PROBLEM WITH LANDLINE PHONE CALLS TO FRANCE

Hi, We do have a subscription for unlimited world, but we are getting problems to make phone calls to landline numbers in France, most of the phone numbers starting by +339 do not work. The calls do not even enter. Please let me know what can be the problem. Regards

tintamundo wrote:
Hi, We do have a subscription for unlimited world, but we are getting problems to make phone calls to landline numbers in France, most of the phone numbers starting by +339 do not work. The calls do not even enter. Please let me know what can be the problem. Regards The +33 9 numbers are not traditional landline numbers.  These are VOIP numbers.  http://en.wikipedia.org/wiki/+33 Traditional landline numbers in France would start with +33 1, +33 2, +33 3, +33 4, or +33 5.  Mobiles start with +33 6 and +33 7.  The  +33 8 numbers are either Freephone or shared-cost numbers.  I didn't see anything in the Skype prices covering calls to VOIP numbers or to the numbers starting with 9.  You may want to contact Skype Customer Support and provide them the number you are trying to reach in France, and see if there is something they can do to help you.   

Similar Messages

  • BB Pearl Flip 8230 problem with recieving phone calls

    I don't know if anyone has experienced this problem with their BB Pearl Flip 8230. My problem is, when ever someone calls my 8230 and I answer the call the person making the call gets a very loud squeel as soon as I answer. It happens when I use flip open answer, when I manualy answer. I've turned down the volume and it still does the same thing. I've pulled the battery out while phone was still turned on to do hard reset still no change.
    Blackberry 8230 smartphone (CDMA) v4.6.1.182 (Platform 3.3.0.64)
    Hopefuly someone has an idea of whats going on, it would be nice to get it figured out.
    Thanks for now
    Cheers 

    My gf and I are have the exact same problem.  It doesnt happen all the time, but  it does happen frequently.   Did you figure out what the problem was?
    we both have the 8230 v.4.6.1.182
    Message Edited by muntman on 05-13-2009 12:50 PM

  • HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

    I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
    Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

    Wow. Lots of help. Thanks apple

  • There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

    There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number.  Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction  there is a tones problems in the system.  And this Will cause undirect problem for the iPhone 6

    There is no apple here in this user to user technical forum.
    Do this Use iTunes to restore your iOS device to factory settings

  • Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

    Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

    Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support

  • Has anyone else had any problems with their phone over heating and shutting down?

    I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few  times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

    Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

  • I have a problem with the phone speaker

    I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

    If you have a docking station try putting it on there.  I lost my sounds, docked it and they came back immediately.

  • Hi guys, i just got my iPhone 4s and sometimes the signal is lost and i have to restart the phone in order to get reception again. do you thing there is a problem with the phone or with the carrier? thanks

    Hi guys, i just got my iPhone 4s and sometimes the signal is lost and i have to restart the phone in order to get reception again. do you thing there is a problem with the phone or with the carrier? thanks

    I have the exact same problem. Called my operator who told me it was a hardware issue and Apple is working on a fix...

  • Problems with texting and calling

    Hi!
    I have a problem with my phone, I just got it 2:nd hand so I do not know if it worked properly earlier.
    I can't call anyone, the phone just disconnects and says "beep beep beep".
    People calling me goes straight to voicemail.
    I can not send or receive test messages unless it is iMessage.
    3G data traffic works properly though, any thoughts? I have restored the entire phone 2 times and the network settings 2 times and it is still the same problem. When I tried to use the SIM-card on my old phone (android) it works as espected.

    Your second-hand phone may have been hacked or jailbroken before you got it. Ask the person you bought it from.

  • Problems with iPhone phone side

    If this subject is in here already, I missed it in my search.
    I've had my iPhone since Nov of 2007 and haven't had any problems with the phone side of it, until now. I've updated to 3.0.1, if I'm able to make/receive a call it's of very poor quality and usualy so bad I can't understand the person on the other end. If I haven't manually disconnected in frustration the phone will drop the call anyway.
    The nearest Apple store is 3 hours away but from what I've been reading in here, the "Experts" don't know anything about v1.0 iPhones anyway so what would be the point of going. I have no need to upgrade to a 3G because I won't even use it for half of whats capable of. Heck, the v1.0 is more handheld than I need but up until now it has been the best phone I've ever had.
    Is this an issue of the hardware being too old to play nice with the newer software or is this an ATT issue of using EDGE on a 3G network?

