Problem with SP6 + IE + sendRedirect
Hello,
We've had this problem with the sendRedirect method. Under IE (all versions
we tested), a sendRedirect would take a considerable amount of time to
actually perform the redirection; in fact the time it took was approximately
equal to the KeepAliveTimeout setting within the httpd.conf file of our
front end Apache webservers (Redhat 6.2 btw). We have two Apache servers in
front of a cluster of two Weblogic 5.1 servers (SP6).
Now the interesting thing is when we "downgraded" the mod_wl.so file back to
the SP5 version, the problem disappeared. Obviously i'm not happy with
running the SP5 version of the apache/weblogic bridge due to the various
documented issues, so am wondering if a) anyone has seen this themselves,
(b) got it working correctly under SP6, or c) when the hell is SP7 coming
out. ;)
thanks
Carl
Yes, I'm having this problem too with IE, i.e. taking some amount of time until
redirection happens. But with Netscape, the redirect is fast, i.e. normal.
I'm using Weblogic server 5.1 with SP9 (I tested with SP8 with the same result),
Apache 1.3.12, Redhat 6.2, IE 5.0.
When I captured the HTTP response from the server, the content-length header showed
533. Actually the body of the response is nothing, just a line, I think. So I
guess IE tried to receive all 533 bytes of content until the Keep alive timed
out, after which it followed the redirection.
I think this is a bug in Weblogic, it shouldn't spit out 533 bytes with no content.
Iwan
"Joe Bella" <[email protected]> wrote:
>
>How can we make this work if we are using just servlets? To get around
>the problem, I have resorted to the cheesy solution of spitting out
>javascript redirect code. This obviously is a sub-optimal solution.
>
>Any other ideas for workarounds until sp7 comes out?
>
>thanks
>
>joe
>
>"Mike Reiche" <[email protected]> wrote:
>>
>>I've seen this as well. We fixed it by using a jsp:forward instead of
>the sendRedirect.
>>
>>Mike Reiche
>>
>>"Carl Ansley" <[email protected]> wrote:
>>>Hello,
>>>
>>>We've had this problem with the sendRedirect method. Under IE (all
>versions
>>>we tested), a sendRedirect would take a considerable amount of time
>to
>>>actually perform the redirection; in fact the time it took was approximately
>>>equal to the KeepAliveTimeout setting within the httpd.conf file of
>our
>>>front end Apache webservers (Redhat 6.2 btw). We have two Apache servers
>in
>>>front of a cluster of two Weblogic 5.1 servers (SP6).
>>>
>>>Now the interesting thing is when we "downgraded" the mod_wl.so file
>back to
>>>the SP5 version, the problem disappeared. Obviously i'm not happy
>with
>>>running the SP5 version of the apache/weblogic bridge due to the various
>>>documented issues, so am wondering if a) anyone has seen this themselves,
>>>(b) got it working correctly under SP6, or c) when the hell is SP7
>coming
>>>out. ;)
>>>
>>>thanks
>>>Carl
>>>
>>>
>>
>
Similar Messages
-
Session problem on clustered sun fire with SP6.1
Hi All,
I am having a problem with a webapplication on a clustered system.
In the following I describe the current system setup.
I will then describe the setup of the web application.
Following this, I explain the trouble I'm having with sharing sessions in this environment.
Finally, I pose the key question.
SYSTEM SETUP:
Our group has a clustered server setup. I believe the two machines are Sun Fire systems running Solaris 9. Let me know if you need more information concerning the HW.
To manage the cluster, we use Sun Cluster software. Let me know if you need to know the version number. I do not have it handy. We just recently setup the system (in the past 6 months).
Also, we have the newest Sun Web Server installed 6.1. We used the default installation. The only thing we changed was the dynamicreloadinterval variable from "-1" to "60".
WEB APPLICATION:
We have a fairly simple MVC web application setup, which works well on a single-server system. Essentially, the web application (1) asks for a certain input via a webform, (2) takes this input, and uses it to get information from a database, (3) puts this information into a httpsession attribute, (4) redirects the response to a JSP. The JSP gets the httpsession attribute (populated in step 3) and prints it out.
So, HTML with form posts to Servlet, Servlet gets data from database and populates a session attribute, JSP gets that session attribute and prints it out.
Between each transition from HTML, Servlet and JSP, the currently processing server may switch. I.e. the HTML may be served, for instance, by ClusterServer1, the Servlet may be handled, for instance, by ClusterServer2, and the JSP may be served at random by either.
THE TROUBLE I'M HAVING
Sometimes, my JSP is able to find the session attribute and print out whatever I put into the session during the Servlet step. However, sometimes, the JSP will print out "null" (the session attribute isn't available to the JSP).
For the HTML and the JSP, I have the page print out what server it is being served from. Thus, I can tell that the HTML is served from, for instance, ClusterServer1 while JSP is served from, for instance, ClusterServer2. Sometimes, the same server serves both.
KEY QUESTIONS:
Why would this be happening?
How can I have a session stick to the user and be shared across both servers?
What other information would you need to provide an answer concerning this issue?
I appreciate your efforts very much!
Matthias Edrich
dailysunHi All,
Hi Elving,
I read through the documentation and have the following questions:
(1) It seems that I can share sessions amongst both servers if I
configure the web server to store sessions in a persistant manner such as in a file or in a database. Is this correct?
(2) To enable this persistent storage of a session, I would need to change the Session Manager used. Is this correct?
(3) If yes, I have the choice between the following managers. Please correct me if I have misunderstood the options.
- PersistentManager: Instead of securing session information
in memory, this manager saves session information within
a file on the server in a directory, which I specify within
sun-web.xml
- IWSSessionManager: With this manager, I can store sessions
in a defined database or file on the server.
- MMapSessionManager: This manager also stores sessions in
a file on the server
(4) What is the difference between PersistentManager and
MMapSessionManager if my web server is running in
single-process mode?
(5) If MMapSessionManager is a file-based manager, where do I
specify to what directory the related file is stored to as I
do in PersistentManager?
(6) What are the advantages and disadvantages of
Persistent/IWS/MMap managers?
(7) In looking at SessionManagers, am I even barking up
the right tree? It seems like these would help me share
sessions across clustered servers.
(8) Finally, I guess my plan of action would be the following:
-> Identify what session manager to use
-> Include a sun-web.xml file in /WEB-INF containing
the manager-specific info
-> Reload my web application
-> done...
Is this correct?
Elving, I appreciate your help. Thanks!
dailysun -
Form-based authentication problem with weblogic
Hi Everyone,
The following problem related to form-based authentication
was posted one week ago and no reponse. Can someone give it
a shot? One more thing is added here. When I try it on J2EE
server and do the same thing, I didn't encounter this error
message, and I am redirected to the homeage.
Thanks.
-John
I am using weblogic5.1 and RDBMSRealm as the security realm. I am having the following problem with the form-based authentication login mechanism. Does anyone have an idea what the problem is and how to solve it?
