Problem with Report Query

I have tested the integration of Apex3.0 and BI Publisher via Report Query.
This works very well, however I want to create a hierarchical XML document via the following Query:
select a.id,
a.persoonsnr,
a.volgnr_dvb,
a.jaar,
a.naam,
a.code_sagitta,
a.status,
a.invgebruiker,
a.invdatum,
a.mutgebruiker,
a.mutdatum,
cursor (
select w.afspraken
from hri_opmwerkresult w) as owr
from hri_prsactiviteiten a
I get the error message ORA-00932 inconsistent datatypes expected number got curser
Is there a work around to create a report-query with master-detail info?

Anyone?

Similar Messages

Performance problem with report query

Hi,
I am encountering a performance issue with a page returning a report.
I have a page that has a region which joins 2 tables. One table has about 220,00 rows, while the other contains roughly 60,000 rows. In the region source of the report region, the query includes join condition with local variables. For example, the page is page 70, and some join conditions are:
and a.id=:P70_ID
and a.name like :P70_NAME
I run the query that returns a large number of rows from sqlplus, and it takes less than 30 sec to complete.
When I run the page, the report took about 3 minutes to return.
In this case, :P70_NAME is initialized to '%' on the page.
I then tried to substitute variable value directly in the query:
and a.id=1000
and a.name like '%'
this time the report returned in about 30 sec.
I then tried another thing which specified the region as "PL/SQL Function returning sql query", and modified the region as follows:
l_sql := '.......';
l_sql := l_sql || 'and a.id=' || v('P70_ID')
and similar substituting :P70_NAME to v('P70_NAME') and append its value to the l_sql string.
The report query page also returned in 30 sec.
Is there any known performance issue with using the bind variable (:PXX_XXX) in the report region?

If you are able.. flush the shared_pool, run your
report then query the v$sql_area or v$sql_text tables.
Or do a google query and look up Cary Milsap's piece on enabling extended trace .. there is your sure fire way of finding the problem sql. I am still learning htmldb but is there a way to alter session enable trace in some pre-query block?

Reporting designer - problem with insertin query

hi, I have problem with inserting query into reporting designer, when i do it there occurs metadata error and the system write check query, but query is ok, there are no variables. Have you any idea whats the problem.
thanx

I had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob

Problem with jump query

Hello ,
iam having problem with jump query when i execute the web report but the same jump query is working fine in Bex analyzer.i think there are some settings need to be done in SAP WAS for web report. if it so can anybody tell me how to maintain these settings so that i can execute the my web report.
Regards
Komal

Hi Komal,
What is the problem you are facing while executing the report.
Are you working on WAD? Explain clearly about your problem you are facing.
Regards,
KK.

Problem with a query with a BLOB data type

Hi i've a problem with this query in 11g. R1
SELECT
      LOGTIMESTAMP,
      LOGTIMEMILLIS,
      MSGID,
      XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
    vordel.AUDIT_MESSAGE_PAYLOAD,
    vordel.AUDIT_LOG_POINTS
WHERE
    AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
    LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
     and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
   sys_connect_by_path (p1.fname, '/') "PATH",
   p1.fname,
   p1.id,
   level,
   (select count (id) - 1
    from
       (select connect_by_root p2.lname lname, p2.id
        from cmt_person p2
        start with p2.id = p1.id
        connect by prior p2.id = p2.manager_id)
    ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Problem with af:query

