Problem with iWeb 1.1 photos solved... for me, at least

After updating, some of my photo pages were broken. Slideshow wouldn't work and clicking on a photo would not open a larger version. Some pages, however, did work. After hours of trying to figure this all out, I finally narrowed the problem down. If the page had an apostrophe in the title, it was broken (e.g.:Tyler's Party). If it did not, it worked. These titles worked in the earlier version. Simply deleting one punctuation mark magically made the pages work again. If you are having this problem check this or other punctuation in the titles.

I had the exact same problem and as others have suggested, the apostrophe in the page name could be the culprit of the problem. For me, that was the problem. I had a page named "Dog's day at the beach" and that worked just fine in iWeb 1.0.1. Now with iWeb 1.1, I had to rename is "Dog day at the beach" which luckily has a similar meaning given the context of my photos and when I took it.
A bit bizarre how such a simple apostrophe could escape Apple's iWeb engineers.
I hope this will be fixed in a soon-to-come update.

Similar Messages

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

Problems with iWeb, after installing Lion

Hi,
Ever since I installed Lion, I have been having problems with iWeb. Any changes I make in iWeb, and then publish to my site, via mobileme, are not saved, and the site reverts to the orignial site, after closing the website, and iWeb also loses the cahnges. I am unable to sue the Publish Site button, and the option for Publish Site changes is not available.
I am using iLife 11.
These problems have only occurred since I installed Lion.
Any help greatly appreciated.
Nozza

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas Dijokas

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

Problem with iWeb publishing to IE

Hello, I am experiencing a problem with iWeb '08 publishing content to Internet Explorer. The images and web pages look fine in Safari and in Firefox, but a lot of the web page images are mirrored in IE, covering up large parts of the text. Please don't tell me I have to spend $79.00 on upgrading to iLife '09. I just upgraded my iWorks to '09, but would upgrading to '09 in this instance even be the answer? Please advise. I fear that I will alienating any of my IE web surfers. Any help and advice would be greatly appreciated. Thank you.

Hello and welcome to the board.
IE is a terrible browser to render pages made with IWeb (I'm not sure upgrading to ILife 09 will fix your problem).
I decided to somewhat "alienate" my IE visitor by putting a message on my home page that recommend them to use a compatible browser. Check my page (using IE here: http://www.wesdotphotography.com/Home.html) and look at the message. Also if you use any other browser you will not see my message and will experience a better browsing. It is not the fault of IWeb but more like Microsoft not writing a proper browser. a lot of people will confirm my say.
Search this forum and you will see a lot of complaints about IE.
Good luck
Thierry
PS: post you website so we can take a look.
+Disclaimer: I may receive compensation via Google ads if you visit my website.+

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Iphoto 5 : problems with exportation high quality photos with music

as I want to export some photos in an acceptable quality with music, I found the only possibility was by exportation them as quicktime file (xx.mov).
There you can choose the resolution of your photos.
By doing this there exists a button "momentan ausgewählte musik zum film hinzufügen" which even after many trials did not work.
even apple support couldn`t solve the problem.
Does anyone have an idea how it would work?
PS: I tried also other ways by using exportation as diashow in iphoto , or by using idvd - in both ways music is exported but photos are visible only in very low quality.
regards zacambo

Hi Léonie, All the sw is at latest update. The library was simply copied from the old machine to the new machine. When I launched the new version of iPhoto (on the new machine) I pointed it to the copied iPhoto library and it picked it up without any issue. The first time I opened it, iPhoto spent some time migrating the data format from the old iPhoto version to the new, but that was done only once. I am not sharing the library between the old iPhoto and new; now the migrated library is for the exclusive use of the new iPhoto.
Regarding error messages in syslog, it's quite funny, I do see them, and they reflect the fact that iPhoto has gone off to la-la land for extended periods of time, ignoring all user input (this is what results in the spinning disc in Mac OS):
1/28/14 9:16:18.792 PM WindowServer[127]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
1/28/14 9:16:20.926 PM WindowServer[127]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 3.13 seconds (server forcibly re-enabled them after 1.00 seconds)
So that was a common 3 second "hang" of iPhoto. Nothing apart from those kinds of messages.
Thanks for the links to iStat... i do in fact have the latest version of it and don't have that problem with Mavericks.

