Problems getting itunes 7.0.2 to work!?!?!?

Just bought a new Dell computer....Stuck with dial up service through AOL. Spent the last 5 hours downloading the new itunes for windows XP onto the computer to only have a box pop up saying:
Windows has found a problem.....File blocked due to no digital signature unknown publisher.....Due to this we cannot get into the Itunes store or anything...It seems that the computer is saying that there isnt a digital signature with the download saying that it is safe to run on the computer?? I just know we are going crazy trying to figure this out!? Any ideas?? Anyone else with this issue?
And when we try to go to the itunes store it shows our account and the $$$ on the accout sitting there, but when trying to get into the store it says it is busy or check your internet connection, This has been the case now for over 24 hours so I doubt the store is "closed" and the internet is working fine. HELP!!!!

I've been having the same exact issue. It occurs regardless of whether I try it directly from iTunes or go to the Apple site and download it there. Help please!

Similar Messages

I am havign huge problems getting itunes 11.1.4 working on my windows 7 laptop. I have run itunes for some years, and regularly updated it when prompted. I have followed many of the suggestions e.g. uninstalling reinstalling, etc

I have spent hours trying to get itunes working on my laptop.
The only functinoality I crave is to be able to get pictures off my iphone 5 (which has the latest ios installed.), as almost all other functinoality of itunes I find painful beyond belief. It has the worst ergonomics I think of any software I have ever used, which is bizarely at odds with the mobile decvices, which by and large work quite nicely (indeed, why I bought them!)
My laptop runs windows 7. It has all the latest microsoft updates installed (I am religious about this: it always has had.)
I have run itunes on this machine for some years, regularly updating when I am prompted to.
A few days back i was prompted to update to 11.1.4
It failed to install badly. whatever I try at some point during the install process the installer just hangs, or never terminates.
All communication between computer and iphone functionality has been lost.
Nothing eles on my machine is behaving oddly. slowly etc. it is only apple stuff that isn't working.
I googled and found a lot of recurring themes on apple forums:
So far I have tried:
uninstalling / reinstalling. (hangs during installation).
Restarting the machine between uninstall and reinstall.
Searching and removing any directories/ contents related to apple, after the uninstall, prior to machine reboot.
I have even used iobit uninstaller, as removing apple software as you know is almost impossible (ever tried disabbling the quicktime updater that runs at startup? it's like a virus !!)
I have removed all apple software incl quicktime.
I have tried the microsoft software installer fixit link often posted to.
i have tried unpacking the apple installation file, using the latest version of winrar, to try installing one at a time.
I have found the installation is very very very slow (it looks as though it hangs, but i leave it running in the background, after 15-20 minutes, the status starts advancing for example). so far I have managed to install the first few components up to applesoftware update,msi, and they seem to need to be run multiple times.
(this last one took about 40 minutes).
I have been very careful to install / uninstall the software components int eh "prescribed" order.
I have tried each step multiple times, rebooting the machine numerous times, cleaning temp folders (with ccleaner) etc.
I ave tried installing when my virus checker AVG is disabled.
(i have virus checked the machine with AVG and malware bytes, I have the latest microsft security essential updates installed.)
I ahve tried stopping apple services (as suggested in one of the apple forum posts).
As you can gather I'm seriously tearing my hair out.
I presume there is some kind of generic bug in this installer: as a friend had exactly the same problem on sunday night, with a different machine, running windows 7, and a couple of her colleagues at work has had the self same problem over the weekend, though none of them seem to have gone to the lengths I have yet !
I tried doing a system restore, but my machine seems to have lunched all previous system restore points, so I can't . Arrrrrgggg !
Is an older version of itunes available so i can install that instead ?
What should I do next ?
Jonathan

