Problems accesing internet using wireless and WRT54GV2 router
I have mi Dell computer using a WUSB54GP adapter is wireless conected to my WRT54GV2 router, but some times a can not access internet anyway i can connect to 192.168.1.1, so i restore factory defaults, and shutdown the cable modem and the router, this fix the problems, but before some days, i have the same problem, so i have to restore the factory defaults again.
Note: if i wired my pc to the router i can browse internet, so i think the problem is only with the Wireless configuration.
Any Idea.
Thanks
Hi, I have had the same problem with my router since last week when I upgraded to the latest firmware, see my posts on this thread
Similar Messages
-
So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?
If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck -
I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??
If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/ -
Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?
Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box
-
After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
== This happened ==
Every time Firefox opened
== Hard to say but have been trying to diagnose for at least a week.Original message wouldnt post with attachments - trying again....
Attachments:
secondclickheredialog.jpg 40 KB
FirstDialog.jpg 19 KB
Firstclickheredialog.jpg 16 KB -
Using a WRT54G as a second wireless and wired router on a LAN
I have setup a WRT54G as a second wired and wireless router on my local LAN.
The WAN wired side of the WRT54G is setup completely DHCP. It gets IP 192.168.1.104 most of the time. (I have used a PC with DHCP on theis ethernet wire and it gets to the internet OK).
The LAN side of the WRT54G is setup as 192.168.20.1 and all wireless and wired devices connecting to it get ips of 192.168.20.xxx and communicate between them selfs perfectly. However, none of them can get to the internet through the WRT54G. What have I done wrong?
Thank YouI guess your WRT54G is not connected to Internet directly, but it's connected to another router that has Internet access.
If this is the case, you can configure this device as access point/hub only in order to get Internet access from the other router. Ignore the WAN connection on this WRT54G, just connect both router's LAN port with crossover cable.. After that configure the WRT54G's wireless setting. You can get more detailed info on how to do it in following article:
Quick Guide to Configure Wireless Router as Access Point
Hope helps.. -
EPC3825 - very slow internet using wireless
Hello. The other day I decided to upgrade my old 10/2Mbps connection to a 100/5Mbps cable connection and my ISP gave me the EPC3825 router. When using an ethernet cable everything works great and my speedchecks max out every time, the problem is that I can't have cables all over my apartment so I'd like to use wireless. With a computer located right next to the router I've gotten as high as 20Mbps and usually I'm left at about 3Mbps. I'm aware that using wireless can result in a small drop of speed but this just seems too much, especially considering the fact that I ran a steady 10Mbps when using wireless on my old connection.
I have tried every solution I can think of in the router setup but if there's anything that might help I would appreciate it.
Model:
Cisco EPC3825
Vendor:
Cisco
Hardware Revision:
1.0
Bootloader Revision:
2.3.0_R3
Current Software Revision:
EPC3825-v302r125532-110504c
Firmware Name:
epc3825-v302r125532-110504c.bin
Firmware Build Time:
May 4 14:04:04 2011Hi Fredrik,
Thank you for your question. However, this community is for Cisco Small Business Products and the EPC3825 is not a Cisco Small Business Product.
Your product is an internet service provider (ISP) supported product. In other words you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
For more information, please go here: http://www.cisco.com/web/consumer/support/prod_modems.html
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport -
Adding To The LIst Of Problems With Internet Explolrer 11 And Another Browser
I've b1 of the EA6500 router and like the othe posts I can't use IE 11. The "solution" is to use either Chrome or Firefox but not my Chrome has stopped working. All I get now is the LInksys Blue background. When I first see the site it looks like it's trying but then gives me a blue page. I've included screen prints of what I see when I go to Linksys Smart Wi-Fi page and below that is the version number. I have deleted my browser history, cache, saved form data, etc. but the result is still the same. And it doesn't matter if I use the router IP address or the Smartsys Wi-Fi link.
So right now the only broweser that will let me do router administration is Firefox but something tells me it too will have problems eventually.
the problem I'm having isn't with the router, it is with the company. People have tried to blame Micrtosoft in these posts for the problem but it's not their problem. The real kicker is that these Smart Wi-Fi routers are not old. nor are they cheap. LInksys announced this line at CES 2012, then again in April, and the last one announced for thie "initial" line-up of new routers was the EA6500 (the EA6500 was anounced in June 2012).
