PROBLEM WITH USER COMMAND AT SIMPLE REPORT

HII FRNDS
MY PROBLEM IS
WHEN I AM BRANCHING TO A LIST REPORT FROM MY ALV REPORT BY USING LEAVE TO LIST-PROCESSING . THEN IN MY LIST REPORT I AM HAVING 2 MORE CUSTOMIZED BUTTON . BUT THE THING IS THAT I AM NOT ABLE TO MAKE THAT BUTTON FUNCTION .
CAN ANY BODY HELP ME WITH HOW TO MAKE THAT BUTTON WORK IN THE SIMPLE REPORT . I HAVE USED AT USER COMMAND IN THE BEGINING OF REPORT BUT STILL ITS NOT WORKING .
THANKING YOU
ROHIT

HII FRNDS THIS IS THE CODE
CASE R_UCOMM.
    WHEN 'DISPLAY1'.
      LOC_INDEX = 1 .
      SET PF-STATUS 'STATUS' EXCLUDING 'DISPLAY1'.
      LOOP AT INT_OUTPUT INTO WA_OUTPUT
                         WHERE CHECKBOX = WC_MARKED.
        APPEND WA_OUTPUT TO INT_DISPLAY .
      ENDLOOP.
      LEAVE TO LIST-PROCESSING .
      PERFORM F9100_DISPLAY_DETAILS USING LOC_INDEX.
ENDCASE.
AT USER-COMMAND .
CASE SY-UCOMM.
WHEN 'BACK'.
BREAK-POINT.
       PERFORM F9100_DISPLAY_DETAILS USING LOC_INDEX.
ENDCASE.
THE PERFORM F9100 DISPLAYES THE LIST REPORT . THERE ARE NO SPELLING ERRORS FRNDS .

Similar Messages

Problem with User Command in alv report

Hi
I have developed a ALV grid report with drill down capability to transaction code for user command. I am having a trouble with this.
CASE ucomm.
    WHEN '&IC1'.
      CLEAR: wa_import.
      IF selfield-fieldname EQ 'ANLN1'.
        READ TABLE t_import INTO wa_import INDEX selfield-tabindex.
        SET PARAMETER ID 'BUK' FIELD wa_import-bukrs.
        SET PARAMETER ID 'ANl' FIELD wa_import-anln1.
        CALL TRANSACTION 'AW01N'.
      ENDIF.
here my parameter ids are showing the values but when i call the transaction i am not getting the actual asset numbers.
Can someone help me out this
Thanks

Hi,
add the AND SKIP FIRST SCREEN...addition..
CALL TRANSACTION 'AW01N' AND SKIP FIRST SCREEN.
Thanks
Naren

How to use AT LINE-SELECTION and AT USER-COMMAND in one report????

Dear all,
I have a problem in reports I want to use AT USER-COMMAND.and AT LINE-SELECTION.both in the one report.
But as soon as I use SET PF-STATUS my AT LINE-SELECTION event stop workingand only AT USER-COMMAND is working.
How can I use both of them in one report for your reference I am giving my test program below.
REPORT ZTEST111 .
SET PF-STATUS '100'.
DO 10 TIMES.
WRITE:/ SY-INDEX.
HIDE SY-INDEX.
ENDDO.
START-OF-SELECTION.
AT LINE-SELECTION.
MESSAGE I002(SY) WITH SY-INDEX.
AT USER-COMMAND.
MESSAGE I002(SY) WITH 'USER COMMAND'.
END-OF-SELECTION.
Thanks in advance
Sachin Gautam

hi
Syntax
AT USER-COMMAND.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named abap.lst in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel

AT LINE SELECTION AN AT USER-COMMAND IN ONE REPORT

hiiii friends.....
hw can i go for both at line selection an at user comond in one report....
ie if double click on basic list it should shw sm output an when i choose menu optoin it should perform sm other output......

You need to crate a PF-Status and in the PF-staus you need to include some essentials buttons and the button for your list on the USER-COMMAND.
Say,
BACK
EXIT
CANC
PICK ... should be assigned to F2 .. to work with LINE-SELECTION.
NEW_LIST ... for USER-COMMAND
In your report:
START-OF-SELECTION.
SET PF-STATUS 'Z_OWN'.
AT LINE-SELECTION.
WRITE : 'I AM LINE SELECTION'.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'NEW_LIST'.
WRITE / 'I AM CALLED FROM USER COMMAND'.
ENDCASE.
Regards,
Naimesh Patel

Problem with PDF extract in a report

Hi guys,
We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
Export excel works fine for all cases.
I am assuming it has got something to do with the way the system handles the cache for PDF export.
I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening the report for the first time the query does not get executed automatically.
Any help on this would be highly appreciated.
Thanks and Regards,
immanuel

Hi Immanuel,
Have you tried clearing the cache? My guess is, it is probably a defect.
Regards,
Vikram

Problem with Grand total in Crystal report xi

Post Author: eshwar_polawar
CA Forum: Crystal Reports
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Post Author: eshwar_polawar
CA Forum: Crystal Reports
eshwar_polawar:
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Problems with 'df' command

Hello folks,
I'm having some problems with df command:
Output:
[nenemfromhell@myhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 999M 4.0K 999M 1% /dev
none 999M 4.0K 999M 1% /dev
/dev/sda8 133G 125G 2.0G 99% /media/DU
shm 999M 0 999M 0% /dev/shm
First: It doesn't show my root partition, but i can check it in gparted.
Second: /dev/sda8 is a NTFS partition that its size is 12GB
Thanks.
Last edited by nenemfromhell (2012-01-20 03:37:30)

Please include some detail as to how you solved the problem: https://wiki.archlinux.org/index.php/Fo … way_Street

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Problem with users disabling ARD client service

I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.