Hi,
I have a problem with af:query. Here's what I do:
1. create a VO, define view criteria
2. drag and drop view criteria from data controls to an empty form, choosing query and table
3. When I run the page and click any of the buttons, I get: "Because of inactivity, your session has timed out and is no longer active...."
I see no exceptions in output window. What am I doing wrong?
Here is my view defenition:
<?xml version="1.0" encoding="windows-1250" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="EmployeesView"
Version="11.1.1.49.49"
SelectList="Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID"
FromList="EMPLOYEES Employees"
BindingStyle="OracleName"
CustomQuery="false"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
</DesignTime>
<Variable
Name="firstName"
Kind="viewcriteria"
Type="java.lang.String"
DefaultValue="0"/>
<EntityUsage
Name="Employees"
Entity="project3.Employees"
JoinType="INNER JOIN"/>
<ViewAttribute
Name="EmployeeId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="EmployeeId"
EntityUsage="Employees"
AliasName="EMPLOYEE_ID"/>
<ViewAttribute
Name="FirstName"
PrecisionRule="true"
EntityAttrName="FirstName"
EntityUsage="Employees"
AliasName="FIRST_NAME"/>
<ViewAttribute
Name="LastName"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="LastName"
EntityUsage="Employees"
AliasName="LAST_NAME"/>
<ViewAttribute
Name="Email"
IsUnique="true"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="Email"
EntityUsage="Employees"
AliasName="EMAIL"/>
<ViewAttribute
Name="PhoneNumber"
PrecisionRule="true"
EntityAttrName="PhoneNumber"
EntityUsage="Employees"
AliasName="PHONE_NUMBER"/>
<ViewAttribute
Name="HireDate"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="HireDate"
EntityUsage="Employees"
AliasName="HIRE_DATE"/>
<ViewAttribute
Name="JobId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="JobId"
EntityUsage="Employees"
AliasName="JOB_ID"/>
<ViewAttribute
Name="Salary"
PrecisionRule="true"
EntityAttrName="Salary"
EntityUsage="Employees"
AliasName="SALARY"/>
<ViewAttribute
Name="CommissionPct"
PrecisionRule="true"
EntityAttrName="CommissionPct"
EntityUsage="Employees"
AliasName="COMMISSION_PCT"/>
<ViewAttribute
Name="ManagerId"
PrecisionRule="true"
EntityAttrName="ManagerId"
EntityUsage="Employees"
AliasName="MANAGER_ID"/>
<ViewAttribute
Name="DepartmentId"
PrecisionRule="true"
EntityAttrName="DepartmentId"
EntityUsage="Employees"
AliasName="DEPARTMENT_ID"/>
<ViewCriteria
Name="EmployeesViewCriteria"
ViewObjectName="project3.EmployeesView"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="mode"
Value="Basic"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow24"
UpperColumns="1">
<ViewCriteriaItem
Name="FirstName"
ViewAttribute="FirstName"
Operator="STARTSWITH"
Conjunction="AND"
UpperColumns="0"
Required="Optional">
<ViewCriteriaItemValue
Name="EmployeesViewCriteria_vcrow24_EmployeeId_vcval0"
Value=":firstName"
IsBindVarValue="true"/>
</ViewCriteriaItem>
</ViewCriteriaRow>
</ViewCriteria>
<ViewLinkAccessor
Name="EmployeesView"
ViewLink="project3.EmpManagerFkLink"
Type="oracle.jbo.RowIterator"
IsUpdateable="false"/>
</ViewObject>
And JSF page:
<af:panelGroupLayout layout="vertical">
<af:panelHeader text="Employees">
<af:query id="employeesViewCriteriaQueryId" headerText="Search"
disclosed="true"
resultComponentId="employeesViewCriteriaQueryResultId"
value="#{bindings.EmployeesViewCriteriaQuery.queryDescriptor}"
model="#{bindings.EmployeesViewCriteriaQuery.queryModel}"
queryListener="#{bindings.EmployeesViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.EmployeesViewCriteriaQuery.processQueryOperation}"/>
</af:panelHeader>
<af:table value="#{bindings.EmployeesView1.collectionModel}" var="row"
rows="#{bindings.EmployeesView1.rangeSize}"
emptyText="#{bindings.EmployeesView1.viewable ? 'No rows yet.' : 'Access Denied.'}"
fetchSize="#{bindings.EmployeesView1.rangeSize}"
id="employeesViewCriteriaQueryResultId">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}">
<af:outputText value="#{row.EmployeeId}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.FirstName.label}">
<af:outputText value="#{row.FirstName}"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.LastName.label}">
<af:outputText value="#{row.LastName}"/>
</af:column>
</af:table>
</af:panelGroupLayout>
Regards
Jernej
Message was edited by:
Jernej Kase

It also seems that quick queries don't work with SQL92 sqlBuilder.
I get the following error:
Messages for this page are listed below.
Error
SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE (( ( ( UPPER(Employees.FIRST_NAME) LIKE UPPER(:vc_temp_1) ) OR ( ? IS NULL ) ) ) )
Error
Missing IN or OUT parameter at index:: 2
Is this a bug or this doesn't work by design?
Edit: and if I create named query I get the following error:
Caused by: oracle.jbo.NoDefException: JBO-25058: Definition fn of type Attribute not found in EmployeesView1
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:5634)
     at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.getQuickSearchVC(JUSearchBindingCustomizer.java:847)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
     ... 47 more
I think just ran out of options...
Message was edited by:
Jernej Kase

