Problem with linking to reports in Web Intelligence XiR2

Hi,
I'm having trouble doing even a basic (direct) link to a sub report or a report.
These are my tries:
(webserver name)
http://corpwebapps:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?&sDocName=KPI_Dashboard_Legenda&sWindow=Same&sType=wid&sRefresh=Y
(server name)
http://SRV0010:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?&sDocName=KPI_Dashboard_Legenda&sWindow=Same&sType=wid&sRefresh=Y
I've tried getting the properties of the report from infoview, to get an idea of the directname; That would be:
Webi/webi_view.aspx?id=38868&windowProperty=fullscreen=yes,location=no,scrollbars=yes,menubars=no,toolbars=no,resizable=yes",38868,true,"iv","fullscreen=yes,location=no,scrollbars=yes,menubars=no,toolbars=no,resizable=yes","");
What am I doing wrong?
The admin assures me that the application is at port 8080;
Thanks for your help!

Basicly a 'Page cannot be displayed' error.
When I remove the port I get
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly.
If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted.
Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
When I keep the port I get an error in Dutch, which most likely is the langeuage used on the server.
The notice is also slightly different; It sais that I should check for connection problems there (in a little red box).

Similar Messages

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Steps to link a report to Web Application Form. Post Your Opinion

Hi friends,
After going through it what is your opinion. please do post your opinion.
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx.vb file, it is as follows:
Private Sub ConfigureCrystalReports()
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
myCrystalReportViewer.RefreshReport()
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
myCrystalReportViewer.Visible = True
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
For Each mySection As Section In mySections
Dim myReportObjects As ReportObjects = mySection.ReportObjects
For Each myReportObject As ReportObject In myReportObjects
If myReportObject.Kind = ReportObjectKind.SubreportObject Then
Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
SetDBLogonForReport(myConnectionInfo, subReportDocument)
If myReportObject.Name = "Subreport1" Then
Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
If Not lvSec Is Nothing Then
Dim t1 As TextObject
t1 = lvSec.ReportObjects("txtEmpName")
t1.Text = Session.Contents("EmpName")
Dim t2 As TextObject
t2 = lvSec.ReportObjects("txtRepID")
t2.Text = Request.QueryString("REPID")
End If
End If
End If
Next
Next
End Sub
Please do help me out as the data of report is not getting displayed on the report.
After going through it what is your opinion. please do post your opinion.
While creating the Report has the following Report Options on / checked.
1. Database Server is Case-Incensitive
2. Use Indexes Or Server For Speed
3. Verify on First Refresh
4. Show Preview Panel
5. Display Alerts on Refresh
6. Select Distinct Data for Browsing
Do I have check or uncheck any other option?
Thanks and regards
Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PM

Sir AG,
Thanks a lot for replying and spending your valuable time for my problem.
Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
So as per the code I have attached, I have this
Option Explicit On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Next for ReportDocument Object:
Dim fileName As String = "Reports\" & ReportID & ".rpt"
        Dim reportPath As String = Server.MapPath(fileName)
        myRepDoc = New ReportDocument()
        myRepDoc.Load(reportPath)
        myCrystalReportViewer.ReportSource = myRepDoc
Above is the code used by me in Page_Init and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
Lastly:
The database connectivity code:
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        If Session("reportConnectionInfo") IsNot Nothing Then
            Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
            myConnectionInfo.ServerName = ConnInforArrList(0)
            myConnectionInfo.DatabaseName = ConnInforArrList(1)
            myConnectionInfo.UserID = ConnInforArrList(2)
            myConnectionInfo.Password = ConnInforArrList(3)
        Else
            lblMessage.ForeColor = Drawing.Color.Red
            lblMessage.Text = "Session is off. Please Relogin to See the Report."
        End If
        SetDBLogonForReport(myConnectionInfo, myRepDoc)
        SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
SetDBLogonForReport(myConnectionInfo, myRepDoc)
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
    End Sub
This code I have got from a sample of the forum itself.
Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
Thanks and regards
Mushtaque

Problem with links on email templates

Problem with links on email templates
Hi,
We have been having issues with links on our email templates. Some of the links point to the following URL:
http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
Sometimes we get “Unknown internal error” on the web page.
Can anyone help or advise on how to resolve this issue?
Many thanks,
Wesley.

