Problem with monitor a job

Hi all,
I am running a job which loads data from one DSO to another DSO . The update rules have a start routine which extract data from APO livecache using 2 -3 functional modules for some characteristics of the target DSO .
Earlier this load was taking 1.5 hours to finish but now its just taking more than 4 hours and this job is occupying all system resources and so other jobs are kept in hanged state.
I want to know :
1> How can i monitor the jobs ? i mean how to monitor the jobu2019s system resource utilization (number of processors) ?
2> How can i reduce the time of load ?
Thanks
Sam
Edited by: Samir Bihari on Nov 12, 2009 10:40 AM

Hi,
With job monitoring, you can monitor individual jobs in the Alert Monitor with regard to status and runtime. This is an important extension of the monitoring of the background runtime environment (see Background Processing Monitor), in which the general status of the SAP background processing is monitored (for example, with regard to utilization or job terminations).
The job monitoring is used to monitor jobs that run regularly, that are always scheduled using a particular name or name pattern (such as a fixed job name with a timestamp). A job of this type is called a job chain.
For more info go through the below link
http://help.sap.com/saphelp_nw70/helpdata/en/60/cd49ff274aa240a7291286ec797618/content.htm
If your Data load are independent with each other you can schedule in Parallel and this will reduce your data load time with comparison to series load. When you are loading data in parallel, you have to keep your Background workprocess in mind. If you have three workprocess and four parallel data load in process chain, fourth will wait until it gets the free workprocess.
The staging process of any significant volume of data into SAP BW presents challenges to system resource utilization and timeliness of data. This session discusses the causes of data load performance issues, highlights the troubleshooting process, and offers tuning solutions to help maximize throughput. Many aspects of data load performance analysis and tuning are covered including extraction, packaging, transformation, parallel processing, as well as change run and aggregate rollup.
For more info go through the below link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b&overridelayout=true
Regards,
Marasa.

Similar Messages

Problem with Crystal Report Job Server Destinations

I am using Crystal Reports XI Server and I am having problems with scheduling. I believe that the problem is that I have not enabled any destinations under the Crystal Reports Job Server. The following is an observation list:
-Enabled and set up all destinations for other servers, such as the Destination Server.
-Have been able to use Infoview to directly email, inbox, and file save reports in different formats (I believe the Destination Server controls this, right?)
-All servers are enabled in the Central Configuration Manager
-Have been able to go into the Crystal Reports Job Server within the CMC, but I DO NOT FIND ANY destinations to enable (why is this?)
-Have not been able to schedule an instance of any report (neither email, nor inbox, nor file, ...nothing)
Could somebody please help me with this? Is this a limitation to the Crystal Reports XI Server vs the Enterprise edition? Is there something else I am missing? I have never been able to successfully schedule a report.

Thank you for the input, but I have not yet solved my problem. Please allow me to provide some additional information which may give more hints:
I have Crystal Reports XI Server R2 installed as 5 named user license (version that comes with developer)
The following servers are enabled in CMC (which is all of them)
-Input.DomainNameSQL
-DomainNameSQL.cacheserver
-DomainNameSQL.cms
-DomainNameSQL.destinationjobserver (has all destinations enabled)
-DomainNameSQL.eventserver
-DomainNameSQL.ListofValuesJobServer (no destination tab)
-DomainNameSQL.pageserver
-DomainNameSQL.programjobserver (has all destinations enabled)
-DomainNameSQL.RAS
-DomainNameSQL.reportjobserver (has destinations tab, but there are no destination entries to enable! Object type is: CrystalEnterprise.Report and detail: IDL:omg.org/CORBA/UserException:1.0
. Details: %2.'
These are the ONLY two event IDs that appear after I schedule the report instance. No other events occur.
Are there any other logs that I can check? How do I look up what event ID 45387 and 45385 are?
Thanks!

