Problem with total page numbers in Scripts

Hi,
I have a problem with total number of pages in the Script.
I have a script of 15 pages.
On every page, I am using &PAGE& of &SAPSCRIPT-FORMPAGES(C)&.
Problem is : I am getting only single digit for SAPSCRIPT-FORMPAGES as long as the page number remains in single digit - like -
1 of 1
2 of 1
3 of 1... till 9 of 1.
But from 10th page, it is printing :
10 of 15
11 of 15
12 of 15... till 15 of 15.
So, i think the symbol SAPSCRIPT-FORMPAGES(C) is filled with value 15 , but it is prinitng only the first digit '1' for pages 1 to 9 and then printing both the digits '15' for pages from 10 onwards.
So, please help me out in this problem.
Thank you.

Hi Ven,
The CONDENSE option cannot be used on the program icon SAPSCRIPT-FORMPAGES
(C) without an explicit length specification: This symbol is
only replaced with a value after the form has been completely edited, as the
total number of pages of a form is first known in the program function
END_FORM or CLOSE_FORM. However, the size of the symbol (number of
characters) is reserved correctly when the symbol first occurs, with the
current page number. Therefore, only one character is reserved for option C
(CONDENSE) on pages 1-9, two characters on pages 10-99, and so on.
If you are sure that the total number of pages doesn't cross 99(i.e 2-digit number), then use the FORM pages as SAPSCRIPT-FORMPAGES(2CZ).
Here Z will suppress the leading zeros, for the total number of pages.
Hope this information would be useful for you.
Reward points if this is useful.
Pavan.

Similar Messages

ID CS5 - problem with 2 page numbers in the same page

Until InDesign CS3 I could put 2 page numbers in one page, either in document pages or in master pages, using 2 linked text frames, one in each of the pages I wanted to see the numbers. And this worked fine!
In CS4, this stopped working in master pages. I had to override the text frames from master pages (ctrl/cmd + shift click on the text frames) to get this working, and I had to this in ALL document pages.
I was hoping this problem was solved in CS5 but... the problem got worst!!! Now, not only I have to override the text frames, but I have to erase the markers and put them there again. Which means I have to put page markers individually in ALL pages.
I wonder if there is a new way to do this? Does any one have the answer?...
If not... I really really hope someone from Adobe reads this forum and try to solve the problem, because this is a great inconvenience...
Thanks for any help

Hi, Jongware,
It is a bug since CS4, agravated in CS5, because until CS3 it worked very well.
In fact, it worked through out a lot of pages. I think this was not created only to pages side-by-side but in fact to those articles that continued several pages ahead. So, in a magazine, when one has to break an article and continue this article in other page, one could (and still can) put a text frame in the of the first part of the article and type "Continue on [next page marker]". Then link this text frame with a new text frame on the page where the article continues, (on top of 2nd part of the article) and type "Continued from [previous page marker]".
This situation – where text frames are in the document pages – still works fine.
The problem is when this is a constant and you want to put it in master pages, and now it simply does't work. I mean, when every odd or even pages have both numbers. For me, it's a major problem, because several of my clients just love this!
Is anyone of Adobe reading this? Are you going to help us and fix this problem, please?...

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Printing bug with logical page numbers

I have a PDF file set up with logical page numbering. If I want to print page 7-10 and type this in the Pages field, Reader prints physical pages 7 through 10 from the PDF file instead of logical page 7-10. I tried it in Reader X and XI and the problem occurs in both. I am pretty sure it worked in early versions, but I don't know what version it stopped working on. Is this a known issue?
Rick

Could it be that this file contains duplicate page labels? Can you share the file?

