Problems printing photographs via Aperture, using Canon MP640

When printing photographs via Aperture, using my CanonMP640, I am instructed to turn off my color management, but I don’t know how to do this & Canon can’t help me. The color quality is very poor (whites have a blue tinge and reds come out orange)
Can anyone help or suggest a good quality printer that is compatible with Aperture, and allows me to turn off Color management on the printer.

I have an Epson R320 and all the Epson's printer driver options are available to me in Aperture. My list is slightly different: Print Settings, Color Management, Page Layout Settings, and Extension Settings with the words separated by spaces and each has a capitalized first letter.
I'm wondering if Aperture isn't seeing your Epson driver files. You might want to remove the Aperture plist file from your User>Library>Preferences folder and relaunch Aperture.

Similar Messages

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

Problems printing wirelessly via airport express using pc

Hey all, tried to reply to a post that had evaluated this issue but for some reason would not let me. I have an airport express hooked up to a brother 5140. My Mac prints fine. My Windows XP box however does not. I have setup bonjour for Windows and it recognizes the brother 5140 and installed all good. However when I try to print it errors out. Any help is appreciated.

using a linksys wrt610n by the way think a setting with my router may be the issue but not sure.

Problems printing JPG via hpeprint

I just recently bought the HP OfficeJet Pro 8600 and have tried to have JPGs print out of it via email directly to the printer and they print out the image cut off on both left and right sides of the page, with no bleed on the left side of the page. Is there a setting that I need to adjust to ensure that this doesn't happen anymore in future emails that have JPG images? Please advice. Also, how do I adjust the setting on my printer to minimize the ink used in my printings? I can't find it in the printer preferences on the touch screen or on my laptop in the printer settings. Thanks for your time!

Hello ulisan98.
Images sent to ePrint will always try to be printed on 10x15 (4x6) photo media. If there's no such media loaded in the printer, then they will print this size on normal media. Is this what you get?
Further help on ePrint can be found on https://h30495.www3.hp.com/help#eprint.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Problems printing from Photoshop 4 to Canon Pro9000MarkII

Hi All,
This has only strting happening in the last two days - before that I have had no problems with this function. I am trying to print from Photoshop 4 on a PC to my Canon Pro9000MarkII.
When I print a document and tick the Scale to Fit Media box then everything is fine and it prints no problem.
When I try to print with this box unticked so that I can print at 100% scale I press OK and nothing happens.
We have tried to download the latest printer driver and this has not helped. I have played around with the Printer Preferences and this too has not helped. I have restarted Photoshop and the PC quite a few times - nothing!!
I have obviously missed some sort of setting but I don't know what - help!!!!

I am back and still having trouble with Lightroom. Someone suggested I downgrade to LR 4.1 (from 4.4) but that didn't help. To reiterate: I have a MacBook Pro, using 10.9.5. I got a new Epson Stylus Photo R2000 printer and LR is having trouble communicating with the printer. When I try to print a letter size (or other size) picture, a 5x7 partial tile of the picture prints off center bleeding to the top. The only way I can print a whole picture is the size it 5x7; then it prints the whole picture but it is still off center, not as it appears in LR print view. I have talked with Epson who said I had Mac conflicts; I spoke with Mac who got rid of the conflicts so it can print fine from Apple programs like Pages, or the internet. It is only LR that won't print right. Obviously I got a photo printer to print photos so I would like help resolving this. It has been very frustrating that although I could talk with both Apple and Epson support, when I tried to contact Adobe both by phone and Live chat I was told that LR is not supported except on this forum. So please, help. Thanks.

Why am i getting poor quality photo prints after installing lion using canon pixma 6120?

After installing Lion, I began experiencing poor quality photo prints on my Canon Pixma 6120 printer. Prior to Lion, my picture prints were all high quality. Now, anything black in the picture is faded.

Lion should not cause the blacks to print faded. The printer drivers used by Snow Leopard and Leopard are the same version as that used by Lion.
For starters I suggest you check that you have the latest version installed. This Apple KB article shows the MG6100 series has v10.51.2.0 as the latest version.
I also recommend you do a Nozzle test print. This can be executed from the MG6120 control panel or via the Printer Utilties window (via Print & Scan, select the printer and then open Options & Supplies and then select the Utilties tab).
If the nozzle test print is okay but the blacks still look faded when printing photos (note the printer has two black ink tanks - one for photos and one for text) then try a reset of the printing system. This will remove the MG6120 from the Print & Scan pane but not the supporting drivers. So you will only have to add the printer again.