Problems with Monitor after Hard Drive Replacement

I never had any problems with my iBook G4 until the past 6 months. I sent it in once because it wouldn't start up. They were able to fix the problem without replacing the hard drive. It malfunctioned again and the second time they had to replace the hard drive. I've had it back for about a month and 1/2 now and for the past three weeks, whenever I try to use it I get problems with my monitor. I'm not sure if the video card is going out or what? The image on the screen gets chopped up in horizontal and vertical line increments. Its really hard to explain but sometimes it comes in waves and I have to shut down my computer and walk away from it. Other times like right now, I'm able to use it for up to an hour but then it gets choppy again and I can't use it. My Apple Care Protection Plan expires in December and I want to get as much from it as I possibly can before I have to replace the laptop altogether.

sorry,
to clarify, "internal or external;" display
internal = ibook display
external = display connected via display adaptor
Ok, well I max out the graphics on my ibook on regular intervals (games, high-end graphics work, gigabyte photoshop files etc...)
It isn't likely to be the hardware, so here's some suggestions.
LOOSE WIRES/CABLES:
The ibook's internal monitor connects through the central pivot where the ibook opens, the wires in here may be damaged. (you can't fix this yourself, refer it to apple) this could pertain to a loose or defective cable is you are using and apple display connector also.
REFRESH RATE: (this sound like your problem)
to quote a source:
"If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down or across the monitor slowly or fast. This may also cause a flickering affect."
http://www.computerhope.com/issues/ch000242.htm#02
This is set in display preferences. try setting your monitor's refresh rate. (75hz is good)
INTERFERANCE:
Monitors are succeptible to electromagnetic interferance: Speakers, hard drives, phones etc. try moving them away from the monitor.
BAD MONITOR:
finally; and we hope this isn't the problem. if you are not already doing so, connect an external monitor to the ibook using the display connector (VGA only), if the issue persists with the external monitor the problem is software based, if not you probably have once of a small percentage of monitors that just goes "bad" after a time period, unfortunately it's often cheaper to replace an entire unit as opposed to the screen itself (new computer)
Message was edited by: Peter Miller

Problems with monitor -slowing down MAC

Hello, I have a late 2013 MacBook Pro (OS X 10.9.5) and am trying to connect it to a Hanns.G HL 193 monitor. I already have the apple miniport to connect with the VGA monitor cable. However, when I plug it in, the mac becomes veeeery slow (the arrow won't even move correctly) and the monitor just won't light up. The monitor works fine with PCs. The Macbook seems to recognize it, as I can see it in the "displays" option, but it just wont allow me to make it work. What are the exact steps i need to take to make this monitor work? Could it be a problem with the model?
Thank you

amurta,
The article linked below details a number of troubleshooting steps (such as resetting your Mac's SMC and PRAM) that can help get your external display and adapter to work correctly with your Mac.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/en-us/HT201177
Cheers,
Allen

Web AS 6.40 Sneak Preview: Problems with monitoring Database with SQL Studi

Hello!
I'm new with SAP and SAP Web AS, and I installed the SAP Web AS 6.40 Sneak Preview recently. I'm exercizing with the tutorials, and in the Tutorial "Car rental Application", a "QCR_RESERVATION" database is created and deployed.
The deployment worked fine, but I'm having problems accessing the SAP DB with SQL Studio.
At first, I didn't find SQL studio in my SAP installation, so I installed it afterwards. I now tried to log on with the data mentioned in the tutorial (localhost, C11, SAPC11DB and "sap"), and got the error "Database not running (-709)". Looking at the SAP Management Console, I found a database with the name "J2E", so I tried this one.
But now the problem is, that with user SAPJ2EDB and password "sap", I get the error "(-4008) Unknown username and password", and the same error with the combination "control", "control".
What is my mistake? Could anybody give me a hint? Maybe there is something wrong with my Web AS 6.40 Sneak Preview Installation? I don't remember having changed any settings during installation ...
Thank you in advance
Bärbel Wolf

