Problem with Oracle RAC with DRCP and persistent connections
Hello,
I am having a problem that has me stumped. I cannot get SCAN, and DRCP to work together nicely.
Right now, I can connect through my scan hostname fine without connection pooling, once I enable it I start having connection time outs. I found if I specified outbound_connection_timeout in sqlnet.ora that it times the connection out to the time I set in there. If I don't set this option I get a "ORA-12170: TNS:Connect timeout occurred".
The odd thing is I can leave connection pooling on and connect to one of my rac instances individually and it doesn't experience this problem. The only time it pops up is if I combine multiple rac instances (Through the use of SCAN or tnsnames.ora) and I enable connection pooling.
I don't know which direction to go to even diagnose this, so any and all help is appreciated.
Thank you.
Edited by: Rarp on Oct 1, 2011 10:47 PM
Hi,
You need to detail the problem. Enable TRACE SQL*NET on the server and client using note below.
How to Enable Oracle SQLNet Client , Server , Listener , Kerberos and External procedure Tracing from Net Manager [ID 395525.1]
Also you can try check this note:
11g: ORA-12170 With Combination RAC, DRCP and a Firewall [ID 953277.1]
Hope this helps,
Levi Pereira
Similar Messages
-
Suncluster with oracle RAC customer
Hi,
Are we have any customer reference for suncluster with Oracle RAC.
Suggestion and recommendation are welcome.
Thanks in advance,
karthikeyan.Nkarthikeyan.N
There are many hundreds customers running this combination, totalling many thousands of nodes. Not all are (or want to be) public references. Some are listed here though:
http://www.sun.com/third-party/global/oracle/success/index.jsp#s10
Tim
--- -
Sun Fire V490 x 2 servers with Oracle RAC facing Split brain problem
Hi all,
I have Sun Fire V490 x 2 servers with Oracle RAC and they faced a Split brain problem. One of the node's database instance has gone down, The DBA claims it is due to network problem, but as such the networks are OK. We use the on board CE1 interface for Cluster interconnect and CE0 as the public interface.
Did anybody face this kind of a problem? Could this be a hardware/OS patch problem?
I had kept a continuous ping for 24 hours after this happened last time and the output shows no packet loss
Many thanks in advance.
Ushas SymonIn order to diagnose this properly, you'll need to provide too much detail and far too many log files for a generic discussion forum to handle.
Use your service contract and open a support case.
Because a cluster environment is involved you'll likely end up talking to the cluster support staff.
They can analyze hardware and software errors as well as review whether you configured the systems in a supportable fashion.
Be prepared to make a direct connection to each system and gather data using such as by using the Explorer tool. The technical support staff will tell you what they will actually need. -
JDBC Problem with Oracle 8.1.7. and OC4J Version 2
I use the following connection statement with Oracle 8.1.7. and JDeveloper 3 and Apache Server. It works fine.
String user = "scott/tiger";
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:"+user+"@RDL");
The same program does not obtain the connection with JDeveloper 9i, OC4J Version 2 and Oracle 8.1.7. I do not receive any error message, no exception is thrown.
Please help me.Hi Avi,
I had already tried the thin Diriver but after yout help I try again.
With this thin driver, I received a SQLException which helps me.
As usual, there were a lot of different problems. The main one was that my default configuration do not use the jdbc/lib817 main jdbc/lib. There is a classe12.jar in these libs that are apparently different.
Finally, I obtain the connection with the "thin" driver.
Thank you very much Avi!
Reni -
Tuxedo -Oracle RAC ,
We are planning to upgrade the Tuxedo Environmet to o Support Oracle-RAC , with Single Database server with Two Instances .
***At the moment we have ceratin Tuxedo Services ( part of a transaction ) to connect Database , which is used by more than One Application ie The connection Services to the Databse is COMMON.***
Eg: we have service named DBSERVICE1 , which is connecting to a datbases , which also part of a Transaction , This DBSERVICE1 is used by more than one channels ( ATM/internet banking , phone banking etc )
we have more than one service like DBSERVICE1
With this architecture how we can effectively achieve Tuxedo -Oracle RAC High Availability.
Is is possible to specify in the Tuxedo Configuration like this " if the instance1 is down , use the Instance2"?+
Thanks in Advance.
Nadeer.