I have spent hours trying to get itunes working on my laptop.
The only functinoality I crave is to be able to get pictures off my iphone 5 (which has the latest ios installed.), as almost all other functinoality of itunes I find painful beyond belief. It has the worst ergonomics I think of any software I have ever used, which is bizarely at odds with the mobile decvices, which by and large work quite nicely (indeed, why I bought them!)
My laptop runs windows 7. It has all the latest microsoft updates installed (I am religious about this: it always has had.)
I have run itunes on this machine for some years, regularly updating when I am prompted to.
A few days back i was prompted to update to 11.1.4
It failed to install badly. whatever I try at some point during the install process the installer just hangs, or never terminates.
All communication between computer and iphone functionality has been lost.
Nothing eles on my machine is behaving oddly. slowly etc. it is only apple stuff that isn't working.
I googled and found a lot of recurring themes on apple forums:
So far I have tried:
uninstalling / reinstalling. (hangs during installation).
Restarting the machine between uninstall and reinstall.
Searching and removing any directories/ contents related to apple, after the uninstall, prior to machine reboot.
I have even used iobit uninstaller, as removing apple software as you know is almost impossible (ever tried disabbling the quicktime updater that runs at startup? it's like a virus !!)
I have removed all apple software incl quicktime.
I have tried the microsoft software installer fixit link often posted to.
i have tried unpacking the apple installation file, using the latest version of winrar, to try installing one at a time.
I have found the installation is very very very slow (it looks as though it hangs, but i leave it running in the background, after 15-20 minutes, the status starts advancing for example). so far I have managed to install the first few components up to applesoftware update,msi, and they seem to need to be run multiple times.
(this last one took about 40 minutes).
I have been very careful to install / uninstall the software components int eh "prescribed" order.
I have tried each step multiple times, rebooting the machine numerous times, cleaning temp folders (with ccleaner) etc.
I ave tried installing when my virus checker AVG is disabled.
(i have virus checked the machine with AVG and malware bytes, I have the latest microsft security essential updates installed.)
I ahve tried stopping apple services (as suggested in one of the apple forum posts).
As you can gather I'm seriously tearing my hair out.
I presume there is some kind of generic bug in this installer: as a friend had exactly the same problem on sunday night, with a different machine, running windows 7, and a couple of her colleagues at work has had the self same problem over the weekend, though none of them seem to have gone to the lengths I have yet !
I tried doing a system restore, but my machine seems to have lunched all previous system restore points, so I can't . Arrrrrgggg !
Is an older version of itunes available so i can install that instead ?
What should I do next ?
Jonathan

HT4437 Can't get iTunes and monitor mirroring to work at the same time.

When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
Ak

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

I'm having problems getting adobe flash player installed and working on my kindle hdx fire?

Can someone please help me, I'm unable to get flash player installed and properly working on my kindle fire. Is there anyone that knows how to?

There may not be any Flash Player for your device, depending on its operating system & version; see Adobe Developer Connection - Flash Player Certified Devices

Problems getting an external hard drive to work on the new Airport Extreme

I have spent hours trying to get my 320GB external hard drive to work with the new airport extreme 802.11N. I have spent hours pouring over all of the posts here discussing possible solutions, all of which have not worked. This morning, however, I gave it another try and FINALLY, I have it working. I tried something simple. Here it is:
Using the Apple Disk Utility Program, I formated my drive using the MS-DOS mode, called my Hard drive "ItunesHD". It took about 20 minutes to complete (i'm assuming because of the size of the drive). I then unplugged the router and hard drive, turned on the hard drive, then the router. After my macbook pro reconnected, I clicked on the iDisk utility icon in my menu bar, provided my password and FINALLY saw the network drive icon on my desktop!!! It seems that formatting my drive using MS-DOS compatibility mode finally worked for me. I'm not saying this will work for anyone else who is having this problem, but you can at least try it. I tried all of the MAC formatting options and have had no luck.
What I would like to know now is (..if anyone has these answers, please let me know):
1. What is the maximum SINGLE drive capacity that this router will understand...500GB, 1TB, 2TB? I would like to get the biggest bang for my buck.
2. Keeping #1 one in mind, I purchased an Apple TV (still waiting on it to arrive) and I would like to know if it will read multiple hard drives connected to the Airport Extreme router (...say (2) 500GB hard drives). I know you can have multiple libraries in iTunes (which to me is a cheesy solutions, there should be an option in the preferences that would allow you to save your music in one place and your movies in another). Anybody have any idea on this one?
I basically want to rip all of my dvd movies on a big hard drive connected to my airport extreme to use with my AppleTV , so I just need to find out about the maximum size and hooking up more than one hard drive and getting the AppleTV to recognize them all.
thnks
MacBook Pro Core Duo Mac OS X (10.4.8)

