Problem With Push buttons on the selection screen
Hi All,
I've taken 3 push buttons on the selection-screen with the following syntax
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2,
FUNCTION KEY 3.
and have removed the F8 execute button using FM RS_SET_SELSCREEN_STATUS
Now, the problem is i'm able to perform validations using At selection screen but the code after the Start-of-selection is not being triggered.
I mean the processing is being terminated after the at selection-screen.could anyone please tell me how do i trigger some code after the event start-of-selection when a user presses a push button with sy-ucomm = FC01.
Check the below sample program :
REPORT ZLPRWINSPC_TMP .
tables : mara,
sscrfields.
select-options s_matnr for mara-matnr.
initialization.
sscrfields-functxt_01 = 'Clear Selection'.
selection-screen function key 1.
AT SELECTION-SCREEN.
case sscrfields-ucomm.
when 'Clear Selection' or 'FC01'.
clear s_matnr.
refresh s_matnr.
endcase.
Thanks
Seshu
Similar Messages
-
Prob with Push Buttons in the selection screen
Hi All,
1) I have 6 push buttons in the selection screen(Normal Report), 3 in a first row(P11, P12, P13) and 3 in the second row(P21, P22, P23). If I press one push button(for ex P11) the other two Push buttons(P12 P13) should grey out(Inactive mode). If I press P22, P21 & P23 shoul grey out.
2) I need color change for the Inactive push buttons.
Thanks
KrisCan you please post your selection screen definition? I don't understand what you want to achieve by greying out the other pushbuttons when one is pressed.
Does that mean pushing one button will do nothing except greying out the buttons?
Typically when you push a button, you want to continue to execute the required processing for that button not just grey out other pushbuttons and stay in the selection screen.
Anyway, you can achieve that using the following logic. I am not sure how and if you can achieve the color change.
TABLES: sscrfields.
DATA: v_button_pushed(5).
SELECTION-SCREEN PUSHBUTTON /1(10) p11 USER-COMMAND push1.
SELECTION-SCREEN PUSHBUTTON 12(10) p12 USER-COMMAND push2.
SELECTION-SCREEN PUSHBUTTON 23(10) p13 USER-COMMAND push3.
SELECTION-SCREEN PUSHBUTTON /1(10) p21 USER-COMMAND push4.
SELECTION-SCREEN PUSHBUTTON 12(10) p22 USER-COMMAND push5.
SELECTION-SCREEN PUSHBUTTON 23(10) p23 USER-COMMAND push6.
INITIALIZATION.
p11 = 'Push11'.
p12 = 'Push12'.
p13 = 'Push13'.
p21 = 'Push21'.
p22 = 'Push22'.
p23 = 'Push23'.
AT SELECTION-SCREEN OUTPUT.
CASE v_button_pushed.
WHEN 'PUSH1'.
LOOP AT SCREEN.
CHECK screen-name <> 'P11'.
screen-input = 0.
MODIFY SCREEN.
ENDLOOP.
WHEN 'PUSH2'.
WHEN 'PUSH3'.
WHEN 'PUSH4'.
WHEN 'PUSH5'.
WHEN 'PUSH6'.
WHEN OTHERS.
ENDCASE.
AT SELECTION-SCREEN.
v_button_pushed = sscrfields-ucomm. -
Push button in the selection screen
Hi folks,
I need to display a push button the selection screen.its not on the application tool bar..but in one of the selection block in the selection screen..could anybody guide how to do this...
Thanks in advance,
shyam.
Edited by: shyam prasad on Jan 15, 2009 7:34 AMHi Shyam,
Try the following code..
TABLES sscrfields.
TYPE-POOLS icon.
*SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE title,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 28(30) but2 USER-COMMAND cli2
VISIBLE LENGTH 10.
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE sscrfields.
WHEN 'CLI1'.
WHEN 'CLI2'.
ENDCASE.