Dale, thank you very much.
Your hint really is useful, I know myself, I'd most probably need unlocking my admin user soon. )
But nevertheless, I'm still looking for the right password for the database user "SAPJ2EDB".
As I'm encountering problems with the "Quick Car Reservation" tutorial (the entity bean seems unable to access the database, too), I'd like to check the QCR_RESERVATION database with my SQL Studio. Maybe there's something wrong with it.
Greetings
Bärbel

Problem with monitor driver

Hello,congratulations for the forum ,its a great idea!!!
I have a problem with my lenovo T61.
I have tried to to install this:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62923
But i can not!!!
I am going with the instructions but every time i am trying to update the driver this message comes:
http://www.divshare.com/download/5371776-066]
Have you any idea what i can do...I can not install the graphic card drivers without it!
I forgot to say that i have windows XP Sp3.
Thank you very much!!! :-)
Message Edited by ge0rge007 on 09-14-2008 11:34 AM

Hello,
I would suggest to download MS NET 2.0, then catch the program System Updater form Lenovo Homepage.
Run it and see which updates the programm is offerering to you.
You choose by yourself, which one do you want to install.
Please read the installation instructions carefully.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Problem with EXEC services Job

Hi,
We are facing problem in Solution Manager 3.0 with EWA report generation. For the scheduled date of EWA , the job RDSMOPBACK_AUTOSESSIONS failed with an error CONNE_ILLEGAL_TRANSPORT_HEADER.
Can anybody , faced or have an solution for the same.
Regards,
Narender

Hi Narender,
usually, this kind of dump is related to a corrupted data collection for the EWA session.
I recommend to delete the download (run DSA, enter the 13 digits session number, choose display and click on the truck symbol, there should be possibility to delete the data). The processing job will run again. You may collect the data in SDCCN again or just create a new EWA session in Solution Manager.
Best regards
Ruediger Stoecker

Problems with monitor ho pavilion 22xi

When I connect the HDMI cable between playstation3 and monitor, the monitor recognizes the source but no longer returns any remaining image in black screen. the problem is neither the cable nor the playstation because I tested it with another monitor and work. I await your response. thank you
Italy 19:54

Hello @Pier95,
I understand that your HP Pavilion 22xi Monitor is detecting your PS3, but not displaying anything. I suspect an issue with the display resolution coming from your PS3. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If it does I think it would be best if you contact HP Technical Support for repair options. If it does not however I recommend you try the PS3 Knowledge Center post Change PS3 Video Settings.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Problems with monitor/resolution after software update

I installed the latest security update tonight, and now my monitor no longer properly works with my mini. I have a Dell 2005FPW. I was using 1680x1050 resolution with no problems. When I rebooted after the update, I noticed my resolution had been changed... and now the mac only detects my display as a "VGA display" and I can't select that resolution any more! The monitor still works fine with my PC.
How can I get my 1680x1050 back??
Mac Mini Mac OS X (10.4.5)

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

Problem with monitoring

I have a problem when i monitor thru my BlackMagic Design Decklink to my video monitor. I see my 16/9 anamorphic image in letterbox. I have to zoom in my image in my monitor settings to see it in full frame. When i'm in FCP, the monitoring thru the same card is right. The problem is only in Color. Anybody can help me?

Final cut sequence settings : PAL 720 * 576
BlackMagic settings in final cut : PAL 10 bit 720*576
Color dispaly settings : Video output PAL 10 bit
Type of monitor : PAL TV connected via composite cable
Like i said with that setup, everything's OK in FCP, not good in Color. Also, it worked OK with Color for 2 years before that.
I just found a workaround!! I set the Color video output to HD 1080i and in the preference of the BlackMagic i use the process "HD to SD anamorphic" and then it works OK. It's weird of having to do this but that works.

Problem with Acrobat print job being stuck in queue

I have Acrobat 7.0 Pro and I do a lot of print to Acrobat PDF 7.0 from web pages. When I go to print from Safari and pick the printer Acrobat PDF 7.0,
the pages will process and bring the PDF up in Acrobat.
However, if I then want to print another page, I have a problem. Many times, the previous print job has a status of printing in the queue even though it is complete.
If I delete the job, the next job will complete.
Something is not completing or deleting completed jobs in my queue.
Any help would be great.