Sorry you had so much trouble hooking up a hard drive to the base station. I've done some experimenting with the feature and this is what I've found out.
You can use either the native Mac format, Mac OS Extended, or the Microsoft format known as FAT. Apple calls FAT, MS-DOS File System in Disk Utility.
If you use Mac OS Extended, the Macs on the network will be able to connect to the drive using the native AFP (Apple File Protocol) or the Microsoft native SMB (Server Message Block) protocol. PCs will only use the SMB protocol of course.
If you use MS-DOS File System both the Macs and the PCs will only use SMB to connect to the drive over the network.
Basically I've found everything works as expected with regard to volumes connected to a network.
One thing I don't have installed is the iDisk Utility. I'm wondering if it may be the cause of the problems you were having. But reading through your post it may also be the difference between expected behaviour and the proper procedure for discovering and mounting network volumes. Let me explain.
You only mention having trouble getting the drive to show up on your Desktop, you didn't describe how you went about discovering the network drive. It isn't just suppose to show up on your desktop when you plug it in to the Extreme base station. It doesn't work like the iDisk or disks connected directly to your computer using USB/Firewire.
Normally with network drives you're suppose to either browse for them using the Network icon in the Finder or using the Connect to Server command in the Finder's Go menu, you would type the address in directly for the network volume you want to mount. Try it and see what happens.
Now to answer your other questions.
I don't have a volume large enough to hit any limits the base station may have but I did read a post about someone who said they had a 1.5 TB volume connected and could only see 1 TB of it. They were forced to partition the drive to see all available space and of course the volumes showed up as two separate drives. One thing wasn't made clear though. They didn't say what volume format they were using to format the drive, Mac OS Extended or MS-DOS.
Everything having to do with the AppleTV is just speculation at this point since no one has one yet but from what has been demonstrated so far, AppleTV relies on iTunes. In other words, it won't pull data from network volumes on its own, a computer running iTunes needs to feed it.

Getting itunes songs to play in working timeline

Howdy all. I'm new to final cut express but am learning a lot. I'm frustrated by my initial attempts to layer itunes audio though. I can get the tunes from my library to my working browser...and from there I drag it into my working timeline. However, when I click "play" all I hear is a recurrent beeping sound and not the music. After researching it I think I need to convert the track to an AIFF file, which I have tried to do. That's when I get a message saying my songs cannot be converted to an AIFF. The songs are paid for and legally downloaded through itunes so I'm frustrated as to why this should be. Can someone help me to get my itunes songs into my working timeline so they play?
Thanks!
Jered

Before people get all up in arms about copyright infringement and all, the iTunes agreement specifically allows you to use the audio Products for personal, noncommercial use. You are allowed to export, burn, or copy audio Products for personal non-commercial use. For iTunes plus content, you can copy, store, or burn these Products "as reasonably necessary" for personal, non-commercial use.
Using an iTunes song in a video being created for personal non-commercial use appears to be allowed by the agreement.
While we're on this subject, the original poster didn't ask us whether this was legal or not and it really has no bearing on solving their problem unless the problem is being caused by the digital rights management of iTunes. So, is the iTunes digital rights management preventing them from using an iTunes song or is it simply that it is an mp3 and needs to be rendered before it can be played in the sequence?
I suggest rendering the audio track because I had to do the exact same thing just two days ago (with a non-iTunes mp3). I did not convert the mp3 to AIFF or to a WAV or anything else, but I did have to render it in order to hear anything but a bunch of beeps.

I am having problems getting iTunes to load - if I can't solve this issue I will have to get rid of my iPhone 4S which I don't want to so can someone help me out with this as I'm starting to get really fed-up and paranoid - I need my phone

As stated above - I am having a really big problem with the iTunes 10.6 installer.
First tells me 2 DLL files are missing and then that a program needed for the install isn't there.
I never had a problem withiTunes last year when I had an iPad.
I deleted the iTunes from then because I found the iPad to heavy - I have very severe arthritis
in my wrists. I might as well send my iPhone back to the retailer I got it from if this issue can't be solved.
I'm using Windows XP Pro with SP3 so it should work.
Please can someone help?
Cheers
KnitWit46 in UK

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Problem getting CR for VS 2010 to work

