Problem with User Command in alv report

Hi
I have developed a ALV grid report with drill down capability to transaction code for user command. I am having a trouble with this.
CASE ucomm.
    WHEN '&IC1'.
      CLEAR: wa_import.
      IF selfield-fieldname EQ 'ANLN1'.
        READ TABLE t_import INTO wa_import INDEX selfield-tabindex.
        SET PARAMETER ID 'BUK' FIELD wa_import-bukrs.
        SET PARAMETER ID 'ANl' FIELD wa_import-anln1.
        CALL TRANSACTION 'AW01N'.
      ENDIF.
here my parameter ids are showing the values but when i call the transaction i am not getting the actual asset numbers.
Can someone help me out this
Thanks

Hi,
add the AND SKIP FIRST SCREEN...addition..
CALL TRANSACTION 'AW01N' AND SKIP FIRST SCREEN.
Thanks
Naren

Similar Messages

PROBLEM WITH USER COMMAND AT SIMPLE REPORT

HII FRNDS
MY PROBLEM IS
WHEN I AM BRANCHING TO A LIST REPORT FROM MY ALV REPORT BY USING LEAVE TO LIST-PROCESSING . THEN IN MY LIST REPORT I AM HAVING 2 MORE CUSTOMIZED BUTTON . BUT THE THING IS THAT I AM NOT ABLE TO MAKE THAT BUTTON FUNCTION .
CAN ANY BODY HELP ME WITH HOW TO MAKE THAT BUTTON WORK IN THE SIMPLE REPORT . I HAVE USED AT USER COMMAND IN THE BEGINING OF REPORT BUT STILL ITS NOT WORKING .
THANKING YOU
ROHIT

HII FRNDS THIS IS THE CODE
CASE R_UCOMM.
    WHEN 'DISPLAY1'.
      LOC_INDEX = 1 .
      SET PF-STATUS 'STATUS' EXCLUDING 'DISPLAY1'.
      LOOP AT INT_OUTPUT INTO WA_OUTPUT
                         WHERE CHECKBOX = WC_MARKED.
        APPEND WA_OUTPUT TO INT_DISPLAY .
      ENDLOOP.
      LEAVE TO LIST-PROCESSING .
      PERFORM F9100_DISPLAY_DETAILS USING LOC_INDEX.
ENDCASE.
AT USER-COMMAND .
CASE SY-UCOMM.
WHEN 'BACK'.
BREAK-POINT.
       PERFORM F9100_DISPLAY_DETAILS USING LOC_INDEX.
ENDCASE.
THE PERFORM F9100 DISPLAYES THE LIST REPORT . THERE ARE NO SPELLING ERRORS FRNDS .

Problem with Page Break In ALV Report

Hi
I have got a problem in my ALV report. I have a checkbox in the user input screen where users decide whether they want a page break or not in the print preview (or print) page. Now i also have the option to have layout name in the input screen. so If i leave the layout box empty the check or not check of page break works fine. but if use a save layout name in the layout box the add check box doesn't work anymore. If i have a layout name in the layout box it doesn't matter whether i have checked for page break or not it does the same thing.(in one report it always puts the page breaked)
Any ideas where to look for the error?
here is the code for the page break. Opt5 is the check box.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'PERNR'.
ls_sort-subtot    = 'X'.
IF OPT5 = 'X'.
   ls_sort-GROUP = '*'.
ENDIF.
append ls_sort to pt_sort.
ls_sort-subtot    = ' '.
ls_sort-GROUP = ''.

Never mind it was acting like the page break was not working because the layout was saved with the page break on/OFF.

Problem with subtotal calculation in ALV reports

Hi All,
   I am doing one program for calculating subtoals in ALV . For this i want to display subtotal text at each envey subtotal 's row.
For that i have created one form 'SUB_SUBTOT_TEXT' and it has given to IT_EVENTS-FORM. But SUB_SUBTOT_TEXT Form is not called by IT_EVENTS event.
what are all the mandatories for displaying subtotal text.
Can any one please help me.
Thanks in Advance.

