Problems accesing TimesTen 11.2 with CPAN DBD/unixOdbc
We've previous accessed TimesTen 6.0 with perl scripts using the CPN DBD library without any issues. After upgrading to TimesTen 11.2, I'm getting the error below. The libraries are located in the location the error indicates. This is the last area where I'm having issues after upgrading to TT 11.2. Any suggestons?
executing: alltables SANTERA.SOFTWAREDELIVERY1%; quit;
DBI connect('driver=TimesTen;DSN=DynamicDBCS;TTC_SERVER=msclab52;UID=xxxxxx;PWD=xxxxx;AutoCreate=0','xxxxx',...) failed: [unixODBC][Driver Manager]Can't open lib '/opt/SANTone/msc/active/TimesTen/tt1121/lib/libttclient.so' : libttco.so: cannot open shared object file: No such file or directory (SQL-01000) at dbUpgradeUtilsOdbc.pm line 1130
ERROR: FAILED to open ODBC connection to DynamicDB on msclab52: [unixODBC][Driver Manager]Can't open lib '/opt/SANTone/msc/active/TimesTen/tt1121/lib/libttclient.so' : libttco.so: cannot open shared object file: No such file or directory (SQL-01000)
msclab52% ls -ltr /opt/SANTone/msc/active/TimesTen/tt1121/lib/libttclient.so
lrwxrwxrwx 1 root root 21 Jul 26 13:01 /opt/SANTone/msc/active/TimesTen/tt1121/lib/libttclient.so -> libttclient.so.gcc346*
msclab52%
msclab52% ls -ltr /opt/SANTone/msc/active/TimesTen/tt1121/lib/libttco.so
-rwxr-xr-x 1 root daemon 2160013 Jul 26 12:22 /opt/SANTone/msc/active/TimesTen/tt1121/lib/libttco.so*
Thanks,
William
Steps I performed:
1. Installed TT11.2 using setup script onto server51
2. Tarred up the installed directories and untarred the directories onto a development server.
3. Remove TT package from server51
3. Create a software package (tarball) containing both TT files and our application files.
4. Install our tarball back onto server51 from step one.
ttIsqlCS works in the same environment. I even added the environment variables created from ttenv.sh into the perl script itself without any luck.
Similar Messages
-
in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?
No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.
-
My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.
Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
ORA-00600 problem when create XMLType table with registerd schema
Hi,
I am using Oracle9i Enterprise Edition Release 9.2.0.4.0 on RedHat Linux 7.2
I found a problem when I create table with registered schema with follow content:
<xs:element name="body">
<xs:complexType>
<xs:sequence>
</xs:sequence>
<xs:attribute name="id" type="xs:ID"/>
<xs:attribute name="class" type="xs:NMTOKENS"/>
<xs:attribute name="style" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="body.content">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element ref="p"/>
<xs:element ref="hl2"/>
<xs:element ref="nitf-table"/>
<xs:element ref="ol"/>
</xs:choice>
<xs:attribute name="id" type="xs:ID"/>
</xs:complexType>
</xs:element>
Does Oracle not support element reference to other element with dot?
For instance, body -> body.content
Thanks for your attention.Sorry, amendment on the schema
<xs:element name="body">
<xs:complexType>
<xs:sequence>
<xs:element ref="body.head" minOccurs="0"/>
<xs:element ref="body.content" minOccurs="0" maxOccurs="unbounded"/>
<xs:element ref="body.end" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="id" type="xs:ID"/>
<xs:attribute name="class" type="xs:NMTOKENS"/>
<xs:attribute name="style" type="xs:string"/>
</xs:complexType>
</xs:element> -
Problem in stock maintenance--% wise ---with variants-----urgent
hi gurus,
I have created material using t.code [MM01]
Industry sector: steels and mining
Material type: configurable material steels and mines
Basic data 1:
Item category group: 0002-configuration
Classification:
Class: IRON_GRADES
Characteristics: IRON ORE GRADES BASD ON %
GRADE A = ABOVE 65%
GRADE B = 62% TO LES THAN 65%
GRADE C = 40% TO LES THAN 62%
PROBLEM:
Based on the grades or percentage of the iron ore the lease (customer) is going charged royalty
And System is picking the royalty according to the % of iron ore at the time of sales order using the t.code [VA01].
While I am delivering and issuing the goods using the same sales order using the t.code [VL01N]
System giving the following error message
If we analyze the error,
0 materials is available
There is no stock available for this material and according to % wise
So what is the procedure used to maintain the stock of configurable material in respective plant and storage location using the t.code [MB1C]
here i should not maintain the stock based on the sales order
from over all stock with % system has to pick the ordering quantity
how can i maintain the stock using the variants
How can I solve this problem?
Kindly help me
with regards
munichandrababuDear Guys,
Regards.Even we are stuck up with the same above issue for quite sometime..Would be great if someone could throw light on this...........if possible...