Open parameters with roman page numbers

Trying to use #page=nn to go to a specific page in a PDF file. My code is an html http link and the PDF file is on a server elsewhere. #page=nn works fine with arabic page numbers, but not with roman numerals used in the PDF file preface, foreword, etc. The PDF file shows "i", "ii", etc. in the Adobe Reader page box. There is "(1 of 8)" shown to the right of that box. I can use a keyboard shortcut (shift-ctrl-n) to search for ii and it correctly goes to the second page. Uppercase (II) does not work, however. I tried #page="ii" in an attempt to preserve the lowercase parameter but no luck.
Any ideas? Thank you.
Ralph

This forum is not meant as an access hub to ask people write you free custom scripts.
.. But -- fortunately for you, this particular question was interesting enough to spend 5 minutes on. It turned out to be as easy as I initially thought:
app.findGrepPreferences = null;
app.findGrepPreferences.findWhat="\\d+[-~=]\\d+";
r = app.activeDocument.findGrep(true);
while (r.length)
    t = r.pop();
    s = t.contents.split(/\D/);
    s[1] = s[0].substr(0,s[0].length-s[1].length)+s[1];
    s[0] |= 0; s[1] |= 0;
    u = s[0];
    while (s[0]++<s[1])
        u+=', '+s[0];
    t.contents = u;

I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
== This happened ==
Not sure how often
== i use to search any page like movies or etc

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

2 spreads with same page numbers

Hi everyone,
I'm having an issue with indesign: I have 2 spreads in the document with the same page numbers (even in the pages panel).
I created one new spread and placed it before the other.
This is a problem since the page numbering inherit this.
I tried to solve it myself, then I googled the problem, but i found nothing.
Anyone knows how to solve it?
Thanks!

The small black triangle above the second page 4 is a new section marker. In the pages panel highlight the second page 4 then select numbering and section options and change the start page to 6.
Oops I sent this before I saw your second post.

Having problems with a message saying a script in this movie is causing adobe to run slowly if it continues to run, your computer may become unresponsive

Having problems with a message saying,A script in this movie is causing adobe flash player to run slowly if it continues to run, your computer may become unresponsive. Do you want to abort script. And my system seems to freeze. What can I do

Here is the download page for Click-to-PlugIn:
http://hoyois.github.com/safariextensions/clicktoplugin/

How to set page numbers in scripts

Hi,
i want page numbers at bottom of page,
please tell me how to set page numbers in scripts?

Hi,
In footer
use this
&PAGE& / &SAPSCRIPT-FORMPAGES&
&PAGE& of &SAPSCRIPT-FORMPAGES&
reward if it helps..
regards,
Omkar.

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Getting chapter numbers to show up in the TOC with the page numbers...

First, thank you all very much for posting replies. This forum is wonderful.
I have a doc that needs to have the chapter numbers show up with the page numbers in the TOC.
I insert the <$chapnum> and <$currentpagenum> in the footer, and I get 1-1 to show up.
To include the 1-1 in the TOC, do I have to edit the Reference Page, or is there another way.
Thank you SO much for your help!!!!!!!!!!!!!

Thank you VERY much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Got it to work. However, my TOC will not update with the new building blocks.
Have played and played with it. Any suggestions?
Thank you!!!!!!!!!!!!!!!!

Whats the problem with this page

hi,
i have problem with this page
page
it loading the video but not showing any content related to
the video.
i use
[code]
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var video:Video = new Video();
video.attachNetStream(netStr);
addChild(video);
video.x=201;
video.y=125;
function getError(e:AsyncErrorEvent) {
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205,378,percent * 4.32,5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
[/code]

