Problem with versions

I am very new in sql server. I downloaded sql server express 2012. I then downloaded adventureworks sample database. I used the following command to attach the database:
CREATE DATABASE AdventureWorks2012 ON (FILENAME = 'M:\Data\AdventureWorks2012_Data.mdf'), (FILENAME = 'L:\Tlogs\AdventureWorks2012_Log.ldf') FOR ATTACH;
When I execute, I get an error stating that the database is in version 655 and the server only supports version 612 or earlier.
I then execute @@Version. When I do this, I receive a notice stating that I have sql server 2005.
Can you tell me what is happening and what steps I should take.
Larry
l2n
Hello,
I guess you have multiple versions installed on this machine .
Go to start all programs...Can you see both SQL server 2005 and SQL server 2012.If yes then you might have multiple version installed...
Click on sql server 2012 ...SQL server management studio ...Login into that..And then try to run attach query.
If you face issue please report.If you cannot find SQL server 2012 then i guess its not installed.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

Anybody has a problem with version 8.1.3 (12B466)?

Anybody has problems with version 8.1.3 (12B466)?
Any suggestions?
My iphone 5 keeps restarting

No problems here. Maybe it was a bad update.
I assume you have either an iTunes or iCloud backup.
Connect to iTunes on your computer and restore iOS.
This will download (if necessary) and reinstall iOS. After it finishes, go through the setup process and restore from your backup.

Problem with Versions/Auto Save

Something is awfully wrong with Versions on my system. To note, this happened AFTER the 10.7.1 update, but I can't say whether it happened DIRECTLY after the update.
I've already repaired disk permissions using the Recovery Disk.
Here's the problem: on some files (locked or unlocked, by the way) when viewing older versions it doesn't show any preview of the file on the right side -- it's just empty space! When attempting to restore the file it gives the error:
"Unable to revert because an error occurred while trying to open this file's backup version."
Other files would take an eternity to restore -- or even to simply VIEW back versions. It'll give me the spinning beachball of death and after a force quit, the file would be hopelessly corrupted, giving me the error:
"The document xxxxx could not be read. The document does not have a valid format."
Christ.
Even newly-created files sare displaying this problem. I created one just now and it gets stuck on "Retrieving Backup versions from TIME MACHINE"
TIME MACHINE???? I don't USE it! WHERE and WHO gave TM authority to run 'in the background'? That said -- why is it acting funny just NOW? I've turned it off from the beginning and never touched it since. NOW it decides the wreak havoc on my system?
Anyone else having these problems??

Hi Tobias,
Can u just tell us how did u find ur solution..
Thanks & Regards
Sankalp

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Problem with version enabling tables with ric.

Hello,
i have the a problem when i want to version enable tables having ref. int. constraits having delete rule cascade or set null.
Is it possible that i can't version enable the tables because of these constraints? How i could solve this problem if i want to keep the delete rule?
thanks,
Orsi Gyulai

Hi,
We are internally creating a <table_name>_g procedure that transfers privileges to the necessary users. If you have a table with that name, it would explain the error.
When using ignore_last_error, it will skip the statement that is selected from the all_wm_vt_errors view. Sometimes, the statement can be safely skipped, while in other cases it cannot be. This procedure will always eventually complete when it is repeatedly called with ignore_last_error set to true. However in doing so, some required objects or privileges may not exist or be in an invalid state.
In your case, you most likely had to skip the 3 or so statements that dealt with the <table_name>_g procedure. Typically, these statements should not be skipped, but you may or may not see a problem with it due to a number of factors.
The best course of action may be to drop the trigger in a beginDDL/commitDDL session, and then recreate it in a separate session. Of course, only do this after renaming the <table_name>_g table that you have. Unfortunately, there is currently no way of getting around this naming convention.
Thanks,
Ben

Problems with version 11

Since I installed the Itunes 11 version I can no longer print a jewelcase (Cd) and after burning a cd teherie is no index that can be read on the cd...
I know that these two things were abolutely no problem with the version number 10... So who can help me ? Apple ? Thanks !!!

Check for a device driver update for your display adapter; see http://forums.adobe.com/thread/945765

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

I have much problems with version 7.0 three days ago, this doesn´t load pages always says " server no found it" or pages stay on load forever, it besides is so slow. I don´t like this new version. What can i do?

I'm from Colombia, i have used mozilla since 3 years and i nerver had to have problems with it, but this new version is so unstable.
whenever I open a page that aperece:
''''''Servidor no encontrado
Firefox no puede encontrar el servidor en
Compruebe que la dirección no tiene errores de escritura
del tipo ww.ejemplo.com en lugar de
www.ejemplo.com
Si no puede cargar ninguna página, compruebe la conexión
de red de su equipo.
Si su equipo o red están protegidos por un cortafuegos
o proxy, asegúrese de que Firefox tiene permiso
para acceder a la web.''''''
I'm very bored with my mozilla, not what else to do.

