Problems linking to DLLs

I am using DLL's that were written in C# to do database calls in my program. For some reason, I am having a real problem where the link to the DLL constructor keeps disappearing. I have to manually go back and re-link all of my constructor nodes and method calls. The DLL's are all kept in the same directory as the labview code. This occurs when using both the developement code and the compiled executable. We have double-checked all the DLL versions and verified that they are correct. After re-linking each of the DLL's the code works for a while, then it loses it's link again and has to be manually re-linked to work. It is not causing the program to crash, the writes to the database error-out and the program ceases to operate as expected. The problem is quite annoying, but worst of all, we can't figure out how to resolve the issue since we are not sure what is causing it. Numerous times we have gone to "tools/advanced/.NET Assembly reference" and removed everything and then re-added all the required DLLs back in. This does not fix the problem of the disappearing link to the Constructor. If anyone has ideas or has experienced this strange problem, please respond as we are at our wits end on this one...
Thanks

Have you registered your DLL? Sometimes these problems are caused by having a DLL unregistered or moving one that is registered.
Another possible problem is multiple DLLs with the same name, but I don't think that is your problem.
Hope that this helps
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Similar Messages

Problems linking Intel MKL in LabWindows

I would like to use the Intel Math Kernel Libraries (MKL) in LabWindows. However, I keep getting a linker error (undefined symbol when I try to call an MKL function). The functions I want are the FFT libraries (DFTI). I included the "mkl.h" and "mkl_dfti.h" files, and added them to my project as well. I also tried adding the /Qmkl compiler flag when compiling using the Intel compiler. This has become really frustrating, I don't know what's not added / included / not being linked.
Has anyone use the MKL successfully in LabWindows?? What libraries did you add? Thanks!
Solved!
Go to Solution.

Wow - sorry about the lack of formatting in the previous post. Here it is again:
I am working on a 64-bit installation of Win7, but I am making a 32-bit project. I am using LabWindows as an integrated development environment and project builder. I have tried using both its native compiler and the Intel C compiler. In both configuration the linker is LabWindows.
I am so far still only trying to use one function from the MKL, to test whether I have everything included and linked properly:
DftiCreateDescriptor()
I am including the following two header files:
#include mkl.h
#include mkl_dfti.h
I added the following to my include paths:
c:\Program Files (x86)\Intel\Compiler\11.1\054\
mkl\ia32\lib
c:\Program Files (x86)\Intel\Compiler\11.1\054\mkl\ia32\bin
c:\Program Files (x86)\Intel\Compiler\11.1\054\mkl\include
I added six .lib's to my project:
mkl_cdft_core.lib
mkl_cdft_core_dll.lib
mkl_core.lib
mkl_core_dll.lib
mkl_intel_c.lib
mkl_intel_c_dll.lib
I have tried compiling with both LabWindows, and with the Intel C Compiler through the LabWindows external compiler support. I have tried it with the following flags to the Intel C compiler:
/Qmkl
/Qopenmp -I%MKLROOT%/include
I get the following errors now:
FFT Test.prj(Release) - 4 link errors
Undefined symbol '_mkl_dft_commit_descriptor_d_c2c_1d_omp' referenced in "mkl_intel_c.lib".
Undefined symbol '_mkl_dft_commit_descriptor_d_r2c_1d_omp' referenced in "mkl_intel_c.lib".
Undefined symbol '___kmpc_begin' referenced in "FFT Test.c".
Undefined symbol '___kmpc_end' referenced in "FFT Test.c".
An Intel MKL support person appears to have responded to my NI forums question, but they haven't been particularly useful yet. The thread is open at:
http://forums.ni.com/t5/LabWindows-CVI/Problems-linking-Intel-MKL-in-LabWindows/td-p/2210642
I have a few questions. First, are these .lib files static libraries, or lists of exported functions for the .dll's? I think half of them, the ones that don't have "_dll" in their name, may be static libraries and therefore can have unresolved external dependencies (giving the first two linker errors). Second, how do I add .dll's to a LabWindows project? I have their directory in my include path (that's the \bin directory or the second include path I listed above). Is this enough? Finally, the Intel MKL responder in the forums.ni thread suggests adding a few .lib files to the linker, but I can't figure out how to do this in LabWindows.