here is the full code
and i have an error saying:
ArgumentError: Error #2004: One of the parameters is
invalid.
at flash.display::Graphics/drawRect()
at VIDEOPLAYER_fla::MainTimeline/fileLoaded()
[code]
import flash.display.Sprite;
import flash.net.NetConnection;
import flash.display.SimpleButton;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.media.Video;
import flash.events.MouseEvent;
import flash.events.KeyboardEvent;
import flash.events.Event;
import flash.display.Graphics;
import flash.text.*;
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var URL:String =
"/hakans/videos/BEDUK_AUTOMATIK00.flv?start=";
var offset:uint = 1048576;
var tamURL:String = URL + offset;
trace(tamURL);
var video:Video = new Video();
video.attachNetStream(netStr);
video.x=201;
video.y=125;
netCon = new NetConnection();
netCon.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netCon.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
securityErrorHandler);
function netStatusHandler(event:NetStatusEvent):void {
switch (event.info.code) {
case "NetConnection.Connect.Success":
connectStream();
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video: " + tamURL);
break;
function connectStream():void {
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
asyncErrorHandler);
netStr.play(tamURL);
addChild(video);
function securityErrorHandler(event:SecurityErrorEvent):void
trace("securityErrorHandler: " + event);
function asyncErrorHandler(event:AsyncErrorEvent):void {
// ignore AsyncErrorEvent events.
function getError(e:AsyncErrorEvent) {
var myTextBox:TextField = new TextField();
var myText:String = "Bytes loaded";
function TextWithImage()
addChild(myTextBox);
myTextBox.text = myText+netStr.bytesLoaded;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma >------------------*/
stage.addEventListener( KeyboardEvent.KEY_DOWN,
keyPressHandler );
function keyPressHandler( e:KeyboardEvent ):void {
// if the spaceBar is pressed then toggle video play/pause
if( e.charCode == 32 ) {
netStr.togglePause();
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
pause_btn.addEventListener(MouseEvent.MOUSE_DOWN,
pauseVideo);
function pauseVideo(e:MouseEvent) {
netStr.pause();
stop_btn.addEventListener(MouseEvent.MOUSE_DOWN, stopVideo);
function stopVideo(e:MouseEvent) {
netStr.pause();
netStr.seek(0);
fastforward_btn.addEventListener(MouseEvent.MOUSE_DOWN,doForward);
function doForward(e:MouseEvent):void {
var f:int = 1; //you can schange the skipping time here
netStr.pause();
netStr.seek(netStr.time + f);
netStr.resume();
rewind_btn.addEventListener(MouseEvent.MOUSE_DOWN,doRewind);
function doRewind(e:MouseEvent):void{
var x:int = 2;
netStr.pause();
netStr.seek(netStr.time - x);
netStr.resume();
fullscreen_btn.addEventListener(MouseEvent.MOUSE_DOWN,doFull);
function doFull(e:MouseEvent):void{
stage.displayState = StageDisplayState.FULL_SCREEN;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma / >------------------*/
/*--------------< Video İçin Yükleme Bilgi
Çubuğu >------------------*/
var loaderBg:Sprite = new Sprite();
loaderBg.graphics.beginFill(0xc78f8e);
loaderBg.graphics.drawRect(205 , 378 , 430 , 5);
loaderBg.graphics.endFill();
addChild(loaderBg);
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205 , 378 , percent * 4.32 , 5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
/*--------------< Video İçin Yükleme Bilgi
Çubuğu / >------------------*/
/*--------------< Video Meta Bilgileri
>------------------*/
var metaObject:Object = new Object();
netStr.client = metaObject;
metaObject.onMetaData = getMetaInformation;
var lengthOfVideo:Number = 0;
function getMetaInformation(e:Object):void {
lengthOfVideo = e.duration;
trace("Genişlik :" + e.width);
trace("Yükseklik :" + e.height);
/*--------------< Video Meta Bilgileri /
>------------------*/
/*--------------< Videonun Durum Çubuğu
>------------------*/
//may cause problem part
var GraphicsExample :Sprite = new Sprite();
var size:uint = 10;
var bgColor:uint = 0x999999;
var borderColor:uint = 0x999999;
var borderSize:uint = 0;
var cornerRadius:uint = 9;
var gutter:uint = 5;
var dragBar:Sprite = new Sprite();
var halfSize:uint = Math.round(size / 2);
dragBar.graphics.beginFill(bgColor);
dragBar.graphics.lineStyle(borderSize, borderColor);
dragBar.graphics.drawCircle(halfSize, halfSize, halfSize);
dragBar.graphics.endFill();
dragBar.x=201;
dragBar.y=376;
addChild(dragBar);
var drag:Boolean = false;
this.addEventListener(Event.ENTER_FRAME, setDragBar);
function setDragBar(e:Event) {
if (!drag) {
dragBar.x = ((netStr.time / lengthOfVideo) * 429) + 201;
/*--------------< Videonun Durum Çubuğu /
>------------------*/
/*--------------< Videonun Kaydırma Çubuğu
>------------------*/
dragBar.addEventListener(MouseEvent.MOUSE_DOWN,
startDragging);
dragBar.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
dragBar.buttonMode = true;
var rect:Rectangle = new Rectangle(205,378,429,0);
function startDragging(e:MouseEvent) {
drag = true;
netStr.pause();
dragBar.startDrag(false,rect);
function stopDragging(e:MouseEvent) {
dragBar.stopDrag();
drag = false;
netStr.resume();
this.addEventListener(Event.ENTER_FRAME, reSetVideo);
function reSetVideo(e:Event) {
if (drag) {
netStr.seek(Math.floor(((dragBar.x-201) / 429) *
lengthOfVideo ));
/*--------------< Videonun Kaydırma Çubuğu
/ >------------------*/
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler1);
function netStatusHandler1(e:NetStatusEvent):void
switch (e.info.code)
case "NetStream.Seek.InvalidTime":
trace("You have seeked too far ahead, the video hasn't fully
loaded yet");
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video");
break;
/*--------------< Video Ses Kontrolü
>------------------*/
sound_btn.addEventListener(MouseEvent.MOUSE_DOWN, setSound);
var checkSound:Boolean = true;
var soundTrans:SoundTransform = new SoundTransform();
function setSound(e:MouseEvent) {
if (checkSound) {
soundTrans.volume = 0;
checkSound = false;
} else {
soundTrans.volume = 1;
checkSound =true;
netStr.soundTransform = soundTrans;
/*--------------< Video Ses Kontrolü /
>------------------*/
[/code]

