Problem with that: 'MOLKPO+Calibri'.

Someone can help me with that? I can´t open a file with Adobe Reader from my emial because I received the next mesage: No se puede extraer la fuente incrustada 'MOLKPO Calibri'. Algunos caracteres podrían no mostrarse o imprimirse correctamente. Thank you for your help

What is your operating system? Reader version?
You may need to contact the creator or the PDF about the problem.

Similar Messages

What,s the reason to stop iphone 5?? Is there any problem with that phone?? Because still 4s is in market but iphone 5 is stopped.... What,s wrong with apple??

Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????

It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.

I have a Mac OS X 10.6.8 and wish to upgrade to newest version...any problems with that?

i have a Mac OS X 10.6.8 and wish to upgrade to newest version (yosemite?)...any problems with that?

Read the system requirements for Yosemite.

I have a 2010 mac book pro and track pad is not working well, is there a problem with that year?

I have a 2010 mac book pro and track pad is not working well, is there a problem with that year. I heard that the 2011's had track pad trouble.

All recent versions of Mac OS X use bash, so avoiding Mavericks won't help you with that problem (which isn't a problem for most users).
iWeb is another matter. My advise: migrate your website to Wordpress first and start thinking about upgrades later.

Why Safari doesn't want to load the page of an online game ?! i never had problems with that before !

Hello! my name is Arina! I have an online game that i like to play named DarkOrbit ! since the last update of Safari .. the browser says it will remember my name in the game and my password but it doesn't .. and this is just for this game, don't have this problem with Facebook or yahoo mail or so ! Please tell me if is the game's fault or Safari ?
Thank you. Arina

You can try to (re)install the current Firefox 17.0.1 release if it isn't working with the current Firefox 18 beta
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My daughters have Iphones and both are registered to my email. The problem with that is that one get the others messages. I have to make one account for each their phones. How do I do that?

My daughters got Iphones a couple of years. I do not have an Apple-phone. I registered both phones on my email. The problem is that one of them get the others messages. I therefore need to make two different accounts for their apple-products. How do I do that?

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

Avoiding OS patch 2.4, anyone see a problem with that?

Based on the new 'features' the release offers, I decided to hold off on upgrading my AppleTV. Other than the prompt every time i use the device, I don't see a problem here.
I guess my main question is around subsequent upgrades. Do i have to upgrade to 2.4 to be able to go to 2.Next or 3.0 when it's out, or can I jump versions when they become available?

The tv will update to the latest version from any previous version, indeed you are unable to do incremental updates.
There are problems encountered by some with any upgrade, I don't consider 2.4 to have caused any more than normal and I haven't seen any problems on a vanilla system. There are some features that have been changed, some that others may not have liked, but generally speaking I'm not sure why you shouldn't upgrade unless you are aware of specific features that may no longer be available.

Moved InDesign from one computer to another and problems with that

Hi,
New to Adobe so please, if I'm posting in the wrong spot or the wrong way feel free to politely tell me where to go.
Using Windows7/64Bit
Adobe InDesign V8.0
We recently purchased this product for one of our users. Worked and had no complaints.
User's laptop exhibited signs of imminent departure soon after installation - replaced laptop with new unit and retained old laptop.
User immediately complained that some features were 'greyed out'.
Firstly drew my attention to the 'Paragrah Styles' in the toolbox or menu on the right hand side. User had created, what she refers to, as a shortcut menu on this panel on the right hand side.
Found a thread indicating method for repairing damaged preferences.
Backed up both the directories found under:
C:\Users\USERNAME\AppData\Roaming\Adobe\InDesign\Version 8.0\en_US
C:\Users\USERNAME\AppData\Local\Adobe\InDesign\Version 8.0\en_US
Copied same folders and content from old laptop and you wouldn't believe it but it worked a treat.
However, user had failed to point out that none of the other features were working also. Eg. Pages, Layers, Switches etc.
It seems that the options appear on this panel on the right hand side but you cannot interact with them at all. Whilst a number of different pages appear in the Pages tab, none are selectable
Any assistance would be gratefully received,
With thanks, in advance,
Martin

Hi,
Firstly apologies for posting a question then leaving it for so long. Illness can never be scheduled in :/
Secondly, Bob, you were 100% correct. Fonts were set to 125% and Aero was enabled. I reduced font size and also disbaled Aero and it immediately fixed the problem.
Now, the question is which one of the 2 was more likely the problem as I foolishly applied both fixes at the same time. The answer would be the font size as Aero was also enabled on the old laptop which was working OK.
Many thanks for the responses, many thanks for your help and tips my hat to Bob - well done.
PS I did originally do a full install onto the new laptop.
Martin

GTX 970 4g OV max limit...any problem with that??