SQORA32 driver could not be loaded. System error 1114: A dynamic link library (DLL) initialization routine failed

I have an MS Access 2013 application that opens a connection to an Oracle database via an Oracle client.
On occasion the application returns the following error when the ODBC connection is opened:
Specified driver could not be loaded due to system error
1114: A dynamic link library (DLL) initialization routine failed. (Oracle in OraClient11g_home1, C:\oracle\product\11.2.0\client_1\SQORA32.DLL).
This is an intermittent problem that is reproducible on several workstations (all running Windows 7 x64 with 32-bit version of Office 2013 and 32-bit Oracle client 11.2.0).
Many times the ODBC connection is established without a problem
Other times the connection can be established by closing then re-opening the application once
Other times closing the re-opening the application several times does not help
The same application is being run on several workstations and not every user experience the problem at the same time. The problem may be chronic for one user whereas another user experiences no problem whatsoever.
All of the posts I have seen concerning this issue are for a persistent problem opening a connection and not an intermittent one. I am at a loss of how to diagnose this problem and would appreciate some direction.

Hi Ross,
This error message is Microsoft Data Link Error, this error occurs on windows when attempting to start a service or load a system driver but the DLL you loaded or one of its dependencies returned FALSE. It typically point to a system DLL file which is located
in system32 and can be fixed by using the System File Checker tool. In your case, I suspect that it occurs due to a calling failure connecting to ODBC driver and it pointed to an error link C:\oracle\product\11.2.0\client_1\SQORA32.DLL which is hosted by oracle.
If they are analogous, a “repair” seems to be helpful, However since we are not expert about oracle program I‘d suggest you check if C:\app\Oracle\BIN\SQORA32.DLL file exists on your machine and contact with Oracle first, I think there you can get more effective
suggestion by other experts who familiar with design of Oracle database. Your understanding is highly appreciated.
By the way, I searched for you and seems like you are not alone about this issue.
https://community.oracle.com/thread/2301119
https://communities.sas.com/message/118002
http://forums.networkautomation.com/forum/messageview.cfm?catid=50&threadid=11611
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Report problem link opens up word (pc)

When I click on report problem link in purchase history for an app, all it brings up word. Don't have email receipt yet and itunes support is useless. it's like trying to find a needle in a haystack.

Click the "contact support" link toward the lower-left of that page and follow the instructions.
Regards.

The procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll . I got this error after downloading and installing Frame MAker 12. My system os is service pack 2.

The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
this is the error.
my os is windows service pack 2
2 gb ram

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

Itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Problem in creating DLL for a LabVIEW VI

Hi
I am facing problems in creating DLL for a LabVIEW VI. Previously i had no problems in creating DLL for the VI that transmits a message from serial port to NI - PXI 7831-R Reconfigurable I/O card (configured by FPGA MOdule). When i try the same VI with a customized port developed using IVI drivers i am not able to create the DLL. It gives me error as follows:
Fatal Internal error: "datamgr.cpp", Line No: 1882
Please somebody help me out to fix this error.
Regards,
Subramania Bharathi

Hi,
Thanks for your curiosity in replying my questions. I am really sorry for replying so late. Actually the problem was with the NI SWITCH 2503 functions. Actually i was multiplexing the channels of my customized serial port using NI Switch module. This switching is done before i start my communication. My VI follows a sequence as follows.
1. Connect two channelss using Switch functions
2. configuration of both FPGA and the customized port
3. Transmit data from the port
4. Receive it in FPGA.
5. Reset the channels using Switch functions
I never expected that the error was because of NI Switch. When i removed them from my VI i was able to create the DLL and able to create sequence successfully to run in the Testsand. And
further i am using Switch Executive for swithcing the channels in TestStand.
But now i am very curious why it posted me that error when i used my NI Switch function?? I tried to create DLL for a VI that switches two channels and i was successful. But the error occurs only when i combine i with my FPGA functions!! If you could trace out the reason, please let me know
Once again thanks a lot for your support
Regards,
Subramania Bharathi