Edited by: user10229565 on Nov 11, 2008 11:30 PM
Edited by: user10229565 on Nov 11, 2008 11:36 PMHi Nadeer,
In Oracle RAC 10g a single global transaction that spans more than one RAC instance, yet connected to a single database will not work, i.e., you may not get transactional integrity. To solve this problem, Tuxedo introduced RAC support by way of the TUXRACGROUPS environment variable. This environment variable tells Tuxedo about the RAC configuration, i.e., which RAC instances are connected to which RAC databases. Actually it tells Tuxedo which groups of Tuxedo servers can safely participate together in a single global transaction. Using that environment variable, Tuxedo will alter its request routing algorithm so that once a transaction is started, all subsequent service requests that are part of that transaction will only be routed to servers in Tuxedo groups that can safely participate in the transaction. So if we use a simple example where there are two RAC instances R1 and R2 connected to a single database D1 and we have Tuxedo groups G1, G2, G3, and G4, where the openinfo string for G1 and G3 connect to R1 and G2 and G4 connect to R2. If a server in G1 starts a transaction, or is called by a client that has started a transaction (assuming TUXRACGROUPS has been defined properly), Tuxedo will only route all subsequent requests that are part of that transaction to servers in G1 or G3. Thus Tuxedo will prevent a transaction from ever spanning 2 or more RAC instances connected to the same database.
Again, I encourage you to read the documentation for RAC support in Tuxedo as it gives several examples and describes in detail how to define TUXRACGROUPS.
Also note that this entire problem essentially goes away in Oracle RAC 11g.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Enterprise User Security (EUS) with Oracle RAC database
Hi all,
i'm experiencing a problem configuring centralized AAA on Oracle OID for Oracle RAC Database.
My environment is:
1) Oracle OID 10g (192.168.15.245 - rh4oidserver.klab.it)
2) Oracle RAC database 11g
I successfull configured a standalone Oracle Database to authenticate user in OID centralized repository, but i'm experiencing different problem to do, with RAC, same things.
In dept:
1) Oracle RAC works correctly and internal user (SYS,Oracle, ecc.) are correctly authenticated and authorizated against database
2) Oracle RAC register himself in OID (see attached snapshoot)
3) I run sqlplus to connect on Oracle RAC using OID users and i get following error: ORA-28030 Server encountered problems accessing LDAP directory service
Using a sniffer, i can see a reset message after SSL handshake (SSL v3 encrypted alert), but i don't undenstand root cause....
Host file on RAC server is:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public
192.168.15.177 orclrac1.klab.it orclrac1
192.168.15.178 orclrac2.klab.it orclrac2
#Private
192.168.1.100 orclrac1-priv.klab.it orclrac1-priv
192.168.1.105 orclrac2-priv.klab.it orclrac2-priv
#Virtual
192.168.15.88 orclrac1-vip.klab.it orclrac1-vip
192.168.15.96 orclrac2-vip.klab.it orclrac2-vip
92.168.15.184 openfiler.klab.it openfiler
192.168.1.90 openfiler-priv.klab.it openfiler-priv
192.168.15.246 acti.klab.it acti
#192.168.1.245 rh4oidserver.klab.it rh4oidserver
192.168.15.245 rh4oidserver.klab.it rh4oidserver
tnsname.ora is:
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
RACDB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = racdb.klab.it)
(INSTANCE_NAME = racdb1)
RACDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = racdb.klab.it)
LISTENERS_RACDB =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
RACDB2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = racdb.klab.it)
(INSTANCE_NAME = racdb2)
ldap.ora is:
# ldap.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/ldap.ora
# Generated by Oracle configuration tools.
DIRECTORY_SERVERS= (rh4oidserver.klab.it:389:636)
DEFAULT_ADMIN_CONTEXT = "dc=dbtest101,dc=klab,dc=it"
DIRECTORY_SERVER_TYPE = OID
sqlnet.ora is:
# sqlnet.ora.orclrac1 Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.orclrac1
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (LDAP,TNSNAMES)
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /u01/app/oracle/admin/racdb)
listener.ora is:
# listener.ora.orclrac1 Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora.orclrac1
# Generated by Oracle configuration tools.
LISTENER_ORCLRAC1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.177)(PORT = 1521)(IP = FIRST))
LISTENER_ORCLRAC2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.178)(PORT = 1521)(IP = FIRST))
Thank's in advance for any help or suggestion.
AntonioHello bipkary,
what version are you using?
the following link tells you everything about EUS in oracle10g R2:
http://download.oracle.com/docs/cd/B19306_01/network.102/b14269/toc.htm -
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
SQLLoader issues of Oracle RAC with ASM
One of our client wants to use Oracle RAC with ASM for our application, i just want to know if there would be any two-phased commit transactions and SQL*Loader issues in ASM.
Database is Oracle 10gASM works only at storage layer and has nothing to do with:
- distributed transactions
- client executable that connects to database instance: SQL*Loader, SQL*Plus, etc.
