Problems Login to the CMC as administrator

Hi
Everyday first attempt to login to CMC fails with following error. However immediate attempt works fine. Then rest of the day I can login without any problems. Next day same story! Can someone tell me why this happens and how to resolve this.
"Unable to connect to cluster @<Server Name>.COM to retrieve updated CMS member list. Logon cannot continue. "
Thanks

Hi David
thanks for the prompt reply.
Is there any problem if I get my administrator to not restart this server/service every night (if that is possible)?
You mentioned I need to use real CMS name, can you elaborate?
This is our new installation and we are still learning.
Its interesting you provided solution for both CMC and Infoview, however I just noticed that for Infoview I don't have any problem logging in first time.
Why would that be?
Thanks

Similar Messages

Problem to record the log of Administration v 4.1

I have installed correctly the acs version 4.1, the authenticates, but I am not this recording the events of administration... i can do

Hi Carlos,
Please have a look at the link below:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/LgsRpts.html#wp618071
Hope this helps.
Regards,
Anisha.
- Do rate helpful posts.

I was unable to login in the CMC The error states

Account information not recognized: Could not reach CMS 'WIN-V8R8YXLSTKO:6400'. The CMS on machine 'WIN-V8R8YXLSTKO' was stopped due to a critical error. (FWM 20031)

Please provide more information such as since when has the issue been observed.
The below information would help a lot for everyone:
1. ServerOS version:
2. CMS Db version:
3. CMS drivers version:
4. BO version:
5. Is this a new installation? If not, what are the changes done at OS / CMS Db level.
The CMS is in stopped state, so first check whether we have any issues with the ports / firewalls / antivirus which might stop this to start up. Telnet to the port would help.
Look into the event viewer logs in windows which might provide some insights. In unix servers look into the syslog file (etc/var/logs)

Problem to create the Account

Hi,
I have the problem to create the Account in Administration --> Admin Applets --> User Admin. As per documentation I need to add UserAccounts=true in General Configuration link in the options for <Server Name> pane. But after doing the configuration under Admin Server and restarting the server, I could not get the Predefined Accounts... option available under Security link of User Admin applet page. So I could not add the new Account.
Please let me know, how I can configure the same and add the new Account.
Thanks.

Hi
The configuration that you need to add is UseAccounts=true and not UserAccounts=true. Change it in the config.cfg file , restart the content server and then create accounts.
Thanks
Srinath

How to show the "SIA name" in the CMC screen(s) for administration ( BI 4.1 SP5)

When logging on to "BI4" (cmc) we have several options.
First option: the web page for the login.
Our system has 3 SIA's ( DEV , TEST , PROD ), three Tomcat "web app servers" with respective urls
DEV is a simple one: everything on one machine.
(exceptions: databases in Oracle, IFRS / OFRS are NAS mapped to D:/something on the BI4-DEV server)
TEST is separated:
tomcat on an application server (url:bi4-web-test) ,
one "management server" BI4-MAN-TEST for SIA,
a "processing server" BI4-PRO-TEST for the processing services.
PROD is much like test, only more processing servers on extra machines
BUT
logging on to CMC, at either one of these 3 URLs : http:/<siaservername>/BOE/CMC/ ,
I still have the option: "Server:" ( BI4-DEV , BI4MAN-TEST, BI4MAN-PROD : three different "manager" or SIA names)
So starting from BI4-DEV, I can log on to BI4-PROD
My problem: the URL shown in the browser navbar now does NOT tell me any more at which server I am working. The url only shows where I logged in.
Is it possible to SHOW the ACTUAL SERVER somewhere - say next to the logged-in user name ?
Instead having a page header showing:
... <preferences> ... Welcome, Administrator
I imagine it showing:
... <preferences> ... Welcome, Administrator ON <SIA>
Is this at all possible ?
In Boxi 3.1 we could modify the "header layout" for InfoView. Users would see our company logo, their login name ... but we never did that for boxi 3.1 "CMC"
Now in BI4.1 , with the much more complicated setup, we want to do that.
I did not find it in the "Administrators' Guide" .... yet.
Hans Rens,
Brussels

