Problem with ringing

Hello, I have a serious problem with my Lenovo S860, 1,3GHz, 1GB Ram. I think I have deleted system files during deleting unusued apps. When someone is calling me the phone is ringing but is staying in switched off mode (with black screen and no information who is calling) In that case I have to turn switch on/off button to reject the call and later see who had called me. I hope you could help me. Today I made factory reset but the problem is staiyng.

Hi
You should reinstall the OS.Suggest you flash THIS version.
The link contains a PDF with instructions.Please take your time and read it.
Pay special attention to the SP drivers> See message 7 of http://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747#M3660 (the topic is about the S650 but the driver installation process is the same for all Lenovo MTK powered phones)
The S860 has a non removable battery>suggest to let it completely discharge.
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Am I the only one having problems with ringer volume since the update?

Am I the only one having problems with ringer volume since the update?? I'm hard of hearing and before updating to IOS7 I could hear my alarm and ringer just fine. Volume is turned up all the way and I've chosen the loudest sounds I could and still having a difficult time hearing.

Annie Hall is available on DVD only.
It is not available for streaming and I believe movies available for streaming are the only movies available with the Netflix app on an iOS device.

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

I have Problem with ringer of my iphone 5S it is not working properly?

The ringer Of iphone 5S is not working properly, it sometimes misses the ring & play some annoying tunes Plz help me out...!

I checked my headphones with my ipad and my macbook aswell, the problem exists in the headphones with all these devices as well. So how do i claim warranty, should i approach AT&T store or Apple Store

Problem with ringer after upgrading to ios 6

I recently upgraded my iphone 4 to ios 6 and immediately the ringer on the phone will not work. I have tried a hard reboot , a restore and investigated all of the sound settings but still nothing works. The speakers work fine ,playing music etc but the ringer when receiving calls ( also the side volumn buttons ) have stopped working . Also the sound in the new maps feature is not working or in many of the apps that are installed.
I have swapped the speakers and even changed the volumn button cable but still nothing . Please help.

I recently upgraded my iphone 4 to ios 6 and immediately the ringer on the phone will not work. I have tried a hard reboot , a restore and investigated all of the sound settings but still nothing works. The speakers work fine ,playing music etc but the ringer when receiving calls ( also the side volumn buttons ) have stopped working . Also the sound in the new maps feature is not working or in many of the apps that are installed.
I have swapped the speakers and even changed the volumn button cable but still nothing . Please help.

Problem with phone line not ringing

Hi, I have a problem with my landline, it appears to ring out but isnt, no one can ring me as it says Im busy and bt cant check my line because it says Im busy..
My phoneline died in my bedroom ages ago, so now rely on the main socket only..
Can you pls advise me on what to do?
Im disabled, so cannot plug and unplug but my daughter or grandson will be up later this afternoon if that needs to be done..
Many thanks Ann

Please ask them to follow the instructions on this site http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
If they think the fault is outside of your house, then they can report the fault here.
https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

I have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

Hi pystyke,
Welcome to Apple Support Communities.
You may find these links helpful with troubleshooting the audio issue you're experiencing:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy

It's happened again! Problem with replacement screen (mysterious dark O ring in the centre)

I had my screen replaced for a dark O ring appearing in the centre about half a year ago. It must be caused by the apple logo on the reverse.
It's now starting to happen again and my 3 year applecare has run out
What can I do? Does a new screen come with a guarantee of any kind?
Serial is W89471B364B

Welcome to the forum!
This has been a fairly common problem with Z series units, and the cure is LCD replacement.
Brand new LCDs change hands for under $200 on eBay. If you are handy and careful enough, replacing the LCD isn't that much of a problem.
Hope this helps and good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Problem with TypeDef and Ring constants

Hi folks!
I've got a problem with my Ring-TypeDef.
I defined a ring control as a Strict TypeDef, hoping that all constants of this Ring will be updated when I change the definition as it does with Enums.
This does not work. Changes of the TypeDef take effect on the Ring control but not on the constants.
Has anyone an idea how to fix or workaround this?
TIA
Kevin.

Mark, as I understand it the idea with ring control/constants is that you can make pairs like the ones described:
yes: 1
no: 99
cancel: -1
but when you create a ring constant say, this feature is turned off, it behaves like a enum. In order to use this non continous numbering you need to uncheck "Sequential values" in propeties/Edit items. This took me some time to find the first time, and today I again looked a good half hour for it again!
Hope this was what you were asking.
Ola

HT201401 Problem with my iPhone 4S volume, my phone will vibrate but won't ring...

I Have a problem with my iPhone 4S volume, my phone will vibrate but won't ring. IS IT EASILY REPAIRABLE?

if it play when you connect a headset
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

TS2755 I am having a problem with getting notified when I receive a call or a text. My phone will not ring or vibrate.