Problem with applescript for Numbers

I am new to Applescript and am haveng problems with what seems to be a pretty simple task. I want to check the value of each cell to test for a certain condition and then based on the results increment another cell. I keep getting the following error:
error "Numbers got an error: Can’t make {4, 5} into type integer." number -1700 from {4, 5} to integer
Here is my script:
tell application "Numbers" to tell document 1 to tell sheet "Sheet 1" to tell table "Table 1"
          set fNineStart to 4
          set fNineEnd to 12
          set bNineStart to 14
          set bNineEnd to 22
          repeat with irow from 8 to 40
                    set skinscount to 0
                    repeat with jcol from fNineStart to fNineEnd
                              set minscore to value of cell (jcol & 5)
                              if value of cell (jcol & irow) is equal to minscore and the value of cell (jcol & 6) is equal to 1 then
                                        set skinscount to skinscount + 1
                              end if
                    end repeat
                    set the value of cell (27 & irow) to skinscount
          end repeat
end tell
Here is the spreadsheet:
Name
1
2
3
4
5
6
7
8
9
Front
Nine
10
11
12
13
14
15
16
17
18
Back
Nine
Total
Net
ESC
score
Skins
Par
4
4
4
5
3
4
5
3
4
36
4
5
3
4
5
3
4
4
4
36
birdie
3
3
3
4
2
3
4
2
3
27
3
4
2
3
4
2
3
3
3
27
eagle
2
2
2
3
1
2
3
1
2
18
2
3
1
2
3
1
2
2
2
18
low score
3
4
4
3
3
4
5
3
4
4
4
3
4
5
3
4
4
4
# of people with min.
1
3
1
1
1
2
4
1
2
16
2
1
2
3
3
2
1
4
2
Skins
HCP
Joe
y
3
3
4
5
5
3
4
5
4
5
38
5
5
4
4
5
3
4
4
5
39
77
74
Bill
y
7
5
4
5
5
4
4
5
4
4

Hi fairchild.bill,
Real experts will I hope chime in, but I think one problem is the way you are referring cells:
Instead of:
value of cell (jcol & irow)
I think you need to use something like:
value of cell irow of column jcol
And
value of cell jcol of row irow
Studying examples of scripts for Numbers 3 at macosxautomation.com may give you some ideas on this.
SG

Problem with total page numbers in Scripts

Similar Messages

Maybe you are looking for