When I login my application and logout as normal procedure, it is OK. But if I login and use the browser's BACK button to back the login page and try to login as a new user, I got the following error message,
"Form based authentication failed. Could not find session."
When I check the LOG file, it gives me the following message,
"Form based authentication failed. One of the following reasons could cause it: HTTP sessions are disabled. An old session ID was stored in the browser."
Normally, if you login and want to relogin without logout first, it supposes to direct you to the existing user session. But I don't understand why it gave me this error. I also checked my property file, it appears that the HTTP sessions are enabled as follows,
weblogic.httpd.session.enable=trueHi...
Hehe... I actually did implement the way you implement it. My login.jsp actually checks if the user is authenticated. If yes, then it will forward it to the home page. On the other hand, I used ServletAuthentication to solve the problem mentioned by Cameron where Form Authentication Failed usually occurs for the first login attempt. I'm also getting this error occasionally. Using ServletAuthentication totally eliminates the occurence of this problem.
I'm not using j_security_check anymore. ServletAuthentication does all the works. It also uses RDBMSRealm to authenticate the user. I think the biggest disadvantage I can see when using ServletAuthentication is that the requested resource will not be returned after authentication cause the page returned after authenticating the user is actually hard coded (for my case, it's the home.jsp)
cheers...
Jerson
"John Wang" <[email protected]> wrote:
>
Hi Jerson,
I tried your code this weekend, it didn't work in my case. But
I solved my specific problem other way. The idea behind my problem is that the user tries to relogin when he already logs in. Therefore, I just redirect the user into another page when he is getting the login page by htting the BACK button, rather than reauthenticate the user as the way you did.
But, I think your idea is very helpful if it could work. Problems such multiple concurrence logins can be solved by pre-processing.
In your new code, you solved the problem with a new approach. I am just wondering, do you still implement it with your login.jsp file? In other word, your action in login.jsp is still "Authenticate"? Where do you put the URL "j_security_check"?
Thanks.
-John
"Jerson Chua" <[email protected]> wrote:
I've solved the problem by using ServletAuthentication. So far I'm not getting the error message. One of the side effects is that it doesn't return the requested URI after authentication, it will always return the home page.
Jerson
package com.cyberj.catalyst.web;
import weblogic.servlet.security.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Authenticate extends HttpServlet {
private ServletAuthentication sa = new ServletAuthentication("j_username", "j_password");
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException {
int authenticated = sa.weak(request, response);
if (authenticated == ServletAuthentication.NEEDS_CREDENTIALS ||
authenticated == ServletAuthentication.FAILED_AUTHENTICATION) {
response.sendRedirect("fail_login.jsp");
} else {
response.sendRedirect("Home.jsp");
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException {
doPost(request, response);
"Jerson Chua" <[email protected]> wrote:
The problem is still there even if I use page redirection. Grrr... My boss wants me to solve this problem so what are the alternatives I can do? Are there any other ways of authenticating the user? In my web tier... I'm using isUserInRole, getRemoteUser and the web tier actually connects to EJBs. If I implement my custom authentication, I wouldn't be able to use this functionalities.
Has anyone solved this problem? I've tried the example itself and the same problem occurs.
Jerson
"Cameron Purdy" <[email protected]> wrote:
Jerson,
First try it redirected (raw) to see if that indeed is the problem ... then
if it works you can "fix" it the way you want.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Jerson Chua" <[email protected]> wrote in message
news:[email protected]...
Hi...
Thanks for your suggestion... I've actually thought of that solution. Butusing page redirection will expose the user's password. I'm thinking of
another indirection where I will redirect it to another servlet but the
password is encrypted.
What do you think?
thanks....
Jerson
"Cameron Purdy" <[email protected]> wrote:
Maybe redirect to the current URL after killing the session to let the
request clean itself up. I don't think that a lot of the request (such
as
remote user) will be affected by killing the session until the nextrequest
comes in.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Jerson Chua" <[email protected]> wrote in message
news:[email protected]...
Hello guys...
I've a solution but it doesn't work yet so I need your help. Because
one
of the reason for getting form base authentication failed is if an
authenticated user tries to login again. For example, the one mentionedby
John using the back button to go to the login page and when the user logsin
again, this error occurs.
So here's my solution
Instead of submitting the page to j_security_check, submit it to a
servlet
which will check if the user is logged in or not. If yes, invalidates its
session and forward it to j_security_check. But there's a problem in this
solution, eventhough the session.invalidate() (which actually logs theuser
out) is executed before forwarded to j_security_check, the user doesn't
immediately logged out. How did I know this, because after calling
session.invalidate, i tried calling request.RemoteUser() and it doesn't
return null. So I'm still getting the error. What I want to ask you guyis
how do I force logout before the j_security_check is called.
here's the code I did which the login.jsp actually submits to
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Authenticate extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponseresponse)
throws ServletException, java.io.IOException {
if (request.getRemoteUser() != null) {
HttpSession session = request.getSession(false);
System.out.println(session.isNew());
session.invalidate();
Cookie[] cookies = request.getCookies();
for (int i = 0; i < cookies.length; i++) {
cookies.setMaxAge(0);
getServletContext().getRequestDispatcher("/j_security_check").forward(reques
t, response);
public void doGet(HttpServletRequest request, HttpServletResponseresponse)
throws ServletException, java.io.IOException {
doPost(request, response);
let's help each other to solve this problem. thanks.
Jerson
"Jerson Chua" <[email protected]> wrote:
I thought that this problem will be solved on sp6 but to my
disappointment, the problem is still there. I'm also using RDBMSRealm,same
as John.
Jerson
"Cameron Purdy" <[email protected]> wrote:
John,
1. You are using a single WL instance (i.e. not clustered) on that
NT
box
and doing so without a proxy (e.g. specifying http://localhost:7001),
correct?
2. BEA will pay more attention to the problem if you upgrade to SP6.If
you don't have a reason NOT to (e.g. a particular regression), then
you
should upgrade. That will save you one go-around with support: "Hi,I
am
on SP5 and I have a problem.", "Upgrade to SP6 to see if that fixes
it.
Call back if that doesn't work."
3. Make sure that you are not doing anything special before or after
J_SECURITY_CHECK ... make sure that you have everything configuredand
done
by the book.
4. Email BEA a bug report at [email protected] ... see what they say.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"John Wang" <[email protected]> wrote in message
news:[email protected]...
Cameron,
It seems to me that the problem I encountered is different a little
from
what you have, evrn though the error message is the same eventually.
Everytime I go through, I always get that error.
I am using weblogic5.1 and sp5 on NT4.0. Do you have any solutions
to
work
around this problem? If it was a BUG as you
pointed out, is there a way we can report it to the Weblogic
technical support and let them take a look?
Thnaks.