I just downloaded and installed CR for VS 2010, the file is "CRforVS_13_0_1.exe". It seemed to install just fine. But I can't get it to work in my VB .Net 2010 project.
I can select "Add a New Item" and then select "Crystal Report", no problem.
When the new report window appears, it defaults to "Using the report wizard", if I click OK, it locks up VS and I have to use the task manager to close VB.
If I select "As a Blank Report" it's ok and will add a blank report.
But as soon as I select the Database Expert it throws an error saying "External component has thrown an exception" and then VB is locked up.
I have Win7 64bit home premium OS.
I have VS 2005 and VS 2010 installed
CR in the VS 2005 is working fine.
I had a simular problem last november and the response I got was there was I bug in CR when a machine has bot VS 2005 and VS 2010 and it was going to be fixed when the SP came out.
So, it there a SP in need to download and install? Do I need to manually add some references to my project (not sure what references are required).
Any information or suggestions will be appriciated, Thanks

Hi Ed,
Yup I know... The problem is Windows used to use the c:\temp and now it users the temp folders located under the c:\User\ folder structure.
CR uses a wild card \temp to save the temp files we generate. The problem is with the wild cards. The issue now is you should not be using a c:\temp folder according to Windows Rules all temp files should go under the users folder structure.
I actually do the same thing at home and ran into a problem with Logitech's installer, it would complete the install if I set my environment variable to c:\temp. As soon as I changed it back to the Windows 7 default the installer ran fine.
So even though you have been using it for 20 years, and so have I, we have to change to follow the new OS rules. Using any other name like \MyTemp is fine as I first indicated.
Thanks again
Don

HT4527 My old pc ran windows vista and mother board failed but the hard drive was good. I have a new system now and installed the old hard drive. how do I get itunes and all my music working now?

Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.

See Recover your iTunes library from your iPod or iOS device.
tt2

Problems getting PC-to-Mac ethernet to work

My dad recently got a new MacBook Pro, and I am trying to use an ethernet cable to transfer files from the PC to the Mac. However, even though some things are working, the unsuccessful thing is getting the PC to show up on the network list. I have disconnected the PC from the wireless network to avoid confusion, but the MBP is still connected.
Both laptops have gigabit ethernet, and are up to date on updates. I'm trying Internet Sharing as well but that si failing as well.

No need for a special cable these days. Almost all devices can tell which way the traffic is moving and adjust themselves accordingly.
On the PC open a command window and type in 'ipconfig /all' to get it to tell you the network settings. These will include the ip address and the sub-net mask (often 255.255.255.0). On the Mac the same settings can be found in System Preferences / Networking. Both machines really need to be on the same sub-net. Once you know the ip address of both machines.. on the PC command window type in 'ping x.x.x.x' where the x's are the address of the Mac. If all is well you should get some responses and the packets transmitted count should be the same as the packets received. On the Mac, open a Terminal window (Applications/Utilities/Terminal) and type the same command (but using the PC's ip address) you should get the same or very similar result.
If this does not work at all, then the two machines can not see each other and you will have to start again from scratch to set the networking up so that they can see each other.
Hope this helps.

HELP!! I am having BIG PROBLEMS getting the Custom Page Sizes to work!!

I am having a MAJOR challenge working with the Custom Page Size feature in Pages '09. My mom is working on a primer music book for publication, where the page size (for the printer) MUST BE 9" X 12"!! For some reason even though I have set the custom page size to 9" x 12", The document does not appear to have the proper proportions, (i.e. the ration of the width to height IS NOT EQUAL TO THAT OF A 9" X 12" DOCUMENT!!)
HELP!! PLEASE!!
Also, for some reason my Vertical Ruler has COMPLETELY DISAPPEARED!! My Horizontal Ruler (on top) is still there but there is no sign of the vertical one which is CRITICAL for aligning the of the content for publication!!
I took an annotated screenshot of what the document that is +*SUPPOSEDLY 9" x 12".*+ But there is +*NO WAY THAT IT IS ACTUALLY 9"12!!*+
I have also taken some screenshots of a few other Inspector Panels and other things that might help SOMEBODY to figure out what the problem is!
_Link Title_ _Flickr Link_
Front Cover Mock-Up http://www.flickr.com/photos/kmamusic/4085015686/
Metrics Inspector Panel http://www.flickr.com/photos/kmamusic/4084236829/
Layout Inspector Panel http://www.flickr.com/photos/kmamusic/4084235497/
Page Setup Dialog Box http://www.flickr.com/photos/kmamusic/4084990178/
Document Inspector Panel http://www.flickr.com/photos/kmamusic/4084231449/
Annotated 9” x 12” Doc. http://www.flickr.com/photos/kmamusic/4084092849/
I do hope that somebody can answer WHY I am having these problems