Problems printing wirelessly with A_Extreme and Canon pixma i4000

Have had a Airport Express network setup with 2 Macs and 2 PCs sharing the printer wirelessly without problem for 2 years. Replaced the AP with an Extreme base station and now the printer is no longer detectable, although everything else is working well ( x one of the PCs can't detect the USB drive. )
2.16 GHz Intel Duo Core, G5 Mac OS X (10.4.7) 1GB ram

Some people have found that the USB 2 port is too fast for some printers.
You can try placing a USB 1 hub in between the printer and the AEBSn.
Another option
I've had an Canon iP5000 printer linked up to my AirPort Express for remote printing. It has never worked reliably: on long complex jobs it would just stop printing in the middle of a page. Well, now some early testing of a possible fix has allowed me to print long, complex jobs without the printer stopping in the middle. I'm happy, and will test the solution more over the next few weeks. Although not yet thoroughly tested, I thought I'd share my solution now, given how well it seems to be working. I set up the firewall installed in Mac OS X to limit the bandwidth of the connection to the AirPort, so that print jobs go more slowly to the printer.
http://www.macosxhints.com/article.php?story=20070118020953464

Problems printing to HP printers using Bonjour and XP

Good afternoon all
I am unable to print from my ThinkPad X61 PC laptop running XP (Service Pack 3) to either of my HP printers (Laserjet 6MP and PhotoSmart C3180) connected to my Airport Extreme via a USB hub. They work fine from my MacBook running Snow Leopard, or when directly connected to my PC.
I am able to install both printers using Bonjour Printer Wizard (and recognize them through Airport Utility). I then print a document, it spools to the print queue, then generates an error saying the document failed to print. I have tried it without the hub with the same result.
I have reinstalled Bonjour and the printer drivers and followed the Printer Troubleshooting Guide procedure to no avail. I have also tried the TCP/IP port creation which did not work. Any help would be greatly appreciated.
Yours
Sam

Hi Pahu,
Thanks for you reply. Here's some additional information because I'm not quite sure how to resolve the network addressing as you described. The router is set up as a DHCP server, using the standard 192.168.1.1 IP address, and the subnet mask is 255.255.255.0 The starting IP address is 192.168.1.100, and I have it set to allow up to 50 connections. (No particular reason, I think that may have been the default.) The printer is set up to check a variety of connection protocols, starting with DHCP. If that fails, it moves to BOOTP, etc. When I print the network configuraton page from the printer, it tells me the IP address is 169.254.18.32, subnet mask 255.255.0.0, default gateway 169.254.18.32, and the IP is configured by AUTOIP.
In the past, when it has been working properly, the printer shows an IP address of 192.168.1.10X, usually .100 or .101, but it depends on which device I've powered up first. This is what I would expect, given that the printer should be communicating with the router and be assigned an IP address by DHCP. What I can't figure out is why the printer reverts to its internal default IP address 169.254.18.32, and why this is inaccessible even if I try to designate the printer as an IP printer and type in the printer's IP address.
Do I need to set the printer to refresh its DHCP lease more often to ensure it doesn't get cut off by the router? How do I make sure the printer stays on the same subnet as the computers if they're all on the same router? Should I assign the printer a static IP address like 192.168.1.100, then set the DHCP range to start at 192.168.1.101? Sorry to ask so many questions, I'm not a network expert and I didn't think this printer would be such a pain to configure.
Cheers,
R

Cannot print from MS Office using Canon MP600

I recently upgraded from a Powerbook to an iMac. The normal Apple migration tool worked wonders and everything was working fine.
Last week I was no longer able to print from MS Office. I try out demo's etc. so I'm wondering if something got broken. I've uninstalled as much as I can think of but still no luck. I tried uninstalling Office and the print drivers and then reinstalling everything over again - that didn't work.
Word gives the following error message:
Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings.
When I look in the console I see the following errors:
2007-02-17 11:37:18.941 Microsoft Word[309] CFLog (21): dyld returns 2 when trying to load /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter
2007-02-17 11:37:18.941 Microsoft Word[309] CFLog (22): Cannot find function pointer CVFrameworkFactory for factory 33F8D03A-C85F-11D3-8A31-0050E4702C48 in CFBundle/CFPlugIn 0x16885500 </System/Library/Printers/CVs/Converter.plugin> (bundle, not loaded)
2007-02-17 11:37:19.099 Microsoft Word[309] CFLog (21): dyld returns 2 when trying to load /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter
2007-02-17 11:37:19.100 Microsoft Word[309] CFLog (22): Cannot find function pointer CVFrameworkFactory for factory 33F8D03A-C85F-11D3-8A31-0050E4702C48 in CFBundle/CFPlugIn 0x16885500 </System/Library/Printers/CVs/Converter.plugin> (bundle, not loaded)
Anyone have any idea what I've messed up? Any thoughts on how to fix this would be appreciated.
Chris
iMac, 24", 2GB Mac OS X (10.4.8)