-John
"Cameron Purdy" <[email protected]> wrote:
John,
I will verify that I have seen this error now (after having read
about it
here for a few months) and it had the following characteristics:
1) It was intermittent, and appeared to be self-curing
2) It was not predictable, only seemed to occur at the first
login
attempt,
and may have been timing related
3) This was on Sun Solaris on a cluster of 2 Sparc 2xx's; the
proxy
was
Apache (Stronghold)
4) After researching the newsgroups, it appears that this "bug"
may
have gone away temporarily (?) in SP5 (although Jerson Chua
<[email protected]> mentioned that he still got it in SP5)
I was able to reproduce it most often by deleting the tmpwar and
tmp_deployments directories while the cluster was not running,
then
restarting the cluster. The first login attempt would fail(roughly
90%
of
the time?) and that server instance would then be ignored by the
proxy
for a
while (60 seconds?) -- meaning that the proxy would send all
traffic,
regardless of the number of "clients", to the other server in thecluster.
As far as I can tell, it is a bug in WebLogic, and probably has
been
there
for quite a while.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"John Wang" <[email protected]> wrote in message
news:[email protected]...
Hi Everyone,
The following problem related to form-based authentication
was posted one week ago and no reponse. Can someone give it
a shot? One more thing is added here. When I try it on J2EE
server and do the same thing, I didn't encounter this error
message, and I am redirected to the homeage.
Thanks.
-John
I am using weblogic5.1 and RDBMSRealm as the security realm. I
am
having
the following problem with the form-based authentication login
mechanism.
Does anyone have an idea what the problem is and how to solve it?
When I login my application and logout as normal procedure, it
is
OK.
But
if I login and use the browser's BACK button to back the login
page
and
try
to login as a new user, I got the following error message,
"Form based authentication failed. Could not find session."
When I check the LOG file, it gives me the following message,
"Form based authentication failed. One of the following reasons
could
cause it: HTTP sessions are disabled. An old session ID was stored
in
the
browser."
Normally, if you login and want to relogin without logout first,
it
supposes to direct you to the existing user session. But I don'tunderstand
why it gave me this error. I also checked my property file, it
appears
that
the HTTP sessions are enabled as follows,
weblogic.httpd.session.enable=true -
Viewing Excel Files using Tomcat - Problem with caching
Hi all,
A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
<%@ page contentType = "application/vnd.ms-excel" %>
<%
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setDateHeader("Expires", 0);
response.sendRedirect("file1.xls");
%>
This all works except but I'm having one big problem.
The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
Any help would be greatly appreciated.
Thanks.I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
Eg.
http://myserver/returnSVG.do#1234567
where 1234567 is a timestamp / random.
Not sure whether you can do this on a file based URL... but maybe worth a shot...
regards,
Owen -
Problem with application server shutdown when connecting
Hi Friends,
I am new to J2EE applications.
I developed a web application that uses jxl and mysql for reading excel sheets. The host I am working on is supposed to be the server. The application I am running is working absolutely fine, by creating a directory and saving the excel file in my webapps folder and inserting the data to the database. But the minute I send the file from client system, there is a sudden shutdown in my server.
I am sending the jsp and java code related to this application and related log file..
I guess the main problem is with sending the exact path from the remote client, rest all is fine including excel and database interactions.
I commented the database interaction class just for now as I don't think there is a problem with it.
I am using Tomcat 4.1, MySQL 3.23
====================================================
JSP FILE
=====================================================
<%@ page language="java" import="pdss.*"%>
<html>
<head><title>File Upload</title></head>
<body>
<% String action=request.getParameter("go");
String message=request.getParameter("msg");
String str="";
if(message!=null)
str="Please enter valid filename!";
ExcelInteraction xlInt=new ExcelInteraction();
if(action==null)
%>
<center><font color="red"><%=str%></font></center>
<form name="myform" method="post">
<input type="file" name="filename"></input>
<input type="submit" name="go" value="Send">
</form>
<%
else if("send".equalsIgnoreCase(action))
String filename=request.getParameter("filename");
int ex=0;
System.out.println("************"+filename.endsWith(".xls"));
if(filename!=null && (filename.endsWith(".xls")))
ex=xlInt.fileTransfer(filename, getServletContext());
else if(filename==null || ("".equals(filename)) || filename.endsWith(".xls")==false)
response.sendRedirect("uploadFile.jsp?msg=a");
if(ex>0)
%> DONE
<% }
else
%> Data Inconsistency found
<% }
%>
</body>
</html>
======================================================
JAVA FILES
======================================================
ExcelInteraction:
package pdss;
import pdss.*;
import java.io.*;
import java.lang.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class ExcelInteraction
//PDSSUtilities pdsUtil=new PDSSUtilities();
public int fileTransfer(String readFile, ServletContext app) throws Exception
int i=0, j=0;
String strDirectory = "pdssexcelfiles";
System.out.println("..............ReadFile..."+readFile);
File srcFile=new File(readFile);
System.out.println(".................Created source file."+srcFile.getAbsolutePath());
File destFile=null;
String newDirStr="",srcFileName="",destFileLoc="", realPath="";
try{
realPath=app.getRealPath("/");
System.out.println("newDirStr..........."+realPath);
newDirStr=realPath+strDirectory;
System.out.println("newDirStr..........."+newDirStr);
if((new File(newDirStr)).exists()==false)
boolean success = (new File(newDirStr)).mkdir();
System.out.println("....................success..."+success);
if (success) {
System.out.println(".................Directory...: " + strDirectory + " created");
srcFileName = srcFile.getName();
destFileLoc=newDirStr+"\\"+srcFileName;
System.out.println("DestFileLoc............"+destFileLoc);
if(srcFile.exists()){
destFile=new File(destFileLoc);
InputStream in = new FileInputStream(srcFile);
OutputStream out = new FileOutputStream(destFile);
byte[] buf = new byte[1024];
int len=0;
while ((len = in.read(buf)) > 0){
out.write(buf, 0, len);
in.close();
out.close();
System.out.println("............File copied to... "+destFile.getAbsolutePath());
System.out.println("......Closing Streams......");
/*if(destFile.exists())
j=pdsUtil.readXlData(destFileLoc);
System.out.println("..........j::"+j+"rows affected");
catch(Exception e)
e.printStackTrace();
System.exit(0);
return j;
=====================================================
LOG FILE FROM HOST SYSTEM:
=====================================================
2008-09-16 16:53:52 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:53:52 StandardContext[pdss]: Trying exact match
2008-09-16 16:53:52 StandardContext[pdss]: Trying prefix match
2008-09-16 16:53:52 StandardContext[pdss]: Trying extension match
2008-09-16 16:53:52 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
2008-09-16 16:54:01 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:54:01 StandardContext[pdss]: Trying exact match
2008-09-16 16:54:01 StandardContext[pdss]: Trying prefix match
2008-09-16 16:54:01 StandardContext[pdss]: Trying extension match
2008-09-16 16:54:01 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
=====================================================
LOG FILE FROM CLIENT SYSTEM:
2008-09-16 16:54:41 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:54:41 StandardContext[pdss]: Trying exact match
2008-09-16 16:54:41 StandardContext[pdss]: Trying prefix match
2008-09-16 16:54:41 StandardContext[pdss]: Trying extension match
2008-09-16 16:54:41 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
2008-09-16 16:54:42 StandardContext[pdss]: Stopping
2008-09-16 16:54:42 StandardContext[pdss]: Stopping filters
2008-09-16 16:54:42 StandardContext[pdss]: Processing standard container shutdown
2008-09-16 16:54:42 ContextConfig[pdss]: ContextConfig: Processing STOP
2008-09-16 16:54:42 StandardWrapper[pdss:jsp]: Waiting for 1 instance(s) to be deallocated
2008-09-16 16:54:42 StandardContext[pdss]: Sending application stop events
2008-09-16 16:54:42 StandardContext[pdss]: Stopping complete
=====================================================
Regards
VasumitraThe VERY FIRST message in the server log gives you a hint as to what the problem might be. The server thinks you have spaces in your PATH to the application server. Therefore, the solution is to kill the server however you need to (task manager, whatever) and then reinstall it in a path that doesn't contain spaces. That's the low-hanging fruit here; if that doesn't work, well, then we will have to find some other solution.
