Problem with scanning CM1312 on MAC Yosemite

hi,
Im not able to perform scanning on my Mac with Yosemite and CM1312 connected to wireless router.
Printing works fine but scanning is not possible.
When i press scan button on my printer it shows that there is no destination added and check the user manual
for instructions which i cannot find there.
thanks for help

Hi,
I afraid that scanning is no longer supported on Yosemite, the latest full feature software was available for Lion (10.7) and that is not likely to wiork on Yosemite as expected.
You may follow this list from apple as a reference, only printing and faxing is supported for the HP Color LaserJet CM1312 MFP Series:
http://support.apple.com/en-us/HT3669#HP
Although it is not officially supported, 3rd party software such as VueScan may allow you scanning from Mac OS X 10.10:
http://www.hamrick.com/vuescan/hp_laserjet_cm1312.html
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Why won't some of my numbers spreadsheets from my iPad open with iCloud on my Mac (Yosemite)?

Why won't some of my numbers spreadsheets from my iPad open with iCloud on my Mac (Yosemite)? When I look at the files in FiNader there's a grey bar next to the files that won't open.

I am having the same problem. Created new spreadsheet on iPad with fresh iOS and Numbers installs (3/2015) and am unable to open this spreadsheet in iCloud in Safari on MacBook Air (all current). I get the following message:
"Sorry, something went wrong.
This spreadsheet can't be opened right now. Please try again later."
Tried reopening on Mac from iCloud and resaving; still cannot open.
Quick fix: Copying the spreadsheet content from the iPad spreadsheet to one created on the desktop recovers the ability to open it in iCloud in Safari.
Thanks.

Problem with scanning - printer display shows "Server connection error"

My printer has been working great and I have had no problems with scanning. But two days ago, all of a succen I rec'd message "server connection error". I tried to send to email as well as computer. Got the same message. As usual, I don't recall any action on my part that could have caused this problem. The copying and printing functions work fine. Detailed advice to someone technically challenged will be much appreciated. Thank you.

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem with scanning document in PDF format to computer

has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525 e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
This question was solved.
View Solution.

Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with photoshop on my mac

Hey...
I have some problem with photoshop on my mac...
When i open the photoshop my screen change his color...
The screen changes such delicate blue color.
and when i close the app the color has back to the original color.
photoshop cs 6 (master collection)
macbook pro 15"
OS X Mountain Lion
2.3 i7
4 giga ram
Have a nice day

Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
You can turn that off in photoshop cs6 under Window>Application Frame.
If that's not it, could you post a screenshot?

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Sudden printing problems with scanned pdf documents

Hi, I suddenly experience problems when I want to print scanned pdf documents.
Since 2 years, I am using an iMac with a Fujitsu ScanSnap S1500M and a Samsung ML-2525W. I also use Acrobat Pro 9.0 provided with the scanner. I scan documents, save them as pdfs and print them. Worked fine until just recently. If I print scanned pdf documents, the printer give white pages. Other pdf documents get printed without problems.
I use OS X Yosemite (10.10.1) and ScanSnap Manager 3.2.L63.
Any advice is highly appreciated

Hi Roger - the problem was going from 10.6.7 to 10.6.8. That is when all of the printing problems began, as well as the wifi getting flaky. I was able to get the iMac speaking politely to the printer by installing Repair 10.6.8 and re-adding the Canon printer (see below):
Printer “failure”
Probably the single most common 10.6.8 problem, at least as evidenced by a massive 17 page thread in Apple Support Communities, is a failure to print. The typical symptom is that the printer driver software pauses, displaying a message that states something like: “printer-state-message="/usr/libexec/cups/backend/lpd failed" or “/usr/libexec/cups/backend/dnssd failed.” Not all printers have this problem, but users report seeing the symptom in a variety of different printers.
As is often the case with update-related problems, reinstalling 10.6.8 from the combo updater may eradicate the symptom. Another possible solution is modifying a printer file in the /etc/cups/ppd directory (as detailed in the above-linked thread).
Unfortunately, none of these solutions are guaranteed to work. What does reliably fix the problem is to downgrade back to 10.6.7. If you’d rather stick with 10.6.8, you can instead downgrade just the quartet of printer-related files that appear to be the root cause of the symptom. These are the socket, dnssd, lpd and ipp files, located in the /usr/libexec/cups/backend directory.
A Mac user wrote an application, Repair10.6.8 (direct download link), that automatically downgrades these four files for you. Several users report success with this program. After running the Repair app, you may also need to “reset printing system” by selecting the command from the contextual menu for the printer name in the Print & Fax System Preferences pane.
from MacUser 10.6.8. workaround articlehttp://www.macworld.com/article/160993/2011/07/1068_bugs.html#lsrc.nl_mwweek_t_c bstories

Problem with permissions when upgrading to Yosemite...

I have twice tried to upgrade to Yosemite with the same results each time. Once the installation completes and it goes through the final reboot to start the system, immediately upon start-up, it shows a dialogue box that says something along the lines of, "Yosemite needs to repair your Library." I do authorize it to do a repair, but it seems nothing actually happens.
Yet another problem is also immediately evident at startup, and that is that several of my folders are irrevocably locked..."I don't have permission." This includes folders in my User Library, a folder on my Desktop which is vital to my work, and the Downloads folder. If I try to go to the Get Info area to unlock it, in the Permissions area it says "Fetching", to see who has permissions, but it never stops Fetching. And if I click on the "+" to add a user permission, it hangs and necessitates a hard restart.
Also, when opening Safari, it can't find Safari's keychain or can't access it, and it asks me to reset to default settings.
I'm thinking this all has to do with a bug in the Permissions, but I don't know where the bug is or how to address it. I have gone back to Mavericks twice now, and I don't see any problems with the permissions on the Downloads file, for instance. Also, it seems entirely random as to which files are locked and which aren't, which adds to the confusion.
Any help would be appreciated.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Problem with scanning CM1312 on MAC Yosemite

Similar Messages

Maybe you are looking for