Problems formatting the partition in Windows XP

I'm trying to install Windows XP Pro (SP2, OEM version) through bootcamp. I partition the hard drive (115gb) using the assistant and then start the installation. I get the screen that asks me to select the correct partition and I choose "C: Partition 3 <BOOTCAMP> [FAT32]". However, according to the bootcamp installation guide, I should then see a screen that allows me to format the partition for Windows XP where I can select "NTFS (Quick)". The problem is, I'm not getting this screen. After I choose "C: Partition 3..." it jumps straight into the install and I never have the opportunity to format the partition. Any ideas on whats going wrong?

Hi and welcome to Discussions,
with newer Windows CDs/DVDs there seems to be sometimes a problem with the needed re-formatting during installation.
Here's a solution for such problem comes up: http://discussions.apple.com/message.jspa?messageID=9771900#9771900
Regards
Stefan

Similar Messages

  • Boot camp does not format the partition for Windows 7

    I recently purchased a copy of windows 7.  This is the full version.  I downloaded the drivers to a usb drive then placed the windows 7 disk in my apple optical drive to partition to disk.  After portioning the iMac restarts and gives the a blank screen with _ blinking.  It seems as though the windows partition has not been formatted.  I cannot enter a dos command such as format or anything else.  If I start up the mac again with the windows 7 disk in the optical drive I will be prompted to insert a bootable disk.  I understand that after the partitioning takes place that bootcamp should start the installation process.  By the way after working on this for quite a long time I decided it might be the copy of windows so I returned it and got another.  Same resuts.  I hope someone can help.
    Thanks

    Read the instructions and it is pretty clear that you format to NTFS where you see the BOOTCAMP partition.
    All the articles and how to are here:
    http://www.apple.com/support/bootcamp
    Boot Camp 101

  • Need to format the partition for Boot Camping to NTFS.  How do I do this?

    So yes, I have searched online to find a way to format the partitioned to NTFS so I can Boot Camp my Mac Mini and have found nothing that I can use.  Instead, all I have found are horror stories of others messing up their Macs when doing this.  I want to be sure I do this as correctly as possible because I do adore my computer.
    For Boot Camping, I have followed the steps and started the installation of Windows 7 but when it comes to choosing the partition it says I can't because it's not in NTFS format.  Any help on this would be greatly appreciated.

    Heh! Yes, it's one of those things that are simple, once you know where to look. Glad you got it figured out.
    You won't quite be done once Win 7 is done installing. You'll notice that the graphics in Windows likely won't be very good, and in general running kind of slow. That's because the Windows DVD had no drivers for Mac hardware.
    So you need your Snow Leopard disk. Either the first gray disk your Mac came with, it if shipped with Snow Leopard, or the retail disk you purchased.
    From the Windows 7 desktop, put the Snow Leopard disk in the drive. Windows will pop up the usual message about what you want to do with an external drive. Choose "Run Setup". It will run for a while as the drivers for your Mac hardware are installed for Win 7.
    Once that's done, you'll have menu icon for Apple Software Update. Run that to see if it needs to download and install any other Boot Camp updates, which would any updated Win 7 drivers for you Mac.

  • Problem with the audio editor window into logic pro X

    hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
    Alain

    'onglet' - great, my favorite when visiting restaurants in France!
    Anyway, I think you have to activate Advanced tools first:
    http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
    Have a nice day!

  • After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

    After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • After the installation of Lion I don't see the partition with Windows 7. The solution?

    After the installation of Lion I don't see the partition with Windows 7. The solution?

    Let's be real clear here -- are you saying you are using Internet Explorer and when you try and download Mozilla Firefox it gets around 75% through and shuts down?
    If so there is something wrong with your computer -- or at least IE. I rarely, if ever, recommend this, but it might be time to reformat your hard drive and reinstall your OS (if you are even thinking about doing this the first thing you must do is back up all your data files, preferably to writable media like DVDR or CDR).
    If you have a friend with a computer perhaps you can get them to download both the latest iTunes as well as (more importantly) the latest firmware updater, and then install them on your machine (they can write them to their own CD).
    The other thing that occurs to me is you might not be logged in as admin on that computer -- make sure you are doing this and are the only user.
    Otherwise my brain is fuzzy right now -- perhaps someone else can jump in after you reply (I'm right in the middle of packing for a cross country move and only able to spend about five minutes a day on this board).

  • Macs don't show me created the partition for windows. And if through Bootcamp that says "No bootable device found" . Please HELP.

    Shared disk (Tried 2 methods BootCamp and Disk Utility) to install windows, but the section is not shown, to be precise, when you turn the Mac while holding Alt key shows the partition for system restore and disk partition with OSX, and not created by me. If you try through Bootcamp that actually says "No bootable device". What could it be? I have a macbook pro 371ll/a, OSX 10.9.5 . Thanks for the reply.

    Thank you! All established, but a new problem with Windows 7 partition. If you install Windows on a Mac, say you gave 30GB on widows, after installation you have 2GB from 30GB, while the size of the files in Windows is 18 GB, should be free 12 from 30. Hidden files on large amounts of no (100 MB all hidden files together). Know that there is a disk which reserves memory for the system, but I don't have, I look through the taskbar there is a disk with osx and bootcamp and all. What could it be, if you of course know.