-
Problem with EM (Enterprise Manager is not able to connect to the database)
Hi all,
I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
It says:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
Status Open Details The instance is open.
Host shiman
Port *1521*
SID orcl
Oracle Home d:\Oracle\product\11.1.0\db_1
Agent Connection to Instance (Green arrow)
Status Succeeded
Details
Listener (Green arrow)
Status Up
Host shiman
Port *1521*
Name LISTENER
Oracle Home d:\Oracle\product\11.1.0\db_1
Location d:\Oracle\product\11.1.0\db_1\network\admin
Details
please see the attached file:
http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://shiman:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
Thanks.
Imanemdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595) -
Problem With Seeing Message in Adapter Engine
Hello Everyone,
We are facing a strange problem while running an <b>Integration Process</b>, <b>BPM</b> in PI. In the process, we are trying to read a .CSV File and convert it into a .XML File via FCC. The .CSV file is placed in the XI box itself, under a certain directory. We have configured the process such that whenever the .CSV file is read, its attributes are set to <b>'read only'</b>. After configuring the process, the required XML file did not show up. So we checked that whether the .CSV file was read and it showed up attributes of 'read only'.We cross checked
-First by going to <b>SXMB_MONI</b>; here it said 'No messages available for selection'
-Then by examining the 'channel monitoring' in AE; where we found both the sender and receiver channel are showing green. The sender channel first shows up that <b>'Processing started'</b> and then <b>'Processing Completed Successfully'.</b> The receiver channel does not show up any messages.
-we checked for the XML messages that are in the Adapter in <b>IDX5</b>; it shows <b>'no messages selected'</b>.
-We anticipated that it may be a cache problem and cleared all the caches; but when we tried to clear the Adapter Framework Cache, it popped up an authorization error and the problem persisted.
We are using NW2004s with SP6 at the ABAP and BASIS stack and SP 9 at the Java Stack. Also, all the required connections made in SM59 are in order.
Now, <b>What can be the problem? Is it the difference in SP level that is causing the problem? Or is it something else? What have we missed?</b> Guys, please help us solve this problem.
Need Help. Pleae Reply. Points will be awarded.
Thanking in anticipation.
AmitabhaHi Shabarish,
1.Document name <b>is indeed</b> the name of message type in our case.
2. We did not use delete mode; but once the file was read- we manually changed its attributes from 'RA' to 'A'..and it became 'RA' again after 2 seconds; which is our polling interval.
3. And we have discovered that the file is being read properly..because we can see the XML payload of it and it contains the correct data.But still it does neither show up in SXMB_MONI..nor in IDX5.
<b>Can you please tell us what are the necessary roles for the User PIAFUSER?</b> We suspect that somewhere's an authorization error we are getting; because the AF cache refresh attempt shows "Forbidden" and we are getting an error in Tcode SXI_SHOW_MESSAGE as:
<b>AE_DETAILS_GET_ERROR: no_adapter_engine_found: Unable to find Adapter Engine:</b>; Stack trace shows:<b>Error while reading access data (URL, user, password) for the Adapter Engine</b> -
Performance problem with Orcacle / Crystal reports 8.5 / ASP
Hi,
I have a performance problem with reports running crystal reports 8.5 with oracle databases.
Fetching data appears to be slow. Oracle trace reports (tkprof) shows that fetchsize=1.
Fetchsize in Oracle ODBC is 15 (default).
How can I update te fetchsize in crystal reports?
I would appreciate any help.CR XI R2 is also still available for purchase. This is the last version of CR to use the RDC. Contact sales at 866-681-3435.
Make sure the installed versin is 11.5.12.1838 - if it is not, apply SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip
- Ludek
Edited by: Ludek Uher on Jan 4, 2011 10:05 AM -
Problem with Non JSF Request to JSF Page
Hi All,
I am working on dynamic controls generation based on the request come from non jsf page
For the first request, pageworks perfectly. but when we go for second request, it is not rendering and I am getting same old page.
What I have identified is if I have 2 pages as JSF, application is not giving any problem.
For this I have written small test application contains both JSF pages only.
page1 contains 3 submit buttons.
When submit buttons are clicked based on the request, I get, am able to see the dynamic controls.
SO there is no problem with JSF PAGE to JSF Page Communication
Now I have done some changes in First JSF page. Instead of submitting directly I am submitting the page through JavaScript which is nonb JSF request. There I am facing the problem and based on requested qaction I am not able to see correct rendered page based on the requested action.
Any Idea why it is giving problem for non JSF requests??
Thanks
SudhakarFor Your Convenience in understanding the problem
I am pasting entire test code
Page 1 -- (here page2 is Page1 and Page1 is page2 - some naming convention errors :) )
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
<f:view>
<html lang="en-US" xml:lang="en-US">
<head>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<title>Page2 Title</title>
<link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
</head>
<body style="-rave-layout: grid">
<h:form binding="#{Page2.form1}" id="form1">
<!-- Non JSF REquests -->
<h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=1'; document.forms['form1'].submit(); return false;"/>
<h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=2'; document.forms['form1'].submit(); return false;"/>
<h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=3'; document.forms['form1'].submit(); return false;"/>
<!-- this is JSF request -->
<!--
<h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" />
<h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" />
<h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" />-->
</h:form>
</body>
</html>
</f:view>
</jsp:root>Page1 Bean
* Page2.java
* Created on June 25, 2005, 11:08 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
public class Page2 extends AbstractPageBean {
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
private int __placeholder;
private HtmlForm form1 = new HtmlForm();
public HtmlForm getForm1() {
return form1;
public void setForm1(HtmlForm hf) {
this.form1 = hf;
private HtmlCommandButton button1 = new HtmlCommandButton();
public HtmlCommandButton getButton1() {
return button1;
public void setButton1(HtmlCommandButton hcb) {
this.button1 = hcb;
private HtmlCommandButton button2 = new HtmlCommandButton();
public HtmlCommandButton getButton2() {
return button2;
public void setButton2(HtmlCommandButton hcb) {
this.button2 = hcb;
private HtmlCommandButton button3 = new HtmlCommandButton();
public HtmlCommandButton getButton3() {
return button3;
public void setButton3(HtmlCommandButton hcb) {
this.button3 = hcb;
// </editor-fold>
public Page2() {
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
try {
} catch (Exception e) {
log("Page2 Initialization Failure", e);
throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
// </editor-fold>
// Additional user provided initialization code
protected webapplication8.ApplicationBean1 getApplicationBean1() {
return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
protected webapplication8.SessionBean1 getSessionBean1() {
return (webapplication8.SessionBean1)getBean("SessionBean1");
* Bean cleanup.