Hi kmamusic
Welcome to the forum.
To show your vertical ruler:
+Menu > Pages > Preferences > Rulers > check Enable vertical ruler in word processing documents+
You are right the page does look slightly too high.
The one thing you did not give us was a screen snap of the *Custom Page* you set up in *Page Setup…*
This is what would dictate the actual page size.
Peter

Problems getting the free Suduko download to work

I've got a Curve (8310) and went to download the free suduko application from the owner's lounge.
I got it downloaded and added to my handset, but when I try to open it and play I get nothing but the intro screen. Nothing else happens and it's like it freezes. The only thing I can do is close out of it using the red handset button, which takes me back to the homescreen.
I'd really like to use this application and was wondering if anyone else has had this problem or has an idea how to fix it?
Thanks
LouC
xx

Hi kmamusic
Welcome to the forum.
To show your vertical ruler:
+Menu > Pages > Preferences > Rulers > check Enable vertical ruler in word processing documents+
You are right the page does look slightly too high.
The one thing you did not give us was a screen snap of the *Custom Page* you set up in *Page Setup…*
This is what would dictate the actual page size.
Peter

Problem getting bluetooth apt-x codec to work

Hi fellow mac users,
I recently bought a creative wp-300 bluetooth headphones (comes with Apt-X support) and tried pairing with my macbook pro retina. The process of pairing the device was quite straight-forward and it was completed without much hassle.
However everytime I performed an option-click on the bluetooth icon, it shows that my active codec for bluetooth audio is SCO instead of Apt-X. There was only one instance after I messed about with connecting and disconnecting the device, I managed to get it worked with Apt-X codec. Sadly, I could not reproduce the same results after trying for the past few days.
I have done some research in the forums and I am sure it is not a bluetooth bandwidth conservation issue as I do not use any other bluetooth device except for this headset. Also, in most of the other cases, people seems to be getting their bluetooth headsets to work with SBC codec rather than SCO. May I ask in terms of sound quality and signal consistency (i.e. frequency of losing beats), how does the SCO codec fare against SBC and Apt-X?
More importantly, is there any way that I can always get my creative headset to pair and work with Apt-X codec? It is just kind of disappointing that I cannot make use of this technology when it is clearly supported by both devices (mac and headset).
Regards,
D

Search is your friend: https://discussions.apple.com/thread/3891328?start=0&tstart=0

Having problems getting my fireworks made button to work in Adobe Dreamweaver CS6

Hello, I am currently using a trial version of Adobe CS6 Fireworks and Dreamweaver and I am wondering why my button that I have created with an up, an over and a down state is not working in dreamweaver properly...when I preview my button in Fireworks all is in order and it works fine but when I click copy Fireworks Html of the button, when I paste it into dreamweaver and preview it, dreamweaver doesen't seem to show the over or down states...any help would be much appreciated.

When you created animated buttons in Fireworks and exported/imported them into Dreamweaver CS3, CS5 all worked well.
This is because CS3 and CS5 automatically added the required preload JavaScript to the hed tag of the document.
In CS6, this is not happening!
That is the major reason that your buttons do not work if you are used to doing it the way that we have for years.
As a test, I added the Head tag code that the old versions of CS generated in Dreamweaver and immediately my buttons worked.
It must be a program error in CS6 and I wonder if Adobe will be producing a fix for this?
The Head code is below:
<script type="text/javascript">

</script>

Having problems getting itunes onto ipod, but they took my $$

i recently bought my daughter a 3rd generation nano ipod for her 12th birthday. The first night she had it she used her itunes gift card and successfully downloaded 13 songs. The next night she proceeded to do the same thing, this time 15 songs. The money came off the card, but the music didn't go on the ipod. She did everything exactly as she had the previous night. I attempted to contact itunes, they stated it would automatically download the missing songs when the connection was made. HA HA...still don't have them...any help will be greatly appreciated.

Is the music on the computer in iTunes?

Problems getting itunes 7.0.2 to work!?!?!?

Similar Messages

Maybe you are looking for