  • When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

    After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
    The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
    Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

    I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

  • How large should I make the partition for Windows XP?

    I am mainly using it for light gaming, the partition means how much of the hard drive is used for windows and windows-based programs/games it can use, right? What does Windows alone need, and what would you suggest? I have about 100GB total disk space left on my macbook.

    This will in part depend on the copy of Windows XP you are using to install. If it is the absolute latest copy you could get it should come with SP3 built in, which will reduce the amount of space necessary. If it is Windows XP SP2 or earlier, you will need significantly more space. I suggest 4.5 - 5 gb just for XP alone, especially in the latter case. After that, find the maximum space that your programs can use on installation, add it all up, and add at least 10% to that. Next, take your amount of physical RAM and add at least that much to your previous total (this accounts for the pagefile). That would be your bare minimum to allow for Windows XP. As long as you don't expect to store significant amounts of data via Windows, that amount can be all you need.

  • Problems with the sound in Windows

    Hey everybody, hoping someone can help.
    I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
    I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
    I have tried various display settings. I have no idea if this is just me or a common problem.
    Thanks in advance...
    MacBook Pro 2.16 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
    Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
    MAC PRO   Mac OS X (10.4.9)  

  • Expanding the partition for windows

    I never thought I would use the Windows program that much...  Now I have run out of space -- can I expand the partition without having to re instal?
    Thanks

    go to disk utility, check the hard drive, select the top of hd icon, check partition.
    easiest way is to check the windows partition bottom bar, and drag it down to give more space.
    if the partition already fully expanded, then its simple.
    drag up bottom of the mac partition. i believe you need to erase windows partition and then made a new partition and fresh re-install.

  • The larger the partition for windows, the slower it will run?

    Hello Everyone,
    Someone has told me this was the case, The larger you put your partition for windows, your computer or windows will run slower. Is this really the case? i was planning to make windows 500GBs and Mac 500GBs, will this cause any issues?
    Thank You

    Yep, even if you put them to 500GB each.
    If this were true, 500+GB hard drives wouldn't be very popular. Also, IF there is any connection between HD size and speed, it'd be very very hard to notice. Generally, at least in the past, HD's with more storage feature slower drive speeds, so this is potentially where this untrue statement came from, however, I do believe that is a thing of the past and Windows will run fine on your 500GB partition, without any noticable speed difference from a smaller sized partition. The drive still spins at the same speed, regardless of partition size.

  • Problem after the uninstall  of windows with the bootcamp assistant!!!!

    I have too problems: The first is my bad english i like to excuse for that. I hope you can even so understand my main problem. I try to describe it to you: I install windows on my mac. After a short time i decide, i don't like it and i uninstall it with the bootcamp assistant. Than i want to start my mac but it didn't work. My mac want to start windows even though I install windows.
    I think there is something that isn't uninstall but i don't no where and what i can do against this problem???

    If you can't boot into OS X, then hold down the Option key on startup, and select your OS X partition.
    After that, do what the above poster said, so that the Mac knows to always boot to that volume.

  • I got problem whit the detonator and windows XP (K7T Pro2 Ver:1.0)

    I have windows XP, when i install the drivers for Geforce 2 MX 200 and reboot the machine for frist time I NEVER SEE MY WINDOWS ANYMORE!!!!
    I have:
    MSI K7T pro 2 ver: 1
    512MB SDRAM PC 133
    Sound Blaster PCI 128
    Geforce 2 MX 200 (32MB)
    Amd 1.2 GHz
    Windows XP
    PD: HELP!!!!

    I had similar problems a while back.. the problem was that the refresh rate was to high and it wouldn't go into 60Hz even in safe mode.. I switched the monitor to a newer with PnP and then the driver lowered the refresh rate.. (I had hacked together a own .inf file for the first monitor and it has only BNC so no PNP)

  • Itunes doesn`t recognize my 80GB ipod  classic.it appears in my computer but it says i must format the disk."windows was unable to format".what should i do to make itunes recognize my ipod?

    help:)

    Can you check what is the current format of  your iPod?
    http://support.apple.com/kb/HT1335
    Have a nice day!

Maybe you are looking for

  • Multiple Key Pressing

    When I hold Tab + w space doesn't work click (I have my controls set as this for a game). Is there anyway to make it so i can hold those two keys and have spacebar work? Im on a MacBook Pro Retina 13 inch with latest version of yosemite Thanks for th

  • Slow 2015 mac mini

    Hi all, Got a mac mini that I've had about 3 months. I was brought to replace the 2007 imac I had. I installed the mini by restoring the old time machine back up. I don't use it for much power hungry stuff (web, email, excel etc) but not all at the s

  • Flash act like iFrame

    I am new to Flash and I was wondering if it is possible to create a flash that acted exactly as an iframe meaning a simple form that onload opens up another url.

  • Trying to make a testbench to check output values from I/O node

    Hello there! I am trying to make a testbench for a I/O node with analog and digital signals. I want to look at the output and see what i get. I have already made the code for the FPGA and the testbench code but it seems like i don't get them to work

  • Using ALSM_EXCEL_TO_INTERNAL_TABLE

    Dear experts, As my scenario, I have a web dynpro, and what I must do is import an Excel file from client to SAP back-end. I created a BAPI using the function module ALSM_EXCEL_TO_INTERNAL_TABLE to import Excel data to internal table and then process