouse cursor inside a thread
for a graphical program so that the GUI does not
freeze while new image is calculated and shown on the
main frame.What does the mouse cursor have to do with your lack of multithreading and you doing all the work in the AWT thread?
I have the below code. It works altough
not the way it should. Forexample, when I press
accelarator keys to show an image (ctrl+D) I see
strange characeters on the frame and they disappear
when the image is shown.Probably because it can't repaint because you're hogging it with painting work.
Also I use scroll pane to
show the images but when I use this thread it does
not display scroll bars when the image does not fit
into the viewing area (a panel). If I don't use this
thread scroll bars apeear as they should. I could not
find what is causing these strange behaviours.Probably because it can't repaint because you're hogging it with painting work.
Also
after image calculaed and shown on the screen, the
thread should be terminated, right? But how? I could
not find exact info on this. Any ideas on these?A thread executes its run method and just stops when it's done.

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

Problem with my laptop colour changing and some time moniter screen black out

i have a problem with my laptop screen some time its working ok but some time its going to changing and blinking colours and screen shows black out and not respend for 10 minutes or more.i want a solution for this.

Hi @hpsah
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a problem with your laptop screen changing and blinking through colours. I will be happy to help find a solution for this but you didn't give me information to work with. For future posts I suggest checking out Want Good Answers? Ask Good Questions. I will need to know what operating system you are using? What is the product number of the notebook? Does this issue happen if you connect an external monitor?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

Problems with track pad and osx installation disc on macbok.

Okay so I am having two separate problems with my macbook.
First, the track pad, or the button beneath it, is pretty much completely out of commission. When I try and use it, the computer acts as if I am holding down the button all the time. Example, when I drag it across the desktop, the "click-and-drag" square starts appearing next to the cursor or when move the cursor on an icon, it tries to click and drag that. The only way that I can fix it thus far is to hook up my wireless mouse. Hoping someone else has a better solution so that I can continue to use the notebook on the go without having to bring the mouse. Note: the button does not appear to be depressed in anyway.
Second problem is happening when I attempt to reboot the computer with the OS X Leopard disk in for a re-installation. When the gray start-up screen appears, before the gray apple comes on the middle of the screen, a folder icon with a question mark on it appears for a split second and then turns into the normal apple icon after which my OSX disk is spit out of the drive and the computer boots straight to the desktop. I have attempted holding down the control button, the option button, and starting the process while the computer is still turned on and then just restarting it, the disc is ejected upon restart every time. I have reinstalled the OS with this disk once before and it has worked fine and other disks seem to be working fine in the drive, so I am at a lost here.
I know that was a lot of info but if anyone out there can help me out with either one of these problems it would be much appreciated.
Thanks.

exactly the same issu with the track pad here.
I v tried to use it without the battery but the problem persist.
If I use an USB mouse i can move it arnd but wen I click or double click nothing happen...so is useless.Same problem with the Blur Tooth wireless mouse.
The issue appear several months ago...after a couple of weeks went away, and now is back again. I try the routine manteinance but nothing solved the issue.
Any suggestion? I have some urgent work to do ...I will try tomorrow to bring it in an apple store but I can't leave it with them ..
Thanx in advance