RAC has also nothing to do with distributed transactions: a RAC database is a single database with multiple instances but still a single database; there is no need to use distributed transactions because you have a RAC database.
Edited by: P. Forstmann on 24 févr. 2011 13:27
Edited by: P. Forstmann on 24 févr. 2011 13:31 -
SAP EHP6 Installation Steps with Oracle RAC
Dear Experts,
i am looking for step by step guide for SAP ehp6 installation with Oracle RAC. if anyone can help please guide me with the steps or share if any document available
ThanksHi Wali,
You can follow below documentation to perform your installation on Oracle RAC.
http://scn.sap.com/docs/DOC-8835
This document is very useful for planning the installation and executing the same
Some other useful documents
Installation of SAP on RAC with Oracle ASM
SAP note which needs to be referred for installation
Note 527843 - Oracle RAC support in the SAP environment
Hope this helps.
Regards,
Deepak Kori -
Does NFS support Oracle RAC with TAF ?
Hi,
Does NFS support Oracle RAC with TAF feature. ?
If yes, please point to some valid document to prove the same.
Regards
SumitTAF has nothing to do with the underlying storage architecture and is therefore 'supported' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the certify tab in metalink. Some information can also be found here
TAF will be available on any rac installation, but not all drivers support it (jdbc-thin for example)
Bjoern -
Oracle RAC with more then two nodes?
Hello,
knows anybody a reference client project that use Oracle RAC with more then two nodes on a Linux environment?
Many thnaks!
Norman BockHello Norman,
XioTech is a SAN company that has a project called "THE TENS". They configured and ran a 10 node RH Linux Oralce 9i RAC. I understand they want to see if 32 are possible. I am sure if you ask them, they would be happy to give you the details.
http://www.xiotech.com/
Cheers -
Is OCFS2 certified with oracle RAC 11gR2 ?
Hi,
Is OCFS2 certified with oracle RAC 11gR2 ?
Thanks..ocfs2 is certified for oracle 11gr2 but oracle recommends using asm. please see this for more information http://download.oracle.com/docs/cd/E11882_01/install.112/e10812/storage.htm#CWLIN262
-
Oracle RAC 10g R2 And SUSE SLES10
Hi there guys
I downloaded oracle rac 10 R2 and tried to install it using OpenSuse Linux 10.1
which resulted in an unsoported OS error.. the documentations says about SLES9
which I do not have, my provider has SLES10, I'd like to know is If need
SLES9 at all, or if I can install it using SLES10 which is newer of course,
I do not want to buy SLES10 if it wont work anyway.
Thanks in advance, sorry for my very basic question.Pl indicate which version of 10gR2 - only 10.2.0.5 is supported on Win 2008 R2
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
Pl also post in the RAC forums - RAC, ASM & Clusterware Installation
Srini -
Start up problem with Oracle RAC 11g
Hi all,
After a power failure I can not start a oracle database it give me the ORA-01031: insufficient privileges error
[oracle@hostname ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Tue Jul 23 19:06:41 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> show sga
Total System Global Area 283930624 bytes
Fixed Size 2212656 bytes
Variable Size 256552144 bytes
ASM Cache 25165824 bytes
SQL> disconnect
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Real Application Clusters and Automatic Storage Management options
SQL> connect as sysdba
Enter user-name: system
Enter password:
Connected.
SQL> startup
ORA-01031: insufficient privileges
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Real Application Clusters and Automatic Storage Management options
[oracle@hostname ~]$ lsb_release -a
LSB Version: :core-4.0-amd64:core-4.0-ia32:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-ia32:printing-4.0-noarch
Distributor ID: EnterpriseEnterpriseServer
Description: Enterprise Linux Enterprise Linux Server release 5.7 (Carthage)
Release: 5.7
Codename: Carthage
[oracle@hostname ~]$
[oracle@hostname ~]$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE sil-rac1
ora....ER.lsnr ora....er.type ONLINE ONLINE sil-rac1
ora....N1.lsnr ora....er.type ONLINE ONLINE sil-rac2
ora....N2.lsnr ora....er.type ONLINE ONLINE sil-rac1
ora....N3.lsnr ora....er.type ONLINE ONLINE sil-rac1
ora.asm ora.asm.type ONLINE ONLINE sil-rac1
ora.eons ora.eons.type ONLINE ONLINE sil-rac1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE sil-rac1
ora.oc4j ora.oc4j.type ONLINE ONLINE sil-rac2
ora.ons ora.ons.type ONLINE ONLINE sil-rac1
ora.orcl.db ora....se.type ONLINE ONLINE sil-rac1
ora.scan1.vip ora....ip.type ONLINE ONLINE sil-rac2
ora.scan2.vip ora....ip.type ONLINE ONLINE sil-rac1
ora.scan3.vip ora....ip.type ONLINE ONLINE sil-rac1
ora....SM1.asm application ONLINE ONLINE sil-rac1
ora....C1.lsnr application ONLINE ONLINE sil-rac1
ora....ac1.gsd application OFFLINE OFFLINE
ora....ac1.ons application ONLINE ONLINE sil-rac1
ora....ac1.vip ora....t1.type ONLINE ONLINE sil-rac1
ora....SM2.asm application ONLINE ONLINE sil-rac2
ora....C2.lsnr application ONLINE ONLINE sil-rac2
ora....ac2.gsd application OFFLINE OFFLINE
ora....ac2.ons application ONLINE ONLINE sil-rac2
ora....ac2.vip ora....t1.type ONLINE ONLINE sil-rac2
[oracle@hostname ~]$
[oracle@hostname ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[oracle@hostname ~]$
Does anyone know what can be the problem?