Looks like I solved this. Unfortunately I don't know why it started doing this.
I tried a number of things - uninstalling Office, reinstalling Office, uninstalling the print drivers, reinstalling the print drivers, removing all caches, etc., etc.
After doing some sniffing around on some other questions it seems like this is a problem with a number applications. The repeated solution mentioned reinstalling Mac OSX but to maintain and archive the user accounts on the computer. I did this based on the following link:
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
After doing that I reinstalled the print drivers, completed the install of Office 2004 and everything worked. Doing the reinstall removed all my Haxies. I'm starting to think it had to do with that. I'll likely apply them one at a time and see which one breaks it.
iMac, 24", 2GB Mac OS X (10.4.8)

Problem printing when spool print documents is selected as apposed to print direct

I have an officejet 6500 and I'm having a problem printing a label created using Label Factory Deluxe software. The job will not print if spool print documents so that printing finishes faster is selected under the printer properties. The job appears to be sent to the printer. The printer icon appears in the task tray for less than a second and the printer makes a trill sounding beep but nothing prints. In addition there is nothing in the print que. It will print however, if print directly to the printer is selected. Any ideas???

Hello,
Well with out any info on versions the easiest way is to check the Not Printer Option on in the Page Setup of the Report.
Don

Canon MP640 is not found via wireless using canonijnetwork tool

MacBook Pro late 2008. OS X (10.5.8)
BT home hub
Canon Pixma MP640 wireless printer.
Printer set up wifi connection to wireless BT homehub without any problems. Confiremed wirelss LAN settings via printer display.
Ran setup disk M1.1 successfully installing drivers. On Canon IJ Network Tool screen, an alert message appears stating "printer not detected".
I have tried adding it through system preferences > print & fax > clicking + tab. Two printers are displayed: Canon MP640 series ...Bonjour; Canon MP640 series canonijnetwork.
I added both printers, but they only appear as USB in the utilities tab. I changed it to network, then selected Canon MP640 series canonijnetwork (only option displayed). Try to print and the dialogue box appears for the printer, stating it is printing, yet nothing prints.
I typed the IP address into safari and checked the settings everything is enabled and IPV4 is being used.
Have been to canon website and downloaded their drivers but when I open them message states cannot be opened on this operating system.
How do you connect this printer via wireless?
Thanks,
Sally

1. Have you restarted your Mac since installing the printer? Canon-installed software starts automatically (actually for scanner operation) that shows a pop-up to confirm that I want to use the wireless Canon installation during the start process.
Canon isn't clear in communicating that to print wirelessly, you are actually installing the printer as a (WiFi) wireless device on your network hub. Then when you print, your Mac first communicates with the network hub, and then the hub communicates with the printer. So, your BT hub must be on in order to print. (My Canon MP560 works the same way.)
Have you followed the Canon network printing troubleshooting guide available here? --> http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/pixma_mp_series/pixmamp640#BrochuresAndManuals
When installed correctly, your printer should appear in your list of installed printers as a Canon MP640 *with a 6-character hexadecimal address*, such as "Canon MP640 F9A3B1" THAT is the network printer.
You can rename it later, if you so desire. The 6 hexadecimal characters are the last 6 digits of the printer's network hardware address. I(t's called a MAC address, but it has nothing to do with Macintosh.)
The 'Canon MP640 series' setup you have installed can ONLY be accessed via a USB cable, and as you discovered, you cannot change the interface. If you have no need for a USB connection, you can delete that print setup from print/fax preferences.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

Problems printing from Aperture using Epson R340

I have an Epson R340 and happily use all the paper settings such as Glossy print from Photoshop to the printer. Having now installed Aperture I find I am not able to do this. I have reloaded the Epson drivers but still not able to do this. To elaborate when I press Print image from Aperture I go into Print settings - and find that the following items have a line through them - Print Settings, Colormanagement, Printoption and Extenstionsetting. This is not the case when I look at the menu via Photoshop. Can anyone help me on this.

I have an Epson R320 and all the Epson's printer driver options are available to me in Aperture. My list is slightly different: Print Settings, Color Management, Page Layout Settings, and Extension Settings with the words separated by spaces and each has a capitalized first letter.
I'm wondering if Aperture isn't seeing your Epson driver files. You might want to remove the Aperture plist file from your User>Library>Preferences folder and relaunch Aperture.

Installed driver for Canon MP640 printer but when I use comes up with communication error

Hello
I have just purchased a new IMac and have had very little to do with Apple before so everything is foreign. I used the help desk today to download the driver for my printer Canon MP640 which came up as connected with the green light. When I went to print my first document it is now coming up with an error that ther is a "communication error". I am not a techno person and don't have a great deal of patience with technology.
Please helllppp.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Problems printing photographs via Aperture, using Canon MP640

Similar Messages

Maybe you are looking for