Problems for implement SPED in our system

Hi experts,
We have a question about the SPED solution.
Currently we use the SAP ERP version 4.6B, if we consider to implement SPED solution into our ERP system. is that possible to do that?
If yes, could anyone provide me some information about the challenge or restrictions for our version?

HI,
SAP note no 1258749.
this note will clearify your issues.
above is note is not yet ready hence please check above note next week ....
Reg
Madhu M

Similar Messages

Provisioning problem for AD and SAP ABAP Systems

Hi,
We're using IDM 7.20 SP3 and successfully run he Initial Load for AD, NW 7.30 and ERP 6.0 Systems successfully.
But, when I add the priviledge of systems to a new user created via IDM UI, It is not provisioned successfully.
Job Log show the following errors:
[http://imageshack.us/photo/my-images/69/idmerror1.png/|http://imageshack.us/photo/my-images/69/idmerror1.png/]
The detail log is as follow:
JOB: Update context info
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 682 OK AALASARLI1
JOB: SYNC
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 682 OK 1608
JOB: Set task to error state
Provisioned entries - Successes: 0 Failures:1
MSKey AuditID Status Info
9910 682 FAIL uSkip Called to skip entry
JOB: Skip pending operation
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 683 OK not-existing-mskey
JOB: Trigger notification: assignment failure
Messages Warning Executing sap_core_getSkippedOK() got RuntimeException - org.mozilla.javascript.EvaluatorException: uSelect(select top 1 avalue from idmv_value_basic_active where attrname='MX_ATTRIBUTE_VALUE' and mskey=not-existing-mskey) got exception com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'not'. HINT: Check line 20 in the script sap_core_getSkippedOK
Provisioned entries - Successes: 0 Failures:1
MSKey AuditID Status Info
9910 683 FAIL Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio
any idea?

Hi,
The entries created when I updated a user (person) and add a priviledge, following entries created in audit table
Task_name     Provision_status     mcmv_mskey     Message     mcmv_ProvStatus     mcmv_taskid     mcmv_privatetask     IDStore
Modify Identity     OK     1608     NULL     1100     2578     0     2
Provisioning     Failed     9911     uSkip Called to skip entry     1101     601     0     2
Pending Operation Failed     Failed     9911     Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio     1101     898     0     2

SOAP Fault Problem for WAS 6.20 System

Hi,
We are exposing some RFC enabled ABAP function modules as web services in a WAS 6.20 system.
We are trying to have all consumers of our web services use the SOAP faults to handle errors.
It works great when we raise exceptions from the function module.
However, we are having an issue when an ABAP dump occurs. It sets the SOAP fault properly,
but the XML return has extra data at the end that is causing our .NET developers problems when
trying to handle the SOAP fault.
Here is the Original(raw) XML:
<?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode> SOAP-ENV:Client </faultcode>
<faultstring> Internal Server Error </faultstring>
<detail>
<rfc:Error xmlns:rfc="urn:sap-com:document:sap:soap:functions">
<type> RABAX_STATE </type>
<message> Divide by 0 (type 1). </message>
</rfc:Error>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
sword" value="" size="8"/>
</td>
<tr>
<td> Language:</td>
<td>
<selectname="sap-language" class="pulldown">
<optionvalue="EN"> English</option>
<option value="DE">Deutsch</option>
</select>
</table>
<input type="submit"value="Anmeldung">
</form>
</body>
</html>
The HTML data at the end is causing the problems for our .NET guys.
We have a 6.40 system in development for roll out sometime next year and we don't have this
problem on that system. However, since we are exposing web services on our 6.20 system, we'd
like to get our standards in place now, so that our consumers won't have to change after
the upgrade.
Any information on how to turn off this extra data on a 6.20 system would be appreciated.
Thanks,
Jeff

Hi Andreas,
SOAP 1.2 is not supported, neither in WebAS 6.20 nor in 6.40 as far as I know support is not planed even for next magor release...
The only what I can propose you is to create an OSS and check what shall SAP answer you,
or to downport your applicaiton.
Regards, Angel

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Hi , We are in 11.5.10.2, recently, one of our OU was sold but still we have given the option to use our system for 6 months inorder to support their business. Now, we dont want those receivables transactions to be posted to out company accounts.

Hi , We are in 11.5.10.2, recently, one of our OU was sold but still we have given the option to use our system for 6 months inorder to support their business. Now, we dont want those receivables transactions to be posted to out company accounts.
How to handle this situation in oracle now.