protected void afterRenderResponse() {
public String button1_action() throws Exception{
// TODO Following code was replaced by static navigation
getSessionBean1().setId(1);
/* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
return null;*/
return "case1";
public String button2_action() throws Exception{
// TODO Following code was replaced by static navigation
getSessionBean1().setId(2);
/* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
return null;*/
return "case2";
public String button3_action() throws Exception{
// TODO Following code was replaced by static navigation
getSessionBean1().setId(3);
/* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
return null;*/
return "case3";
}page 2
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
<f:view>
<html lang="en-US" xml:lang="en-US">
<head>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<title>Page1 Title</title>
<link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
</head>
<body style="-rave-layout: grid">
<h:form binding="#{Page1.form1}" id="form1">
<h:panelGrid binding="#{Page1.gridPanel1}" id="gridPanel1" style="left: 96px; top: 48px; position: absolute"/>
<f:selectItems binding="#{Page1.radioButtonList1SelectItems1}" id="radioButtonList1SelectItems1"/>
<h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1"
style="left: 384px; top: 120px; position: absolute" value="Submit"/>
<h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1" style="left: 384px; top: 72px; position: absolute" value="Submit"/>
<h:outputLink binding="#{Page1.hyperlink1}" id="hyperlink1" style="left: 480px; top: 216px; position: absolute" value="http://www.sun.com/jscreator">
<h:outputText binding="#{Page1.hyperlink1Text}" id="hyperlink1Text" value="Hyperlink"/>
</h:outputLink>
<h:commandLink binding="#{Page1.linkAction1}" id="linkAction1" style="left: 456px; top: 264px; position: absolute">
<h:outputText binding="#{Page1.linkAction1Text}" id="linkAction1Text" value="Link Action"/>
</h:commandLink>
</h:form>
</body>
</html>
</f:view>
</jsp:root>page2 bean
* Page1.java
* Created on June 25, 2005, 10:52 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import com.sun.jsfcl.data.DefaultSelectItemsArray;
import java.util.Vector;
import javax.faces.component.UIComponent;
import javax.faces.component.UISelectItems;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import javax.faces.model.SelectItem;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class Page1 extends AbstractPageBean {
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
private int __placeholder;
private HtmlForm form1 = new HtmlForm();
public HtmlForm getForm1() {
return form1;
public void setForm1(HtmlForm hf) {
this.form1 = hf;
private HtmlPanelGrid gridPanel1 = new HtmlPanelGrid();
public HtmlPanelGrid getGridPanel1() {
return gridPanel1;
public void setGridPanel1(HtmlPanelGrid hpg) {
this.gridPanel1 = hpg;
private HtmlCommandButton button1 = new HtmlCommandButton();
public HtmlCommandButton getButton1() {
return button1;
public void setButton1(HtmlCommandButton hcb) {
this.button1 = hcb;
private HtmlOutputLink hyperlink1 = new HtmlOutputLink();
public HtmlOutputLink getHyperlink1() {
return hyperlink1;
public void setHyperlink1(HtmlOutputLink hol) {
this.hyperlink1 = hol;
private HtmlOutputText hyperlink1Text = new HtmlOutputText();
public HtmlOutputText getHyperlink1Text() {
return hyperlink1Text;
public void setHyperlink1Text(HtmlOutputText hot) {
this.hyperlink1Text = hot;
private HtmlCommandLink linkAction1 = new HtmlCommandLink();
public HtmlCommandLink getLinkAction1() {
return linkAction1;
public void setLinkAction1(HtmlCommandLink hcl) {
this.linkAction1 = hcl;
private HtmlOutputText linkAction1Text = new HtmlOutputText();
public HtmlOutputText getLinkAction1Text() {
return linkAction1Text;
public void setLinkAction1Text(HtmlOutputText hot) {
this.linkAction1Text = hot;
// </editor-fold>
public Page1() {
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
try {
ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
String id=req.getParameter("id");
if(id!=null)
getSessionBean1().setId(Integer.parseInt(id));
if (getSessionBean1().getId()==1) {
addTextBox();
else if (getSessionBean1().getId()==2) {
addCheckBox();
addRadio();
else if (getSessionBean1().getId()==3) {
addRadio();
// addCheckBox();
} catch (Exception e) {
log("Page1 Initialization Failure", e);
throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
// </editor-fold>
// Additional user provided initialization code
protected webapplication8.ApplicationBean1 getApplicationBean1() {
return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
protected webapplication8.SessionBean1 getSessionBean1() {
return (webapplication8.SessionBean1)getBean("SessionBean1");
* Bean cleanup.