This article has troubleshooting information for that error message:
https://support.mozilla.com/kb/Server%20not%20found
Also, it is possible your profile might have become damaged during the upgrade. You could try creating a new one.
Step 1 is to make a backup of your existing profile in a safe place. More information: [https://support.mozilla.com//kb/Backing+up+your+information Backing up your information].
Step 2 is to start Firefox in the Profile Manager and create a new profile. More information: [https://support.mozilla.com/kb/Managing+profiles Managing profiles].
If it works well, step 3 is to move your bookmarks (and other settings if you like) to the new profile. More information: [https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

Are you coming out with a fix to the constant hang problem with version 6? I get a 20 second hang every 15 minutes.

Ever since version 6 was released I have been getting a very bad hang every 15 minutes or so regardless of what I am doing, so I cannot pinpoint the issue. I hope that your new update strategy doesn't create more issues like this that werent an issue with previous versions. I am a web designer and love how I have everything organized in Firefox, which I have favored for years but am getting frustrated and am starting to look at alternative browsers.

Firefox may be doing some maintenance to some files.<br />
Make sure that other cleanup or security software isn't preventing access to files in the Firefox Profile Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Problem with versioning on iPod, backwards compatibility issue with iTunes

i apologize in advance because i'm sure this has been asked time and time again, but i did attempt several searches.
the search function is very muddled and does not narrow down the results very well at all
here's the situation.
from all accounts i've heard lots of people having issues with version 7 of iTunes.
i'm a simple kinda guy who definitely believes in the age old phrase "if it ain't broke, don't fix it."
so i've stuck with v6.
i recently got a new laptop along with my PC. so i downloaded and installed the latest iTunes without thinking twice.
i had completely forgotten about my concerns from hear say about v7 issues.
i plugged in my iPod and it proceeded to completely erase all of the media on it and then load all media that was on my laptop in place of it.
"well that's a cool new feature", i thought.
after my initial frustration wore off, i immediately uninstalled v7, deleted the .itl file and installed v6.
everything was all fine and dandy. v6 works perfectly on the laptop with no hangups.
here comes the issue...
i plug in my iPod to begin rebuilding my media onto it after the completely unauthorized deletion, creditted to iTunes v7.
as it autoplays and iTunes v6 opens i'm prompted with this error:
"The iPod [my ipod] cannot be used because it requires iTunes version 7.0 or later.
Go to www.itunes.com to download the latest version of iTunes."
i've attempted everything i can think of to completely erase my iPod of any "versioning".
- i reset it using the "select/menu" button method
- i reformatted it through XP disk manager
- i reformatted it through context menu in my computer explorer window
- i completely just deleted the "iPod control" directory in the iPod explorer window when clicking through the my computer directory
i'm at a loss.
i cannot figure out a way to get my iPod to function with iTunes v6.
and again, i'm really hoping to avoid going to v7.
iPod information:
2nd generation iPod nano 4GB
thank you in advance for any and all information/advice

I am guessing that you used your iPod enough with iTunes v. 7.x to update the firmware to the latest version. That being the case, reformatting your iPod won't "undo" the firmware update, so your only choice now is to update your iTunes software to v. 7.x.
FWIW, iTunes 7 is a vast improvement over previous versions of iTunes. I use it on both Windows and OS X, and without bugs in both environments.

Problem with versions of JARs

I'm trying to get Webstart working with versioning of my JARs. According to http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/downloadservletguide.html#examples it is possible to either put versions in an xml file for versions on a per- dir basis or put the version in the filenames for versions on per-file basis.
I'd like to use the version in the filenames.
My WAR looks like this:webstart.war
|--index.html
|--client/
   |--client.jnlp
   |--nokeoscore-client.jar
   |--plugin/
      |--organzation-client__V1.jar
   |--img/
      |--nokeos.gif
|--WEB-INF/
   |--web.xml
   |--lib/
      |--jnlp-servlet.jarMy JNLP file:<jnlp spec="1.5+" codebase="$$codebase" href="$$name">
<information>
    <title>NoKeos</title>
    <vendor>FPC</vendor>
    <homepage href="http://www.nokeos.be/"/>
    <description>NoKeos client</description>
    <icon href="img/nokeos.gif"/>
</information>
<security>
    <all-permissions/>
</security>
<resources>
    <j2se version="1.5+"/>
    <jar href="nokeoscore-client.jar"/>
    <jar href="plugin/organization-client.jar" version="1"/>
</resources>
<application-desc main-class="com.fpc.nokeos.core.client.launch.Launcher"/>
</jnlp>When I try Webstart I get:An error occurred while launching/running the application.
Title: NoKeos
Vendor: FPC
Category: Download Error
Unable to load resource: (http://localhost:8080/nokeos/client/plugin/organization-client.jar, 1)What am I doing wrong?

