Problems in Importing Workbook

Hi,
I am trying to import 4i eex files (Workbook) into Discoverer 10g using OracleBI Discoverer Admin Edition. I am getting the following error "Access is denied trying to modify the Workbook with identifier 'WKBK11_COMMISSION_STATEMENT1'. Logged user (sysadmin) has full privileges.
What is the solution for this problem ?
Thanks,
Karthikeyan.

Welcome to the forum. As Harm points out, AVI is but a wrapper, and can contain all sorts of data inside. This ARTICLE might give you some insight into working with AVI's.
Good luck,
Hunt

Similar Messages

Problem in creating workbook

Hi All,
I have a problem in creating workbook.
After inserting the query and saving as workbook, when the workbook is opened again there is no query inserted into it.
Some values looks like alpha numeric values are populating.
I'm using BEx 3.5 and Microsoft Excel 7
Please help me to get ride of this problem
Thanks and Regards,
Geetha

hi Geetha.
creation of work book is important issue .
1).create query make / assign columns and rows with chars and keyfig ok.
2).check,save,execute.
3).observe output.
4).create work book.
5).select save in query prompt save as new work book.
6).u said my query is not existing ok select find select your info area observe your work book.
7).generally work book can assign to roles.
ok geetha byeeeeeeeeeeeeeeeeeeeeeeeeeeeee...
i think this information may helps u.

Error in problem class important

Hi Gurus,
we are facing problem while activating the transferstructure
when are activating using the program:
RS_TRANSTRU_ACTIVATE_ALL
we are getting
error in problem class important.
All Thaughts are considered.
Regards,
Ajay.

Need tyo make sure the problem is with the query/workbook are general issue with all workbooks/query.
1. Make sure the base query of work book is still executable. RRMX/RSRT.
2. Execute the work book in Bex/Excel and look for definition of workbook; there might be some thing in the workbook referencing other than base query.
3. If other workbook are also not working? need to check if other users have same issue.?
Hope this will help to narrow the problem.
Gopi

Problem class important error while executing Query from favorites

Hi Experts,
1. I have tried execute the query from favorites it is showing the error message. " Problem class important"
In the message text: logs showing error message [Attached the message screenshot].
2. From "Query Designer" Execute [Ctrl+R] gives the error "500 Internal Server Error" [Attached the screenshot]
3. Able to execute the reports from RRMX.
No ST22 dumps. Can any one suggest about...how to rectify the errors.
Thanks in advance...Surya

Need tyo make sure the problem is with the query/workbook are general issue with all workbooks/query.
1. Make sure the base query of work book is still executable. RRMX/RSRT.
2. Execute the work book in Bex/Excel and look for definition of workbook; there might be some thing in the workbook referencing other than base query.
3. If other workbook are also not working? need to check if other users have same issue.?
Hope this will help to narrow the problem.
Gopi

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problem During Importing using DBMS_DATAPUMP

Hi,
I am facing Problems while Importing usinf DBMS_DATAPUMP:
Its not showing any Error but the Tables not getting Imported.
Below is the Code whihc i have written for Import:
CREATE OR REPLACE PROCEDURE Data_Pump_Import_Load AS
ind NUMBER; -- Loop index
h1 NUMBER; -- Data Pump job handle
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
sts ku$_Status; -- The status object returned by get_status
BEGIN
-- Create a (user-named) Data Pump job to do a schema export.
DBMS_OUTPUT.PUT_LINE('COMES HERE');
h1 := DBMS_DATAPUMP.OPEN(operation => 'IMPORT', job_mode =>
'TABLE',job_name => 'RET_IMPORT_TEST');
DBMS_OUTPUT.PUT_LINE('COMES HERE1111');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEXPORTTEST.DMP', DIRECTORY => 'EXPORT_DIR',filetype=>1);
DBMS_OUTPUT.PUT_LINE('COMES HERE2222');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEIMPORTTEST.LOG',DIRECTORY => 'EXPORT_DIR',filetype=>3);
DBMS_DATAPUMP.SET_PARAMETER (handle => h1,
NAME => 'INCLUDE_METADATA',
VALUE => 1);
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'DATA_ACCESS_METHOD', VALUE =>'AUTOMATIC');
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'TABLE_EXISTS_ACTION', VALUE =>'REPLACE');
DBMS_OUTPUT.PUT_LINE('COMES HERE3333');
-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.
-- Start the job. An exception will be generated if something is not set up
-- properly.
DBMS_DATAPUMP.START_JOB(h1);
-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
percent_done := 0;
job_state := 'UNDEFINED';
WHILE (job_state != 'COMPLETED') AND (job_state != 'STOPPED') LOOP
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
IF js.percent_done != percent_done
THEN
DBMS_OUTPUT.PUT_LINE('*** Job percent done = ' ||
TO_CHAR(js.percent_done));
percent_done := js.percent_done;
END IF;
-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.
IF (BITAND(sts.mask,dbms_datapump.ku$_status_wip) != 0)
THEN
le := sts.wip;
ELSE
IF (BITAND(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
THEN
le := sts.error;
ELSE
le := NULL;
END IF;
END IF;
IF le IS NOT NULL
THEN
ind := le.FIRST;
WHILE ind IS NOT NULL LOOP
DBMS_OUTPUT.PUT_LINE(le(ind).LogText);
ind := le.NEXT(ind);
END LOOP;
END IF;
END LOOP;
-- Indicate that the job finished and detach from it.
DBMS_OUTPUT.PUT_LINE('Job has completed');
DBMS_OUTPUT.PUT_LINE('Final job state = ' || job_state);
dbms_datapump.detach(h1);
END;
/

Use metadata_remap proc with REMAP_SCHEMA option:
DBMS_DATAPUMP.METADATA_RAMAP(id, 'REMAP_SCHEMA', 'SOURCE_SCHEMA', 'DESTINATION_SCHEMA');

Problem in Importing in configuration.

Hi All,
I am facing a problem while importing the configuration object saying that "UNABLE TO CONNECT TO SLD".
Can you please let me know if i need to check anything , or anyway out.
thanks,
JAY

Thanks a lot for all your valuable suggestion.#
I have checked the SLDCHECK it is perfectly all right as expected with most of the things in gree and there is no red mark showing in from the perticular transaction, so also the SLD part is also opening perfectly as expected.
what next ... i am not findng any clue to progress.
thanks,#
JD

Problem in importing from dmp file

Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul Chougule

I tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do .

Problems in Importing Workbook

Similar Messages

Maybe you are looking for