I've been mostly happy with LInksys reouters but if this is the way they are going to conduct business, then maybe I need to make certain adjustments with the networking products we purchase.
To put it bluntly...this situation is unacceptable.Believe it or not I stumbled across the solution to the problem and need to partially retract one of my previous statements. In a sense part of the responsibility does go to Microsoft because during one of their infamous "updates", the default version of Internet Explorer was changed to use the 64-bit version. I rarely used the Internet Explorer (64 bit) link in my Start Menu...I always used the "default" which apparently was the 32-bit version because there are plenty of companies that have not updated their software for 64-bit.
The article I came across is Problem With Internet Explorer? Maybe You Need Fewer Bits. The fix is simple and all it really takes is to right-click the icon for Internet Explorer and choose "Properties". When that comes up change the value in the "Target" field from "C:\Program Files\Internet Explorer\iexplore.exe" to "C:\Program Files (x86)\Internet Explorer\iexplore.exe". Once you make the change save the change and then use that link to get to administer your browser. I tried it and it worked. I guess I missed the post from Linksys Support about that possibility. -
Problems sharing internet with iptables and dnsmasq
I followed this exactly: http://wiki.archlinux.org/index.php/Internet_Share
And here is my dnsmasq.conf
# Configuration file for dnsmasq.
# Format is one option per line, legal options are the same
# as the long options legal on the command line. See
# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
# The following two options make you a better netizen, since they
# tell dnsmasq to filter out queries which the public DNS cannot
# answer, and which load the servers (especially the root servers)
# uneccessarily. If you have a dial-on-demand link they also stop
# these requests from bringing up the link uneccessarily.
# Never forward plain names (without a dot or domain part)
#domain-needed
# Never forward addresses in the non-routed address spaces.
#bogus-priv
# Uncomment this to filter useless windows-originated DNS requests
# which can trigger dial-on-demand links needlessly.
# Note that (amongst other things) this blocks all SRV requests,
# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
# This option only affects forwarding, SRV records originating for
# dnsmasq (via srv-host= lines) are not suppressed by it.
#filterwin2k
# Change this line if you want dns to get its upstream servers from
# somewhere other that /etc/resolv.conf
#resolv-file=
# By default, dnsmasq will send queries to any of the upstream
# servers it knows about and tries to favour servers to are known
# to be up. Uncommenting this forces dnsmasq to try each query
# with each server strictly in the order they appear in
# /etc/resolv.conf
#strict-order
# If you don't want dnsmasq to read /etc/resolv.conf or any other
# file, getting its servers from this file instead (see below), then
# uncomment this.
#no-resolv
# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
# files for changes and re-read them then uncomment this.
#no-poll
# Add other name servers here, with domain specs if they are for
# non-public domains.
#server=/localnet/192.168.0.1
# Example of routing PTR queries to nameservers: this will send all
# address->name queries for 192.168.3/24 to nameserver 10.1.2.3
#server=/3.168.192.in-addr.arpa/10.1.2.3
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
#local=/localnet/
# Add domains which you want to force to an IP address here.
# The example below send any host in doubleclick.net to a local
# webserver.
#address=/doubleclick.net/127.0.0.1
# --address (and --server) work with IPv6 addresses too.
#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
# You can control how dnsmasq talks to a server: this forces
# queries to 10.1.2.3 to be routed via eth1
# --server=10.1.2.3@eth1
# and this sets the source (ie local) address used to talk to
# 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that
# IP on the machine, obviously).
# [email protected]#55
# If you want dnsmasq to change uid and gid to something other
# than root, you will need to have CONFIG_SECURITY_CAPABILITIES
# enabled in your kernel. The default uid and gid of nobody will
# be used if capability is available and this is not set.
#user=
#group=
# If you want dnsmasq to listen for DHCP and DNS requests only on
# specified interfaces (and the loopback) give the name of the
# interface (eg eth0) here.
# Repeat the line for more than one interface.
interface=eth0