protected void afterRenderResponse() {
private void addRadio() {
HtmlPanelGrid gridPanel = new HtmlPanelGrid();
UIComponent parent = gridPanel1;
HtmlOutputText outputText = new HtmlOutputText();
outputText.setValue("Some Desc");
outputText.setId("somedesc2");
HtmlSelectOneRadio checkBox = new HtmlSelectOneRadio();
checkBox.setBorder(0);
checkBox.setLayout("pageDirection");
checkBox.setId("a3");
UISelectItems items = new UISelectItems();
DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
vectDefaultSelectItemsArray.add(objArray);
arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
int size =arrays.length;
arrays[size - 1].clear();
for (int i =0;i<10;i++) {
arrays[size - 1].add(new SelectItem(""+i+"",""+i));
// array.setItems(new String[] {"Yes","No" });
items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
checkBox.getChildren().add(items);
gridPanel.getChildren().add(outputText);
gridPanel.getChildren().add(checkBox);
parent.getChildren().add(gridPanel);
private void addCheckBox() {
HtmlPanelGrid gridPanel = new HtmlPanelGrid();
UIComponent parent = gridPanel1;
HtmlOutputText outputText = new HtmlOutputText();
outputText.setValue("Some Desc");
outputText.setId("somedesc1");
HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
checkBox.setBorder(0);
checkBox.setLayout("pageDirection");
checkBox.setId("a2");
UISelectItems items = new UISelectItems();
DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
vectDefaultSelectItemsArray.add(objArray);
arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
int size =arrays.length;
arrays[size - 1].clear();
for (int i =0;i<10;i++) {
arrays[size - 1].add(new SelectItem(""+i+"",""+i));
// array.setItems(new String[] {"Yes","No" });
items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
checkBox.getChildren().add(items);
gridPanel.getChildren().add(outputText);
gridPanel.getChildren().add(checkBox);
parent.getChildren().add(gridPanel);
private void addTextBox() {
HtmlPanelGrid gridPanel = new HtmlPanelGrid();
UIComponent parent = gridPanel1;
HtmlOutputText outputText = new HtmlOutputText();
outputText.setValue("Some Description for Control Text Box");
outputText.setId("somedesc");
HtmlInputText textField = new HtmlInputText();
// textField.setId("textField_"+control.getId());
textField.setId("a1");
HtmlOutputText outputText1 = new HtmlOutputText();
hyperlink1Text.setValue(" ");
hyperlink1Text.setStyleClass("bodyText");
textField.setStyleClass("frmObjects");
gridPanel.setColumns(3);
gridPanel.getChildren().add(outputText);
gridPanel.getChildren().add(hyperlink1Text);
gridPanel.getChildren().add(textField);
parent.getChildren().add(gridPanel);
private DefaultSelectItemsArray array = new DefaultSelectItemsArray();
public DefaultSelectItemsArray getArray() {
return array;
public void setArray(DefaultSelectItemsArray dsia) {
this.array = dsia;
private Vector vectDefaultSelectItemsArray = new Vector();
private DefaultSelectItemsArray[] arrays = new DefaultSelectItemsArray[10];
public DefaultSelectItemsArray[] getArrays() {
return arrays;
public void setArrays(DefaultSelectItemsArray[]dsia) {
this.arrays = dsia;
private UISelectItems radioButtonList1SelectItems1 = new UISelectItems();
public UISelectItems getRadioButtonList1SelectItems1() {
return radioButtonList1SelectItems1;
public void setRadioButtonList1SelectItems1(UISelectItems uisi) {
this.radioButtonList1SelectItems1 = uisi;
private ValueBinding getValueBinding(String expression) {
return FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
public String button1_action() {
// TODO Replace with your code
return "case1";
}my navigation.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<navigation-rule>
<from-view-id>/Page2.jsp</from-view-id>
<navigation-case>
<from-outcome>case1</from-outcome>
<to-view-id>/Page1.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>case2</from-outcome>
<to-view-id>/Page1.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>case3</from-outcome>
<to-view-id>/Page1.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/Page1.jsp</from-view-id>
<navigation-case>
<from-outcome>case1</from-outcome>
<to-view-id>/Page2.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>my managed beans xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<managed-bean>
<managed-bean-name>Page1</managed-bean-name>
<managed-bean-class>webapplication8.Page1</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>SessionBean1</managed-bean-name>
<managed-bean-class>webapplication8.SessionBean1</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>ApplicationBean1</managed-bean-name>
<managed-bean-class>webapplication8.ApplicationBean1</managed-bean-class>
<managed-bean-scope>application</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>Page2</managed-bean-name>
<managed-bean-class>webapplication8.Page2</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
</faces-config> -
Problem with forward method of jsp
am having problem with the requestDispatcher.forward method in my jsp + wml , the forward method gets executed but the new page is not displayed in the wap browser,
code snippet
small.jsp
<?xml version="1.0"?>
<!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML 1.1//EN" "http://www.wapforum.org/DTD/wml_1.1.xml">
<%@ page language="java" %>
<%@ page contentType="text/vnd.wap.wml; charset=UTF-8" %>
<%@ page import="java.lang.*,java.io.*,java.util.*,java.util.Vector,java.util.Properties "%>
<%
System.out.println("in small");
RequestDispatcher rd = request.getRequestDispatcher("small1.jsp");
rd.forward(request,response);
%>
small1.jsp
<?xml version="1.0"?>
<!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML 1.1//EN" "http://www.wapforum.org/DTD/wml_1.1.xml">
<%@ page language="java" autoFlush="false"%>
<%@ page contentType="text/vnd.wap.wml; charset=UTF-8" %>
<%@ page import="java.net.*,java.lang.*,java.io.*,java.util.*,java.util.Vector,java.util .Properties"%>
<%
String sm = "small1";
System.out.println("in small1");
%>
<wml>
<card id="two">
<p>
<small><%=sm%></small>
</p>
</card>
</wml>
i get the following output in the log
in small
in small1
but i dont get to see the small1.jsp' content , also the response.sendRedirect method works fine ,,
pls give me the soln
Thnk u in advancethank u very for the repl this is the message which i get in the nokia wap browser...
cannot load small1.jsp(HTTP Error 500 Server Error)
and i use IBM WebSphere as the web server....
and i have found that using response.reset in the small2.jsp overcomes this problem but the card title and the anchor tag is not displayed !!!!
what could be this problem? -
Problem with Instant Client 10.2 with ODBC and Studio 6.0
Has anyone else had the issue of not being able to make a second connection after the first connection has been closed and the free HENV is called via the object distructor? What actually fails is the second time thru the SQLDriverConnect call returns -1. If the connection object is a global but close is still called it will work. So this leads me to believe the problem might be from the SQLFreeEnv call in the distructor.
If I run test using the 10.1 Instant cleint it works fine. I have included some code that I use to test with below.
I am using:
XP Pro sp2
Visual Studio 6.0 sp6
Instant Client 10.2
MDAC 3.51
Oracle Server 10g
Thank you for anyone suggesting advice, help, direction....
#include "stdafx.h"
#include <afxdb.h>
#include "DriverTest.h"
#include <odbcss.h>
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
static char CONN_STRING[] = "DSN=TMTest2;UID=TMMain;PWD=TMMain1;";
CWinApp theApp;
using namespace std;
CDatabase cdGlobalTMMainDB;
BOOL TestOnStack();
BOOL TestGlobal();
int _tmain(int argc, TCHAR* argv[], TCHAR* envp[])
int nRetCode = 0;
// initialize MFC and print and error on failure
if (!AfxWinInit(::GetModuleHandle(NULL), NULL, ::GetCommandLine(), 0))
// TODO: change error code to suit your needs
cerr << _T("Fatal Error: MFC initialization failed") << endl;
nRetCode = 1;
else
// TODO: code your application's behavior here.