Manythanks
arun -
Blue screen problem on Satellite A350D-20E with Windows 7 - PART 2
My laptop came back from guarantee problem solving with a new VGA card.
All the same after a couple of weeks it started to crash all over again. I suppose it is a software problem.
Error message: Bluescreen
The computer starts to have graphic problems, some points on the screen become black, for example around the mouse arrow, and then the black points extend, the computer crashes and starts again automatically. It happens now 2-3 times a day. The computer trys and look for a solution on microsoft website but it cannot find it.
Some days ago I re-installed the drivers of the ATI Mobility Radeon HD 3650. Looks like there is no new version than 8.634.1.0. But all the same I re-installed it. The driver was on this Toshiba website. Unfortunately the problem was not solved. After 2 days without problems, the problems started again to present with the same frequency (and violence).
Can somebody help? Maybe is there an higher version of ATI mobility Radeon? But on the website of ATI mobility radeon supplier looks like there is no compatible version.
Anyone any other idea?
I can provide the following information
Probleemhandtekening (problem signature):
Gebeurtenisnaam van probleem (name of the happening): BlueScreen
Versie van besturingssysteem (version of control system): 6.1.7601.2.1.0.768.3
Land-id: 1043
Aanvullende informatie over dit probleem (complementary information about this problem):
BCCode: 116
BCP1: 86729008
BCP2: 92A44B86
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Bestanden die helpen bij het beschrijven van het probleem (files that help to describe the problem):
C:\Windows\Minidump\011712-18236-01.dmp
C:\Users\....\AppData\Local\Temp\WER-52697-0.sysdata.xml
TaurinellaHere the dmp file with the debugger.
I am afraid is an internal cable brake.
Error message when the computer crash:
PXE E61 media test failure check cable
The crashes are more and more. I do not have crashes in safe mode with internet possibility.
Anyone an idea? Otherwise I have to send the laptop back to the Toshiba warrantee assistance. The only think is that they need 6 weeks. I cannot wait 6 weeks!
Taurinella
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [E:\tijdelijk tv series\bluescreen problem\013012-20685-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Machine Name:
Kernel base = 0x83456000 PsLoadedModuleList = 0x8359f4d0
Debug session time: Mon Jan 30 13:47:39.724 2012 (UTC + 1:00)
System Uptime: 0 days 0:34:20.737
Loading Kernel Symbols
.................................................. ...Unable to load image Unknown_Module_00000000, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000
Unable to add module at 00000000
Loading User Symbols
Loading unloaded module list
......Missing image name, possible paged-out or corrupt data.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {8656c510, 91c24b86, 0, 2}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: 8656c510, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: 91c24b86, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 00000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 00000002, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
+61d02faf00deddc4
91c24b86 ?? ???
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
8357dc98 834d637f 8a45a768 8358a380 83580c00 0x90bda3f6
8357dd20 834cde0d 00000000 0000000e 00000000 nt!PoIdle+0x524
8357dd24 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0xd
STACK_COMMAND: kb
SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Unknown_Module
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: 0x116_ANALYSIS_INCONCLUSIVE
BUCKET_ID: 0x116_ANALYSIS_INCONCLUSIVE
Followup: MachineOwner -
Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly. -
Problem in aligning dynamic UI with the static UI
Hi All,
I have problem in aligning dynamic UI with the static UI, I am using Matrix layout.
Static fields are spread over 2 colums and 3 rows:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
Now when a value is selected in C, than E becomes visible, and depending on the values selected in E, there are dynamic UI generated, i.e dynamic lables and depending on some validation it will be either a dropdowns or input fiels or both.
at run time screen is like this:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dynaSPACEdropdown
dynbSPACEinput field
if I change my selection in E than layout looks like:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dynaSPACESPACEdropdown
dynbSPACESPACEinput field
Requirment: I need all the lables as well as dropdown/ input fiels in line with the static fields irrespective of my selection in E.
Something like this:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dyna SPACEdropdown
dynbSPACESinput field
dyncSPACESdropdown
All this elements are in a group and that group has 2 transparent containers, 1 for static and for holding dynamic UI.
I tried playing with the container properties, and also tried fixing width of dynamic UI but still the alignment issue is encountered.
Can U guys plz give in ur valuable inputs as i need to fix this urgently.
Regards,
JJHi Armin,
Can you please elaborate your solution ?, I do not have an idea of InvisibleElement & IWDView.resetView() ,
If you can give me the exact pointer than it would be great and a good learning exp. for me.