# Or you can specify which interface _not_ to listen on
#except-interface=
# Or which to listen on by address (remember to include 127.0.0.1 if
# you use this.)
#listen-address=
# If you want dnsmasq to provide only DNS service on an interface,
# configure it as shown above, and then use the following line to
# disable DHCP on it.
#no-dhcp-interface=
# On systems which support it, dnsmasq binds the wildcard address,
# even when it is listening on only some interfaces. It then discards
# requests that it shouldn't reply to. This has the advantage of
# working even when interfaces come and go and change address. If you
# want dnsmasq to really bind only the interfaces it is listening on,
# uncomment this option. About the only time you may need this is when
# running another nameserver on the same machine.
bind-interfaces
# If you don't want dnsmasq to read /etc/hosts, uncomment the
# following line.
#no-hosts
# or if you want it to read another file, as well as /etc/hosts, use
# this.
#addn-hosts=/etc/banner_add_hosts
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
#expand-hosts
# Set the domain for dnsmasq. this is optional, but if it is set, it
# does the following things.
# 1) Allows DHCP hosts to have fully qualified domain names, as long
# as the domain part matches this setting.
# 2) Sets the "domain" DHCP option thereby potentially setting the
# domain of all systems configured by DHCP
# 3) Provides the domain part for "expand-hosts"
#domain=thekelleys.org.uk
# Set a different domain for a particular subnet
#domain=wireless.thekelleys.org.uk,192.168.2.0/24
# Same idea, but range rather then subnet
#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
# Uncomment this to enable the integrated DHCP server, you need
# to supply the range of addresses available for lease and optionally
# a lease time. If you have more than one network, you will need to
# repeat this for each network on which you want to supply DHCP
# service.
#dhcp-range=192.168.20.100,192.168.20.149,12h
# This is an example of a DHCP range where the netmask is given. This
# is needed for networks we reach the dnsmasq DHCP server via a relay
# agent. If you don't know what a DHCP relay agent is, you probably
# don't need to worry about this.
dhcp-range=192.168.20.100,192.168.20.149,255.255.255.0,12h
# This is an example of a DHCP range with a network-id, so that
# some DHCP options may be set only for this network.
#dhcp-range=red,192.168.0.50,192.168.0.150
# Supply parameters for specified hosts using DHCP. There are lots
# of valid alternatives, so we will give examples of each. Note that
# IP addresses DO NOT have to be in the range given above, they just
# need to be on the same network. The order of the parameters in these
# do not matter, it's permissble to give name,adddress and MAC in any order
# Always allocate the host with ethernet address 11:22:33:44:55:66
# The IP address 192.168.0.60
dhcp-host=00:E0:B8:9C:B7:2C,192.168.20.1
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
# Always give the host with ethernet address 11:22:33:44:55:66
# the name fred and IP address 192.168.0.60 and lease time 45 minutes
#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
# Give a host with ethernet address 11:22:33:44:55:66 or
# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
# that these two ethernet interfaces will never be in use at the same
# time, and give the IP address to the second, even if it is already
# in use by the first. Useful for laptops with wired and wireless
# addresses.
#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
# Give the machine which says its name is "bert" IP address
# 192.168.0.70 and an infinite lease
#dhcp-host=bert,192.168.0.70,infinite
# Always give the host with client identifier 01:02:02:04
# the IP address 192.168.0.60
#dhcp-host=id:01:02:02:04,192.168.0.60
# Always give the host with client identifier "marjorie"
# the IP address 192.168.0.60
#dhcp-host=id:marjorie,192.168.0.60
# Enable the address given for "judge" in /etc/hosts
# to be given to a machine presenting the name "judge" when
# it asks for a DHCP lease.
#dhcp-host=judge
# Never offer DHCP service to a machine whose ethernet
# address is 11:22:33:44:55:66
#dhcp-host=11:22:33:44:55:66,ignore
# Ignore any client-id presented by the machine with ethernet
# address 11:22:33:44:55:66. This is useful to prevent a machine
# being treated differently when running under different OS's or
# between PXE boot and OS boot.
#dhcp-host=11:22:33:44:55:66,id:*