Problems with iWeb displays on Firefox and IE

My iWeb pages look fine on Safari but not on Firefox or IE - both those sites show graphics overlapping text, extra spaces between text, missing boxes etc. My site is theFOWL.org - it's a site for a non-profit library organization. It used to work fine on Firefox and IE but not now. Thanks for any help

Your site looks OK to me in Firefox. This browser does have a problem with image effects such as drop shadows and there are a few ways to overcome this...
http://www.iwebformusicians.com/Website-Photos/Preview.html
http://www.iwebformusicians.com/Website-Photos/Effects-Picturesque-Webify.html
http://www.iwebformusicians.com/Website-Photos/Stroke-Shadow-Reflection.html
The main thing with IE is to make sure that none of the text boxes and objects are touching or overlapping by doing a Command A on the iWeb page.
Other tips aboutb IE...
http://www.iwebformusicians.com/iWeb/iWeb-Internet-Explorer.html
and how to make your website more compatible and load faster...
http://www.iwebformusicians.com/iWeb/Browser-Compatibility.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Problems with applications: GPS Info QT - IM for N...

Problems with GPS Info QT: new update v1.25 (cancelled by Nokia recently) has a gap with the coordinates in longitude because the error is 1 degree 56 minutes more or less (big problem). But it is an excellent applications: when can we obtain it again?
Problems with IM for Nokia: it has been impossible to install the updade of this application. I have installed it several times and uninstall again, but I always see the word "error".
What happens with the Ovi Maps? before I could see the satellite maps in old version (like a google earth) but when Nokia updated to version 00.02.43.117 I cannot see it. (Maybe it had errors with the Nokia Maps.
Solved!
Go to Solution.

ilema wrote:
What happens with the Ovi Maps? before I could see the satellite maps in old version (like a google earth) but when Nokia updated to version 00.02.43.117 I cannot see it. (Maybe it had errors with the Nokia Maps.
Only for larger conurbations however:
Happy to have helped forum with a Support Ratio = 42.5

Strange problem with RDP and mouse, only solved after minimize/maximize

Good day,
We have this very annoying problem with a RDP Terminal Server. It is Windows Server 2008 R2 SP1.
This server has the Session Host role installed, with local RDP user licenses.
We only have this issue when running a certain application.
This application is called Rockwell FactoryTalk View and this in an application to display industrial processes.
It will take the Full Screen in a fixed resolution and will display buttons, objects, values... The application also uses Internet Explorer cache so I think it uses ActiveX, Flash or Java, I don't know.
What sometimes happens is this:
- The mouse point is able to move in the entire screen (good)
- The mouse button will only work in 1 certain area of the screen (which is a small rectangle)
- The mouse "hovering" above objects will also only highlight items that are in this rectangle
- The keyboard remains functional and with alt-tab other objects or other applications can get focus, but still no mouse clicking
The problem can be solved by:
- Minimizing the RDP window and maximizing it again
- Or: Sending a message to the session using task manager, after clicking "OK" on that message the problem is gone
Normally, about 5 users will have this application opened in their session, the "crash" is only effecting 1 session.
The problem seems to happen randomly and we don't know if we should point to the FactoryTalk application, or to Terminal Services/RDP. The end users have no rights to minimize/maximize, this is not the solution.
Is it possible to have any input on this please?
Thank you.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check with the application support team whether the application is fully supported by Windows Server 2008 R2 in remote session. In addition, suggest you to update the client RDP version to RDP 8.1 and check the result for better feature and functionality.
Apart from this, there is Hotfix for the issue. Please download, install and check the result.
Cause:
The issue occurs because the remote desktop ActiveX object does not deactivate the focus of the remote desktop session when the focus is lost. Because the focus is still activated, the remote desktop ActiveX object cannot set the focus of the remote desktop
session again when you change the focus back to the session.
A remote desktop session does not respond to keyboard input or mouse input after it loses the focus in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2579381
Hope it helps!
Thanks.
Dharmesh Solanki

Problem with iWeb 1.1 photos solved... for me, at least

Similar Messages

Maybe you are looking for