Problem with scriplet variable as tag attribute

          This question was already treated here but it doesn't help me.
          I have a .jsp page where I am using a custom tag written by me like this :
          <%! String thecategory= request.getParameter("category");%>
          <gamemarket:listpost category="<%= thecategory %>">
          </gamemarket:listpost>
          Even with no white spaces after %>, it doesn't work .
          WEB logic JSP compiler always keep generating the error message :
          "unclosed string literal". .
          Please help. Its very urgent.

What version of WLS are you using?
          "chris" <[email protected]> wrote in message
          news:3c7b75b0$[email protected]..
          >
          >
          > This question was already treated here but it doesn't help me.
          >
          > I have a .jsp page where I am using a custom tag written by me like this
          >
          > <%! String thecategory= request.getParameter("category");%>
          > <gamemarket:listpost category="<%= thecategory %>">
          > </gamemarket:listpost>
          >
          > Even with no white spaces after %>, it doesn't work .
          >
          >
          > WEB logic JSP compiler always keep generating the error message :
          > "unclosed string literal". .
          >
          > Please help. Its very urgent.

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problem with JavaScript code in Page Attributes, modal popup...

Hello all!
I'm encountering a problem with a modal popup I wrote in JavaScript.
h3.
The situation*
A user sees an interactive report with rows that are clickable, so these rows are links. Upon clicking the name of something in a row, some items get a certain value and a modal popup shows on the screen. In this modal popup, there are details regarding that particular row the user has clicked, but the problem_ here is...
The modal popup closes itself only seconds after it has been opened.
This must be because I've probably made a mistake somewhere in my code, but I just can't figure out where... It also appears that when I click on a row link, the popup shows, but the progress bar of my toolbar seems to show a loading bar (as if I refreshed the page).
h3.
My code*
This code is located in the _"Function and Global Variable Declaration"_ part, under the _"JavaScript"_ tab. Code is in the _"Page Attributes"_ of my page 24.
function showhide(x){
$x('REGION1').style.display = ( x == 'REGION1') ? 'block' : 'none';
$x('REGION2').style.display = ( x == 'REGION2') ? 'block' : 'none';
$x('REGION3').style.display = ( x == 'REGION3') ? 'block' : 'none';
$( function(){
$('#ModalForm').dialog(
     modal: true,
     autoOpen: false,
     width: 500,
     height: 350,
     buttons:{ Close: function(){closeForm();}
function openForm()
    $('#ModalForm').dialog('open');
function closeForm()
    $('#ModalForm').dialog('close');
    $(document).ready(function() {
        $('a.temppop').click(function() {
            openForm();
    });This code is located in the _"Header Text"_ part, under the _"Header"_ tab. Code is in the _"Page Attributes"_ of my page 24.
<link rel="stylesheet" href = "http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/base/jquery-ui.css" type="text/css" />
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.js"> </script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.js"> </script>This code is located in the _"Column Link"_ part, you get there by going to the _"Report Attributes"_ of the region called _"Template overview"_ on page 24. This region is an interactive report.
Link Text: #FOODTEMPLATENAME#
Link Attributes: class="temppop"
Target: Page in this Application
Page: 24
Item 1, name: P24_MEALID; item 1, value: #MEALTYPEID#
Item 2, name: P24_TEMPLATEID; item 2, value: #FOODTEMPLATEID#So basically I call the function to open the modal popup by the class name. When a link with that class name in it is clicked, it opens the popup.
To remind you of the problem, the modal popup closes seconds after it has been opened. How do I fix this?
Thanks in advance.
(APEX version 4.1.1.00.23)