START-OF-SELECTION.
title = 'Push button'.
but1 = 'Button 1'.
CALL FUNCTION 'ICON_CREATE'
EXPORTING
name = icon_information
text = 'Button 2'
info = 'My Quickinfo'
IMPORTING
RESULT = but2
EXCEPTIONS
OTHERS = 0.
Hope it will be useful..
Regards,
Lakshman.
Edited by: Lakshman N on Jan 15, 2009 7:39 AM -
Problem with ALV and user defined selection screen. please help!
Hi Experts,
I have program which has a user defined selection screen 9001. On executing the selection screen i call a ALV using resuse_alv_grid function module.
What problem I am facing is that when I press back button from ALV page it goes to the se38 editor instead of selection screen.
How to resolve this?
Thanks
GopalHi,
This might be due to LEAVE TO TRANSACTION statement. You might be running the program from SE38. Try to run the program using Z-TCode assigned to it.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was edited by: Bharat Reddy V -
Report should executed based on the radio buttons on the selection screen
Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area - S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumarSee the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
line-size 160
line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
and the component's where used list *
Author : Seshu *
Date : 07/24/2006 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
|----
|----
|----
*12/04/06 | Seshu | DEVK921821 | Removed new page for each material *
======================================================================
Table definition *
TABLES: mast,
stko,
stpo,
T418,
makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
gc_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
wa_stko like stko.
DATA:
Objekttyp 'Material'
otyp_mat(1) TYPE c VALUE '1',
ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data: max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
ueberl_kz(1) TYPE c VALUE '*',
min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
b_flag(1) TYPE c VALUE 'X',
ecfld(250) TYPE c,
v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv,
gt_sp_group TYPE slis_t_sp_group_alv,
gt_events TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_save(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant,
g_default(1) TYPE c,
g_exit(1) TYPE c.
Includes *
INCLUDE .
Internal Table Declaration *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
stufe LIKE stpox-stufe,
vwegx LIKE stpox-vwegx,
END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
INCLUDE STRUCTURE stpox_alv.
DATA: info(3) TYPE c,
END OF alv_stb.
DATA: BEGIN OF stb_orig.
INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
stlty TYPE stpo-stlty,
stlnr TYPE stpo-stlnr,
stlkn TYPE stpo-stlkn,
stpoz TYPE stpo-stpoz,
idnrk TYPE stpo-idnrk,
meins TYPE stpo-meins,
menge TYPE stpo-menge, "Component Qty
END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
stlty TYPE stko-stlty,
stlnr TYPE stko-stlnr,
stlal TYPE stko-stlal,
stkoz TYPE stko-stkoz,
bmein TYPE stko-bmein,
bmeng TYPE stko-bmeng,
END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0, "YHG079407
class LIKE klah-class, "YHG079407
klart LIKE klah-klart, "YHG079407
chked LIKE csdata-xfeld, "YHG079407
noobj LIKE csdata-xfeld, "YHG079407
dsply LIKE csdata-xfeld, "YHG079407
END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stko-stlnr, "BOM Number
bmein TYPE stko-bmein, "UOM
bmeng TYPE stko-bmeng, "Base Qty
expand(1) TYPE c, "Expanding Field
END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
idnrk TYPE stpo-idnrk, "Component (Material)
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stpo-stlnr, "BOM Number
meins TYPE stpo-meins, "UOM
menge TYPE stpo-menge, "Base Qty
END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
HEADER LINE.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01 = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
if p_bomlst = 'X'.
Get the data Based On Material #
perform get_data.
else.
Get the data Based On Component
perform get_data_component.
endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
PERFORM e01_fieldcat_init USING gt_fieldcat[].
PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
when 'PICK' or 'F2'.
if not alv_stb-idnrk is initial .
if not alv_stb-werks is initial.
if not alv_stb-objty is initial.
SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
call transaction c_tcode and skip first screen.
endif.
endif.
endif.
clear alv_stb.
endcase.