# Send extra options which are tagged as "red" to
# the machine with ethernet address 11:22:33:44:55:66
#dhcp-host=11:22:33:44:55:66,net:red
# Send extra options which are tagged as "red" to
# any machine with ethernet address starting 11:22:33:
#dhcp-host=11:22:33:*:*:*,net:red
# Ignore any clients which are specified in dhcp-host lines
# or /etc/ethers. Equivalent to ISC "deny unkown-clients".
# This relies on the special "known" tag which is set when
# a host is matched.
#dhcp-ignore=#known
# Send extra options which are tagged as "red" to any machine whose
# DHCP vendorclass string includes the substring "Linux"
#dhcp-vendorclass=red,Linux
# Send extra options which are tagged as "red" to any machine one
# of whose DHCP userclass strings includes the substring "accounts"
#dhcp-userclass=red,accounts
# Send extra options which are tagged as "red" to any machine whose
# MAC address matches the pattern.
#dhcp-mac=red,00:60:8C:*:*:*
# If this line is uncommented, dnsmasq will read /etc/ethers and act
# on the ethernet-address/IP pairs found there just as if they had
# been given as --dhcp-host options. Useful if you keep
# MAC-address/host mappings there for other purposes.
#read-ethers
# Send options to hosts which ask for a DHCP lease.
# See RFC 2132 for details of available options.
# Common options can be given to dnsmasq by name:
# run "dnsmasq --help dhcp" to get a list.
# Note that all the common settings, such as netmask and
# broadcast address, DNS server and default route, are given
# sane defaults by dnsmasq. You very likely will not need
# any dhcp-options. If you use Windows clients and Samba, there
# are some options which are recommended, they are detailed at the
# end of this section.
# Override the default route supplied by dnsmasq, which assumes the
# router is the same machine as the one running dnsmasq.
#dhcp-option=3,1.2.3.4
# Do the same thing, but using the option name
#dhcp-option=option:router,1.2.3.4
# Override the default route supplied by dnsmasq and send no default
# route at all. Note that this only works for the options sent by
# default (1, 3, 6, 12, 28) the same line will send a zero-length option
# for all other option numbers.
#dhcp-option=3
# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
# Set the NTP time server address to be the same machine as
# is running dnsmasq
#dhcp-option=42,0.0.0.0
# Set the NIS domain name to "welly"
#dhcp-option=40,welly
# Set the default time-to-live to 50
#dhcp-option=23,50
# Set the "all subnets are local" flag
#dhcp-option=27,1
# Send the etherboot magic flag and then etherboot options (a string).
#dhcp-option=128,e4:45:74:68:00:00
#dhcp-option=129,NIC=eepro100
# Specify an option which will only be sent to the "red" network
# (see dhcp-range for the declaration of the "red" network)
# Note that the net: part must precede the option: part.
#dhcp-option = net:red, option:ntp-server, 192.168.1.1
# The following DHCP options set up dnsmasq in the same way as is specified
# for the ISC dhcpcd in
# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
# adapted for a typical dnsmasq installation where the host running
# dnsmasq is also the host running samba.
# you may want to uncomment some or all of them if you use
# Windows clients and Samba.
#dhcp-option=19,0 # option ip-forwarding off
#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
#dhcp-option=46,8 # netbios node type
# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
# probably doesn't support this......
#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
# Send RFC-3442 classless static routes (note the netmask encoding)
#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
# Send vendor-class specific options encapsulated in DHCP option 43.
# The meaning of the options is defined by the vendor-class so
# options are sent only when the client supplied vendor class
# matches the class given here. (A substring match is OK, so "MSFT"
# matches "MSFT" and "MSFT 5.0"). This example sets the
# mtftp address to 0.0.0.0 for PXEClients.
#dhcp-option=vendor:PXEClient,1,0.0.0.0
# Send microsoft-specific option to tell windows to release the DHCP lease
# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
# value as a four-byte integer - that's what microsoft wants. See
# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
#dhcp-option=vendor:MSFT,2,1i
# Send the Encapsulated-vendor-class ID needed by some configurations of
# Etherboot to allow is to recognise the DHCP server.
#dhcp-option=vendor:Etherboot,60,"Etherboot"