Thanks for the action assignment part, it worked.
if (wdContext.nodeMaterialClass().size() > 0 && wdContext.currentContextElement().getActionMatCls()) {
if (wdContext.currentMaterialClassElement().getMaterialClass_Description() != null || !wdContext.currentMaterialClassElement ().getMaterialClass_Description().equalsIgnoreCase(" ")) {
IWDGroup Searchgroup = (IWDGroup) view.getElement("DynGroup");
Searchgroup.destroyAllChildren();
view.getContext().reset(false);
for (int i = 0; i < wdContext.nodeMaterialCharateristcs().size(); i++) {
//this for label
IWDLabel CharLabel = (IWDLabel) view.createElement(IWDLabel.class, "label" + i);
CharLabel.setText(wdContext.nodeMaterialCharateristcs().getMaterialCharateristcsElementAt(i).getDescr_Char());
CharLabel.setDesign(WDLabelDesign.EMPHASIZED);
CharLabel.createLayoutData(MatrixHeadData.class); CharLabel.setWidth("154px"); Searchgroup.addChild(CharLabel);
further there are conditions to create either dropdown or input field
Can you please point where and how to apply your solution.
Regards,
JJ -
Problems after transfering Cost centers with LSMW
Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
KarolHi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein -
Frequent problems in Apple PPC Mac with OSX Leopard 10.5.8
Hi,
Frequent problems in Apple PPC computers with OSX Leopard10.5.8
I have a Imac 17icnh G5 2Ghz 512 ram (Standard not the isight) it had a clean install of OSX 10.5
But after running a update to 10.5.8 with update if Itunesand security etc it was about 6 updates all together.
Now the Imac uses to much CPU for small tasks and uses84-90MB of ram for a Kernal Task.
When I try check permissions in disk utility the CPU goes toabout 80% in something called InstallerB and wont finnsh because there is no CPU power left
and will over heat if I left it for too long.
The Exact symptoms of the 10.5.8 with update my differ alittle but I have had this same problem on about 5 PPC apple computers and in the end I sometimes
Just down grade to the flawless Tiger 10.4.11.
So my question is > how do I fix this problem ? Which of the Updates dose this to PPC mac’s ? (is it itunes or securtiy)
Is Leopard 10.5.8 just a peace of JUnk just like windows Vista was and I should alwasy use Tiger for PPC and Snow leopard for Intel.
SamHi Sam,
Leo uses 2 to 4 times the resources of Tiger, & while 512MB is the minimum for Leo, that really crimps the OS, it isn't all that great for Tiger, though 10.4 does better with only 512MB, I'd put 2GB in it for decent performance, (if an IntelMac I'd say 4GB for the same OS).
http://eshop.macsales.com/item/Other%20World%20Computing/3200DDR2GBP/
Also, open Console in Utilities, look for repeating messages, you may have some 10.04 things running that fail in 10.5.
I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Is Leopard 10.5.8 just a peace of JUnk just like windows Vista was and I should alwasy use Tiger for PPC and Snow leopard for Intel.
In my opinion, OSX is headed towards Windows®, & aimed at users that only know how to Twit.
If Tiger does everything you need, like you don't need iDevices & know how to protect yourself on the Internet without the added Security of 10.5 & associated Apps, then by all means stick with 10.4.11.
If you want/need 10.5... max out the RAM for sure. -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?
I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
mosesThose who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."
-
Recently installed Amazon Uploader and Downloader, and downloaded MP3s from Amazon. My personal computer is connected via Internet to a corporate network; (corporate) SOPHOS and Malwarebytes Pro for virus protection. Recent scans show no infections. I cleared history, cookies, etc. Running Windows 7 and current version of Firefox. Not having problem on IE 8, or with any other apps. Have not installed any other applications, but did install a JAVA update yesterday. Did not help the problem.
Ya actually i did ask here :P And no one offered to help :(
Well i shouldnt say that, all anyone said was to read the java api's.... When all i needed was to learn how to make the link to process input to a database by a servlet.
Anyway thats why i posted this here, in case anyone needs help on the same issue as i did.
And i dont make jsp's by hand.
I currently use for my developing
Dreamweaver mx 2004
Firewords mx 2004
Flash mx 2004
MySql db
JCreator for all the bean and java's
=D
That way there is minimal hand coding for html/jsp pages.
Maybe you are looking for
-
Bridge will not Open a File in Photoshop
Yesterday my Bridge stopped opening files. I have to go to the file folder once I know the file name and open it the old fashioned way. Anyone know if there is a secret code to get it to open files again? This morning I went to the downloads and down
-
Hi, Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter), and in my report i have one table and one Chart, my requirement is the table in the report has to show the data for 6 parameters only i
-
Want to replace stock HDD with a 256GB SSD, have questions.
Hi All, I am sure this has been asked a bunch of times, so forgive me if I ask again... I have a late 2010 MBP (Model A1278). Currently the machine has 4gb of memory and a 256gb hard drive on it. The machine is starting to show its age and is slowi
-
Hi, Does PGI creates any accounting document? Also I would like to know that PGI means that the delivery is complete and the goods are issued to the customer.Please suggest if my concept of PGI is correct?
-
HP Pavilion DV6 3036tx_Whe​n Idle in 70s
I'm currently on Google Chrome and check the temps on SpeedFan or GPU-Z which both show that I'm 74c. I'm currently running AMDs 13.9 catalyst driver and have the latest (2011) bios for this model. If there are any other details you wish me to get, p