Hi Sree,
*& Table declaration
&----TABLES: ekko.&----
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV&----
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.&----
*& Type declaration
&----* Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
       ebeln TYPE char30, " Document no.
       ebelp TYPE ebelp,   " Item no
       matnr TYPE matnr,   " Material no
       matnr1 TYPE matnr,   " Material no
       werks TYPE werks_d, " Plant
       werks1 TYPE werks_d, " Plant
       ntgew TYPE entge,   " Net weight
       gewe   TYPE egewe,   " Unit of weight
       END OF x_data.&----
*& Internal table declaration
DATA:* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.&----
*& Work area declaration
&----DATA:
wa_ekko TYPE x_data,
wa_layout     TYPE slis_layout_alv,
wa_events         TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.&----
*& Constant declaration
&----CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.&----
*& Start-of-selection event
&----START-OF-SELECTION.* Select data from ekpo
SELECT ebeln " Doc no
         ebelp " Item
         matnr " Material
         matnr " Material
         werks " Plant
         werks " Plant
         ntgew " Quantity
         gewei " Unit
         FROM ekpo
         INTO TABLE i_ekpo
         WHERE ebeln IN s_ebeln
         AND ntgew NE '0.00'. IF sy-subrc = 0.
    SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.* To build the Page header
PERFORM sub_build_header.* To prepare field catalog
PERFORM sub_field_catalog.* Perform to populate the layout structure
PERFORM sub_populate_layout.* Perform to populate the sort table.
PERFORM sub_populate_sort.* Perform to populate ALV event
PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
PERFORM sub_alv_report_display.
*&      Form sub_build_header
      To build the header
      No Parameter
FORM sub_build_header .* Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.* Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
         l_date.ENDFORM.                    " sub_build_header
*&      Form sub_field_catalog
      Build Field Catalog
      No Parameter
FORM sub_field_catalog .* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:     '01' '01' 'EBELN' 'I_EKPO' 'L'
     'Doc No'(003) ' ' ' ' ' ' ' ',     '01' '02' 'EBELP' 'I_EKPO' 'L'
     'Item No'(004) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR' 'I_EKPO' 'L'
     'Material No'(005) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR1' 'I_EKPO' 'L'
     'Material No'(005) ' ' ' ' ' ' ' ',
     '01' '04' 'WERKS' 'I_EKPO' 'L'
     'Plant'(006) 'X' 'X' ' ' ' ',     '01' '04' 'WERKS1' 'I_EKPO' 'L'
     'Plant'(006) ' ' ' ' ' ' ' ',     '01' '05' 'NTGEW' 'I_EKPO' 'R'
     'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.                    " sub_field_catalog&----
*&     Form sub_fill_alv_field_catalog
*&     For building Field Catalog
*&     p_rowpos   Row position
*&     p_colpos   Col position
*&     p_fldnam   Fldname
*&     p_tabnam   Tabname
*&     p_justif   Justification
*&     p_seltext Seltext
*&     p_out      no out
*&     p_tech     Technical field
*&     p_qfield   Quantity field
*&     p_qtab     Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos    TYPE sycurow
                                        p_colpos    TYPE sycucol
                                        p_fldnam    TYPE fieldname
                                        p_tabnam    TYPE tabname
                                        p_justif    TYPE char1
                                        p_seltext   TYPE dd03p-scrtext_l
                                        p_out       TYPE char1
                                        p_tech      TYPE char1
                                        p_qfield    TYPE slis_fieldname
                                        p_qtab      TYPE slis_tabname.* Local declaration for field catalog
DATA: wa_lfl_fcat    TYPE slis_fieldcat_alv. wa_lfl_fcat-row_pos        = p_rowpos.     "Row
wa_lfl_fcat-col_pos        = p_colpos.     "Column
wa_lfl_fcat-fieldname      = p_fldnam.     "Field Name
wa_lfl_fcat-tabname        = p_tabnam.     "Internal Table Name
wa_lfl_fcat-just           = p_justif.     "Screen Justified
wa_lfl_fcat-seltext_l      = p_seltext.    "Field Text
wa_lfl_fcat-no_out         = p_out.        "No output
wa_lfl_fcat-tech           = p_tech.       "Technical field
wa_lfl_fcat-qfieldname     = p_qfield.     "Quantity unit
wa_lfl_fcat-qtabname       = p_qtab .      "Quantity table IF p_fldnam = 'NTGEW'.
    wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.                    " sub_fill_alv_field_catalog&----
*&      Form sub_populate_layout
      Populate ALV layout
      No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM.                    " sub_populate_layout&----
*&      Form sub_populate_sort
      Populate ALV sort table
      No Parameter
FORM sub_populate_sort .* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort&----
*&      Form sub_get_event
      Get ALV grid event and pass the form name to subtotal_text
      event
      No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.* Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.                    " sub_get_event&----
*&      Form sub_alv_report_display
      For ALV Report Display
      No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM.                    " sub_alv_report_display&----
      FORM sub_alv_top_of_page
      Call ALV top of page
      No parameter
----FORM sub_alv_top_of_page.                                   "#EC CALLED* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_alv_top_of_page.
ENDFORM.                    "alv_top_of_page&----
*&      Form subtotal_text
      Build subtotal text
      P_total Total
      p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
    p_subtot_text-display_text_for_subtotal
    = 'Material level total'(009).
ENDIF.* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
    p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM.                    "subtotal_text
Hopes its helpful.
Regards,
Raj.

