Problem with Support Package SAP_BASIS (Error Stop) IMPORT_PROPER
Hi Everyone,
i want to apply Support Pack for SAP_BASIS. Now Its Level is 0009 (ECC 6.0).
i did import the SPs SAPKB70010 and SAPKB70011. We only want until Stack 11.
The test scenario was without an error. But during the Standard scenario there occurred a problem:
SPAM Status: Error Stop
Import Phase: IMPORT_PROPER
I guess there are different reasons:
1) We didn´t make a SPAM update before! it´s still version 7.00/0021.
2) I have no idea if the guy before me made a kernel update.
And now i wanted to update SPAM to version 27. but first i should "repair" this problem because the SAP_BASIS is still in the queue.
Is there a possibility to delete the queue, update SPAM and the Kernel and then try it again with this support package?
We cannot go further than Stack 11!
please help me!
Hi,
This is not because of SPAM version nor the upgrade of kernal.If that was a SPAM problem then it will
not allow you to define the queue.
There are some know problems with this basis patches please read the note .Just run the import again this error would not occur.
If this error occurs then post the import logs for further analysis.
Regards,
Vamshi.
Similar Messages
-
Problem with support package import SAPKNA7018
Hi Experts,
I have installed CRM 7.0 support release 1. After that,I have successfully imported the following components SAPKA70107 (level 7), SAPKB70107 (level 7), SAPK-70107INPIBASIS (level 7), SAPKW70107 (level 7) and SAPK-70108INSAPBSFND (level 8). Also, SAP_AP: SAPKNA7016 & SAPKNA7017 have been imported successfully.
I facing the below issue while trying to import SAPKNA7018. (As it is CRM I am importing with CRM Support Package Manager wizard.)
Prerequiste Log. AND Prerequisite Prereq typ Package Description
SAPKW701?? 1 SAPKNA7018 P Could not find an equivalent
But already SAP_BW patch is successfully upgraded to level 7 (SAPKW70107).
While checking PAT07 table it is showing dependancy as:
PATCH CONJUNCT SEQUENCE REQ_TYPE REQUMENT CONFLICT_R TRUTH FLAG DESCRIPT
SAPKNA7018 01 001 A SAP_AP,700 T
SAPKNA7018 01 002 P SAPKNA7017 T SAP_AP,700,0017
SAPKNA7018 01 003 A SAP_BW,700 T
SAPKNA7018 01 004 P SAPKW70022 T SAP_BW,700,0022
No idea, why dependency is on SAPKW70022 while it is already in SAPKW70107 level. For other landscapes we never faced this error while did the same patching. Could anyone give some clue on this?
Thanks & Regards,
Sujit.Hi Experts,
Please share your thoughts. The issue is still persisting.
Any help is appreciated.
Thanks & Regards,
Sujit. -
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.
Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Hi,
I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
Note:
Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
Using Window XP , .Net 2008, SAP B1 8.81 Version
Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
Any help is appreciated.
Thanks in advance.
Parvatha Solai.NHi,
Try post a comment in B1DE 2.0.1 new version! blog.
Beni. -
Error code 2318 (problem with installation package) HELP
Ok so I tried to download itunes earlier today, and it went fine until the very end, I got this message...
''The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318''
So I went through and tried to repair the itunes to no avail. So I removed everything and ran the microsoft installer cleanup utility, then re-installed itunes and quicktime. Again everything went fine until the end, got the same ''2318'' error message. Itunes shows up on my desktop, as does quicktime. When I click itunes I get a pop up window telling me the application must close due to error, would I like to send an error report.
So I went back and uninstalled everything AGAIN, and now its downloading again. I'm getting kidn of peeved... can anyone help me?ok I got it. Had to end up doing a small overhaul on the computer to remove the corrupted ''sample.mov'' file out of the quicktime folder, but its working now.
-
I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.
Please get in touch with Viber's customer support.
-
URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS
Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh RanaI got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh -
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
-
I am running Windows 7 64bit. I downloaded the latest version of iTunes and ran the installer. This message pops up, I click OK and the installation continues. Then, when I try to launch iTunes I get this: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)". I have also received this error message even when the installation hasn't had any problems. I have uninstalled, reinstalled, restarted, repaired my .net framework, uninstalled all components following the steps in Article: HT1923 http://support.apple.com/kb/HT1923 all to no avail. It still won't run. It was working perfectly before I updated it to 10.7. After that it all went to crap. I even tried installing the previous version and still get this error message. Any suggestions?