How To: Direct Message and ArnettH_VZW

Have Operating System 10.6.8, Mail Program 4.6. How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use. In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the App

Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use.
In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the AppIe community.
In order to confirm that you are the rightful owner of this account, we recommend that you click here: My Apple ID.
I received this e-mail during the night and wondered if is genuine?

It's a scam to steal your Apple ID and password.
Delete it.

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation. I keep getting this message trying to view how to videos on my new iPad mini, does the new full size iPad have the same lim

'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos. Does the full size iPad support video play back?

iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
 Cheers, Tom

Which operating system has the least problems for IPad

Which operating system has the least problems for IPad? I have 3.0 and probably should upgrade. Thanks

You're using an original iPad? Definitely upgrade to the newest version of iOS. Many apps will require iOS 5.1.1 and it will run fine on your iPad.

Is our system not up for the job? FCP 5.04 &amp; AF-100

Getting the sneaking feeling our set-up is not robust enough for the the task at hand.
-Our system: PowerMac G5 Dual 2ghz (not intel), FCP 5.0.4/Studio
-Footage shot on the Panasonic AF-100, 1080p.. We have been given the footage as QuickTime files, dimension 1920x1080, created using AppleProRes422 codec. The files are huge, some as large as 5GB.
-Final project to be for DVD release, probably 4:3.
Able to watch footage in the Viewer, but it all goes to pot once the cutting begins. Sync slippage, stuttering playback, motion artifacting, unrendered, poor quality image...
We have tried a variety of sequence settings but are unable to get an satisfying, acceptable result and are alas suspicious our system and version of FCP are just not up for the intense processing.
Help? Guidance? Suggestions? Work-arounds? Scotch on the rocks?
Plenty of Gratitude for your consideration and wisdom. Thank you.

>Getting the sneaking feeling our set-up is not robust enough for the the task at hand.
You are correct, sir!
FCP 5.0 only worked with two HD formats natively: DVCPro HD and HDV. ProRes wasn't even around until FCP 5.1 had come and been replaced by FCP 6. So you're at least two versions behind considering what you're trying to work with.
You could try converting the AF-100 files to DVCPro HD and edit that. I'd at least give that a shot. Otherwise, consider renting a newer Mac with FCP 6 or 7 installed of this job.
-DH

Best way to implement accounts for multiple orgs within our company

I'm looking for some guidance as to how to configure/setup our clients in TCA for multiple orgs in our company.
Example:
We have 2 orgs in defined in our ERP. One is called Interactive, the other is called Traditional.
We want the general ledgers separate for these orgs
We want orders placed by clients to roll up to the correct org
We have clients that place orders for both Interactive products and Traditional Products.
For a single "client" that does business in both orgs, should we simply create 1 party and 2 customer accounts? Then use the org_id field in hz_cust_accounts to specify the organization code?
Or should we have a single customer account for that party, with 2 customer sites defined at the org level? Or do separate them at the site_uses level?
Help.

Dear,
I think for each account, you can have 1 bill_to site use. If you want to differentiate between them considering rollup to GL, then i guess defining 2 accounts for each customer would be you best shot.
regards,

Issue in Process Controlled workflow for Shopping cart in Quality system.

Hello All,
I ahve configured a Process controlled workflow in SRM 7.0 with custom resolver, and I am facing an issue taht the Workflow works well in Development but in Quality the approvers are dropped after SC is ordered in Quality system.
The SC Workflow drops the approvers picked up from the Interface method /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP and IF_EX_WF_RESP_RESOLVERGET_APPROVERS_BY_AREA_GUID of BADI /SAPSRM/BD_WF_RESP_RESOLVER. The approvers can be seen in the shopping cart Approval preview Tab until the SC is ordered.
I have compared the OSS notes relevant for Workflow, all of them have been transported, Also I compared and checked general Workflow settings, BRF Config and Process level settings in Dev and Quality, everything is same.
Also while debugging; the approvers can be seen in the decision set table in the create_process_forecast method of class /SAPSRM/CL_WF_PROCESS_MANAGER.
Kindly let me know what else i can check to find the root cause.
Thank you in advance for help!
Regards
Prasuna.