# Send options to PXELinux. Note that we need to send the options even
# though they don't appear in the parameter request list, so we need
# to use dhcp-option-force here.
# See http://syslinux.zytor.com/pxe.php#special for details.
# Magic number - needed before anything else is recognised
#dhcp-option-force=208,f1:00:74:7e
# Configuration file name
#dhcp-option-force=209,configs/common
# Path prefix
#dhcp-option-force=210,/tftpboot/pxelinux/files/
# Reboot time. (Note 'i' to send 32-bit value)
#dhcp-option-force=211,30i
# Set the boot filename for netboot/PXE. You will only need
# this is you want to boot machines over the network and you will need
# a TFTP server; either dnsmasq's built in TFTP server or an
# external one. (See below for how to enable the TFTP server.)
#dhcp-boot=pxelinux.0
# Boot for Etherboot gPXE. The idea is to send two different
# filenames, the first loads gPXE, and the second tells gPXE what to
# load. The dhcp-match sets the gpxe tag for requests from gPXE.
#dhcp-match=gpxe,175 # gPXE sends a 175 option.
#dhcp-boot=net:#gpxe,undionly.kpxe
#dhcp-boot=mybootimage
# Encapsulated options for Etherboot gPXE. All the options are
# encapsulated within option 175
#dhcp-option=encap:175, 1, 5b # priority code
#dhcp-option=encap:175, 176, 1b # no-proxydhcp
#dhcp-option=encap:175, 177, string # bus-id
#dhcp-option=encap:175, 189, 1b # BIOS drive code
#dhcp-option=encap:175, 190, user # iSCSI username
#dhcp-option=encap:175, 191, pass # iSCSI password
# Test for the architecture of a netboot client. PXE clients are
# supposed to send their architecture as option 93. (See RFC 4578)
#dhcp-match=peecees, option:client-arch, 0 #x86-32
#dhcp-match=itanics, option:client-arch, 2 #IA64
#dhcp-match=hammers, option:client-arch, 6 #x86-64
#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
# Do real PXE, rather than just booting a single file, this is an
# alternative to dhcp-boot.
#pxe-prompt="What system shall I netboot?"