Come on guys... I really need to know this. :(

Using scriplets in jsp-tag attribute

I have a strange problem with a custom taglibrary that I'm trying to write.
When I use the tag in a jsp like underneath the first outputs the right value (Welcome Hans), but the output of the second time shows: Welcome <%= test %>
This is a part of the JSP:
<% String test = "Hans"; %>
<arto:hello name="Hans" />
<arto:hello name="<%= test %>" />
I realy don't know how to let the tag display the value of the string in my jsp.
Can anyone give me some advice?
Thanks,
Hans
The files are:
import java.io.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
public class HelloTag extends TagSupport {
private String name;
public void setName(String name) {
this.name = name;
public int doStartTag() throws JspException {
try {
pageContext.getOut().print("Welcome " +name);
} catch (IOException ioe) {
throw new JspException("Error: IOException while writing to client");
return SKIP_BODY;
public int doEndTag() throws JspException {
return SKIP_PAGE;
The JSP:
<%@ taglib uri="arto" prefix="arto" %>
<%
String test = "Hans";
%>
<arto:hello name="<%= test %>" />
<arto:hello name="Hans" />
The TLD:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN"
"http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
<taglib>
<tlibversion>1.0</tlibversion>
<jspversion>1.1</jspversion>
<shortname></shortname>
<uri></uri>
<info></info>
<tag>
<name>hello</name>
<tagclass>HelloTag</tagclass>
<bodycontent>empty</bodycontent>
<info>Tag with Parameter</info>
<attribute>
<name>name</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
</taglib>

In the tld for the name attribute, use
<rtexprvalue>true</rtexprvalue>
This specifies that the attribute value can be a run-time expression. Otherwise, the value is taken as a literal.

Problem with Lookout 6.5 tag sharing

This is a WHOPPER, although a weird one...
I have one grad student grabing shared variables from my Lookout server processes for inclusion in his LabVIEW implementation.
After I upgraded the server's Lookout to 6.5, he reported problems reading values from one of the four processes running on my server.
1. Oddly enough, he had no problem displaying the tags in Max or in Activex Hypertrend within his LabVIEW executable, but he could not map the variables to his shared variables and thus he could not display them or include them in his Citadel.
2. Using Tag Monitor, all the values from the "troubled" process on my Lookout server, come up as "access denied".
3. Using Tag Monitor on the Lookout server (while all four processes were running in Lookout), I had the same results...."access denied".
4. All Lookout clients (both 6.5 and 6.2) have no problems accessing the troubled process tags both by expression and Lookout Hypertrend.
The troubled process, has the last alphabetical process name and the last alphabetical file name. All four processes are loaded using the startup settings in Lookout.ini. Lookout runs as a service on WIndows 2008 x86 Hyper-V virtual machine.
Because the processes are all production, I have not yet been able to mess with process names and loading order to possibly elaborate on the symptom.
It is "maybe" and issue that Lookout 6.5 can't properly share out (via shared variable engine) variables from more than 3 processes at a time???
Please advise ASAP.
Ed

The access denied error is more like a security issue. In Lookout Object Explorer, right click on process, and select Configure Network Security. If I give Everyone "No Access", or I just remove any permissions, I will get the access denied error in Tag Monitor.
Actually Lookout has no limitation on the number of exported processes or tags. All the tags in each process are the tags in Logos Server. The LabVIEW access these tags by Logos protocol. If Lookout set the security, and the LabVIEW doesn't have enough access level, it will get access denied error. For example, lookout gives no access to the process.
You can configure the Network Security for process, as well as any objects. By default, Everyone has Read&Write permission.
Ryan Shi
National Instruments

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with track order (ID3 tags) when transfering from ZENcast Organizer = Vision:M 3