Browser compatibility problem with t:selectOneMenu and JavaScript calendar

I'm having problem with <t:selectOneMenu> and JavaScript calendar on IE. It works fine on Firefox but doesn't work on IE.
The JSF code is as follows:
<tr>
                                   <td align="right">
                                        Archive Date
                                   </td>
                                   <td align="left" colspan="3">
                                   <table cellpadding="0" cellspacing="0" border="0">
                                   <tr>
                                   <td>
                                   <span class="tuny_text">After (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateAfter" value="Archive Date After" rendered="false"/>
                                        <br/>
                                        <t:inputText required="false" value="#{nonItemImageSearchPage.stringArchiveDateAfter}" name="txtArchiveDateAfter" id="txtArchiveDateAfter" forceId="true" styleClass="inp" style="width: 128px">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateAfter" name="dtpArchiveDateAfter" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateAfter" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   <td>
                                   <span class="tuny_text">Before (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateBefore" value="Archive Date Before" rendered="false"/>
                                        <br/>
                                        <t:inputText value="#{nonItemImageSearchPage.stringArchiveDateBefore}" name="txtArchiveDateBefore" id="txtArchiveDateBefore" forceId="true" style="width:128px" styleClass="inp">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateBefore" name="dtpArchiveDateBefore" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateBefore" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   </tr>
                                   </table>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpBackground" value="Background"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpBackground" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.backgroundId}" styleClass="inp" style="width: 150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                        <s:selectItems value="#{nonItemImageSearchPage.backgroundPrefsList}"
                                                  var="backgroundPrefs" itemValue="#{backgroundPrefs.id}" itemLabel="#{backgroundPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpTheme" value="Theme"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpTheme" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.themeId}" styleClass="inp WCHhider" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.themePrefsList}"
                                                  var="themePrefs" itemValue="#{themePrefs.id}" itemLabel="#{themePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpSeason" value="Season"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpSeason" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.seasonId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.seasonPrefsList}"
                                                  var="seasonPrefs" itemValue="#{seasonPrefs.id}" itemLabel="#{seasonPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpClothing" value="Clothing"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpClothing" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.clothingId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.clothingPrefsList}"
                                                  var="clothingPrefs" itemValue="#{clothingPrefs.id}" itemLabel="#{clothingPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpToy" value="Toy"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpToy" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.toyId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.toyPrefsList}"
                                                  var="toyPrefs" itemValue="#{toyPrefs.id}" itemLabel="#{toyPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpJuvenile" value="Juvenile"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpJuvenile" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.juvenileId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.juvenilePrefsList}"
                                                  var="juvenilePrefs" itemValue="#{juvenilePrefs.id}" itemLabel="#{juvenilePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right">
                                        <h:outputLabel for="drpGroup" value="Grouping"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpGroup" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.modelGroupingId}" styleClass="inp" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.groupPrefsList}"
                                                  var="groupPrefs" itemValue="#{groupPrefs.id}" itemLabel="#{groupPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td class="left_separator"> </td>
                                   <td> </td>
                              </tr>
The JavaScript code is as follows:
<script type="text/javascript" language="javascript">
     var dtpArchiveDateBefore = new MooCal("txtArchiveDateBefore");
     var dtpArchiveDateAfter = new MooCal("txtArchiveDateAfter");
     window.addEvent("domready", function(){
     $("dtpArchiveDateBefore").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
     /*$("txtArchiveDateBefore").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
    $("dtpArchiveDateAfter").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
   /* $("txtArchiveDateAfter").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
     </script>When the calendar is above t:selectOneMenu, it doesn't show up on t:selectOneMenu area. Could anyone help me solve the issue?
Thanks
Rashed

There are dozens of CSS attributes that can (and have to) be handwritten. Trouble with them is that, like text shadows, they don't appear in all browsers. I have nine different browsers installed and test pages in ALL of them before I "finish" building site or page for a template.
I try to build for Firefox, out of personal preference for it, but I have to do things that work with IE because it still holds the market share (46%IE to 42%FF), and I will only go with designs that work in IE, FF, NS, Opera, Safari, and Chrome.
As to your questions.
1. The compatibility check is most likely current with the time of the build. I don't know if that component updates as browsers do, but I'd tend to think it doesn't. I'm using CS4 and there haven't been any updates for it in nearly a year. Firefox has released 4.0, Opera released 11, and Safari released 5 since then. The updater would have found and downloaded something if it was available.
2. I could only guess. Text shadows DON'T show up in design view (or in IE) but they do in browser preview. It's just a UI quirk, and it means "trial and error" is the onyl way to get what you want.
3. The quick-selects which are in DW dropdowns or popouts are the ones most common to CSS designs and have been proven to work with all browsers at the time of release of your particular build of DW.
Hope that helps..

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Problems with captivate 8 and windows 8

I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problem with i-Planet and change mouse cursor

Similar Messages

Maybe you are looking for