# or with timeout before first available action is taken:
#pxe-prompt="Press F8 for menu.", 60
# Available boot services. for PXE.
#pxe-service=x86PC, "Boot from local disk", 0
# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
#pxe-service=x86PC, "Install Linux", pxelinux
# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
# Beware this fails on old PXE ROMS.
#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
# Use bootserver on network, found my multicast or broadcast.
#pxe-service=x86PC, "Install windows from RIS server", 1
# Use bootserver at a known IP address.
#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
# If you have multicast-FTP available,
# information for that can be passed in a similar way using options 1
# to 5. See page 19 of
# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
# Enable dnsmasq's built-in TFTP server
#enable-tftp
# Set the root directory for files availble via FTP.
#tftp-root=/var/ftpd
# Make the TFTP server more secure: with this set, only files owned by
# the user dnsmasq is running as will be send over the net.
#tftp-secure
# Set the boot file name only when the "red" tag is set.
#dhcp-boot=net:red,pxelinux.red-net
# An example of dhcp-boot with an external TFTP server: the name and IP
# address of the server are given after the filename.
# Can fail with old PXE ROMS. Overridden by --pxe-service.
#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
# Set the limit on DHCP leases, the default is 150
#dhcp-lease-max=150
# The DHCP server needs somewhere on disk to keep its lease database.
# This defaults to a sane location, but if you want to change it, use
# the line below.
#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
# Set the DHCP server to authoritative mode. In this mode it will barge in
# and take over the lease for any client which broadcasts on the network,
# whether it has a record of the lease or not. This avoids long timeouts
# when a machine wakes up on a new network. DO NOT enable this if there's
# the slighest chance that you might end up accidentally configuring a DHCP
# server for your campus/company accidentally. The ISC server uses
# the same option, and this URL provides more information:
# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
#dhcp-authoritative
# Run an executable when a DHCP lease is created or destroyed.
# The arguments sent to the script are "add" or "del",
# then the MAC address, the IP address and finally the hostname
# if there is one.
#dhcp-script=/bin/echo
# Set the cachesize here.
#cache-size=150
# If you want to disable negative caching, uncomment this.
#no-negcache
# Normally responses which come form /etc/hosts and the DHCP lease
# file have Time-To-Live set as zero, which conventionally means
# do not cache further. If you are happy to trade lower load on the
# server for potentially stale date, you can set a time-to-live (in
# seconds) here.
#local-ttl=
# If you want dnsmasq to detect attempts by Verisign to send queries
# to unregistered .com and .net hosts to its sitefinder service and
# have dnsmasq instead return the correct NXDOMAIN response, uncomment
# this line. You can add similar lines to do the same for other
# registries which have implemented wildcard A records.
#bogus-nxdomain=64.94.110.11
# If you want to fix up DNS results from upstream servers, use the
# alias option. This only works for IPv4.
# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
#alias=1.2.3.4,5.6.7.8
# and this maps 1.2.3.x to 5.6.7.x
#alias=1.2.3.0,5.6.7.0,255.255.255.0
# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
# Change these lines if you want dnsmasq to serve MX records.
# Return an MX record named "maildomain.com" with target
# servermachine.com and preference 50
#mx-host=maildomain.com,servermachine.com,50
# Set the default target for MX records created using the localmx option.
#mx-target=servermachine.com
# Return an MX record pointing to the mx-target for all local
# machines.
#localmx
# Return an MX record pointing to itself for all local machines.
#selfmx
# Change the following lines if you want dnsmasq to serve SRV
# records. These are useful if you want to serve ldap requests for
# Active Directory and other windows-originated DNS requests.
# See RFC 2782.
# You may add multiple srv-host lines.
# The fields are <name>,<target>,<port>,<priority>,<weight>
# If the domain part if missing from the name (so that is just has the
# service and protocol sections) then the domain given by the domain=
# config option is used. (Note that expand-hosts does not need to be
# set for this to work.)
# A SRV record sending LDAP for the example.com domain to
# ldapserver.example.com port 289
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
# A SRV record sending LDAP for the example.com domain to
# ldapserver.example.com port 289 (using domain=)
#domain=example.com
#srv-host=_ldap._tcp,ldapserver.example.com,389
# Two SRV records for LDAP, each with different priorities
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
# A SRV record indicating that there is no LDAP server for the domain
# example.com
#srv-host=_ldap._tcp.example.com
# The following line shows how to make dnsmasq serve an arbitrary PTR
# record. This is useful for DNS-SD. (Note that the
# domain-name expansion done for SRV records _does_not
# occur for PTR records.)
#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
# Change the following lines to enable dnsmasq to serve TXT records.
# These are used for things like SPF and zeroconf. (Note that the
# domain-name expansion done for SRV records _does_not
# occur for TXT records.)
#Example SPF.
#txt-record=example.com,"v=spf1 a -all"
#Example zeroconf
#txt-record=_http._tcp.example.com,name=value,paper=A4
# Provide an alias for a "local" DNS name. Note that this _only_ works
# for targets which are names from DHCP or /etc/hosts. Give host
# "bert" another name, bertrand
#cname=bertand,bert
# For debugging purposes, log each DNS query as it passes through
# dnsmasq.
#log-queries
# Log lots of extra information about DHCP transactions.
#log-dhcp
# Include a another lot of configuration options.
#conf-file=/etc/dnsmasq.more.conf
#conf-dir=/etc/dnsmasq.d
eth0 is set up for 192.168.20.1, netmask 255.255.255.0. I can get an IP from my client machine and ping 192.168.20.1, but cannot access the internet. resolv.conf on the client machine has a nameserver of 192.168.20.1. Also, Firefox time sout trying to access Google via it's static IP.
What should I do to grant the internet to my client machine?http://wiki.archlinux.org/index.php/DNS_with_bind -> Did you try it too ?
-
Problem with touchpad using firefox and windows 8.1. I don't have a problem with explorer 11.
new HP computer with windows 8.1. Firefox does not work well with the touch pad when scrolling . very slow and erratic, most noticeable when using facebook. I don't have this problem when using Internet Explorer 11.
Old computer had windows 7 and my preference was to use firefox over explore. At this time i'm being forced to use explore and firefox is to aggravating to use.Currently Firefox is not available for metro devices.
However, make sure that the touch features are enabled by searching for "touch" in the about:config entries.
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page. -
Cannot connect to internet using wireless airport on my iMAC
I am running Leopard on my iMac and less than a week ago I was able to connect to the internet by wireless airport express. Now it says that my airport is working and connected but when I open Safari, I only get a partial url load and then it freezes and eventually after about 3-5 minutes it gives me a "You are not connected to the internet". I recently installed updates and I believe that after that is when it stopped working. After hours of troubleshooting research on the internet, I've tried creating a new network, editing the location from Automatic to a new one, simply shutting down and unplugging for a couple of minutes and plugging back in and rebooting for example and nothing has worked. Does anybody have any thoughts that could help me get back up and running again?
