Problems after transfering Cost centers with LSMW

Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
Karol

Hi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein

Similar Messages

  • Report to determine Cost centers with Percentages

    Hi
    Please suggest a report where I can pull the data related to an employee travel expenses with COST CENTERS, along with percentages if multiple cost centers exist, for a particular Personal Area.
    Thanks

    required fields are
    Employee No.
    Employee Name.
    Cost Center Name/Text
    Percentage of each cost center if more than one cost center

  • [SOLVED] SMS Conversation problem after transferring messages

    Hi,
    After transferring my SMS messages from my Xperia Z to my new Z3c, received messages are added to the existing conversation, but the replies I send appear in a new conversation!  Anyone else have this problem? Any ideas how to fix it? 
    Thanks,
    Chris
    Update - It turns out that this was due to spaces being present in the mobile number in my contacts after I'd transferred them, I removed the spaces, and it fixed the issue.

    This was driving me insane, thanks for pointing out the obvious! :-)

  • How to use multiple cost centers with internal order for PO

    Dear Gurus,
    I have one issue.
    For indirct purchase with posting over internal order, my client wants to book good reciepts over different cost centers.
    Thanks In advance
    Regards,
    Sameer

    Hi Sameer,
    For the scenario you have mentioned, you need to check the account assignement at the PR/PO wherein
    you can take Cost center as actual object & internal order (statistical) as assignments.
    At the time of Goods receipt the system will the automatically post to Cost center with a statistical posting to Internal order.
    You have the second option of maintaining account assignment at time of PR/PO as Inetrnal order only (Actual) & then at the month End you can settle the cost to multiple Cost centers by defining the settlement Rule. For Eg. At the time of settlement you can post 20% to Cost center "A", 50% to Cost center "B" & 30% to Cost center "C".
    Assign points...if useful.
    Regards,
    Amol

  • Transferred cost centers are not showing up in 0FIAA_C04

    Hello gurus..
    Recently, in a data maintenance, 3 new cost centers (cc) were move from one company to another.  Those cc are not showing up in the infocube 0FIAA_C04; even though I have re-loaded the master data for 0ASSET, 0ASSET_AFAB and 0DEPRAREA and also re-loaded the data that comes from its infosources 0FI_AA_006: Transactions w/ Value Adjustments,  0FI_AA_005: FI-AA: Acquisitions and 0FI_AA_001: Annual Values. 
    Can someone please tell me what I am missing to re-load.
    Thanks a lot!!!

    HI,
    did you check in the in the master data extracter whther the values for 3 new cst centres are getting populated correctly.
    Thanks & Reagrds
    krishna.y

  • Is there any SAP Standard programe to posr cost centers in LSMW

    Hi
    Is there any Direct input or Batchinput programe to load cost centers
    by using LSMW

    No. Also a note that these tables store data in a different way. Meaning that if say for a material , period and plant combination (primary keys of tables) the value of stock has not changed then there will be no entry in these history tables. So usually you would need to write a Function module to read these tables and populate values accordingly for BW reports to make sense.
    Hope this helps.

  • Serious Problem after update my 5800 with 40.0.005...

    Yesterday,I updated my 5800 with FW 40.0.005. I really impressed with the new easy way of move in touch screen but this version has a big problem that I considered.
    First,you have to set as a ring an .mp4 file or any video file and then lock your mobile 5800.
    When you have an incomming call the screen isn't working normally and it stops for miliseconds and starts again!
    When it happens the power of mobile increasing sharply and I am upset what it could happen if the call continue too much.
    Please somebody check it as soon as possible because it may do harm to our mobile by any explosion from this problem!
    For temporary solution a suggest not to set video files as a ringtone and if you want to do this don't lock your mobile which helps the video file to work normally.
    With regards,
    Stelios
    Solved!
    Go to Solution.

    Dear all
    kindly visit the below link and read all the actual exp b4 updatig to V40'
    NOKIA 5800 V40 BUGS
    there are alot of bugs in v40 and its is discover by the ppl like you. I Have MY nokia 5800-d1 with the RM-356 type having SWV:21.0.0.25.
    I am happy with it as i dont want to loose my data and time. It cost me alot
    THE PRIOR KNOWN BUGS IN V40 UPDATE
    NO RDS IN Radio Option (It was there in previous all version till V30&31) 
    Radio application can't be exited in the end
    some application icons are multiplied like in previous firmware version 
    Thumbs of contacts on HS are loading too long
    listing files in Settings/App mgr/Installation files takes way too long too
    The screen won't turn off when you plugged the power. Same that it won't turn off after you unplugged from power.
    Applications cannot be uninstalled. It says "Unable to start the installer" or something like that the radio application could not be quitted
    The new SW update doesn't allow me to install updates. It just says fail...
    Most of the time, the music player cant be closed and the song will show right on the home screen.  my screen backlight also not go off when plug in or unplug the charger
    Normally, when your 5800 full charged, it will beep and turn on the screen for couple of seconds. Now it won't turn off once this was triggered.
    In Messaging, message won't open on tapping ! The message seems selected, and doesn't respond to tapping(single or double) ... then options for message also doesn't open, only option is to exit messaging
    Frequently it happens I must remove SD before I can install/remove programs
    video player bugs (many video played improperly, sound played without images. or freeze at some point, but the sound continues
    Unable to install Opera Mini from Ovi Store and from Opera.com website download
    Regards
    Ahmad Ladhani