Hi there, I am using ZENcast Organizer V.2.00.4 and my Zen Vision:M's firmware version is V..6.0e
Okay, I have a time consuming problem with the way my podcasts are organized on my player. When i download my podcast from ZENcast Organizer everything is neatly organized. By that i mean that the tracks are positioned in the order in which they were released by the radioshow. Let me just give you a picture : [IMG]ttp://img530.imageshack.us/img530/4476/zencastbv4.jpg[/IMG]you can see that after the 27th comes the 28th and the 29th etc. That is also the way i would want the files to be played on my player, but unfortunately they are not.
Here is a pic of what the order looks like on my player after i have transfered some of the podcasts . Since there are no ID3 tags concerning track number, the player seems to sort the files alphabetically, which is a hassle for me as i have to search through my tracks each time I would like to listen to the following show.
The way that I have dealt with it until now is to download the tracks with ZENcast Organizer and then add the track number information with Media Monkey and then upload them to the player via Zencast Organizer. That is a lengthy and annoying process and since i have missed the show (due to my new work) for 4 month now, i have a lot of files that i must edit.
So I was just wondering if there is an easier method? I was thinking in the lines of a plugin for ZENcast Organizer that would add track number information? I wouldn't care if it numbers them 2 3 4 or 2 22 23 24 just as long as they come in the chronologically right order when i play them.

I did some testing and discovered that ZENcast Organizer indeed does know how to sort the files on my player so that they are played in the right order - under the transfer you just have to check the box which makes ZENcast Organizer convert the music (mp3) files into videofiles as shown in the picture: http://img50.imageshack.us/img50/439...ransferar5.jpg
This makes my player play them in the right order as shown here:
But i do not want player to be spending a huge amount of unnecessary power on showing a screen I am not going to be looking at.... my podcast is a radio show, there is nothing to LOOK at, literally.
Why on earth does ZENcast not change the filename when i choose to download the shows in their nati've mp3 form but only when I convert them to video?

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

Problem with substitution variable

Hi All,
I am facing problem with usage of substitutiion variable. I have following code in my script
Edited by: Tarak on Mar 4, 2009 3:27 AM

sorry I missed the script.
create table tempdata
(description varchar2(200))
TABLESPACE &tspacename
/Sqlplus is not asking for the value of tspacename.I am getting following error.
TABLESPACE &tspacename
ERROR at line 3:
ORA-02216: tablespace name expectedI am not sure what is wrong with SQLPLUS setting.Can anybody help?

