Problems by printing in background

Hi experts,
we have a problem by printing a smartform. The problem is in authority check of an object. When we run only the print preview, everything is working fine. But when we run the direct print it looks like, that the authority check is skiped. The direct print is running in background in update task.
Do you know where is the problem?
Thanks,
Pavol.

The problem may be with the location of the code for authority check written.
Write it just before calling the FORM.
Or try to debug to know the reason of skipping the code.
Regds,
Anil

Similar Messages

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem in Print Out of Excise register RG1

Dear all,
We have a business scenario as follows:
1.Production Order Confirmation-101, 261 for receipt
2. Scrap Receipt-262.
For Scrap Sales:
The entry in RG1 should be Scrap receipt (262) and then despatch of scrap i.e issue(601).
During updation we do the following:
We receive scrap in RG1 register through RMA classification. Then we issue the scrap in RG1 register through IDH Classification. The register also get updated and extracted successfully.
Problem: While printing of RG1 register there is no entry for Receipt (262) and issue(601) of scrap.
Regards,

Can anyone pls suggest how to capture Scrap sale in RG1.

Problem with printing in character mode

Hi
I got a genuine problem in printing continous payslips using character mode with a TALLY6050 printer.
I guess there is a problem with the page setup when i try to print via windows. using different sizes of paper (Letter, A4, A3), the printed data is shifting from one page to another but the shift is following a same trend.
i tried to put one payslip per page using page breaks, but in vain. Three payslips are being printed on one page when viewed in the print perview.
Can anyone suggest any help or tips so that i can solve this problem?
Thanks for your help
Bhavish

Thanks for your response. I went ahead and filed a Correction Action Request for your orignal issue, since I was able to reproduce the same behavior when I ran your VI. The solution of printing the front panel of a subVI displaying the same graph is a workaround for this problem. Please look at the following KnowledgeBase for more details on how to do this. Hope this helps!
How Do I Print a Single Control from the Front Panel (for example, a Graph)?

Date problem in printing

Hi frnds ,
I in my mail i am having problem to print the date .
i dont know but some times it is displaying as
2008//0/4 instead of 2008/04/13
or sometimes for some other documents
it is printing the currect date
I am also having problem to print a char variable . It is getting truncated . like only rohit istead of rohit gupta .
Plz Help

Rohit,
I guess you have chosen wrong forum.
Well provide some info:
1. how you are accessing the mail is it send mail activity or FM
2. How data is getting populated into mail.
If you are using send mail activity then check that how you are passing date to it, It might be possible that it is wrong binding happening between containers.
In case of FM you gotta debug it.
Cheers
Jai

TO not printing in background processing of process message

Dear Experts,
We are using PI sheets and process messages to do GR (WM) and then put away to a destination storage bin. TO is getting printed in the default user profile printer when user is manually sending process message in CO54. But not getting printed when processed by a background job(RCOCB004). We tried even after maintaining the printer in background user but of no use. It only generates the spool and no direct print happening. Kindly let me know if this is the std SAP behavior and any way to control this.
Thanks
Rijil

hi, thanks you reply.
default delete job is ok.
but
default archive job does not work.
the followding error occured in log.
Executing ArchiveJob (arvhive job) failed. Reason: java.lang.NullPointerException
and i have configed something according to:
[http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm]

Problem in Printer HP LaserJet 2055

I have Problem in Printer HP LaserJet 2055 " It become Slow in printing after printing few papers " please Tell Me How to solve This Problem .

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
http://www.notaryrotary.com/archive/forum/2005/October/Slow_Printing_Problem_Resolved_If_anyone_is_i...
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems with printing( hp Color LaserJet)

Printer HP Color LaserJet 1500L under Mac OS 10.4.2 Tiger refuses to work normally. It prints 1 or sometimes 2 sheets of paper and then it stops working. All other tasks just move from the active category into completed one without any printing. Printer's indicator starts to wink but then it stops and nothing more happens. The next printing begins only after switching the printer off and on or after restarting operation system. After this it prints 1 or 2 pages and everything begins again. We tryed to use standart drivers which were attached to the printer and the drivers which we downloaded from the HP official site. There is no difference. We tryed to connect the printer to another Macintosh computer under Mas OS X 10.4.2 but the problems didn't disappear. Also we tryed to change USB cable between the printer and the computer. It also didn't matter. Before it the printer worked under Windows XP normally without any problems.

Same printer, similar problems. I get stopped jobs that refuse to print even after I hit the start printing button. There is a message on this site tackling this issue for an Epson printer. Haven’t tried it out yet myself.
MacBook Pro Mac OS X (10.4.6)

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing pdf

IF POSSIBLE REPLY IN ITALIAN
HI, i ve got a big problem.
i 've to create an A0 page in vectorial pdf, which has connected different files: .psd files for the images with transparency, and vectorial .pdf for the drawings from cad.
When i ve created my page, i export that in print pdf high quality.
1° problem: sometimes it fails and tells me there s not enough memory
2° problem: when print pdf is created, the plotter can t load it to print, it stops at 40% loading.
there s a way to make an easy vectorial print pdf?
using vectorial eps instead of vectorial pdf?
using transparent tiff instead of psd?
THANKS

thank you for the fast reply Peter. Im working on an achitecture poster for my last exam, and it contains vector graphics sometimes overlayed on raster images.
i don t like to use illustrator too, im using 3 programs already to create this poster. do u think .ai are easier than eps???
i ve tryed to save new pdf without layers, but it didn t work. then i ve tryed to change pdf with eps on indesign, and now the print pdf saving is really faster. im gonna try to plot it and then i ll tell u what s changed.
OH most important, i was drag n dropping pdf into indesign, and i read it s really wrong! so now i import vector eps to indesign ...
Plot test...
TY

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problems by printing in background

Similar Messages

Maybe you are looking for