Thanks,
Andre GilThanks for your answer
The OS user I'm log is ORACLE that own the filesystem, Before you ask ORACLE is part of OINSTALL and DBA group
Any other suggestion
[oracle@sil-rac1 ~]$ id
uid=1100(oracle) gid=1200(dba) groups=4(adm),100(users),1000(oinstall),1200(dba)
[oracle@sil-rac1 ~]$ env | sort
BASE_PATH=/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
_=/bin/env
CLASSPATH=/u01/app/11.2.0/grid/JRE:/u01/app/11.2.0/grid/jlib:/u01/app/11.2.0/grid/rdbms/jlib
DB_HOME=/u01/app/oracle/product/11.2.0/db_1
G_BROKEN_FILENAMES=1
GRID_HOME=/u01/app/11.2.0/grid
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=sil-rac1
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/u01/app/11.2.0/grid/lib:/lib:/usr/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/11.2.0/grid
ORACLE_HOSTNAME=sil-rac1.silanis.com
ORACLE_SID=+ASM1
ORACLE_TERM=xterm
ORACLE_UNQNAME=RAC
PATH=/u01/app/11.2.0/grid/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
TERM=xterm
TMPDIR=/tmp
TMP=/tmp
USER=oracle
[oracle@sil-rac1 ~]$ -
Load Balance Problem in Oracle RAC 10.2.0.4 (two nodes with CRS)
Hi all,
I have an Oracle RAC 10.2.0.4 with two nodes and I'm having problems with sessions load balance.
The problem is that all connections are going to the node which is enabled as 'master' in RAC, the node who has located .db resource in CRS.
If .db resource is located in node1 all connections are made in node1. In the same way, all connections are made in node2 when .db resource from CRS stack is located in node2.
The connections are made by a pool in Tomcat 6 using RAC service for made the connections.
Any idea?
Thanks in advance.
Here is an example of my net configuration:
listener.ora in node1:
LISTENER_RAC_NODE1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = node1)(PORT = 1525)(IP = FIRST))
tnsnames in node1:
LISTENERS_RAC =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1525))
NODE1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node1)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac)
(INSTANCE_NAME = rac1)
RAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1525))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1525))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac)
********************************************************It is my fault.
It was the connection service. I had one one with preferred option and one without it. Now is working well.
Maybe you are looking for
-
How can I print multiple photos on the same page from iPhoto?
I want to print multiple pictures on one paper. How can I do that from iPhoto? If I select multiple photos they are printed on separate pages.
-
How to open an url via command line?
Hi all, I want to open a pdf file via a command from a web location. I try this: "AcroRd32.exe http://server/path/file.pdf" to do so, but this way results in an error message about bad filename. Is it possible to open a pdf in such a matter? Backgrou
-
Route web shop requests via SAP PI
Dear all, I am facing the following problem. My SAP system is connected with an E-Shop. So orders can be processed via SAP ITS by calling a BAPI in the ECC system. Several countries are operating on this ECC. In future, there will be a new ECC system
-
SCVMM 2012R2 Management Pack for SCOM 2012R2?
Per the requirements of the SCVMM 2012R2 Dashboard Management Pack: http://www.microsoft.com/en-us/download/details.aspx?id=43707 It requires the following files: Microsoft System Center Virtual Machine Manager Library 3.2.7510.0 Microsoft System Cen
-
Does iChat support "rules" the way that mail does? Can iChat parse contents of messages or run scripts? Alternately, does Adium support that, or would anyone recommend another chat application? I'm trying to run scripts on my computer from my phone u