Problem with Persistent Object as Reference Attribute of Persistent Object

Hello All,
I have a problem with a persistent class that contains a reference attribute to another persistent class. I can write the reference object attribute to the DB but when I read the reference attribute back from the DB the object is null. Allow me to explain...
I have two tables; one is a data table with one key field of type OS_GUID, the second is a mapping table with several business key fields and two further fields; an instance GUID and a class identifier GUID. The data table is used to contain all the data for an object. The mapping table is used to hold a relationship between the GUID assigned in the data table and the business key. The mapping table has been structured in this way by following the help here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/df/e785a9e87111d4b2eb0050dadfb92b/frameset.htm
and the field mapping in persistent class for the mapping table has been mapped following the help here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/06/f23c33638d11d4966d00a0c94260a5/frameset.htm
The code I use to create entries in the data and mapping table is:
<-snip->
DATA:
    gv_blank_data_guid TYPE REF TO zcl_ps_data,
    gv_data_guid       TYPE        os_guid,
    go_data_ps         TYPE REF TO zcl_ps_data,
    go_data_agent      TYPE REF TO zca_ps_data,
    go_data_map_ps     TYPE REF TO zcl_ps_data_map,
    go_data_map_agent TYPE REF TO zca_ps_data_map,
    go_exc             TYPE REF TO cx_root.
go_data_agent = zca_ps_data=>agent.
go_data_map_agent = zca_ps_data_map=>agent.
TRY.
Check if there's already data with the business key on the DB
      go_data_map_ps = go_data_map_agent->get_persistent(
                         i_data_ref     = iv_data_ref
                         i_action       = iv_action ).
... if there is then exit.
      EXIT.
    CATCH cx_root INTO go_exc.
ENDTRY.
TRY.
Create the data...
      go_data_ps = go_data_agent->create_persistent(
                       i_root_guid = gv_blank_data_guid
                       i_req_date = iv_req_date ).
      TRY.
... finally, write the new data to the data business key map table
          go_data_map_ps = go_data_map_agent->create_persistent(
                             i_data_ref     = iv_data_ref
                             i_action       = iv_action
                             i_data_guid    = go_data_ps ).    "note1
        CATCH cx_root INTO go_exc.
      ENDTRY.
    CATCH cx_os_object_not_found.
ENDTRY.
COMMIT WORK.
<-snip->
The fact that it is possible to pass the object GO_DATA_PS in the call to GO_DATA_MAP_AGENT (the line that I've put the comment "note1" on) indicates to me that the reference to the data persistent object can be written to the DB by the mapping persistent object. After executing the above code the mapping table object and class identifier fields are populated. Also, if multiple entries are written to the tables then the class identifier field in the mapping table is always the same and the object ID is different as expected.
However, the problem I have is if I read an object from the DB using the business key with the following code:
<-snip->
DATA:
    gv_req_date        type        datum,
    gv_data_guid       TYPE        os_guid,
    go_data_ps         TYPE REF TO zcl_ps_data,
    go_data_agent      TYPE REF TO zca_ps_data,
    go_data_map_ps     TYPE REF TO zcl_ps_data_map,
    go_data_map_agent TYPE REF TO zca_ps_data_map,
    go_exc             TYPE REF TO cx_root.
go_data_agent = zca_ps_data=>agent.
go_data_map_agent = zca_ps_data_map=>agent.
TRY.
Read data mapping with the business key
      go_data_map_ps = go_data_map_agent->get_persistent(
                         i_data_ref     = iv_data_ref
                         i_action       = iv_action ).
... then read the data.
      TRY.
          CALL METHOD go_data_map_ps->get_data_guid
            RECEIVING
              result = go_data_ps.
        CATCH cx_os_object_not_found.
      ENDTRY.
    CATCH cx_root INTO go_exc.
ENDTRY.
<-snip->
At no point during this code are the attributes of the object of the persistent class for the data table populated with the contents of the fields of the data table referenced as the attribute of the mapping table. To clarify, when viewing the object in the debugger all the attributes of the mapping object that are simple table fields are populated with the values of the fields of in the mapping table, however, the attributes of the object that represents the persistent class for the data table are not populated with the fields of the data table. I had hoped that by reading the mapping table object the data object would automatically be populated. Is there another step I need to perform to populate the data object?
I'm sorry if the above is hard to follow. Without being able to provide screenshots it's difficult to explain.
If someone has managed to store references to persistent objects in a table and then read the references back could you list the steps you went through to create the persistent classes and include the code that reads the objects please? The code I have almost works, I must be just missing some subtle point...
Thanks in advance,
Steve.

Hi Andrea,
The iObject being replicated at item level for Service Complaints is the SAP standard behaviour.
Generally we raise complaint refering to some sales or service issues. In your scenario you are trying to create a complaint based on an iObject, then you have to mention the corresponding product details. I dont see any business requirement not to copy the iObject product at the item level.
If you want it then I think only you have to write a Z program for it.
Hope this helps!
Regards,
Chethan

Having problem with setting variable on a textfield

I'm using createTextField to create a textfield. I have also created a input textfield with a variable called textline1 (I don't create the inputfield with as).
I want to display the letters in the created textfiled that I'm typing in the input field. So this in my AS coed:
_root.createTextField("text1",1,100,100,300,100);
text1.variable = textline1;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = 50;
format1.bullet = false;
text1.setTextFormat(format1);
but it doesn't work. So anyone see the problem?
(sorry for bad english)

i think you're going to have more problems if you continue using textfield variables. you should not use them. just use the text property of the textfield to reference its contents.
but, if you want to continue, use:
var tl:MovieClip=this;
fontsize=20;
myInputText_txt.onChanged = function(text1:TextField) {
_root.myText_mc.createTextField("text_txt",1,100,100, 100,100);
_root.myText_mc.text_txt.variable = tl["text2"];
text2=text1.text;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = fontsize;
format1.bullet = false;
text_txt.setTextFormat(format1);
p.s. please mark this thread as answered.

Problem with scriplet variable as tag attribute

Similar Messages

Maybe you are looking for