cout << "---------------------- Testing connection as global ------------------------" << endl;
TestGlobal();
TestGlobal();
cout << endl << "---------------------- Testing connection on stack -------------------------" << endl;
TestOnStack();
TestOnStack();
cout << endl << "---------------------- Testing connection as global(again) -----------------" << endl;
TestGlobal();
TestGlobal();
return nRetCode;
BOOL TestOnStack()
CString sMessage;
BOOL bOkay = false;
try
CDatabase cdStackTMMainDB;
// try open connection
cout << "Attempt open on stack... " ;
bOkay = cdStackTMMainDB.OpenEx( CONN_STRING, CDatabase::noOdbcDialog );
// close connection
cdStackTMMainDB.Close();
cout << "Successful" << endl;
catch( CDBException *pX )
CString cszTheStr;
printf("FAILED - CDBException has occurred %s\n", pX->m_strError );
pX->Delete();
catch( CMemoryException *pX )
printf("FAILED - CMemoryException has occurred\n" );
pX->Delete();
catch( ... )
printf("FAILED - Other exception has occurred.\n" );
// return results
return( bOkay );
BOOL TestGlobal()
CString sMessage;
BOOL bOkay = false;
try
// try open connection
cout << "Attempt open as global... " ;
bOkay = cdGlobalTMMainDB.OpenEx( CONN_STRING, CDatabase::noOdbcDialog );
// close connection
cdGlobalTMMainDB.Close();
cout << "Successful" << endl;
catch( CDBException *pX )
CString cszTheStr;
printf("FAILED - CDBException has occurred %s\n", pX->m_strError );
pX->Delete();
catch( CMemoryException *pX )
printf("FAILED - CMemoryException has occurred\n" );
pX->Delete();
catch( ... )
printf("FAILED - Other exception has occurred.\n" );
// return results
return( bOkay );
}For what it is worth, I am having a similar problem with an application I support. When I upgraded from 10.2.0.2 to 10.2.0.3 to fix a performance problem, we now have this connection problem. If I can not get a good solution for the InstantClient I will have to start using the Full 10.2.0.3 Client and I am not looking forward to deploying that.
Steve Hicklin
USA -
Problems with the ActiveX bridge for Java beans when using third-party .jar
I encountered the following problem when using the ActiveX bridge for a java bean:
I am using JDK 1.4.2_09 and MS Visual Basic 6.0 (SP6). I wrote a java bean called ProcessViewer (my class ProcessViewer inherits from JComponent and implements the interfaces Serializable and AdjustmentListener) which I would like to use within a VB 6.0 application. I used the ActiveX bridge (packager.exe) to generate a DLL (ProcessViewer.dll) and registered it successfully. The java bean GUI-control works fine within my VB 6.0 application unless my java bean (ProcessViewer.jar) uses any third-party .jar files.
But when I tried to add a reference to some third-party class (com.sap.xxx.xxx....) I got some problems. I could solve the problem with packager.exe by setting the correct CLASSPATH. But at runtime my VB 6.0 application does not work. It crashes or it reports an error like this: "The control ... could not be loaded from axbridge.dll" (although I deployed my .jar file correctly to the directory C:\Programme\Java\j2re1.4.2_09\axbridge\bin and lib). Setting the CLASSPATH environment variable before calling my VB 6.0 application (exe) did not solve the problem.
How can I teach my VB 6.0 application (containing the Java bean ActiveX control) where to find the third-party .jar file? Copying the third-party .jar file to the JRE lib-folder or to the axbridge\lib folder did not solve the problem either.
I studied the documentation about the ActiveX bridge given at:
http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
but I am missing informations on how the third-party .jar files can be found during runtime of the ActiveX container (e. g. a VB 6.0 application).See how to solve your problem with JNI:
http://codeproject.com/cpp/OOJNIUse.asp
More examples (for SWING) in tools setup:
http://www.simtel.net/product.php[id]95126[SiteID]simtel.net
http://www.simtel.net/product.php[id]94368[SiteID]simtel.net
http://www.simtel.net/product.php[id]93174[SiteID]simtel.net -
Problem with Export Schema form CCM 2.0 SP4
Hello all,
when I am trying to export schema form CCM I am getting the following exception /CCM/CX_EXPORT_ERROR
The exception occurred at following point
program: /ccm/cl_catalog_model=======cp
include: /ccm/cl_catalog_model=======cm01c
line: 28
any hint?
GordanHello all,
i'm facing the same problem with CCM 2.0 SP6..
Anyone know the solution?
Thanks for your help!
Antonio -
Problems with IE w/ Apache bridge
We're recently switched over from IIS as our front end web server to Apache
1.3.12. On our login page for one of our site using IE 4.x / 5.x, we've
noticed this to be extremely slow (about 45 seconds) just to login. Once
you login to the site, the site is very fast. However, this is not the case
with Netscape (4.x/5.x). Netscape works fine all of the time and is very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly to the WLS
on the specified port, or when we used IIS. The only time this shows up is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to hold up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before?Thanks for the help everyone, but BEA sent us a beta-version of the new
proxy for Apache on LINUX. This fixed the problem, and should be fixed in
the next service pack.
"mreiche" <[email protected]> wrote in message
news:3a19ee1e$[email protected]..
>
See this article - we found a similar problem due to a sendRedirect() andfixed it by using a jsp:forward
instead.
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
per.interest.jsp&item=3835&utag=
>
Mike Reiche
"Charlie Crook" <[email protected]> wrote:
Is the delay in loading your login page within the browser, or after the
user submits it?
Does the page contain IIS extensions ( which are no longer needed )?
"Mike Kendzierski" <[email protected]> wrote in message
news:3a120fa3$[email protected]..
We're recently switched over from IIS as our front end web server toApache
1.3.12. On our login page for one of our site using IE 4.x / 5.x,
we've
noticed this to be extremely slow (about 45 seconds) just to login.Once
you login to the site, the site is very fast. However, this is not thecase
with Netscape (4.x/5.x). Netscape works fine all of the time and is
very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly tothe
WLS
on the specified port, or when we used IIS. The only time this shows
up
is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to
hold
up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before? -
Re: nsapi problem with WL 4.5.2 no sp with iPlanet 4.0
We are noticing the same problem with WL5.1, esp.
I can replicate this by reducing the number of executeThreads
within WebLogic to a very low number (say 5). It seems to
me that there is a problem with the WebLogic proxy (NSAPI); it seems to be gettting into a state where it is not able to do handle connection startups/shutdowns in a graceful manner leaving IDLE connections.
Any pointers would be appreciated.
Thanks.
-dev
"Jaime Chambron" <[email protected]> wrote:
>here is more details on the probs we are seeing:
>
>Besides a number of other issues that I am experiencing with iPlanet 4.0
>there are two specific issues that I need your help in resolving. These
>issues are as follows:
>
>Idle connection on the web server. Summary: While running load tests on the
>site I see up to 500 or more idle connection that will not time out or
>recycle. Has anyone come across this issue? How was it resolved? Any
>thoughts on what could be causing the idle connections? Below is an example
>of the idle connection.
>
>*.* *.* 0 0 33232 0 IDLE
> *.* *.* 0 0 33232 0 IDLE
> *.* *.* 0 0 33232 0 IDLE
> *.* *.* 0 0 33232 0 IDLE
> *.* *.* 0 0 33232 0 IDLE
> *.* *.* 0 0 33232 0 IDLE
>
>
>
>
>2. Logging. How do I turn off verbose logging or minimize it?
>Summary: Our error log files are continuing to fill up causing sluggish
>performance and web server crashes. Any suggestions? Here are some
>of the errors being logged.. (Suspect the NSAPI plugin)
>
>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection -5971,
>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection -5971,
>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection -5971,
>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>[25/Jul/2000:12:54:57] failure ( 1324): for host 208.29.209.9 trying to GET
>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10 seconds.