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
I have an iPod classic.Somehow it stopped interacting with my computer.When i try to click on itunes i get an error message.When i connect my iPod to the computer it does not show the music i have on it.I tried to uninstall itunes and all apple related programs but I get an error message 2324 when I try to uninstal iTunes
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled -
I'm having problems installing Itines on my new computer with Windows 8. I always get problem with install. the error code is 2503. How do I correct this?
Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Dear all,
I am currently update my system.
The current version is ECC6 EHP7 based on NW7.4
SAP_BASIS 740 0002
SAP_ABA 740 0002
I would like to upgrade to SPS level 5
We use DB2 LUW 10.5
In the update phase, we encountered an error message:
SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
As I can see in the log file, error messages are as below
===========================
3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
3 ETP399
2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED " - repeat
2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N A reference to column "SHLPNAME" is ambiguo
2EETP345 us. SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
3 ETP355Xstatements:
3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
3 ETP399 "AS4LOCAL" = 'A'
3 ETP399
2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL " - repeat
2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP338XTouch Load of nametabs
===========================
I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
Do you have any idea how to solve this problem? Big thanks!
Best regards,
Fresh manHi Ashutosh,
Many thanks for your reply, yes this definitely solve my problem.
But I feel quite confused what's the real reason.
Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
The support packages are totally the same...
is it because I should upgrade from 02 to 05 directly? 04 has problem?
or I should update with SUM instead of SPAM?
or it is because of DB2??
or I should involve other packages like something like ST into the update queue?
Best regards,
Fresh -
Installation problems with Creative Suite CS5 (Error (-1))
I'm trying to install the Adobe Creative Suite CS5 on a Windows XP 32-Bit laptop.
After entering the serial number, the installation begins and stops at around 7%. Each time I get this error: The Setup encountered an error(-1) during install. Please restart the machine and try again.
I've tried restarting the machine, uninstalling Adobe Reader, and using the Adobe Cleaner tool. None of these things have worked.
I've tried searching and can't seem to find any solution to this problem. I provided the error summary below. Any help would be appreciated.. this is driving me crazy.
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 5 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW039: Payload {A1BC7068-C1BA-410F-8B9A-DB807C803DE2} Creative Suite 5 Design Premium 5.0.0.0 is not installed so should not be there in the deployment file
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 0 - No error.I usually start from the bottom of the log and search for Error and Fatal. I then search for the error in the Adobe knowledge base, the search bar at http://www.adobe.com/ accesses this.
You can try using the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/. There as an option there which allows you to package for support. You can then post the token to this thread. -
SOLUTION MANGER SUPPORT PACKAGES CRTs ERROR
Hi all..
System status: solution manager 4.0/MS SQL/Windows 2003/kernel-159/sapm 027/700/tp version:372.04.29
When i am applying basis and abap patches(11) then i am getting CRTs error.
the error message is-
The import was stopped, since an error occurred during the phase
ADDON_CONFLICTS_?, which the Support Package Manager is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem
- Error in phase: ADDON_CONFLICTS_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code:
- Error message: TP_INTERFACE_FAILURE
how can I remove this error? please help me urgently.
thanks
NANIHi,
You have to add extra addon (CRT) support pack with SAP Basis support pack. It is necessary for solution manager.
Please can you tell me which support pack you are installing and what is your system version. (e.g SAP ECC 6.0 or SAP R/3 4.7 etc)
Maybe you are looking for
-
FaceTime camera appears off-center
I noticed today that on my iPhone 6 the FaceTime camera on the front appears way off-center. I've attached a photo, but it's a little hard to see. It doesn't seem to interfere with the camera, but I don't really know that without a comparison and I h
-
Other websites keep opening up when i open firefox i.e facebook
when i open my homepage other pages open up i.e gambling sites or dating sites == This happened == Every time Firefox opened
-
Format a query in a special way
Hello all, I have two tables, one with car brands and the other with models and they are put together with a view like this: ID Car_Brand Car_ID Model Model_ID Existing 1 Dodge 100 Sport 124 1 2 Dodge 100 Estate 125 0 3 Dodge 100 Off-Road 126 0 4 Hon
-
Load java main from java class
Is it possible to load a java main of some class from other java class? example: public static void loadClass(final String name, final String param) { try { Class c = Class.forName(name); Class[] cParams = new Class[1]; cParams[0] = String.class; Met
-
Admin server looses managed servers
we hava 2 clusters of 2 wls 6.1 sp2 instances each on 2 hpux 11 boxes. The wls console shows all the instances when booted up. But suddenly, after a period( and this random without a pattern), the admin seems to loose some of the managed servers. The