*& Form get_data
Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
CLEAR : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
werks = p_werks AND
stlan IN s_stlan AND
stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of Change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
endloop.
ENDFORM. " get_data
Top of page *
top-of-page.
perform report_header .
*& Form report_header
text
--> p1 text
<-- p2 text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using text-h00
sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using sy-title
sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM. " report_header
*& Form calc_col_and_write
text
-->P_TEXT_H00 text
-->P_SY_LINSZ text
FORM calc_col_and_write USING P_TEXT
P_LINSZ.
data: col1 type i,
col2 type i,
len type i,
str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
at sy-colno(len) space.
write at 160 '|'.
ENDFORM. " calc_col_and_write
*& Form write_other_hdr_details
text
--> p1 text
<-- p2 text
FORM write_other_hdr_details.
data: col1 type i,
col2 type i,
len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
sy-pagno.
write: at sy-linsz '|'.
ENDFORM. " write_other_hdr_details
*& Form get_data_component
Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
FROM stpo
INTO TABLE t_stpo
WHERE idnrk IN s_idnrk.
IF sy-subrc = 0.
CLEAR wa_lines.
DESCRIBE TABLE t_stpo LINES wa_lines.
IF wa_lines > 0.
SELECT stlty stlnr stlal stkoz bmein bmeng
FROM stko
INTO TABLE t_stko
FOR ALL ENTRIES IN t_stpo
WHERE stlnr = t_stpo-stlnr.
CLEAR wa_lines.
DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
DESCRIBE TABLE t_stko LINES wa_lines.
IF wa_lines > 0.
*-- Get the BOM item details
SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
WHERE werks = p_werks AND
stlnr = t_stko-stlnr
and stlal in s_stlal.
ENDIF.
ENDIF.
else.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
clear : t_mast.
endloop.
ENDFORM. " get_data_component
*& Form obj_ident
text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
T_stb-objty NE ootyp_mat,
T_stb-objty NE otyp_doc,
T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
T418 einlesen
PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF t418-matin NE '-'
AND t418-txpos IS INITIAL.
aktuelles Objekt ist Material NLAG
T_stb-objty = '1'.
PosKurztext in ObjKurztext uebernehmen.
T_stb-ojtxp = T_stb-potx1.
MODIFY T_stb.
ELSE.
IF T_stb-objty IS INITIAL.
T_stb-objty = '2'.
MODIFY T_stb.
ENDIF.
ENDIF.
ENDFORM. " obj_ident
*& Form t418_lesen
text
-->P_T_STB_POSTP text
FORM t418_lesen USING lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM. " t418_lesen
*& Form cl_clstab_maint
text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
WITH KEY CL_CLSTAB(21)
BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
Klassenposition in Klassenpositionentabelle hinzufuegen
INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM. " cl_clstab_maint
*& Form alv_stb_prep
Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
alv_stb,
stb_orig,
stb_add.
IF t_stb-hdnfo IS INITIAL.
stb_orig = t_stb.
IF t_stb-mngko >= max_num.
stb_add-ovfls = ueberl_kz.
ELSE.
IF t_stb-mngko <= min_num.
stb_add-ovfls = ueberl_kz.
ELSE.
CLEAR: stb_add-ovfls.
ENDIF.
ENDIF.
IF NOT t_stb-xtlnr IS INITIAL.
stb_add-bomfl = b_flag.
ENDIF.
IF NOT t_stb-knobj IS INITIAL
OR NOT t_stb-class IS INITIAL
OR NOT t_stb-kzclb IS INITIAL.
stb_add-knofl = 'X'.
ENDIF.
ELSE.
CHECK t_stb-stufe > 1.
alv_stb-info = 'C30'.
IF t_stb-ttidx <> t_matcat-index.
READ TABLE t_matcat INDEX t_stb-ttidx.