Problem with update-query

Hallo,
i have a problem with following query. I wanna update the columns in the nutzung table. There are 7 columns but my query updates the geometry that in all columns is the same geometry or I can not update because the query gives more than 1 row in the subquery.
update nutzung
set geometrie=(SELECT F1840_GEOM FROM UG_F1840_GEOM,Nutzung WHERE NUTZUNG.OBJNR=UG_F1840_GEOM.F1840_OBJNR AND GETFEATUREID(UG_F1840_GEOM.F1840_FID) IN(SELECT MSLINK FROM FEATURE WHERE FCODE like '%0000'));
Maybe I need the ug_f1840_geom table in the update query. Don't know how to change the query.
Regards, Katrin

hi it's me again .I am getting error for this
statement
if(numOfUsers>0)
stmt.executeUpdate("update defaultchatrooms set
s set nodename =
'"+chatTopic+"'('"+numOfUsers+"')'");
1. Your update string looks like this:
update defaultchatrooms set nodename = 'someChatTopic'('0')'
Does that look right to you?
2. This will update the column nodename in every row in the table defaultchatrooms. Aren't you missing a "where" condition?

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Problem with the query of Sharepoint Calculated Fields

Hello,
I am developing an application in sharepoint 2013 foundation. but i have problems with a list, when executing a caml query on a calculated field. I try the solution of this blog
http://sptalks.wordpress.com/2013/03/25/query-on-calculated-field-problem
but i got no result
attentive to any comments
thanks

Hello,
This is my CAML Query
<View>
<ViewFields>
<FieldRef Name="ID" />
<FieldRef Name="PermMask" />
<FieldRef Name="FSObjType" />
<FieldRef Name="Nombre" AutoHyperLink="TRUE" />
<FieldRef Name="Apellidos" AutoHyperLink="TRUE" />
<FieldRef Name="Cargo" /><FieldRef Name="Edad" />
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Created" />
</ViewFields>
<Query>
<GroupBy Collapse="TRUE" GroupLimit="30">
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Edad" />
</GroupBy>
<OrderBy>
<FieldRef Name="ID" />
</OrderBy>
<Where>
<Contains>
<FieldRef Name="Ano" LookupId="FALSE" />
<Value Type="Text">2014</Value>
</Contains>
</Where>
</Query>
</View>

VAT declaration in XML - Problem with report RFASLDPC

Hello all,
I have a problem with the report RFASLDPC. We use it to download an XML file that we generated which contains the VAT declaration.
In the report RFASDLPC, there is a FORM named QUELLFILE_PRUEFEN which stop the report and display a message : "Data file FILE_NAME is not correct".
The reason is that QUELLFILE_PRUEFEN checks (for Belgium) that the beginning of my document starts with '000000' (six times zero). But this is impossible for an XML file to begin with '000000'. An XML file must begin with "<?xml version="1.0" ?>" or a least "<".
Here is the code :
FORM QUELLFILE_PRUEFEN.
OPEN DATASET PAR_PATH FOR INPUT IN BINARY MODE.
IF SY-SUBRC NE 0.
    MESSAGE E306 WITH PAR_PATH.        ''Quellfile nicht vorhanden
ENDIF.
READ DATASET PAR_PATH INTO HLP_RECORD.
CASE PAR_FTYP.
    WHEN 'AT'.                         ''ASL Österreich
      IF HLP_RECORD(1) NE 'I' OR HLP_RECORD+46(2) NE 'ZM'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'ES'.                         ''ASL Spanien
*     IF HLP_RECORD(1) NE '1' OR HLP_RECORD+104(3) NE '349'.
      IF HLP_RECORD(1) NE '1' OR HLP_RECORD+1(3) NE '349'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    when 'FI'.
      if hlp_record(3) ne '000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
ENDCASE.
CLOSE DATASET PAR_PATH.
The line :
READ DATASET PAR_PATH INTO HLP_RECORD.
Put the 128 first character of the XML file in HLP_RECORD because HLP_RECORD is defined as :
HLP_RECORD(128) TYPE C
So as I work in Belgium, it is the condition :
WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
which is checked. But this condition cleary check if the beginning of the XML is '000000' and if it is not, it stop the program.
I searched for all the SAP notes about RFASLDPC but I found none about this problem.
Did someone else have also this problem ? Did you find a way to solve this ?
Thank you in advance for your help.
Best Regards.
Gregory Pierre.

anyone has an idea ? ...

Problem with Report Query

Similar Messages

Maybe you are looking for