  • Problems after doing full restore with Time Machine

    If I reinstall Leopard and and do a complete restore with time Machine, I have to erase my Time Machine backup drive and do a complete TM backup from scratch because TM will not pick up where it left off doing incremental backups. It wants to start over like it's never done any backups at all. It's a pain because it take me 4 or 5 hours to back up 270 GB. I've had to do this twice so far because once I had a problem with my startup drive and just today I made an external hard drive with leopard and restored all my files via TM.
    Is there anyway to get out of starting over from scratch when I do a full restore with TM ?

    The following procedure works for me if your restore happens to be from the last backup that Time Machine completed. (I'm not sure if it would work just as well if you restore from an older point in the Time Machine history -- but it certainly should!):
    After you complete the full restore (which will force a Restart when it completes), log in and then immediately go to System Preferences / Time Machine and Turn Off Time Machine to prevent any premature additional backups.
    Now go to System Preferences / Spotlight / Privacy and drag the icons for all your hard drives (including your main hard drive and the Time Machine hard drive) from the Desktop into the Privacy list. This will stop Spotlight indexing of all these drives to speed things up for what follows. You will do the indexing later (see below).
    If you have any sort of automatic virus protection active, disable it at this point to speed up what follows.
    Then Restart again (to get things into a fresh state), and then immediately do a Repair Permissions for your main hard drive (using Applications / Utilities / Disk Utility). Be patient. This will take 30 minutes or more and the progress bar may not advance until the very end. Do not be alarmed when several hundred notifications come up, as most of them are minor tidying up items, but some are significant. For example, you will see the ownership get adjusted for every help file in every language for every Lexar printer the system knows about (minor). You will also see the permissions adjusted for the root directory of your main hard drive (significant).
    And all of these permission and ownership repairs will happen EVEN THOUGH the files you backed up into your Time Machine may have had no such problems. They are, apparently, a result of the method that Time Machine uses to rebuild your file system during the restore.
    When the permission repair eventually completes, Quit Disk Utility and Shut Down the computer.
    Now reset the Parameter memory (PRAM). PRAM holds copies of certain system settings for rapid access. To do this, hold down the 4 keys Apple-Option-P-R continuously and press and release the power button. When you hear the SECOND startup chime, release those 4 keys. The system will continue to boot up normally. This makes sure the system's Parameter memory is in sync with the System Preferences resulting from the restore you just completed. It probably would have been anyway, but this makes sure. Among other things, this makes sure the system takes proper note of your "computer name" (System Preferences / Sharing) which is crucial to Time Machine's ability to recognize and use your previous backup database on the Time Machine hard drive.
    Now log in and fire up Mail to let it automatically finish the restore of its mailboxes by importing the necessary mail lists. Quit Mail when it finishes.
    If you have any other, application specific tasks to perform to complete the restore for any other applications, now is the time to do them.
    Finally, go back into System Preferences / Spotlight / Privacy, select the line showing your main hard drive in the list, and click the "-" on the bottom to remove it from the list. Repeat this for every other hard drive EXCEPT for your Time Machine hard drive. Exit System Preferences. Spotlight will now begin to re-index those hard drives from scratch. Watch this by clicking on the Spotlight icon in the menu bar. Wait for indexing to finish.
    Your restore is now at the point where you can let Time Machine do a new backup.
    I suggest you Restart again to get things into a fresh state (not truly necessary, but it is what I do). Then go into System Preferences / Time Machine and, at long last, Turn On Time Machine again. Then do a Back Up Now (right click on the Time Machine icon in the dock and select Back Up Now from the pop up menu).
    Because of the restore, Time Machine will now do a Deep Traversal of your entire file system looking for EVERYTHING that has changed compared to the last backup on its hard drive (rather than depending on the file system transaction logs as it normally does to make incremental backups happen much faster). The "Preparing" stage for this will take a long time -- about as long as a Repair Permissions pass in Disk Utility. Eventually Time Machine will start transferring files. This will be a backup of significant size because all the permissions repairs you did above, etc., count as changes as far as Time Machine is concerned, not to mention that certain portions of the file system are rebuilt during the restore. But it should be WELL SHORT of actually doing a complete backup of everything on your system. I.e., it is just a particularly large, but nevertheless incremental, backup added on to the previous stuff on your Time Machine disk.
    Crucial to this is that Time Machine recognizes the prior database on its hard drive as applying to your computer. Thus the permissions repair and PRAM resetting steps above.
    When that backup eventually completes, go into System Preferences / Spotlight and remove your Time Machine drive from the Privacy list. Exit System Preferences and wait for Spotlight to finish re-indexing your Time Machine drive.
    Restart once again, just to get things into a fresh state, and then re-enable any antivirus "live protection" stuff you disabled above.
    You are done.
    From this point on, Time Machine should do "normal" incremental backups, and the previous history of Time Machine backups should be accessible and used by Time Machine just as before.
    --Bob
    Message was edited by: BobP1776

  • Strange problem after installation of bootcamp with windows 7 on Imac i5 27

    After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
    If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
    The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?

