Problems exporting from premiere pro cs6

Heeeeeeeeeeeeelp please!
I downloaded my recent project from cs5.5 into a trial version of cs6 and now I'm getting an unknown error (problems compelling video) when I try to export my project (in H.264).
I tried shutting off the auto safe, exporting in a different format (quicktime), restarting offcause, removing effects from the clip where the export failes, even tried exporting without that particular clip, but then it just happened another place in the film at another clip.
I'm thinking there could be an export limit when you're only working with the trial, cause I have been able to export smaller bits of the timeline and as well other smaller projects. I'm a mac user and not that good at computers in general.
I can still export a early version of my project from cs5.5 but I would really love to detect the problem in stead of starting all over since it's my BA project and I'm on a deadline...
I really hope somebody know something helpfull

I been in this same situation for two weeks. First update your software to the latest update. Just released yesterday
I believe you have more than one clip. At the end and begining of the clip you should have little grey triangle shape. They are called handles, meaning extra space at end point and at begining. Usaually for transition. If you dont see it on both clips (as in picture) then the one clip which is misiing need to be trimed little or more until handles disappear or some time you see full triangle (as in picture). Do same if there are more. Then just try to export the ending where clips attach each other. Set in and out points as I did in the picture. Export and make sure to choose sequence in and out setting. here is the picture:
I hope it works. I dont use this software anymore. I had a trail version. Used for two weeks. Every day same problem then finally figured it out and moved back to Edius 6. Thanks

Similar Messages

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

Hi there
My source files in Premiere Pro are 1920 x 1080.
When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
In Encore project area I have these two entries
The encoding settings for the above two entries are
this (for the first entry above)...
and this (for the second entry above)...
It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
How can I fix this? What am I doing wrong?

DVD is 720x576 you cannot change that.
If you want 1920x1080 which is HD you need to make a BluRay.
You can however make an AVCHD disk which is HD on DVD.
About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

MP4 exported from Premiere Pro CS6 runs choppy on some computers . . .

I have a video clip that was rendered as a .mov file in AfterFX CS6. I uploaded it to youtube exported as a 1080p HD MP4 (target bitrate 12, max bitrate 12, VBR, 2-pass) that runs OK on my computer at any resolution, and runs OK on my iPad and 47" TV, but runs choppy on my laptop, and a friend's computer. My computer is a Dell running a Haswell i7, with 24GB of memory and an Nvidia Quadro 2000 video card. My iPad is Gen 4, my laptop is a Lenovo with i5 cpu and 4GB ram, and my friend is running a first generation i7 920 (overclocked) with 12GB of ram. On my computer and iPad, http://youtu.be/lMg-YsVMZHg runs smoothly at any resolution, and the same file runs smoothly on my 47" LED TV from a USB 2 thumb drive. It runs choppy and stutters on my laptop and my friend's machine at even low res. The same file runs a lot smoother with some very slight judder when plugging the thumb drive directly into my laptop and running full screen. What suggestions do you have? Is this a bitrate problem, and what should work with all machines?
Thanks.
Gary Silverstein

The tutorials are downloaded as a zip file then extracted; I don't actually screen record the tutorials while streaming or anything. I guess I couldn't say if variable frame rate was used when they recorded the tutorials, but the media I have shows up as 30fps as opposed to some sort of non-traditional frame rate that often shows up when recording with something at a variable frame rate (like the stock iPhone video camera app).

Error when exporting from premiere pro CS6

I have been using PP CS6 since launch date- and have had none stop problems with exporting, I cant dynamic link, add to render ques or simply export straight from PP!
When i Que my project it will export up until half way and then freeze, i've tried changing the clip, removing effects, everything!
has anyone encounted this problem before?
This is happening with more then just this one project aswell.
These are old projects that were originally created in CS5, could that be causing it?

Thats what i thought!
All earlier projects open, i can edit, manipulate it! do the works! However when it comes to export time! i can't export it to anything! whats the point?!?!
Im really angry, when you pay for something you expect it to do what it was designed to do! and the fact i can't export at all is really really frustrating!

My computer crashes when I export from Premiere Pro cc.? Also, is there a known problem with Panasonic HC-V720 footage?

Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

Ask in http://forums.adobe.com/community/premiere/content
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Audio not transferring to Encore from Premiere Pro CS6

I'm trying to export a sequence through the Adobe Dynamic Link from Premiere Pro CS6 to Encore and the audio is not transferring with video. The video is 30 minutes long with multiple video and audio tracks. The video came through fine, but no audio track. However, I also brought a timeline into the project that was less than 3 minutes and the audio track came with it. Any suggestions/help much appreciated! Thank you!

Yes--that is correct. Audio track in Premiere but no audio track present in Encore. I believe the audio format in Premiere is Stereo. It is HD footage shot on a C-100 camera. The sound was recorded into the camera and all brought in together. I did end up doing the work around that was suggested and just exported an MPEG2-DVD and pulled the audio in manually. But, would love to try to figure out how to make it work directly using Adobe Dynamic Link. Any suggestions are greatly appreciated!

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Exporting from Premiere Pro into Story

Can the metadata etc be exported from Premiere Pro into Story.
For example in the process of roughing out a documentary idea I'm shooting clips and making subclips in bins and developing sequences in this rough style. It would be useful to document this in Adobe Story if such an interface exists thanks...
Many thanks

The closest I can find is here:
http://helpx.adobe.com/story/help/workflow-movies-script.html
Seems like there is a semi-manual solotion ... has anyone used this reverse workflow in anger I wonder and can describe their experience, the results and the potential?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Problems exporting from premiere pro cs6

Similar Messages

Maybe you are looking for