ENDIF.
stb_orig-hdnfo = t_stb-hdnfo.
stb_orig-stufe = t_stb-stufe - 1 .
stb_orig-ojtxp = t_stb-ojtxb.
IF NOT t_stb-altst IS INITIAL.
stb_orig-stlal = t_stb-stlal.
IF stb_orig-stlal(1) EQ '0'.
stb_orig-stlal(1) = ' '.
ENDIF.
ENDIF.
stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
stb_add-dobjt,
stb_add-objic.
CASE t_stb-objty.
WHEN otyp_mat.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN 'M'.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN otyp_noo.
WRITE: stb_orig-potx1 TO ecfld.
stb_add-objic = '@0Q@'.
WHEN otyp_doc.
write stb_orig-doknr to ecfld. "note 489354
IF ecfld CP '*# '. ENDIF. "note 489354
sy-fdpos = sy-fdpos + 1. "note 489354
CONCATENATE
*d stb_orig-doknr "note 489354
stb_orig-dokar
stb_orig-doktl
stb_orig-dokvr
*d INTO ecfld "note 489354
INTO ecfld+sy-fdpos "note 489354
SEPARATED BY space.
stb_add-objic = '@AR@'.
WHEN otyp_kla.
CONCATENATE
stb_orig-class
stb_orig-klart
INTO ecfld
SEPARATED BY space.
stb_add-objic = '@7C@'.
WHEN otyp_ntm.
WRITE: stb_orig-intrm TO ecfld.
WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld. "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
APPEND alv_stb.
ENDFORM. " alv_stb_prep
*& Form get_level_level
text
FORM get_level_level.
REFRESH : T_STB,
T_MATCAT,
ALV_STB.
CLEAR : T_STB,
T_MATCAT,
ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'PP01'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mtnrv = t_mast-matnr
stlal = '01'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = t_stb
matcat = t_matcat
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
Entry der KlassenstatusTab. initialisieren
cl_clstab,
Entry 'Objekte von Klassen' initialisieren
cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
IF NOT t_stb-hdnfo IS INITIAL.
EXIT.
ENDIF.
Object Identification
PERFORM obj_ident.
READ TABLE hd_tab
WITH KEY stufe = t_stb-stufe
vwegx = t_stb-vwegx
BINARY SEARCH
TRANSPORTING NO FIELDS.
?gibt es diesen Satz schon
nein
IF sy-subrc <> 0.
dann in SFP-Infosatzverweistab. aufnehmen
*d APPEND HD_TAB. "HGH054648
hd_tab-stufe = t_stb-stufe.
"HGH054648
hd_tab-vwegx = t_stb-vwegx.
"HGH054648
INSERT hd_tab "HGH054648
INTO hd_tab "HGH054648
INDEX sy-tabix. "HGH054648
PosNr initialisieren
CLEAR: t_stb-posnr.
SFP-InfosatzKz setzen
t_stb-hdnfo = 'X'.
stb-objty = otyp_mat.
"HGE246532
als SFP-Infosatz in die STB aufnehmen
append t_stb.
ENDIF.
*del ENDIF.
clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
index ASCENDING
*del POSNR ASCENDING. "HGC062735
posnr ASCENDING "HGC062735
hdnfo DESCENDING.
LOOP AT t_stb.
T_stb-index = sy-tabix.
MODIFY T_stb.
PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
if sy-tabix = 1.
format color 3 on.
write:/2 'Level',12 'Item',22 'Component',
42 'Material Description',82 'Base Qty',
107 'Base Unit',120 'Assembly Indicator'.
format color 3 on.
endif.
if alv_stb-MEINs is initial.
v_flag = 'X'.
endif.
if v_flag = 'X'.
format color 5 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP.
format color 1 off.
else.
if alv_stb-STUFE = '1'.
format color 1 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs, 120 alv_stb-bomfl .
format color 1 off.
elseif alv_stb-STUFE = '2'.
format color 2 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 2 off.
elseif alv_stb-STUFE = '3'.
format color 3 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 3 off.
elseif alv_stb-STUFE = '4'.
format color 4 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 4 off.
elseif alv_stb-STUFE = '5'.
format color 5 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 5 off.
elseif alv_stb-STUFE = '6'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 6 off.
elseif alv_stb-STUFE = '7'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 7 off.
else.
format color 1 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 1 off.
endif.
endif.
hide: alv_stb.
clear : alv_stb.
clear v_flag.
endloop.