USER-Command at ALV report.

Hi Guys,
I've created one ALV report displaying SALES ORDER created.My requirement is if I click on SALES Document no it should take me into VA03(sales orde display) transaction so that I can see all the data related for that document no. I have used BAPI .

Hi guys,
I have written this code but still it is not taking me into VAO3 Transaction. What else I should write?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_BUFFER_ACTIVE          = 'X'
           I_BACKGROUND_ID          = 'ALV_BACKGROUND'
            I_CALLBACK_PROGRAM       = L_REPID
           I_CALLBACK_PF_STATUS_SET = L_STATUS
            I_CALLBACK_USER_COMMAND = L_USER_COMMAND
          I_STRUCTURE_NAME         = 'VBUK'
           IS_LAYOUT                = LF_LAYOUT
            IT_FIELDCAT              = LF_FIELDCAT[]
          IT_EXCLUDING             =
           IT_SPECIAL_GROUPS        = LF_SP_GROUP
          I_DEFAULT                = 'X'
           I_SAVE                   = L_SAVE
           IS_VARIANT               = L_VARIANT
           IT_EVENTS                = LF_EVENTS[]
          I_SCREEN_START_COLUMN    = 0
          I_SCREEN_START_LINE      = 0
          I_SCREEN_END_COLUMN      = 0
          I_SCREEN_END_LINE        = 0
    IMPORTING
          E_EXIT_CAUSED_BY_CALLER =
          ES_EXIT_CAUSED_BY_USER   =
       TABLES
            T_OUTTAB                 = IT_HEADER .
FORM L_USER_COMMAND USING vl_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
CASE vl_ucomm.
    WHEN '&IC1'.
      IF rs_selfield-fieldname = 'DOC_NO'
      OR rs_selfield-fieldname = 'SO_KUNNR' .
      SET PARAMETER ID 'AUN' FIELD rs_selfield-VALUE.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN OTHERS.
   EXIT.
ENDCASE.
ENDFORM.

How to use AT LINE-SELECTION and AT USER-COMMAND in one report????

Dear all,
I have a problem in reports I want to use AT USER-COMMAND.and AT LINE-SELECTION.both in the one report.
But as soon as I use SET PF-STATUS my AT LINE-SELECTION event stop workingand only AT USER-COMMAND is working.
How can I use both of them in one report for your reference I am giving my test program below.
REPORT ZTEST111 .
SET PF-STATUS '100'.
DO 10 TIMES.
WRITE:/ SY-INDEX.
HIDE SY-INDEX.
ENDDO.
START-OF-SELECTION.
AT LINE-SELECTION.
MESSAGE I002(SY) WITH SY-INDEX.
AT USER-COMMAND.
MESSAGE I002(SY) WITH 'USER COMMAND'.
END-OF-SELECTION.
Thanks in advance
Sachin Gautam

hi
Syntax
AT USER-COMMAND.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named abap.lst in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel

AT LINE SELECTION AN AT USER-COMMAND IN ONE REPORT

hiiii friends.....
hw can i go for both at line selection an at user comond in one report....
ie if double click on basic list it should shw sm output an when i choose menu optoin it should perform sm other output......