Hello Vinita;
Thanks for the input and sorry for the not so "ASAP" reply;
From what I'm seeing in from your 2 screenshot, i strongly believe that the problem is even before the Z implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID (in which the FM i ZSRM_GET_USER_FROM_PGRP is called. I think the problem could be in the process level determination ZSRM_WF_BRF_0EXP000_SC_APP100. Let me explain:
In your cases where not buyer is determined, in the approval tab there is not even a process level for buyer approval. If the problem were indeed in the implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID then the process level would be there, but the system will display, instead of the name of the buyer(if the buyer determination fails) a red label with the message: "With the strategy "Buyer determination" an approver could not be determined (or something like that..please check the image at the end of the text)".
I can propose a way to discard this: Implement the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS of class ZCL_BADI_SC_WC (in case you didn't know, in this method you can specify an "default" approver in case that the determination of approver in GET_APPROVERS_BY_AREA_GUID fails). The idea is to specify an default approval and see how it behaves:
If the user you indicated in the method GET_FALLBACK_AGENTS appears as approver, then yes, the problem is arises from implementation GET_APPROVERS_BY_AREA_GUID, in which case it could be a data problem (peharps in pposa_bbp?). You could also check in TX SU53 with the users with this problem to see if there's a missing authorization objetc.
If, in the other hand, the "default" approver is not shown, it means that the process level buyer determination is not even called, so you should check in more detail ZSRM_WF_BRF_0EXP000_SC_APP100 and /SAPSRM/CL_WF_PROCESS_MANAGER > Determine process restart –method ----- (i have never used this method, so i could not tell if it could be the source of the problem).
Also, you could implement the method GET_FALLBACK_AGENTS in this way so the default approver would be the WF administrator indicated in the customizing (or you could just append directly any user you want):
METHOD /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS.
   DATA: lv_admin_expr TYPE swd_shead-admin_expr,
         lv_admin      TYPE swd_shead-wfi_admin,
         lv_admin_type TYPE sy-input,
         ls_agent      TYPE /sapsrm/s_wf_approver.
   CALL FUNCTION 'SWD_WF_DEFINITION_ADMIN_GET'
     IMPORTING
       default_admin_expr = lv_admin_expr
       default_admin      = lv_admin
       default_admin_type = lv_admin_type.
   ls_agent-approver_id = lv_admin.
   APPEND ls_agent TO rt_agent.
ENDMETHOD.
Error of agent determination:
Please let me know the result of the test with the implementation of method GET_FALLBACK_AGENT. By doing this we could ensure if really the problem is in method GET_APPROVERS_BY_AREA_GUID or before. I just made the test in our system and I'm almost sure that you wont get the default approver, but i could be wrong.
Any question please let me know.
Best regards
Cristian R.

Implementing Nakisa on HCM system

Hi All,
We have ERP EHP4 (HCM) and poral EHP1) systems in our landscape. Now our plan is to implement Talent Management with Trex and Nakisa. As this is a new activity for me kindly help in planning out the Implimentation of Talent Management in our Systems.
If possible please provide me with some guidelines and document to gather the information. Basicall I want to know how to go about installing the above applications in our systems.
Please reply ASAP.
Thanks in advance.

Thanks Luke...
But there is an error while checking the preview in my Portal system:
Portal Runtime error :
Exception ID:04:42_04/10/10_0013_8555550
When I check the log with the said exception ID it says:
Exception ID:04:42_04/10/10_0013_8555550
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.nakisa.portalcontent/com.nakisa.iViews/com.nakisa.portalcontent.jobarchitecture
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : KotakondaS
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.protocol>://<System.server>:<System.port>/<System.uri>/<Id>?<Authentication>&Language=<Request.Language>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 20. Cannot process expression <System.server> because Invalid System Attribute:
System:    &#39;SAP_LocalSystem&#39;,
Attribute: &#39;server&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.doPreview(AbstractPortalComponent.java:240)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:168)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 27 more
Full Message Text
Content pass of Application Integrator failed.
Component Name:       'com.sap.portal.appintegrator.sap.Generic',
Context Name (iView): 'pcd:portal_content/com.nakisa.portalcontent/com.nakisa.iViews/com.nakisa.portalcontent.jobarchitecture',
Top Layer:            'Generic/SSOLayer',
Producer ID (FPN):    'null',
System Alias:         'Nakisa_System',
Kindly let me know if the issue is related to SSO configuration from NAKISA.
Thanks in Advance

Problems for implement SPED in our system

Similar Messages

Maybe you are looking for