Problems booting into OS 9.1 after upgrading to Geforce4 Ti4600

Help!
I still use a older g4 mac to work with several older legacy hardware products such as 12x9 Walcom Tablet, Kodak 8650 dye-sub printer, and a Agfa 12x18 2000xl oversized scanner, and a Nikon LS-2000 neg scanner. So, I still use classic for these hardware items in which os x drivers were never created.
I wanted to use two displays for color proofing, the adc 23" studio display and a DVI formac display. So I needed to upgrade my Geforce2 MX to Geforce4 Ti4600.
It boots fine into OS X however it freezes when booting into os 9.1.
I cannot find any information on the extentions needed for OS 9.1. I am using Nvida drivers 1.1.1 from June 2001. I think this is the source of the problem.
What drivers do I need for the computer to boot?
Adrian

Thank you for the reply, but that link does not work. Is this an os 9.1 issue were the drivers do not exist and I have to upgrade to 9.2.2 or is this an updated drivers issue?
Adrian t

Similar Messages

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems to reconize the sim card after upgrade itunes, what should I do???

Problems to reconize the sim card after upgrade itunes, what should I do???

Get a SIM card from the carrier to whom the phone is legitimately locked.

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Cannot boot into Mac OS X after partitioning in Windows

My Mac is a Macbook Pro 17", I got it from my friend (no original disc).
So after upgrading it to Mavericks (I was unable to install Windows using Boot camp of 10.6.8), Boot Camp successfully let me install Windows 8.1 Pro (x64).
However, after installing, whenever I install the Software Support in Windows, Windows always show Blue screen after showing the logo. I was able to restore Windows back. Therefore, I am now using Windows with only basic components, no Boot Camp driver.
The problem is that, I shrink the Boot Camp partition, and create another NTFS partition. Now, I cannot boot into Mac OS anymore. Holding Command + Option + R does nothing, holding Option while startup shows a hard drive named Windows (instead of Mac HD).
Can I make the Mac bootable again? And if possible, is there any available driver for Windows 8.1?

Hi iPragash,
At startup, hold down the Option Key (alt) to choose between Mac OS X and Windows.
To select what system you want to boot into by default:
- when in Windows go to the Control Panel ->BootCamp ->Installed Startup Disks
- when in Mac OS X go to System Preferences->Startup disk.

Macbook Pro 17 cannot boot into Mac OS anymore after making partition on windows

My Mac is a Macbook Pro 17", I got it from my friend (no original disc).
So after upgrading it to Mavericks (I was unable to install Windows using Boot camp of 10.6.8), Boot Camp successfully let me install Windows 7 Professional (x64).
The problem is that, I shrink the Boot Camp partition, and create another NTFS partition (so I can store data in the second partition as I usually do when using Windows). Now, I cannot boot into Mac OS anymore. Holding Command + Option + R does nothing, holding Option while startup shows a hard drive named Windows (instead of Mac HD). And no Recovery HD too

shakhriyor,
you’re going to need to purchase a replacement pair of the original grey installation DVDs for your MacBook Pro from Apple to be able to fix this problem.

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Help! Problems using FCE 2.0.3 after upgrading to OS 10.4.9

I recently upgraded to OS 10.4.9 and now I am getting "dropped frames on capture" error messages. None of the variables have changed (Same computer, camera, tape, external HD, cables) It was working great two days prior to upgrading to 10.4.9 and now I can't capture anything without getting dropped frames. I've tried a different tape, switching the capture disk to my internal HD, switching cables, reinstalling OS 10.4.9 again (this time from direct combo download), rebuilding permissions, trashing FCE preferences. I'm officially STUCK! Any help would be appreciated. Is anyone experiencing the same problems after upgrading to 10.4.9?

Just so we have all the "me too"s in the one thread, I posted about this on Saturday. I said:
I've been using FCE HD (3.0.1) for ages with my current setup and I've never had any capture problems.
This weekend, I tried capturing some anamorphic MiniDV footage for the first time for a few weeks and I repeatedly got the "dropped frames" error. I tried:
1. another cable
2. some different anamorphic footage from another tape
3. trashing the prefs
4. re-installing FCE HD
5. de-fragging the HDD
6. another machine (iBook G4)
I still got the error, even on the other machine.
I tried iMovie and the same camcorder and I had no problems at all so I can workaround by capturing there and importing the project into FCE (and rendering the audio), but a kludge isn't a fix
The only things to have changed since the last time I successfully captured any footage were the software updates OS X 10.4.9 and QT 7.1.5 so I strongly suspect one of those.