First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

Problem with user mapping

Hello,
We got a problem with user-mapping to a SAP system.
We create a SAp system, and an alias to this system.
We add a user mapping for the administrator (user, not group). Check for connector is OK.
Now, we make the same user-mapping for a group.
if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
</b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
So, it seem that the alias is only visible for an admin.
does any one got an idea ? we are on SP14, Linux.
regards
Guillaume PATRY

HI Guillaume,
The user mapping is available for both Admin as well as end users.
Open your system from System Administration>System Configuration>System Landscape.
In the property editor,in dropdown for property category,
select the logon method as UID?password and User Mapping type to admin/user.
Then you can create a Group,map the system alias for this group and add users to this group.
Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
Hope,this resolves your problem.
Regards,
Siddhartha

Problem with user number

Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right, appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
Waiting for an answer, thank you.

Hello scricciolina90
Welcome To Support Forums
On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Issue with users trying to save reports to thier Documents on one drive.

I am working
on a 2013 SharePoint environment and users who use Power View reports. I
have a user who can create reports on a site I have set up (no problems
there). They can also save reports to PowerPivot Gallery they have added
in their Newsfeed for their personal site (no problems here). The problem
is when they try to save the report and go to Documents on one Drive it fails
with below error message. I am an admin but can save just fine to my
documents. I know the error shows an access issue but not sure where or
how to resolve this issue for users. <o:p></o:p>
P.S. the
issue happens before they even save button it happens when they see the My
Documents and try to open it. Again it is there personal SharePoint site
so not sure why they would not have access.<o:p></o:p>
SoapAction: ListChildren
HttpStatus: 500
ServerErrorCode: rsAccessDenied
ServerError: <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsAccessDenied</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3412.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsAccessDenied" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
here is actual screen shot
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:7in;height:426.75pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\KEN~1.CRA\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
Ken Craig

Hi Ken,
It's strange that the User Profile Service Application is not available there. Please use PowerShell to check it, and you can run the command below:
Get-SPServiceApplication | where-object{$_.DisplayName -like 'User Profile*'}
Please ensure you are connecting to the correct farm, and open PowerShell with administrator permission. Meanwhile, add a test user in your Active Directory, and test to see whether the user's My Site can be created.
If the User Profile Service Application can be listed by PowerShell, and the new user's My Site can be created, there might be an UI issue in your Central Administration. Otherwise, you may consider to recreate or restore your User Profile Service Application.
Here are references:
https://technet.microsoft.com/en-us/library/gg985419.aspx
http://sharepoint.stackexchange.com/questions/55087/user-profile-service-application-unable-to-create-a-new-user-profile-service-ap
https://joanneklein.wordpress.com/2011/11/08/recreated-user-profile-service-application-deletes-user-profiles/
Thanks,
Reken Liu

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Problem with JDBC results calling simple stored procedure in VC 7.0

Hi all,
I am building a simple VC model which calls a stored procedure on a JDBC database. I have created the system in the portal, defined the alias and user mapping, the connection test is fine and the VC "find data" lists my bespoke stored procedure.
The stored procedure is :
CREATE PROCEDURE dbo.dt_getBieUsers
AS
select * from dbo.emailuserlink
GO
When I test it using query analyser, it returns 3 records each with the two fields I expect - user and email address.
I drag the model onto the workspace in VC and create an input form ( with just a submit button ). i drag the result port out to create a table. This has no fields in it.
I build and deploy as flex and the app runs, I click the submit button and SUCCESS! I get 3 records in my table each with 2 fields. The data is all correct. The problem with this is the fields are determined at runtime it seems.
I go back to the table and add 2 columns "email" and "address".
i build and deploy and run the app. Again I get 3 records, but this time the contents of all of the rows is not data, but "email" and "address". The data has been replaced by the header texts in all of the rows.
Can anyone help? Why isn't the data being put in my columns as I would expect?
I tried to build and deploy the app as Web Dynpro rather than Flex to see if it was a bug in Flex. The application starts but when I click the submit button to run the JDBC stored procedure I get a 500 Internal Server Error
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry JDBCFunction
    at com.sap.tc.wd4vc.xglengine.XGLEngine.createComponentInternal(XGLEngine.java:559)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstanceFromUsage(XGLEngine.java:362)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstance(XGLEngine.java:329)
    at com.sap.tc.wd4vc.xglengine.wdp.InternalXGLEngine.getCompInstance(InternalXGLEngine.java:167)
    at com.sap.tc.wd4vc.xglengine.XGLEngineInterface.getCompInstance(XGLEngineInterface.java:165)
The JDBC connection I am using has a connection URL of jdbc:sap:sqlserver://localhost;DatabaseName=BIEUSERS
and a driver class of com.sap.portals.jdbc.sqlserver.SQLServerDriver
Can anyone solve my wierd problems?
Cheers
Richard

Hi Richard,
After you drag and drop the data service, right click on it and choose "Test data service". Then click on "Execute" and after you see the result on the right, click on "Add fields" button (inside the same window). Now you'll see that the fields are on the tabel. This is required only for JDBC data services, since this data (how the resultset is built) is not know in DT and it needs to be run firest - then analysed and only then you have to add the fields to the table).
Regards,
Natty

PROBLEM WITH USER COMMAND AT SIMPLE REPORT

Similar Messages

Maybe you are looking for