( long reply)
Thank you for this First step.
Though reading through your reply, I understand that my question was not clear.
On the (Launchpad) LOGIN page, I see the company name. That page thus was “customized”
On the CMC login page, we didn’t customize it. We judged that “Administrators know what they are doing”
and that “ICT personnel can live with reading the SAP logo instead of company logo/name/colours”
BUT
Once logged in to the CMC, every “internal page” (the menu, the Universes page, the Applications page, the Users and Groups – page … ) have a uniform header saying :
Welcome: HANREN | Preferences | | Log Off
(yes, HANREN is the name of the BI User logged on)
I would like to make it something like :
Welcome: HANREN | BI4MAN-PROD | Preferences | | Log Off
Where the red name is “the name of the SIA, a.k.a. “manager server” for the (prod) cluster. (or test cluster – and when nothing is showing, we will know “this is DEV” because we “did not customize that one” )
WHY ?
At login, everybody KNOWS where he is logging in to, because you need to supply the SERVER NAME
But further on, working in two (or more) browser windows / tabs, one needs a way to find “where I am”.
This goes fine, when logging in to DEV on the DEV URL, then opening a second window and logging in to the TEST URL and on the test sia.
But SWITCHING from one window to another tab … a small indicator would be very helpful.
Lucky escape ?
We did have a problem recently, were two admins were loggin on / off to the different systems, looking for differences to correct something … but nobody wanted to “correct” a system that was working well.
It was quite frustrating to find out that it was “very easy” to think I was working on system1 (in the url) while actually connected to the system3(sia)
OK, we saw that in time, before the problem from system3 had been “implemented” on system1, instead of applying the solution (settings of working system1) to the faulty system3.
But the stress of the error found, the search for solutions “asap” … has to be counted in. If there is a simple way to “know” where one is working, instead of having to “guess” , human mistakes can be brought to a minimum.
This morning I tested again: it is perfectly possible, to open 3 browser windows on exactlu the same URL, then open 3 DIFFERENT CMS logins : one on prod, another on test, a third one with my colleagues login also on test … and the navigation bar will NOT show who is adding user groups in which system.
Thank you for the first step hint, though. I’ll add it to our documentation.
It is a little different in BI 4.x than in our boxi-3.x setup )

Don't see Windows NT option in authentication tab on the CMC login page

I installed BusinessObjects Enterprise XI 3.1 and installation was successful. We are using Widows NT athentication. I mapped the Window NT Users. Window NT Users group was populated under u2018users and groupu2019. Everything looks fine.The problem is that I am not able to see Windows NT option in authentication tab on the CMC login page. (I can see only Enterprise, LDAP and Windows AD). I can see Windows NT option in authentication tab on the infoview login page without problem.
I tried to reconfig the web.xml file ( I replaced 'secEnterprise' with 'secWindowsNT' but it still doesnu2019t work).
web.xml in E:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\warfiles\WebApps\CmcApp\WEB-INF is as followed now

 
 <context-param>
 <param-name>authentication.default</param-name>
 <param-value>secWindowsNT</param-value>
 </context-param>
 
 
 <context-param>
 <param-name>authentication.visible</param-name>
 <param-value>true</param-value>
Any idea? Thanks

Sherri, on page 457 of the admin guide it says:
"The CMC and other Java-based applications do not support NT
authentication."
I think it's because only windows based app supports windows NT authentication but not java based ones.
I thinkt he CMC is a java based application.

After update Firefox keeps returning a "Gone The requested resource /administrator/index.php is no longer available" reponse when trying to access joomla login

After automatic update to 32.2 (then I tried to update to 33.0 beta with no improvement) Firefox keeps returning a "Gone The requested resource /administrator/index.php is no longer available" reponse when trying to access joomla login. The problem is there even when I fill manually the fileds "user" and "password" in the joomla admin login page. The problem appears in different sites on different servers, and do not occurr using Google Chrome. It's clearly a Firefox issue. Could you please give me some ideas on how to solve ?