Thank you for the response. This has always worked for me in the past. I can print a web page to acrobat, then even print another one and the next file (pdf) is created no problem. In the past, the print job has gone away as soon as the file was created.
I will try the permissions fix and see what happens.
Shane
Hi there,
With the page that has opened in Acrobat, do you save
this document before you try to print the next
document. I am thinking that maybe the spooler is
expecting you to do something with the file that has
printed before it releases it from the queue.
I would also try running a Repair Disk Permissions.
This is located in Applications > Utilities > Disk
Utility. This can resolve permissions on files that
may be stopping the spooler from finishing.
Regards,
Paul

Problems with Monitor in OS 10.1.3

Hello there. Only just upgraded to OS 10.1.3. Having trouble with my monitor. Its on 600 x 300 and I cant open the display settings to adjust the resolution. Can anyone help!?
G4 400mhz Mac OS X (10.1.x)

Hello there! Its ok, ive sorted it. My housemate and I swapped monitors and it works fine now! Wahey! Its weird becuase mine works fine on his PC!? Strange!
Thanks for trying to help though man! BUT!....
I suddenly have another problem. I reinstalled OS10.1.3 just before we did the monitor swap to see if it would make a difference, it didnt, so we tried the monitor swap, now it works fine. Went to updater and updated to OS10.1.5 and a few other things, now when I try to update it cant seem to find the internet! It tells me to 'check configuration'
I can go on the internet in Internet explorer no problems so I downloaded MSN messenger. But for some reason, that cant find the internet to connect me! I presume the two things are from the same fault. If its not one thing its another! Any ideas about this one?

Problem with back ground job

Hello experts,
I have one background job which generates a text file and place it in a FTP folder.
When one user runs this job its working fine. But,
When two users run <b>the same background job at same time,</b> then i get trouble with my output file as the data is mixed up.
How to avoid this! Appreciate quick response.

Have each run of the job create a unique file OR when a user starts a job, create a "marker" file that prevents all other runs of the same prg from executing until the marker file is deleted.
The deletion of the marker file would need to be the last step of the prog then. This would allow the second user to run the prog later (after the first user is done).

Problem with EXPDP failed job

Hi,
I started one job name expschema for expdp
I break that job and remove .dmp files.
i used STOP_JOB command.
when i tried to run job with same name it throws error.
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYSTEM.EXPSCHEMA"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 871
ORA-00955: name is already used by an existing objectany one suggest me how to clear old job name
i can't use kill_job as i removed files from server
Thanks

ChetanS wrote:
Hi,
I started one job name expschema for expdp
I break that job and remove .dmp files.
i used STOP_JOB command.
when i tried to run job with same name it throws error.
ORA-31626: job does not exist
it seems like you encountered this error due to the next ora which is
ORA-31633: unable to create master table "SYSTEM.EXPSCHEMA"so check if you valid usage settings for that table, if table exists , etc
also
what's with the following lines, did you check that
ORA-06512: at line 95
ORA-06512: at line 871any one suggest me how to clear old job nameok
i can't use kill_job as i removed files from server
Thankscheers

Problems with Monitor

Have just brought a new computer running windows 8.1 but kept my original Monitor which is HPw1907 originall brought in 1907.Some game will not run on the full screen, either the mouse pointer is very unsteady or the screen just goes white. Sats the resolution is wrong but it is set to the reccomended level.Do you have any suggestions on how I can correct this. Thanks

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how some games played on your desktop computer will not run on a full-screen resolution, and that the screen goes white. I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Display Quality Issues, which should help with the resolution being displayed on the monitor. If your computer's display still comes up as white, or does not go to a full screen resolution, I recommend following the steps below: I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If the monitor still does not run on the full screen, or the screen just goes white, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

Problem with monitor a job

Similar Messages

Maybe you are looking for