ENDFORM. " get_level_level
*& Form f4_for_variant
text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE -
Displaying Variables values with Text also in the selection screen of repor
hai
I have one InfoObject ZPLANT .When i try to excute the report then im getting only the Values of ZPLANT(not Text of those values) .Like below
ZPLANT :-
101 -
(im getting like this)
101 London Plant ( i want like this ,when i try to excute the report).
Please tell me how to do .
rizwanYes kamaljeet ,
When we press F4 , then we will gwt some values .
I want those values with description also ..
Pls tell me how can i get those F4 values with text in the selection screen of report .
i ll assing the points
rizwan -
Dialog Programming: Problem with Radio Buttons in a dialog screen.
Removed - Duplicate posting.
Edited by: miniSAP on May 14, 2009 9:05 AMHi,
go to se51 screen layou and select the four radio button and right click there is a option called assigned group name..
enter the group name..
from now onwards it allows you to select only one radio button at a time..
Regards,
Prabhudas -
Problem with Print button in the BI reports integrated in portal
Hi,
We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
Please help me in resolving this issue and points will be rewarded for sure
BalaSolved myself.
The answer lies in this link:
http://help.sap.com/saphelp_nw70/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
See the following two properties under Paging:
Columns Scrolled for Each Step (BLOCK_COLUMNS_STEP_SIZE)
Rows Scrolled for Each Step (BLOCK_ROWS_STEP_SIZE)
The values of these two properties have to be changed in the Web Template you are using for your BI Reports.
Regards,
Ankur -
Push button in the application tool bar in the standard LDB PNP
Hi ABAPERS,
I have a requirement that in the selction screen to use the standard LDB PNP beyond that I need to pass one push button in the selection screen 1000 ( in the application tool bar beside execute button) actually i passes the push button in the gui status but its not refelcting in the output and in the initilization event also i passed even then its noty working,
initialization.
move 'Cluster ID'(010) to sscrfields-functxt_01.
Thanks and Regards,
Deepthi.Pavan,
write code like this
TABLES: USR02, "Logon data
SSCRFIELDS. "FIELDS ON SELECTION SCREENS
STANDARD SELECTION SCREEN FOR SCROLLING LEFT AND RIGHT
SELECTION-SCREEN: FUNCTION KEY 1.
SELECTION-SCREEN begin of BLOCK b1.
PARAMETERs p1 type i.
SELECTION-SCREEN end of BLOCK b1.
INITIALIZATION.
SCREEN ICON LEFT AND RIGHT
SSCRFIELDS-FUNCTXT_01 = 'Button'.
start-OF-SELECTION.
Thanks
Bala Duvvuri -
Can the EXECUTE button on a selection screen suppressed?
Can we suppress the EXECUTE button on the selection screen?
Hi
The flowlogic Keyword at EXIT-COMMAND is a special addition to the MODULE statement in the Flow Logic .AT EXIT-COMMAND you can call a module before the system executes the automatic fields checks.
u2018SUPPRESS DIALOGu2019 command allows to perform screen processing u201Cin the backgroundu201D. Suppresing screens is useful when we are branching to list-mode from a transaction dialog step. -
Need to add push botton in my selection screen
Hi
I am doing a report program . I need to add PUSH BUTTON in my selection screen can u give me any code or suggestions for this.
IF i press this push button i should get the basic list.
Regards
Rasheed.Hi Here is a another example.