    There is no issue with the older iPhones and the new OS (I have older original iPhone) running the latest OS (as so some of my friends, all with no issue).
    Also, you are not using Edge on a 3G network, you are using Edge on Edge (they are different, the towers that had Edge get upgraded to add 3G or new towers are put in place with 3G and no Edge, yada, it isn't like Edge is replaced by 3G, they live separate lives)

  • Problems with IP Phones registration to CUCME on SG200-50P

    Problems with IP Phones registration to CUCME on SG200-50P
    System setup:
    - Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
       with HWIC-4ESW
    - Switches:
       - old - SLM224P
       - new - SG200-50P (SLM2048PT), OS v1.3.2.02
    - IP Phones 7911 and 7931, OS v8.4.2
    One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
    Network diagram:
    C2811---HWIC-4ESW---SWITCH---IPPhones
    Problem description:
    1. In the old setup with SLM224P everything works fine.
       Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
    2. When switch is changed to new SG200-50G:
       - ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
       - ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
       - after reconnecting the old SLM224P situation backs to normal
    Things that have been checked or tried without success:
    - ports speed and duplex auto, correct detection - although not tested with manual settings
    - CDP/LLDP on/off
    - smartport mode auto and most static settings, also with disabled smartport
    - power cycle / reset
    - spanning tree and port security settings
    - solutions from that post - https://supportforums.cisco.com/thread/2232161
    None of the above methods worked.
    The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
    After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
    Please advice.
    Thanks in advance.

    1 - You have created the voice vlan?
    Nope, flat network, one ip subnet (10 hosts and 10 phones)
    2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
    Yep, phones are connected to untagged access ports of the one and only vlan
    3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
    Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
    We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
    The switch was pretty much in default out-of-the-box config (beside management parameters).
    4 - When rebooting the switch, you did ensure to save the start up to running config?
    Yes, running to startup
    5 - Have you manually set spanning tree PORT FAST for the phone ports?
    No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles.

  • My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

    My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store.  What does that mean please?

    Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

  • Hi every time I go to write a tx on my iPhone it asks for my apple I'd sign in like when I buy an app or something and you have to enter your password is there a way to stop it doing this or is there some kind of problem with the phone

    Hi every time I go to write a tx my phone asked for my sign in details like I have just bought something like an app of song ect I just press cancel and it goes away but still pretty annoying is there a way to stop this or is there a problem with the phone  ? Thanks

    If the login box keeps popping up either your acct is disabled or you are mistyping your pw.  
    Go here and try out your pw and reset if necessary:
    http://appleid.apple.com/
    Click on Manage ID and go from there.

  • What,s the reason to stop iphone 5?? Is there any problem with that phone?? Because still 4s is in market but iphone 5 is stopped.... What,s wrong with apple??

    Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????

    It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.

  • Having problem with siri on calling someone

    Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number "
    Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same!
    whats wrong with that?

    i"m from Mauritius also having the same problem when calling someone using siri.
    i think its because, of the 8 digits number.

Maybe you are looking for

  • Rebate with also free goods and depending on a volume

    Hi my company wants to use the rebates but some customers prefer goods instead of cash and my company wants to decide at the begining of the year the limit from which the customers are subject to rappel 1)     What happens if some of my customers ins

  • Any way to get Open Type features to work in Pages 5?

    It seems that the Open Type support, which already has been very wonky to say the least and felt more like a hack in Pages 09 has been completely broken now in Pages 5. It used to be possible to use the system wide typography menu (CMD+T > Gear Icon

  • Libicuin.dll & error 7 (windows error 126)

    Whilst updating itunes my desk top froze, so i downpowered. After starting up again, i tried to go back on itunes again, to which i got "this application has failed to start because libicuin.dll was not found. re-installing the application may fix th

  • How to convert workflow template number into transation code?

    Hi Experts, We are using WS20000081 Leave request workflow in SAP 4.7.I created one customized workflow according to the client requirement.How can i convert WS99900009 into Transaction? I created one absence type with workflow template WS99900009.Wh

  • Carrier sign still showing after wiping and reloading OS?

    Hello dear users, In my thread of "application installation issues", it seems to be determined that my carrier who I got the phone from, is blocking the install of applications as I get a 910 error, application authorization failure, when i try to in