Works here.
*http://www.centrostellapolare.it/administrator/index.php
Try to disable IPv6 (check for other possible causes as well).
*http://kb.mozillazine.org/Error_loading_websites

Sharepoint ONLINE - Unable to render the data. If the problem persists, contact your web server administrator

Hi,
I have followed the steps in the following link:
Make an External List from a SQL Azure table with Business Connectivity Services and Secure Store, but I keep receiving the following message when I try to access an external list:
"Unable to render the data. If the problem persists, contact your web server administrator"
Note: I'm using SharePoint 2013 ONLINE, and (as far as I know) I have no access to the logs & powershell.
Any body has had the same issue before?
Regards.
Note: I have tried changing my ECT's connection property (through designer 2013) to BDC Identity, but I keep receiving the following error message:
The metadata object that has Name "xxxx" has a Property with name "AuthenticationMode" and value "RevertToSelf". This value indicates that the runtime should revert to the identity of the application pool, but reverting to the
application pool is not permitted for partitioned service applications.
Saeed Fattahi .NET Specialist

Try changing the External Content’s connection
properties’ Authentication Mode to BDC identity. You will most like get an error (which I have shown below)
Below is an error you will received. Read through
the error carefully.
Launch the SharePoint 2013 Management Shell
and run the below commands
$bcsServiceApp = Get-SPServiceApplication
| where {$_ -match "Business Data Connectivity Service"}
$bcsServiceApp.RevertToSelfAllowed
= $true;
$bcsServiceApp.Update();
This Solved the problem for me. you can try
Sharepoint | TechCenter franklin

I have a problem. When I start to sync music to my iPod touch, you have to enter the password of your account. I downloaded the game from the general account, and do not always know the password. He writes that if I do not login, then the game will be era

I have a problem. When I start to sync music to my iPod touch, you have to enter the password of your account. I downloaded the game from the general account, and do not always know the password. He writes that if I do not login, then the game will be erased. Previously, this was not. When starting to sync music, it did not touch my programs, and now because of this music can not be transferred to iPods. PANIC AT ME! HELP

If they are Tunes purchased music you have to sing into the account that purchased them.
Is this the iTunes library/computer you sync with? You can rally only "sync" with one iTunes library/computer.However, yo can manually manage music and videos among different libraries/computer. See the manual method of:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

2013 SP1 problem - the microsoft exchange administrator has made a change that requires you quit and restart outlook

I've looked at other answers to this problem but they seem to relate to multi server environments or new migrations - neither apply here. The Exchange 2013 server was implemented last year as a migration from Exchange 2007. It has been running well since.
I upgraded to SP1 on Sunday night and since then all users, regardless of Outlook version, are continually being asked to "the microsoft exchange administrator has made a change that requires you quit and restart outlook". Clicking OK loads Outlook
normally (no restart). I can delete the Outlook profile and set up a new profile OK but the issue comes back again. Deleting the users roaming or local profile does not help either.
The CAS seems to be set correctly - when I run Get-MailboxDatabase | fl RpcClientAccessserver it returns the correct server.
There are no public folders set up.

Thanks for the update. It was the PF that caused the issue.
When I removed the old Exchange 2010 server it did not remove everything for AD. Had to manually remove the older sever.

SP online 365 - Unable to render the data. If the problem persists, contact your web server administrator.

Help needed urgently, i'm pulling my hair out on this one!
Using SharePoint online (365) I am trying to create an external list to a SQL table. I go through the steps in SP designer and finally create the external list but when I go to the list I get the error:
Unable to render the data. If the problem persists, contact your web server administrator.
I have read all of the posts on here to fix this and they are mainly for on premise; the powershell doesn't work with spOnline and I have added permissions into the BCS service application but nothing works. I read that it is not possible to connect
sharepoint online to an on-premise SQL database so I moved the SQL database to an azure SQL service server but I still get the same error.
I have a "test" on premise sharepoint which I have tried this on and it works fine so it must be an issue with SPonline! does anyone know how to get BCS connections to external data working in sharepoint online as external lists?

Hi,
In SharePoint online, we support:
Business Data Connectivity (BDC)
Data Source types, including Windows Communication Foundation (WCF)
SQL Server Azure connectors
I'd suggest you refer to the article below:
https://support.office.com/en-us/article/Make-an-External-List-from-a-SQL-Azure-table-with-Business-Connectivity-Services-and-Secure-Store-466f3809-fde7-41f2-87f7-77d9fdadfc95?ui=en-US&rs=en-US&ad=US
It describes about how to use SharePoint technologies to access data from a SQL Azure database without having to write code, including create an External List by using Business Connectivity Services (BCS) and Secure Store. BCS connects SharePoint solutions
to external data, and Secure Store enables user authentication for the data. By using an External List, you can display the contents of a table from SQL Azure in SharePoint Online. Users can read, edit, and update the data, all in SharePoint Online.
Regards,
Rebecca Tu
TechNet Community Support