Hi Wesley,
This is rather late, but we've seen the same thing frequently (and I believe can replicate it). It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
Upon copying, the link gets scrambled. The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
Thanks!
Ant

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Problem with Reoprt 9i on the web

I have a couple of problems with a 9i report running on the web.
This report uses the following system parameters: DESTYPE, DESNAME & DESFORMAT in the parameter form.
When DESTYPE = 'Cache', no value in DESNAME, DESFORMAT = 'PDF', the PDF output is perfect.
When DESTYPE = 'File', DESNAME = 'MyFile', DESFORMAT = 'PDF', it writes to the file perfectly and comes back with a Oracle Reports Job Status - Successfully run.
Scenario 1
However, if the DESNAME has a value, e.g. MyFile, it will output into the named file even though the DESTYPE = 'Cache'. Why?
Additionally, I will also get an Acrobat Reader message -'File does not begin with '%PDF'. What is causing this?
Scenario 2
In addition to the above, I have a user parameter which has a LOV of 'Cache', 'File'. The DESTYPE is suppressed from the parameter form. Instead the DESTYPE value is set by the After Parameter Form trigger with the LOV value.
The report runs but it does not come back with a Oracle Reports Job Status - Successfully run message. Why has this message disappeared?
Also the Acrobat Reader message - 'File does not begin with '%PDF' still appears.
Any help will be appreciated!!!
Thanks.
John

Hello John M Ng,
The problem you are facing is because of a known issue in Reports 9i, due to which DESTYPE=CACHE used to fail when a DESNAME was specified along with it. This bug has been fixed in Reports 9i Patch 2 (9.0.2.2). Please install this patch in order to get the fix.
Thanks,
The Oracle Reports Team.

Steps to link a report to web form

Hi friends,
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx file, it is as follows:
Private Sub ConfigureCrystalReports()
        Dim fileName As String = "Reports\" & ReportID & ".rpt"
        Dim reportPath As String = Server.MapPath(fileName)
        myRepDoc = New ReportDocument()
        myRepDoc.Load(reportPath)
        myCrystalReportViewer.ReportSource = myRepDoc
        'myCrystalReportViewer.RefreshReport()
        Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        If Session("reportConnectionInfo") IsNot Nothing Then
            Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
            myConnectionInfo.ServerName = ConnInforArrList(0)
            myConnectionInfo.DatabaseName = ConnInforArrList(1)
            myConnectionInfo.UserID = ConnInforArrList(2)
            myConnectionInfo.Password = ConnInforArrList(3)
        Else
            lblMessage.ForeColor = Drawing.Color.Red
            lblMessage.Text = "Session is off. Please Relogin to See the Report."
        End If
        SetDBLogonForReport(myConnectionInfo, myRepDoc)
        SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
        myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
        myCrystalReportViewer.Visible = True
    End Sub
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
    End Sub
    Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
        For Each mySection As Section In mySections
            Dim myReportObjects As ReportObjects = mySection.ReportObjects
            For Each myReportObject As ReportObject In myReportObjects
                If myReportObject.Kind = ReportObjectKind.SubreportObject Then
                    Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
                    Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
                    SetDBLogonForReport(myConnectionInfo, subReportDocument)
                    If myReportObject.Name = "Subreport1" Then
                        Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
                        If Not lvSec Is Nothing Then
                            Dim t1 As TextObject
                            t1 = lvSec.ReportObjects("txtEmpName")
                            t1.Text = Session.Contents("EmpName")
                            Dim t2 As TextObject
                            t2 = lvSec.ReportObjects("txtRepID")
                            t2.Text = Request.QueryString("REPID")
                        End If
                    End If
                End If
            Next
        Next
    End Sub
Please do help me out.
Thanks and regards