The only thing I can guess is that the servlet is not
running over the "plugin" sub directory, or for all
file types.. Can you try the same thing with the
organzation-client__V1.jar in the same directory as
the other jar and the jnlp file ? Can you show the
servlet configuration in server.xml ?You were right, my web.xml wasn't setup correctly. I had <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC
     "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
     "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
    <servlet>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <servlet-class>jnlp.sample.servlet.JnlpDownloadServlet</servlet-class>
     </servlet>
     <servlet-mapping>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <url-pattern>*.jnlp</url-pattern>
     </servlet-mapping>
</web-app> and now I added <servlet-mapping>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <url-pattern>/client/plugins/*</url-pattern>
     </servlet-mapping> and now I don't get the error anymore.
I don't have the time now to do extensive testing but it seems to be ok.
Thanks.

Problem with version 8.1.1 deleting photos?

Hello, I just upgraded to iPhoto 8.1.1 and am having the first problems with iPhoto I have ever experienced. When I attempt to delete certain photos, the thumbnail remains. If I highlight the thumbnail, the information box in lower left corner references information on the event the photo is in, such as total size of the event and date range. If I try to quit iPhoto after doing this, it hangs and must be force quit. When I re-open iPhoto, the photo remains as if it was never deleted.
After reading many posts, I could not locate this issue, perhaps since the update is so new? Last night I rebuilt my library, as that sounds like the answer to most problems. After the complete library re-build, I am having the exact same problem.
I have about 19,000 photos that total 60 GB and have been using iPhoto for two years on the same iMac.

Welcome to the Apple Discussions.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

IDSM-2 and VMS problem with version software

I use a IDSM-2 with software ver. 4...
IDSM-2 is managing by VMS ver. 2.0.
Since 2006 I couldn't taking new signature
What can I do to upgrade IDSM to higher version ( IPS ver 5...) and which version VMS manage properly IDSM-2 with version software 5...
I still have a maintenance SMART NET to 2008 year.
If I need upgrade what can I do.
Mirek

Hi John Thank you for your Reply,
On my jsp page, i get the warning reference, " backingBeanScope.mybean.varname" not found.
In expression builder, though I can see and select the BackingBean but i can not see the below variables!!!!
It appears only the Beanname and not the plus sign to expand it.
This happens only for backingbeanScope...
best regards

Installation Problems with Version 4.7

I have had problems installing Version 4.7 Originally it worked but when I updated there were files that would not register.
I have 'cleaned' the registery of all Blackberry and Research In Motion references and completely uninstalled the Software.
A fresh installation still will not register:
GW.dll
GWApi.dll
DestopSetup_pb.dll
SyncAE_Pb.dll
This results in Media Manager (Roxio) not working - will not open due to a Runtime Error. Everything else appears to work OK.
Can someone help me? How can I 'register' these files so I can have use of Media Manager?
Thanks for any help!
Brian

It is important to know the exact error being generated, as runtime errors can point to several different causes or fixes depending on the version of Windows. On the BlackBerry website there is a great knowledge base where you can type in the specific error and likely get a result that points to the issue being experienced. The link is below:
http://na.blackberry.com/eng/support/
Hope that helps.

IPhone sync to iTunes problem with version 10.3.1

I've just upgraded to iTunes 10.3.1.55 and my iPhone will no longer sync to iTunes. I've tried downloading and reinstalling but this made no difference.
I get the following message:
"iTunes cannot read the contents of the Iphone. Go to the summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings"!
I picked up elsewhere that there was a problem with 10.3 which was supposed to be corrected with 10.3.1 but it seems that this update had not cured the problem.

Thanks for the info, Tom.
I've gone thru that Interoperating guide but I'll go thru it again. I don't see any error messages in my server logs. This is a single instance although the database does have multiple server instances connected to it. The data source name would be the same for all the server instances. Mine is the only one using the MDBs & WLS 10.3.1, others are using the stateless session beans. I'm using XA drivers & connection factories but I don't have any specific transactions defined in the Java code. Initially I didn't have the auto-acknowledge specified initially but thought maybe that is the problem. I have not knowingly specified any non-transactional config - if I did it would be via an omission.
So, if there is no problem in the WLS 10.3.1 supporting this acknowledgment then I'll keep reviewing my configuration.
Thanks again. I'll try to remember to post my solution.
Jim

Problem with version 10.1.3.1.0 and Tutorial for Forms/4GL

I startet to test the new version with the demo and
when i testing the first jspx on page 71 of the tutorial, I receive an error:
Unexpected exception caught: oracle.jbo.NameClashException, msg=JBO-25001: Name User of object type Attribute already exists.
i don't have an idea what's the problem. any help is appreciated.

Specifically, the steps in the tutorial from page 2-4 through 2-11
request that the user:
(1) Default entity objects for the SRDemo tables
(2) Change the datatype of ServiceRequest.SvrId to DBSequence
(3) Rename the associations involving ServiceRequest to have
more meaningful names.
The combination of the above three "ingredients" run into this bug.
The workaround for the tutorial is to skip step 2. & 3. wherein
the user sets the type of the SvrId attribute to DBSequence, and then
come back to the Entity Editor to mark the SvrId as DBSequence after
having first performed all the steps in the "Refining the Associations
Between Entities" section.
section

Problem with versions

Similar Messages

Maybe you are looking for