Hi, my 970 stock voltage is 1,212v and the ASIC is 65,4% (quite low) and vbios 84.04.2f.00.f1 ...in afterburner, despite there is a slider from 0 to +87v it seems like there is only 3 steps in voltage increase...for me they are:
+0=1,212v
+0 to +25mv=1,237v
+25 to +87mv=1,256v
-Is it SAFE to run the card at 1,256v 24/7 (obviously only when gaming)???
-Why the slider is not applying the voltage in increments as slider indicates??, I mean, +37mv should be = +37mv voltage increase right??
-And the most important thing...ONLY when voltage reach 1,256v I see in the graphs that the OV MAX LIMIT = 1 all the time (or most part) so I wonder is its SAFE to run the card with ov max limit =1???...according with the 1,256 I think there is lots of people running the card this way but not sure if ov max limit =1...
Finally, I can run the card at 1486Mhz core (+170) and 3507Mhz memory (+0) at +25mv (1,237v) without the ov max limit at 1 should I leave the card just there???
Many many thanks guys!!

Quote from: watermanpc85 on 28-April-15, 19:22:29
Thanks for the reply...I dont know hopw to upload the actual bios file but I recently updated the bios to the .186 version (latest)...now it says 84.04.36.00.f1.
The vbios version is NV316MH.186 the numbers from gpu-z (84.04.36.00.f1) are irrelevant and do mean nothing.
Quote from: watermanpc85 on 28-April-15, 19:22:29
So I asume that there is not any problem by running the card with OV max limit=1 right???(as soon as the voltage is 1,256v)...anyway right now is a non sense for me because as soon as I increase voltage to 1,256v the card reaches max TDP limit and then it throtles...I would need to increase the TDP limit then...I have researched in the net but I cant find I CLEAR solution on how to increase the little 10% default...is there any "easy" way to do it??
It just means that you reached the point where no more increases are possible.
For increasing power limit further than is allowed by default a vbios mod is required that comes with a risk and voids warranty. If you are not familiar with vbios mods than there is no safe and easy way.

Tons stored on my desktop - any problems with that?

I have these really cool icons (stickers) that i keep large so most of my stuff is stored on my desktop. I remember in classic it was a no no to keep to much stored on your desktop - you would often have to 'rebuild desktop'. Is this an issue in OSX? can I put as much as I want on there without performance suffering? Any info would help. Thanks!

Hi Marcus MaColonna;
Yes. Storage a lot on the desktop will impact performance negatively. You should store your things elsewhere, such as Home, if you done want to have poor performance.
Allan

Problems with the/while opening the THX Setup Cons

hi everybody,
hopefully i'm not asking an already often answered question, but since i didn't find a solution for my problem on the initial forum search i'll try my luck with a new thread.
my first (little) problem is that whenever i open the thx setup console all volumes are set to the maximum. not that big of a deal, but still annoying. is there something i can do against this?
the second (not that big either) problem is, that the calibration settings, to be exactly the db-settings, in the thx console aren't properly saved. sometimes (i didn't yet find out after doing what or when or why) they are just changed, and i have to set them for my setup again. any ideas?
thx for your help in advance,
-vio

I had the same problem. Sometimes the settings just seemed to change, not sure why. I don't know of a fix and there is no save button.
I just finished uninstalling everything Creative and then reinstalled the THX Console off the original disc only, then the new Audio Console, then the new Beta Drivers. Everything is working fine for now. There is also an update for the THX Console, but I haven't installed it yet.
Good luck, hope this hel
ps.
Jason

Problem with JPanel in JFrame

hai ashrivastava..
thank u for sending this one..now i got some more problems with that screen .. actually i am added one JPanel to JFrame with BorderLayout at south..the problem is when i am drawing diagram..the part of diagram bellow JPanel is now not visible...and one more problem is ,after adding 6 ro 7 buttons remaing buttons are not vissible..how to increase the size of that JPanel...to add that JPanel i used bellow code
JFrame f = new JFrame();
JPanel panel = new JPanel();
f.getContentPane().add(BorderLayout.SOUTH, panel);

Hi
JFrame f = new JFrame();
JPanel panel = new JPanel();
// Add this line to ur code with ur requiredWidth and requiredHeight
panel.setPreferredSize(new Dimension(requiredWidth,requiredHeight));
f.getContentPane().add(BorderLayout.SOUTH, panel);
This should solve ur problem
Ashish

Problem with Photoshop CS4 after migration to new Mac

I just migrated from an old Mac to a new Macbook Pro running Mavericks. I'm having a problem with Photoshop CS4. Specifically, two things:
1) When I open an image in Camera Raw, I get this error:
Fatal error - missing component
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
2) When I try to save anything, it tells me it can't because of a program error.
I've looked around for a solution. Apparently I had to install Java, but that hasn't solved the issue. A couple of people mentioned that reinstalling would work for a similar problem. My problem with that is that my disk is on the other side of the world and my new macbook doesn't have a disk drive anyway. So I logged into my Adobe account hoping to see a download link for software I have licences for, but there isn't one.
So my question is firstly, whether there is a simpler solution to the errors I am getting and, if not, if there's a solution to reinstalling Photoshop CS4 without the disk.
Thanks!

Did you use Apple's migration tool? It misses a lot of support files, especially in the Application Support directories.
You'll have to copy those files manually, or reinstall the app.