Problems registering craxdrt.dll

Hi Everybody,
I am trying to get an application that makes use of Crystal Reports to build but have run into problems due to dlls not being registered on my build machine. The error message I get is:
"The type or namespace name 'CRAXDRT' could not be found (are you missing a using directive or an assembly reference?)".
This is due to a reference we have to craxdrt.dll (which is not registered on the build machine) in our application. The problem is that when I try to register the craxdrt.dll file with regsvr32 I get the following error:
"The module "craxdrt.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found."
I've had a look at craxdrt.dll with dependency walker, which lists the following dlls as missing:
API-MS-WIN-APPMODEL-RUNTIME-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ERROR-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-STRING-L1-1-0.DLL
API-MS-WIN-SHCORE-SCALING-L1-1-1.DLL
CSLIBU-2-1.DLL
DCOMP.DLL
GPSVC.DLL
IESHIMS.DLL
MFC71U.DLL
I'm not sure if these are a red herring though as they appear to be Windows system DLLs for the most part, which I would not expect to have to redistribute with my application.
Any help would be greatly appreciated as its starting to feel like banging my head against a brick wall trying to get this to work and getting nowhere.
Thanks a lot for any help you are able to give!

Hi Max,
Moved your post to the Legacy SDK forum.
Need more info, what version of CR are you using?
And since the RDC is only supported in Visual Studio 6 I assume this is what you are using?
Current version of the RDC packages up to CR XI R2 ( version 11.5 ) have redist packages available so don't try to deploy the runtime manually yourself, use the MSM or MSI.
MSI should have all of the dependencies include, MSM will be missing ALL of the dependencies so you need to include them yourself.
Don

Cant download PDFs and 'report problem link wont send anything

All links to PDFs on sites supposedly do a download, but then do not display anything. When I tried to use the Report a Problem link I filled in all the details and then pressed submit but it did nothing - could only go back

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox).
Or you could see if the second half of Kappy's reply in this thread helps : https://discussions.apple.com/message/20357006#20357006

Linking oraocci11.dll - OCCI works only with Microsoft VC++???

I wonder if OCCI will work with other IDEs too?
I tried to use it with MingW Toolchain (g++). But I could link the dll to my application yet. When compiling I get always:
g++ -IC:\oracle\11.1.0\oci\include -IC:\oracle\11.1.0\oci\lib -O0 -g3 -c -fmessage-length=0 -oOcciTest.o ..\OcciTest.cpp
g++ -LC:\oracle\11.1.0\BIN -LC:\oracle\11.1.0\oci\lib\msvc -oOracleTest.exe OcciTest.o -loraocci11
OcciTest.o: In function `main':
N:/workspace/c/OracleTest/Debug/../OcciTest.cpp:27: undefined reference to `oracle::occi::Environment::createEnvironment(oracle::occi::Environment::Mode, void*, void* (*)(void*, unsigned int), void* (*)(void*, void*, unsigned int), void (*)(void*, void*))'
collect2: ld returned 1 exit status
Build error occurred, build is stopped
How to link the dll (oraocci11.dll?) correctly?
Client: 11.0.6
DB: 9i
OS: WinXP
IDE: Eclispe CDT
Comp: G++
Edited by: [email protected] on Mar 12, 2009 9:33 AM

Hi,
You need the correct version (lib and dll) for your specific compiler.
Look here:
Link:[Using OCCI with Microsoft Visual C++(11gR1)|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28390/install.htm#CBHGBBJI]
Or here, to download other versions for VC++9(2008)
Link:[Oracle C++ Call Interface - Downloads|http://www.oracle.com/technology/tech/oci/occi/occidownloads.html]
hth
P

The procedure entry point ?NS_SetHasLoadedNewDDLLs@@YAXXZ could not be located in the dynamic link libraryxul.dll.

After years of trouble free use, my Firefox won't open. This message is displayed if any firefox entry point is tried;'The procedure entry point ?NS_SetHasLoadedNewDDLLs@@YAXXZ could not be located in the dynamic link libraryxul.dll.'
It is imperative to retain my bookmarks, therefore I can not uninstall/reinstall.
Can you help?
Thanks,
Trish

Charley33 wrote:
I keep getting this error message when logging in on my laptop

XML fetch failed -- possibly a problem with AvXml.dll or its permissions

When attempting to access the Status Monitor I receive the following error message:
XML fetch failed -- possibly a problem with AvXml.dll or its permissions.
Check that the "AvXml" virtual directory settings in IIS have proper permissions and allow execute access.
I've tried all combos of security on the IIS directory. What am I missing?