Problem in de-queuing xml messages after upgrade to 11g database

We just upgraded from database 10g to 11g. After upgrade we are facing a problem in processing xml messages smaller than 4000 bytes. Messages larger than 4K bytes are handled correctly.
We have Tibco IM/BW adaptors accessing Oracle AQ through JDBC Thin from other platforms than the DB is on.
These clients connect to the database with an application user (XXIO) which belongs to the APPS schema.
The client makes an enqueue to the queue-table XXIO_I00_I_JMS_Q_TABLE and in USER_DATA-part of the message the client specifies some header-information for the message with the actual data.
The enqueue is made with JDBC Thin 11.1.0.7 and with the aqapi.jar/jmscommon.jar-files from the rdbms 11.1.0.7-installation, so the API towards the database is of the correct version.
When the enqueue is done, the message has correctly been put into the table XXIO_I00_RT_I_JMS_Q_TABLE.
Now to the problem,
For example, we have a message that just has been put into the table, and it has a text_len of 3887.
The text-part of the message is put in text_lob, not in text_vc.
The problem now is that when the propagation starts
(execute DBMS_AQADM.ENABLE_PROPAGATION_SCHEDULE(queue_name => 'XXIO.XXIO_I00_RT_I_JMS_Q'),
the code for dequeue and move of the message, assumes that the text is in text_vc when text_len <= 4000 bytes.
Since that's not the case, the message propably gets errored out, and is put in the errorqueue.
The length of the messages that are put into text_lob vary from 2000 and up, so text_vc seems to be used only
for messages below 2000 bytes now. This problem occurred when we upgraded the DB and client API to 11.1.0.7.
Any pointer will be helpful.
Thanks

here is the output
HOST LOWER_PORT UPPER_PORT ACL ACLID
smtp.ABC.com 25 25 /sys/acls/ACLPORTA25.xml A275C7806DD74DE38F95D7E17794803D
mqlinuxext.serasa.com 4081 4081 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com 80 80 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com /sys/acls/http_access_acl.xml 40C25DBC57E4476BA7906652EBD50332
Thanks a lot

Netra T1 AC200 problems booting into single user

I have a stack of Sun Netra T1 AC200's. I installed them all with Solaris 8 10/01 from my
Jumpstart server. I allready have about a hundred U1,U5 and U10's installed from this server so I know it should work. I have, however not installed any Netra's with it before.
My problem is that I have no problem booting the Netra's after I have installed them, but if you try to
boot into single user with fex. "boot -s" then it would display the usual "Type control-d to proceed with normal startup, or give root password for system maintenance". Problem is that no matter what I type, I don't get a reaction!!
I have everything on console, and I checked that all my connectors are correct and of the type specified in the Netra user manual.
Strange thing is that halting and jumping into the LOM works without problems, same goes for kicking the system down to single user from multiuser...
I've also checked with installing Solaris 8 04/01, but same thing happens there.. I can't have three faulty machines either...
All leads and helpful hints are welcome as I've checked and checked, but can't find anything out of the ordinary...
On beforehand thanks,
Thomas

What does "printenv input-device" show you? My thinking is that maybe LOM might have control at this point. It should probably be "keyboard" or "ttya".
Also check that root's shell is bin/sh in /etc/passwd.

Trouble booting MacBookPro (13" mid 2010) after upgrading ram?

My MacbookPro 13 inch mid 2010 will not boot after upgrading the ram. I just upgraded to mountain lion a week ago. I also upgraded my hard drive a month ago. I reverted back to the stock ram and it booted fine. But when I use the new Crucial 8GB (2x4GB DDR3_1333 PC3 10600 SODIMM 204 pin) ram kit, it just hangs in the white boot up screen, while the little grey refreshing dashmark circle is going around. Any ideas of how to get it to boot with the ram I have? Or could it just be faulty ram that I need to get a refund on?
Thanks

Your Mac actually is supposed to use 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMMs. Sometimes faster modules will work, sometimes they won't. In your case it looks as if the faster RAM isn't working. Crucial should exchange it for your without any problems. You their System Scanner tab at Crucial and find out what memory is 'right' for your Mac and swap what you have for that.
Clinton

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Problems booting into OS 9.1 after upgrading to Geforce4 Ti4600

Similar Messages

Maybe you are looking for