Thanks!Even though your profile does NOT show you updated to 10.5.2 I suspect you did by the way you are talking. The problem with 10.5.2 is in an extension file ( which is really a folder ) it is the root to the wi-fi problems. I will be posting a fix 1-2 days. In the mean time you should download a program called Pacifist Vers. 2.5.2. The trial version will work but I suggest you pay the $20 shareware because he earn it and if my feelings are correct about Apple you will need it again.
-
GE Internet Settings - ethernet and Linxsys router
I can not get my G5 to work with my linxsys router via a built in ethernet and ethernet cord.
Are there any specials settings I should be using? IP Address? Subnet? Router?
Please help as it is making me crazy!I can not get my G5 to work with my linxsys router via a built in ethernet and ethernet cord.
Hard to tell from that short description. It is best to describe what you have tried, what worked, what failed, and any error messages.
If the router has it's DHCP server enabled, you should configure your Mac's Network preference pane to use Ethernet and DHCP to get an IP address. -
MPI problem with mpirun, using mpicc and simple hellworld program.
analog to my stackoverflow post I need help with mpi. I am using openmpi and this is my sourcecode:
#include <stdio.h>
#include <mpi.h>
main (int argc, char* argv[]) {
int myrank;
int size;
MPI_Init(&argc, &argv);
MPI_Comm_rank(MPI_COMM_WORLD, &myrank);
MPI_Comm_size(MPI_COMM_WORLD, &size);
printf("Hello World. I'm process %d of %d processes.", myrank, size);
MPI_Finalize();
return 0;
If I now do:
mpicc test.c -o test
this works fine, but
mpirun -np 2 test
I get the error:
mpirun noticed that the job aborted, but has no info as to the process
that caused that situation.
What could be the reason for this problem???
What can I do now?
Do you need further information?
Last edited by vsilv (2013-11-13 17:27:37)Fixed broken link, moving to Programming and Scripting...
Please edit your post title to better reflect your issue: https://wiki.archlinux.org/index.php/Fo … ow_to_Post -
I need help to configure new wrt300n wireless and broadband router
Just purchased the wrt300n wireless-n-broadband router. The router is not being found. I have all the cat5 cables connected. I am running windows 2000 with a cable internet connection. There are 4 wired computers on the network I am trying to setup. The internet connection is great if I run it through the modem. I have run the cd-based wizard provided with the router a couple of times. No Luck! Please help!
you have a cable modem?
if so you need to reboot the cablemodem so it will see the mac address of the new device your adding to the network.
if you have ADSL we shall take it a stage further.
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360 -
Correlation Problem: unable to Use Correlation and Activate correlation
Hello,
i have created correlation name in correlation list and assigned involved messages and assigned proper field in correlaton in properties .i am able to view my correlation name in the properties of both receive steps ,but when i assign it to use correlation and move cursor to activate correlation .value in use correlation is not holding the value and holding space ,the same is happening to activate correlation field.
I am using PI 7.1.
Please let me know if you have really overcome this issue.
Regards,
Vishal K
Edited by: vishal kharat on Aug 3, 2011 6:15 PMit seems there is no way.
See note 1797073
Is there someone with a better solution?
Maybe you are looking for
-
Help Me. What is the best solution for this problem ?
-
DVD drive replacement on Satellite A100-646
Hi all, I want replace the DVD drive on my laptop. (I have many problems never solved) Do you know if exist a list of compatibility model for the A100-646? Model to suggest me? Thanks a lot. Regards Fabrizio
-
Validating File Browse path is valid
I'm sure some other people ran into this same problem... I need a way to validate the file entered into the File Browse item is a valid file path. I've created an obvious "not null" validation so the item has a value when the page is submitted. I als
-
How to start Premiere Elements 11 with welcome screen
How to start Premiere Elements 11 with welcome screen
-
Help with div container thumbnails
Learning and experimenting with css questions: I want thumbnail containers containing jpgs and text that wrap to browser width just like thumbnail jpgs. These will eventually be put in a spry collapsible panel. 1- How to make "no-wrap" text? I want m