    Hi,
    This is Oracle Database Express Edition (XE) forum.
    If you like use APEX listener and have problem with that here is link to correct forum.
    ORDS, SODA & JSON in the Database
    If you like use EPG see configuration steps from APEX install instructions
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Problems after flash player update with firefox

    I have problems with video streaming on firefox after the flash player updated to 11.7. The video plays but the audio suddenly stops while the video continues to play but will also  stop after a few seconds. Does anyone know what may cause this problem?

    Hello,
    Flash Player installs to the Windows directory that standard user accounts do not have access to, therefore, Admin access is required for installation.
    Maria

  • Access privilege problems after transferring user to computer

    Hi
    I gave my flat screen iMac (lamp-shade version) to my parents when I bought a new Intel Core Duo. They had an older iMac. Both their old computer and the one I gave them are running 10.2.8. I connected the computers with a firewire, created a new user (with admin status) and transferred their user info onto my old computer. It all seemed fine, except now when I log on as them all of the applications have access privilege problems. Is there a global way for me to give them read and write access to everything?
    Thanks
    Intel Core Duo   Mac OS X (10.4.4)  

    You may need to post this in one of the older iMac forums iMac (CRT) or iMac (Flat panel) where someone may still be running OSX which is that old. As you may realize with your new iMac and 10.4, much has changed.
    Are you sure that when you sign in as the administrator and go to System Prefs/Accounts and view your access to the account that you created for them there are no access limitations?

  • Battery problem after enabling battery percentage with ibackupbot

    My battery on my iPod touch 5g drains faster after I added the battery percentage with ibackupbot. Does anyone who did this have the same problem?
    Before my battery drain to 93% of constant usage ( wifi on,checking email, browsing safari, etc ) in about 1 hour and 25 minutes; now it goes to 93% in 45 to 50 minutes.
    Also when I charge my iPod it gets only to 95% and stops charging, and when I unplugged it, it reads 99%.
    Please help if you guys know how to fix this..

    Restore to the iPod to factory settings/new iPod.

  • Muse 2014 - Problems after converting a Site with Safari

    After converting a site to muse 2014 and exporting it to html the JS-error message "Einige der Dateien auf dem Server fehlen oder sind ungültig. Löschen Sie den Browser-Cache und versuchen Sie es erneut. Wenn das Problem weiterhin besteht, wenden Sie sich an den Autor der Website." ("Some of the files of the server are missing or incorrect") apears when opening every site.
    I did not made any change to the site itself, the site was only converted and re-exported.
    The error is only shown with Safari, but i only tried with IE 10 under Windows

    When you republish your site, make sure you upload all files. New versions of Muse may change JavaScript files or CSS files for pages that you have not changed. The error message is indicating there are expected files that are missing or that files it found and loaded were generated from an older version and need to be updated.

  • Problems after transferring library via Homeshare

    I've recently transferred my itunes library from an old PC to my new laptop, via Homeshare, which seems to have worked fine.
    As I won't be using the old PC anymore, I have deactivated all computers registered and re-activated the laptop and this seems to recognise both the laptop and my Iphone as devices.
    The problem is that when I try and sync music to my Iphone, after choosing what I want from the library on my laptop, it tells me that my iphone is still 'linked' to my old PC.  I had thought, once I had deactivated the PC, it would revert to the laptop.
    Can anyone advise me what I need to know now, in order to have the library on my laptop as the one and only library?
    Thanks

    AB,
    Once you have built your library on the new computer, and verified that it has everything, go ahead and sync your phone to the new machine.
    It may be that the new library is identical to the old one, but the iPhone does not know or care about that!  It just syncs to the library that give it.

  • Problem after balance carry forward with t-code: FAGLGVTR

    Hi,
    I have run that t-code: FAGLGVTR for balance carry forward. Balance transferred correct according to GL Account but when I run t-code u201CS_ALR_87012082u201D for vendor balance for respective recon GL code its show difference. Please let me know how I am make it OK.
    Thanks & Regards,
    Hemant Maurya

    Hi hemant,
    There might be some differences between Recon Gl account & individual vendor balances, this is because when you do the FAGLGVTR & after dat again if u post some open invoices then in Recon.Gl account,balances will get automatically updated but not in vendor balances so what you have to do is RUN F.08 again & carry forward the vendor balances then only both these will be on same platform.
    Thanks & Regards
    Anuj Agarwal

Maybe you are looking for