You need to crate a PF-Status and in the PF-staus you need to include some essentials buttons and the button for your list on the USER-COMMAND.
Say,
BACK
EXIT
CANC
PICK ... should be assigned to F2 .. to work with LINE-SELECTION.
NEW_LIST ... for USER-COMMAND
In your report:
START-OF-SELECTION.
SET PF-STATUS 'Z_OWN'.
AT LINE-SELECTION.
WRITE : 'I AM LINE SELECTION'.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'NEW_LIST'.
WRITE / 'I AM CALLED FROM USER COMMAND'.
ENDCASE.
Regards,
Naimesh Patel

User command in ALv

how to handle user command in alv grid?
if we want to select only one row, but we get a table from calling method
get_selected_rows.
is there any method or way of getting a single row which is selected?

Hi,
This method indeed returns the table but only with the selected rows. Therefore when you select only one row, it will contain only one entry. For this use second parameter of the method ET_ROW_NO as the first one is obsolete. It will contain indexes of the selected rows.
Note!
You must use one of the these selection modes (A, C, D) in this case. The default one is B, so you have to change it in layout structure.
layout_structure-sel_mode = 'A'. "i.e.
See possible selection modes [here|http://help.sap.com/saphelp_erp2004/helpdata/en/ef/a2e9eff88311d2b48d006094192fe3/frameset.htm]
Regards
Marcin

Problem with PDF extract in a report

Hi guys,
We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
Export excel works fine for all cases.
I am assuming it has got something to do with the way the system handles the cache for PDF export.
I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening the report for the first time the query does not get executed automatically.
Any help on this would be highly appreciated.
Thanks and Regards,
immanuel

Hi Immanuel,
Have you tried clearing the cache? My guess is, it is probably a defect.
Regards,
Vikram

Problem with Grand total in Crystal report xi

Post Author: eshwar_polawar
CA Forum: Crystal Reports
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Post Author: eshwar_polawar
CA Forum: Crystal Reports
eshwar_polawar:
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Problems with 'df' command

Hello folks,
I'm having some problems with df command:
Output:
[nenemfromhell@myhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 999M 4.0K 999M 1% /dev
none 999M 4.0K 999M 1% /dev
/dev/sda8 133G 125G 2.0G 99% /media/DU
shm 999M 0 999M 0% /dev/shm
First: It doesn't show my root partition, but i can check it in gparted.
Second: /dev/sda8 is a NTFS partition that its size is 12GB
Thanks.
Last edited by nenemfromhell (2012-01-20 03:37:30)

Please include some detail as to how you solved the problem: https://wiki.archlinux.org/index.php/Fo … way_Street

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Problem with users disabling ARD client service

I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.

First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

Problem with user mapping

Hello,
We got a problem with user-mapping to a SAP system.
We create a SAp system, and an alias to this system.
We add a user mapping for the administrator (user, not group). Check for connector is OK.
Now, we make the same user-mapping for a group.
if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
</b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
So, it seem that the alias is only visible for an admin.
does any one got an idea ? we are on SP14, Linux.
regards
Guillaume PATRY

HI Guillaume,
The user mapping is available for both Admin as well as end users.
Open your system from System Administration>System Configuration>System Landscape.
In the property editor,in dropdown for property category,
select the logon method as UID?password and User Mapping type to admin/user.
Then you can create a Group,map the system alias for this group and add users to this group.
Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
Hope,this resolves your problem.
Regards,
Siddhartha

Problem with User Command in alv report

Similar Messages

Maybe you are looking for