U can place a Push button on selection screen by using the satatement..
SELECTION-SCREEN PUSHBUTTON 2(10) butt USER-COMMAND cli3.
The push button will start from second character position on Selection screen and of length 10 characters !!
check this program...
TABLES sscrfields.
DATA flag(1) TYPE c.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE tit,
BEGIN OF LINE,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 12(10) text-020 USER-COMMAND cli2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) but3 USER-COMMAND cli3,
PUSHBUTTON 12(10) text-040 USER-COMMAND cli4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
MESSAGE i888(sabapdocu) WITH text-001 sscrfields-ucomm.
CASE sscrfields-ucomm.
WHEN 'CLI1'.
flag = '1'.
WHEN 'CLI2'.
flag = '2'.
WHEN 'CLI3'.
flag = '3'.
WHEN 'CLI4'.
flag = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
Reward me if its helpful.
Regards
Ravi -
Need a Tcode Similar to CJR2 with some restrctions in the selection scr
Hello Experts,
I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen.
CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS.
Thanks a lot in advance.
Regards,
Vasanth MHello Experts,
I have tried with the Transaction Variant. It works but I want to make display only for the version,Starting and closing period and Year. Other fields should be open for input(Cost Element and WBS element)
But the transaction variant is making DISPLAY ONLY for all the fields.
Please tell me a suggestion how I could achieve it.
Thanks a lot in advance.
Best Regards,
Vasanth M -
Need a Tcode Similar to CJR2 with some restrictions in the selection scr
Hello Experts,
I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen.
CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS.
Thanks a lot in advance.
Regards,
Vasanth MHello Experts,
I have tried with the Transaction Variant. It works but I want to make display only for the version,Starting and closing period and Year. Other fields should be open for input(Cost Element and WBS element)
But the transaction variant is making DISPLAY ONLY for all the fields.
Please tell me a suggestion how I could achieve it.
Thanks a lot in advance.
Best Regards,
Vasanth M -
Push button on the SAP Application toor bar
Hi,
i need to add a push button on the stanadard screen(me41,me42,me43).If click that button it will calls a custom screen.How it's possible to add a push button on sap std screen...
Thanks in advance.....
Avinash MHave you heard of GuiXT. Check it out.
http://www.synactive.net/site/index.htm
Regards,
Rich Heilman -
How to assign F1 help to the selection screen fields
Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha SinguruHi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
WHEN 'HELP'.
CASE CURSORFIELD.
WHEN 'S_MATNR-LOW'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
EXPORTING
TITEL = 'Information'
TEXTLINE1 = 'Information for field:'
TEXTLINE2 = 'S_MATNR-LOW'
START_COLUMN = 10
START_ROW = 15.
WHEN 'S_MTART-LOW'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
EXPORTING
TITEL = 'Information'
TEXTLINE1 = 'Information for field:'
TEXTLINE2 = 'S_MTART-LOW'
START_COLUMN = 10
START_ROW = 15.
ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter
Maybe you are looking for
-
User field in BAPI_ACC_DOCUMENT_POST
hai friends, I am using BAPI_ACC_DOCUMENT_POST for GL posting. The user wants to populate values in the custom field in BSEG Table, say BSEG-ZZFLAT1 through Bapi for posting. I populate the table EXTENSION1 in the BAPI. But it cannot update in the B
-
Per site, list driven footer and other content areas on a SharePoint 2010 master page?
So I worked with a vendor to provide a js, a powershell script and <div> content holders in a master page that would pull the content dynamically based on the site or subsite, and more specifically from a custom list in that site. To explain, if I ha
-
IPhoto won't start after upgrade
I just upgraded iPhoto, and when I try to start I get the "application unexpectedly quit" message before it ever opens. Any ideas?
-
Which one is the newer verison of MSI GP60?
There are two images of the MSI, which one is the new? Thnaks. 1. 2. 2nd one?
-
I need help