I am having a problem with getting notified when I receive a call or a text.

Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari

Problem with Iphone 5 ring/sound.

I have a new iphone 5 and have problems with volume. First, when someone calls me, sent a msg or a simple notification, i can't hear anything. I checked everything ...the settings and all but I can't hear anything unless I use a headset. well, i"m not deaf for sure. It was working for a copule of weeks and now it's not. My last resort is to complain to the dealer and aks them to change it. Does anyone have any idea on what I suppose to do?

Is your mute switch on?, the top left on the phone, if it shows orange its on mute.

Voice problems with Lync 2013 Mobile

Hi
I have a situation where Lync 2013 on both iPhone & Android has started giving problems with making and receiving voice calls. There are no problems with Windows, Mac or Phone Edition clients that I'm aware of. I have not tested anything over the VPN,
but this should not be a factor.
For receiving calls - If the user is connected to the LAN via Wi-Fi AND the call is from an internal user, all works fine. If the call is from an external user OR the user is connected via 3G, then the call just shows "Connecting" indefinitely.
This includes transferred calls.
For making calls - If the user is connected to the LAN via Wi-FI and calls either an internal or external users, all works fine. If the user is connected via 3G and calls either an internal or external user, the phone rings, but when it's answered it shows
call ended.
I have ran RUCT on a computer outside the network, with the following findings:
DNS:
Record
Type
Hostname
IP Address
Port
Weight
Priority
_sip._tls.domain.com
SRV
sip.domain.com
Edge External IP
443
100
0
sip.domain.com
A
sip.domain.com
Edge External IP
sipexternal.domain.com
A
sipexternal.domain.com
Edge External IP
meet.domain.com
A
meet.domain.com
<null>
_ntp._udp.domain.com
SRV
pool.ntp.org
NTP Server IP
123
100
0
_sipfederationtls._tcp.domain.com
SRV
sip.domain.com
Edge External IP
5061
100
0
lyncdiscover.domain.com
A
sip.domain.com
Edge External IP
lyncdiscover.domain.com
CNAME
sip.domain.com
I have ran Test Port on each entry where there is a port with successful results. Ping works on all entries.
If I query Certificate Information on sip.domain.com with port 5061 or 444, it succeeds and returns the certificate with subject sip.domain.com. If I query 443, it fails with error "An error occurred while retrieving the certificate. Unable to read
data from the transport connection: An existing connection was forcibly closed by the remote host."
On Microsoft Remote Connectivity Analyzer, all tests pass except for the certificate test:
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server sip.domain.com on port 443
The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
Running netstat on Lync Edge gives me the following with regards to port 443:
TCP <Internal IP>:443 Lync2:0 LISTENING
TCP <External IP>:443 Lync2:0 LISTENING
Firewall allows connections on port 443 and I've tried disabling the firewall as well. Trying to open https://sip.domain.com in the browser on the Lync Edge fails also, telnet succeeds, but no data is returned.
I've restarted the AV service and also rebooted the Lync Edge server, no change. In the topology builder, I can see that AV is configured to listen on port 443.
Any ideas would be most welcome.
Regards
Lionel
MCP Windows Server MCTS .NET

I have ran a large amount of additional tests. On my latest round of testing, I have obtained the following results:
Call received via PSTN gateway on user DID, answered by desktop client inside LAN - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN - works.
Call received via PSTN gateway on user DID, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call made through PSTN gateway from desktop client inside LAN - works.
Call made through PSTN gateway from desktop client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client inside LAN - does not work.
Call made through PSTN gateway from mobile client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client outside LAN (3G) - does not work.
Call from desktop client inside LAN to desktop or mobile client (regardless of location) - works.
Call from desktop or mobile client (regardless of location) to desktop client inside LAN - works.
Call from desktop or mobile client (regardless of location) to desktop or mobile client (regardless of location) - works.
There is no difference in behaviour between normal calls and conference calls. Reproducing the problem seems to require the following:
1. PSTN gateway needs to be involved
2. One party needs to be on mobile client
3. The mobile client needs to be inside the LAN or on a 3G connection, but not behind NAT on a DSL connection
The only conclusion I can make is that somehow NAT makes the problem go away, but it does not affect desktop clients (on the LAN or Wi-Fi at least, I do not have a way to test them on 3G).
The PSTN gateway (Cisco UCM) could also be the problem, but it works fine in all other cases. It has 4 trunks and makes all kinds of routing decisions, but once a call is routed to/from Lync, it should not make a difference on what type of device it is answered.
I'm really baffled by this one. Perhaps the 3G thing is a service provider issue and the issue on the LAN has something to do with the internal DNS combined with the behaviour of the mobile client. Just not sure exactly what.
MCP Windows Server MCTS .NET

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Problem with ringing

Similar Messages

Maybe you are looking for