DHCP Problem with ASA 5505

Hi. I have an ASA 5505 configured for Transparent Mode. The Outside interface connects to a router (RV042). The router manages DHCP. With the 5505 in the system, all computers can connect to the internet and to each other, except for a few. The problem computers can be made to work if they are set to a specific address, rather than automatically assigned by the router. Some of the iPads work correctly, some do not. At least one Apple Notebook cannot connect even if I enter a static address.
Consulting the documentation, I found that DHCP traffic (UPD Port 67 and 68) needed to be enabled via rules for the Inside and Outside interfaces. I did that in ASDM but now nothing works.
I have pulled the 5505 out of the system and restored it to the configuration that worked for most of the computers.
Any suggestions would be appreciated. I can pull a "show" run from CLI if it is useful.
Thanks...

Understood. I tried adding the "inside_out extended permit ip any any" command, but it made no difference. Because the implicit rule (permit ip traffic to any less secure interface) is still in the access list table, it would seem the additional extended rule is not needed.
When I first received the 5505, it had an older version of firmware. At the time, when I entered any rule in ASDM it deleted the "less secure" implicit rule, which then broke the system since there was no path for internet traffic from inside to outside, as you have stated. With the newest firmware release, however, when I enter a rule, the "less secure" implicit rule does not go away.
So, with help from the folks here I have made progress. Right now the issue is that when the 5505 in Transparent Mode is between the router and user computers, the computers cannot reliably get addresses that are auto-assigned by the router.
Looking through the logs displayed on ASDM, I noticed the following curious statement:
"6 Mar 31 2014 07:16:42 fe80::1131:41c2:3627:8339 63575 ff02::1:3 5355 No management IP address configured for transparent firewall. Dropping protocol UDP packet from outside:fe80::1131:41c2:3627:8339/63575 to inside:ff02::1:3/5355"
However, I have configured a management IP address, and it is listed in the "show" document that I posted yesterday:
interface BVI1
ip address 192.168.1.10 255.255.255.0
So, I am confused.
I appreciate the help. I am new to the 5505, although I participated as a "friendly" in the ASA program some years ago. I recall a similar problem with that setup. Regrettably, I can't remember how we fixed it...
Regards...

Problem with Battery and Keyboard Light

First off, sorry if this is in the wrong section. This is my first time on these forums.
Just today I was skyping my girlfriend on my Macbook Pro (that I got in the summer or 2010). I have SmcFanControl installed and I regularly use it to monitor/increase my fan speed. As I regularly skype and play WoW on this computer, my computer temp often sits around 160-170 degrees F.
Today it was at around 170 and I had it on my lap. I sat up and jostled the computer a little and it shut off. The power cord light, which was green, immediately turned off. I tried unplugging it and plugging it back in and it stayed off. The computer wouldnt restart for about 30 seconds. Finally after hitting the power button several times it turned on.
It worked fine for 10 or so minutes. I assumed I just moved it too suddenly, although I have never had a problem with that before. Then, I moved again and it shut off AGAIN. It took another 30 seconds to register the power cord and to turn on.
This time, when it booted up, it said my clock was set to a date before 2008, althought it was still at Feb 16, 2011. Also, as soon as I turned it on, the fans were going full speed (as loud as when i have SmcFanControl set at 6200 rpm). I opened SmcFancontrol and it says my computer's temp is at 32 Degrees F and 000 rpm, which I know is not correct. I can't change the speed of the fans and the temp of the computer hasnt changed at all.
Also, my battery icon has an X through it and says "No batteries available" "Power Source: Power Adapter." The green light is very dim on the charger.
AND on top of this, my keyboard lights no longer turn on, even pushing F5 and F6. I am in a dim room so they should auto turn on.
I am afraid that I may have overheated the computer, but I was wondering if anyone has any advice. I was thinking of opening the back up but I dont have a small enough screwdriver at the momment. I also tried doing the "top -u -s3" command to check cpu% and my highest one is Firefox around 10-15%.
Any help would be appreciated. I'm thinking this is gonna require a look at the Apple Store, however I am an out of state college student and I'm not returning home for another week and I need my computer for assignments.
Sorry for the wall of text. Thanks in advance.
P.S. My computer is up to date.

SMC reset works best with anything that relies on power for the machine. When it comes to batteries SMC reset and PRAM usually do the trick. Also a lot of people miss this, do not plug on the top plugs use the lower plug.
As for the temperature on the lap, expect a lot of heat, the computers are designed to lay on flat SOLID surfaces. The underbelly on aluminum chassis laptops act as a heatsink. In addition the rubber feet keep the product high enough so air can pass through and help cool the system.
As far as the adapter you can have AppleCare send you without waiting a week for it. If it is an obvious hardware problem they may do an exception for you if you are out of phone support. Highly recommend APP for the phone support. You would have a battery on it's way to your current location in a couple days!

Problem with that: 'MOLKPO+Calibri'.

Similar Messages

Maybe you are looking for