Hi Lindborg
I have that problem with version 4.0 (X), it is due?, As I fix?.
Unity I have a failover cluster, I have several problems, sometimes not let me delete mailbox, I can retrieve messages.
thanks for any help you can provide.
Regard

Link a DLL with Step.Module

I am trying to create a sequence file from a C# 2005 code using TestStand 4.0
The flow of control is (without going into the coding details) :
- create a step
- create a sequence
- add step to the sequence
- add sequence to a sequenceFile
- save the sequenceFile
now, the porblem is that through this flow, a sequence file is created but i am unable to Link the DLL with the Step.Module . The adapter name is "AdapterKeyNames.FlexCAdapterKeyName" and step name is "StepTypes.StepType_NumericMeasurement".
The manual reffers to the "CommonCModule.ModulePath" but i am unable to
access CommonCModule ! The sequence file generated has no DLL and the
expression is the default one:
"Numeric Limit Test, 9 <= x <= 11"
I need to:
- link a DLL with the module.
- Select a function from the DLL
- Pass paramaeter to the mathod and get result ( some default values )
- Set the expression
- Set the low and high limit

This link should at least answer some part of your question.
hope this helps,
Norbert B.
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

UnsatisfiedLinkError: A dynamic link library (DLL) initialization routine

I get this error only when building a native library with /MD on Win64.
Envrionment
Windows Server 2008 R2 (64 bit)
JDK1.6 (32 bit)
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode)
MS Visual Studio 2008
Microsoft (R) 32-bit C/C+ Optimizing Compiler Version 15.00.30729.01 for 80x86+
If I compile with "cl /O1 /EHsc /LD /IC:\Apps\Dvlp\jdk1.6.0\include /IC:\Apps\Dvlp\jdk1.6.0\include\win32 ..." then System.loadLibrary(...) succeeds.
If I compile with "cl */MD* /O1 /EHsc /LD /IC:\Apps\Dvlp\jdk1.6.0\include /IC:\Apps\Dvlp\jdk1.6.0\include\win32 ..." then System.loadLibrary(...) fails with "A dynamic link library (DLL) initialization routine failed."
After reading Microsoft's description of the /MD linker option I'm assuming this is a bitness issue but with my limited experience on Windows I'm afraid I'm stuck. Note, I must build with /MD, it's a requirement. Any suggestions on what to do next?
Edited by: user709182 on Nov 16, 2011 2:55 PM

MichaelT wrote:
By the way, building with /MD is requirement imposed by 3rd party libraries I depend upon so removing it is not an option.An alternative still exists. Do not use JNI. Instead
1. Wrap the target native code in an executable.
2. Add a communication api.
3. Test and debug as the executable.
4. Run the executable via Runtime.exec/ProcessBuilder
5. Execute the functionality via the communication api.
No JNI in the above. Also no possibility that the native code can crash your VM. Even if the exe crashes you can add restart code to deal with it.

Problems linking libraries to device

Hi, I am having a problem linking to a library, but only when I am building for the device. When I build for the device it has problems saying a number of functions that I use, their symbols could not be found. Building for the simulator it works just fine. For fun I removed the library from Xcode and tried to build with the simulator. The simulator then gave me the same error messages. Why can it find the symbols from the library for the Simulator, but not for the Device? I have tried explicitly adding the -dylibMYLIB.dylib to the other linking flags, but this did not work.
Thanks,
David

I have found out that the reason is in my library. The simulator runs on i386 while the actual device will run on armv6. Also the iPhone library needs to be static. See this link for a very good explanation of it all. http://latenitesoft.blogspot.com/2008/10/iphone-programming-tips-building-unix.h tml
Unfortunately my library fails to compile using these tips, does anybody know of a way to take an existing i386 library and recompile it for armv6? That way I could take the existing library I got from MacPorts and make it work for the iPhone.
Hope the link helps a little.
-David

Problems linking to DLLs

Similar Messages

Maybe you are looking for