Hello Md. Mushtaque,
Please post this query to the [.NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio; forum.
This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
The forum is monitored by qualified technicians and you will get a faster response there.
Also, all Crystal Reports .NET Development queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Problem with links for external user

Hi,
We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
Thanks for help,
Sven Keller

We already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
If somebody receives an email (e.g. subscription) the URL to the folder is:
http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
But it should be:
https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
Message was edited by:
Sven Keller

How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000

Post Author: ltkin
CA Forum: WebIntelligence Reporting
Hi,
How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000 ?
Regards,

Hi ltkin,
Unfortunately, it is not possible in Xir2 to create Webi reports from stored procedures.
Webi reports can only be created from Universe. So in Business Objects XIR3 we can create a special universe that enables Web Intelligence user's to access stored procedures residing in the database. This is the only way that Web Intelligence user's can access stored procedures.
Please let me know if the above information helps.
Regards,
Pavan

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem with printing some report

hi very body
we have some problems with printing some reports.
the problem is when printing a report the computer processes stoped
and i should restart the computer a gain to print the report for first time and
then in the second time i have same problem.

Maher,
You can check out the new printer driver test utility verions2.0 on OTN at:
http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
This should help you determine if it is a printer problem or whether you should look into another area.
Also, you don't mention which version of reports, what command line options your using, the computer
configuration your using whether it is a network printer or local printer connected to the machine. Support
will need this information to help determine where your problem lies.
Regards,
The Oracle Reports Team

Indesign CS6 on MACs with OS 10.8 are having problems with links

Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. Miller

Thanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar?

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

I continue to have problems with links in email, they don't Work.

I continue to have problems with links in email, they don't work. When I called apple support she said to hard boot by holding off and home keys and restart. However this is only since the new release of the operating system, it happens ever day and it's getting OLD.. Any solutions?

Yes, almost daily since the iOS update. Is there a permanent solution. And does the hard reboot hurt the iPad?

Practical universe schema design for ad hoc reporting in web intelligence

Hello Folks,
I am in the initial design phase of creating a universe out of normalized tables in oracle database. This current set of table are outside our data warehouse methodology and work flows. The new Universe will be used for ad hoc query by limited users. There are about 25-30 tables with employee data/attributes (mostly HR data). Since these tables are all dimensions with employee information on various subjects like education,address, training,*employee records* etc, what should be my join strategy with the existing table schema? where is concept of fact table?. Would you suggest any denormalizing/derived or materialized view to get the right end results. Or do you see any ETL process required before starting this task? My main concern is configuring joins between the tables and performance issue due to many joins in the current physical model. Additionally, i am concerned with employee records component in the structure, as each record of an employee may have multiple event history. How would you handle such a situation (maybe create a seperate context with the main factless fact Employee table??)
I will appreciate your insight and approach to tackle the initial planning phase of this project.
Thanks

...due to the fact that with ad-hoc reports, the links, joins, cardinalities etc may differ from report to report depending on what each individual report would require.
Cardinalities are part of the data model, they should not change based on report requirements.
As far as the rest, yes, designing a flexible universe can be challenging. You have the option to set up different join paths (called contexts) for different functional areas, but in some cases it just makes sense to build more than one universe on top of the same data structures.
For an example, consider a very simple case where there is a relationship between an employee and the company motor pool (collection of company cars). The HR person wants to see all people even if they don't have cars assigned to them, so they would require an outer join from Employee to Car. The motor pool manager wants to see all cars, even those that are not currently assigned to a person, so they would require an outer join from Car to Employee. These two requirements are contradictory, and so cannot be designed into a single universe. That's not a problem, it's simply something that needs to be recognized and responded to. An HR person is not likely to care about when the next oil change is due, and the motor pool manager probably does not care about the hire date for a particular person.
Web Intelligence makes an excellent ad hoc query engine, but it does require some investment in a proper universe structure.

Problem with linking to reports in Web Intelligence XiR2

Similar Messages

Maybe you are looking for