Problem Starting the Web-Based Administrative Console

I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
The problem is that when trying to connect to the Web-Based Administrative Console.
I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
�Your Sun One Application Server License does not allow Remote Administration.
Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Problem in getting the application login page

Hi Firends,
I am facing problem in getting the application login page.
http://localhost:7777/pls/apex/f?p=102:1
when i am clicking this link it is not directing me to the login page for this application.please let me know what could be the reason behind this.
Thanks in advance

Hi Martin, many thanks for replying. Let me know how this could effect in not getting the login page. I have checked in my application,it is by default "No application authorization required " and other option is " must not be a public user " . Should i change it to " must not be a public user from no application authorization required"
please put more light on it. Y i am saying this because it was working fine day b4r yesterday but today i am getting problem in finding the login page of my application aftr providing the url. i am following the SSO authentication scheme and under Home>Application Builder>Application 102>Shared Components>Edit Security Attributes , i have given f?p=&APP_ID.:1:&SESSION. as home link and under Home>Application Builder>Application 100>Page 101>Edit Page Process, this code i have provided
wwv_flow_custom_auth_std.login(
P_UNAME => v('P101_USERNAME'),
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':1'
as a source code.
i am really stucked into it, and i need to finish is ASAP. Please provide all possible reasons for this problem.

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

Can't login to the Collaborate C-Hub Administration Console

What's the user name and password for the Collaborate C-Hub Administrator console?
I successfully intstalled the RosettaNet version of Collaborate with the Coludscape
database on an NT. The verification also succeded. But after starting the server
with C-Hub configuration (from the start-menu) I can't login! What is the correct
login and password when I havn't changed anything?
I can't start the WebLogic Server console with the C-Hub server configuration.
There is nothing at that URL (http://localhost:7001/console).
I can start the WebLogic server console with the ordinary default server and login
as the "system" user. But then I don't have any configuration for the C-Hub!
Have I missed something here, or is the Colloaborate installation description
truncated?
It seems to me that I have to install the C-Hub administration console as a web
application in the server I can login to with the Administrator console. If so,
why doesn't the installation guide tells me that?
(By the way, the URL's the installation created in the start-meny contains an
invalid hostname. It should be "localhost" or my machine name. For some reason,
my company name was used instead.)

Thanks for the login, I will try it!
I got the C-Hub and C-Enabler running, but not the administrators console (in
those servers). There is sufficient configuration information in this document
at the BEA site:
http://edocs.bea.com/wlcollab/v1_0_1/interm/setup.htm
The login: bea, and password: 12345678 given there worked.
I havn't yet been able to use the administrators console to configure the servers
in the Collaborate hub and enabler directories. (To do that I belive the adminitration
console must first be added as an application in those servers.)
I got the C-Hub and C-enabler working by directly editing the configuration in
hub/config/mydomain/config.xml resp. enabler/config/mydomain/config.xml and running
the two servers separatly.
"Jeff Ogorek" <[email protected]> wrote:
>
UserId: admin
Password: myadmin
I'd be curious to get an answer to your question regarding how to administor
the
Weblogic Server that the Hub is running on. Let me know if what you
find out.
"Lars Nyström" <[email protected]> wrote:
What's the user name and password for the Collaborate C-Hub Administrator
console?
I successfully intstalled the RosettaNet version of Collaborate withthe
Coludscape
database on an NT. The verification also succeded. But after startingthe
server
with C-Hub configuration (from the start-menu) I can't login! What isthe
correct
login and password when I havn't changed anything?
I can't start the WebLogic Server console with the C-Hub server configuration.
There is nothing at that URL (http://localhost:7001/console).
I can start the WebLogic server console with the ordinary default server
and login
as the "system" user. But then I don't have any configuration for theC-Hub!
Have I missed something here, or is the Colloaborate installation description
truncated?
It seems to me that I have to install the C-Hub administration consoleas
a web
application in the server I can login to with the Administrator console.
If so,
why doesn't the installation guide tells me that?
(By the way, the URL's the installation created in the start-meny contains
an
invalid hostname. It should be "localhost" or my machine name. For some
reason,
my company name was used instead.)

Problems Login to the CMC as administrator

Similar Messages

Maybe you are looking for