>
>[25/Jul/2000:13:18:18] warning ( 1324): DaemonProcessor::Run terminating
>with 404 sessions still in progress
>[25/Jul/2000:13:18:19] info ( 1437): successful server startup
>[25/Jul/2000:13:18:19] info ( 1437): Netscape-Enterprise/4.0 SP4
>BB1-02/07/100 17:53
>[25/Jul/2000:13:34:49] failure ( 1437): for host 208.29.209.9 trying to GET
>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10 seconds.
>
>[25/Jul/2000:13:35:43] failure ( 1437): for host 208.29.209.9 trying to GET
>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10 seconds.
>
>
>
>
>Jaime Chambron wrote in message <[email protected]>...
>>hi -
>>
>>we are having a ton of probs with our error log on our web servers filling
>>up and degrading performance b/c we are seeing the following error with our
>>jsps (the web server sees up to a point in runnign,then all of a sudden
>>starts to get errors after some load testing)
>>
>>the prob causes errors in the proxy.cpp file to occur (at different line
>>numbers, i believe 400 something and 830) and says things like "file not
>>found" (though it is there) or timeout...
>>
>>this is causing our webservers to eventually grind to a hault, and it looks
>>like is has something to do with the nsapi plug in. do we need a patch? do
>>we have something configured wrong?
>>
>>
>>please help!!
>>thanks
>>j
>>
>>
>
>
Hi,
I'm experiencing the same problem with wls 5.1 sp 9 and iPlanet 4.1 sp 5.
Did you figure this problem out?
Regards,
Torleif Galteland
"Michael Caughey" <[email protected]> wrote:
>
>Have you had any luck in figuring out what is the root cause of your
>problem?
>We are having a simalar problem using weblogic 5.1 SP6 & iPlanet 4.1
>SP2.
>Thanks,
>
>"Dev Worah" <[email protected]> wrote:
>>
>>We are noticing the same problem with WL5.1, esp.
>>
>>I can replicate this by reducing the number of executeThreads
>>within WebLogic to a very low number (say 5). It seems to
>>me that there is a problem with the WebLogic proxy (NSAPI); it seems
>>to be gettting into a state where it is not able to do handle connection
>>startups/shutdowns in a graceful manner leaving IDLE connections.
>>
>>Any pointers would be appreciated.
>>
>>Thanks.
>>-dev
>>"Jaime Chambron" <[email protected]> wrote:
>>>here is more details on the probs we are seeing:
>>>
>>>Besides a number of other issues that I am experiencing with iPlanet
>>4.0
>>>there are two specific issues that I need your help in resolving.
>These
>>>issues are as follows:
>>>
>>>Idle connection on the web server. Summary: While running load tests
>>on the
>>>site I see up to 500 or more idle connection that will not time out
>>or
>>>recycle. Has anyone come across this issue? How was it resolved?
>
>>Any
>>>thoughts on what could be causing the idle connections? Below is an
>>example
>>>of the idle connection.
>>>
>>>*.* *.* 0 0 33232 0 IDLE
>>> *.* *.* 0 0 33232 0
>>IDLE
>>> *.* *.* 0 0 33232 0
>>IDLE
>>> *.* *.* 0 0 33232 0
>>IDLE
>>> *.* *.* 0 0 33232 0
>>IDLE
>>> *.* *.* 0 0 33232 0
>>IDLE
>>>
>>>
>>>
>>>
>>>2. Logging. How do I turn off verbose logging or minimize it?
>>>Summary: Our error log files are continuing to fill up causing sluggish
>>>performance and web server crashes. Any suggestions? Here are
>>some
>>>of the errors being logged.. (Suspect the NSAPI plugin)
>>>
>>>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection
>-5971,
>>>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>>>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection
>-5971,
>>>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>>>[25/Jul/2000:12:54:57] failure ( 1324): Error accepting connection
>-5971,
>>>oserr=24 (PR_PROC_DESC_TABLE_FULL_ERROR)
>>>[25/Jul/2000:12:54:57] failure ( 1324): for host 208.29.209.9 trying
>>to GET
>>>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10
>>seconds.
>>>
>>>[25/Jul/2000:13:18:18] warning ( 1324): DaemonProcessor::Run terminating
>>>with 404 sessions still in progress
>>>[25/Jul/2000:13:18:19] info ( 1437): successful server startup
>>>[25/Jul/2000:13:18:19] info ( 1437): Netscape-Enterprise/4.0 SP4
>>>BB1-02/07/100 17:53
>>>[25/Jul/2000:13:34:49] failure ( 1437): for host 208.29.209.9 trying
>>to GET
>>>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10
>>seconds.
>>>
>>>[25/Jul/2000:13:35:43] failure ( 1437): for host 208.29.209.9 trying
>>to GET
>>>/, wl-proxy reports: Cannot connect to WebLogic: timed out after 10
>>seconds.
>>>
>>>
>>>
>>>
>>>Jaime Chambron wrote in message <[email protected]>...
>>>>hi -
>>>>
>>>>we are having a ton of probs with our error log on our web servers
>>filling
>>>>up and degrading performance b/c we are seeing the following error
>>with our
>>>>jsps (the web server sees up to a point in runnign,then all of a sudden
>>>>starts to get errors after some load testing)
>>>>
>>>>the prob causes errors in the proxy.cpp file to occur (at different
>>line
>>>>numbers, i believe 400 something and 830) and says things like "file
>>not
>>>>found" (though it is there) or timeout...
>>>>
>>>>this is causing our webservers to eventually grind to a hault, and
>>it looks
>>>>like is has something to do with the nsapi plug in. do we need a
>patch?
>>do
>>>>we have something configured wrong?
>>>>
>>>>
>>>>please help!!
>>>>thanks
>>>>j
>>>>
>>>>
>>>
>>>
>>
>
Maybe you are looking for
-
How to access my configs n customization in my project
Hi Gurus, I am a learner...n i have done all my configs n customization by creating a new Project in my IDES system. However, when i am trying to use them through Easy Access Screen, i am unable to use those configs. For Ex. I have configured new Sal
-
Sample java code for web service calling
Hello, I need to call the web services for adding/updating records on Oracle On Demand Entities. In particular i need a sample code in java language that explain how to append the sessionid to the SOAP request when calling the web service. thanks in
-
I have a transactional data source in R3 which has a field discount percentage pulling into BW. I need to make it like a % field. For example if the value is 5, I need to get it 5%. What happens is sometimes it adds up with similar records. How c
-
Trying to troubleshoot wireless & wired connections
If this type of question has already been addressed in a forum, please point me in the right direction! I recently bought a Bluray player that requires an Ethernet connection to get online. I would like to be able to stream movies once in a while. My
-
How to do SelectAll() when during JTree node edit?
This question's been asked a few times but the answers haven't been very clear ( or the code that was posted was broken, etc. ) I have a JTree -- when the user edits a node, I want to initially select all the text in the .that node. Does anyone have