Problems running 1.4.1_01 vm under FreeBSD in linux compatibility mode.

Hi.
I currently have a FreeBSD 4.6 box running in linux compatibility mode. We are attempting to get Tomcat 4.1.12 installed. The problem I am currently experiencing is the following:
when logged in as root, java executes perfectly.
when logged in as any non-root user, java generates an abort trap at start up, and prints the following VM error message :
[jeremy@agamemnon ~] $java -server -version
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Server VM (1.4.1_01-b01 mixed mode)
# Error ID: 4F533F4C494E55580E43505002D7
Abort trap
I installed the jdk as root. the JDK in question is the linux tar script one. I have the linux_base 7.1 packages installed for FreeBSD, and have the linux emulation module turned on.
Anyone have any suggestions?
McF

Hello,
I'm having a similar problem, but mine involves Tomcat/JSTL. I'm running FreeBSD 4.7, with JDK 1.4.1_01-b01 (Linux compatiblity mode enabled). The tomcat(4.1.12) server crashes with simplest of jsp pages that issues the following jstl declaration:
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
When tomcat tries to serve this page, tomcat crashes with the following diagnostic message:
Unexpected Signal : 11 occurred at PC=0x2A29B772
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
Dynamic libraries:
Can not get information for pid = 1479
Local Time = Wed Nov 20 09:21:06 2002
Elapsed Time = 38
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002E6
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode)
I've tried using the Apache JSTL also, but got the same results.
Any ideas?
Thanks,
VTrevino

Similar Messages

Problems running Adobe Connect add-in under XenApp

This is a real stab in the dark but it's a serious problem for us. Something has changed recently with Adobe Connect that means the add-in (adobeconnectaddin.exe) is hanging at the "Connecting" prompt. We're running Windows 2003 Terminal Server with Citrix XenApp v5 on top.
I suspect it's a problem with Flash acceleration features baked into HDX Flash, part of XenApp but it used to work. Flash v11.3 or higher broke HDX Flash but I don't think that's the problem as I've gone back to a very basic XenApp build with nothing much apart from the OS, XenApp, Flash v11.2.202.235 and the latest add-in - same crash occurs. If I happen to logon to the console using RDP, the fault doesn't occur hence my reason for suspecting it's the Citrix Receiver client/HDX Flash/Adobe Connect Pro add-in nightmare combo!
But considering I've gone back to an earlier image of XenApp (we keep copies of all builds) from February where Adobe Connect used to work fine, I suspect something has now changed with ACP that's broken it on XenApp.
As I said, it's a shot in the dark because this is a relatively unusual set-up and we're on an old version of XenApp/Windows as well.
But help!
Cheers, Rob.

Rob, it sounds like port 1935 is being blocked. Can you verify that that port is open?
Have you gone to the Test Your Computer page for your connect account. After the diagnostics run, choose to send and email and then click on the details... link to see the results of the test.
Here is a link to that page for our hosted account, if that makes it easier: http://realeyesconnect.adobeconnect.com/common/help/en/support/meeting_test.htm
If needed, Connect only requires FP 10.3 or newer. If it comes to it, an older version of the Flash Player can be tested.

Problems running Photoshop CS6 under OS 10.8 Mountain Lion

Since updating the OS from 10.6.7 to OS 10.8 on iMacs (21" and 24" Intel 2.4GHz) I have experienced problems running Photoshop. The app boots up fine and I can start a project as normal, but when I click on a tool to change it's usage I get the spinning beach ball, this lasts about 5 - 10 seconds and then the tool drop down menu appears. After this, I get the beach ball appearing every few minutes as I try to work, and the only way to get Photoshop running efficiently is to close it down and then restart.
Any ideas as to the cause? I've read on forums from both Adobe and Apple that apparently there are no compatibility issues between Mountain Lion and CS6 but I never had this problem previously under Snow Leopard.

The next two remedial steps would be to reset all tools by right-clicking here:
and if that does not resolve the problem, reset Preferences;
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Does this program have problems running under Parallels / XP ?

I have no problem running this same program under Windows 7, but just tried running it under Parallels/Windows XP. I imported a Photoshop file and I get the "file not found" images for my layers and then when I try to run it for the heck of it, I get an error. This is what it all looks like:
http://www.frchriskeough.com/images/error.png
Argh!
-Dawn

First if you don't have Windows on your machine UnInstall the Virus Software, you don't need it.
You really didn't need to reinstall the OS the problem is with the Software, Word, and Chrome.
After you downloaded Mavericks the software didn't work because the developers of both Word, and Chrome have not updated there software to be compatible with the new Operating System. You will need to keep checking with both of there web sites and there support or downloads to see when they will offer a fix for there software. It is not the fault of Mavericks it is the Software.

Problems running TestStand 4.0 under non-admin account

I am having problems running TestStand 4.0 under a non-admin account under windows XP. I have done the following:
   1. Set full control protection to entire National Instrument directory
   2. tcverselext.exe was giving me problems until I changed it to run in window 95 compatability mode. Otherwise I get an "you do not have administrator priviliges to run this command" error. Don't know if this is the correct fic for this.
   3. Now when starting TestStand I get a "Retrieving COM class factory for component with CLSID {B2794EF6-C0B6-11D0-939C-0020AF68E893} - failed due to the following error: 80040154." error
Everything works fine as administrator.
Can anyone help me?
Don

The Version Selector needs to be run with Administrator Access. When you are running it in Windows 95 Compatability Mode, you are masking the problem. However, once you set the correct version of TestStand, you no longer need Administrator Access to use the Sequence Editor.
Allen P.
NI

Error message under FreeBSD

I've been using Java (JDK 1.3.1_02) under Windows (98, NT and XP) and
Debian/GNU Linux without any problems. I've recently started using
FreeBSD Unix and am encountering a problem whenever I either compile or
run a Java program. After issuing the command, I get the messageexpr: syntax errorbut the program compiles or runs properly.
I've reinstalled the JDK to no avail. Any suggestions would be
appreciated.
TIA,
Mark

You could "debug" the environment.
Maybe your java and javac commands are shell script wrappers (like on Linux) and there is a bug in them.
$ uname -a
Linux bijpc 2.4.4-4GB #1 Fri May 18 14:11:12 GMT 2001 i686 unknown
$ java -version
java version "1.3.1_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_04-b02)
Java HotSpot(TM) Client VM (build 1.3.1_04-b02, mixed mode)
$ type java
java is hashed (/usr/lib/jdk1.3.1_04/bin/java)
$ file /usr/lib/jdk1.3.1_04/bin/java
/usr/lib/jdk1.3.1_04/bin/java: symbolic link to .java_wrapper
$ type .java_wrapper
.java_wrapper is /usr/lib/jdk1.3.1_04/bin/.java_wrapper
$ file /usr/lib/jdk1.3.1_04/bin/.java_wrapper
/usr/lib/jdk1.3.1_04/bin/.java_wrapper: Bourne shell script text
$ grep expr /usr/lib/jdk1.3.1_04/bin/.java_wrapper
link=`expr "$ls" : '.*-> $.*$$'`
if expr "$link" : '/' > /dev/null; then
$

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

"The upload has failed. There was a problem running a virus scan for the file." any ideas???

"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?

Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array.

10.4.10 problem running with lid closed

Installed 10.4.10 last night, and now I'm having a problem running with the lid closed.
Every day at work, I connect my PowerBook G4 1.33GHz to an external display and USB keyboard/mouse (through a USB hub). I have plenty of room on the external display so I don't use the attached LCD panel - I just close the lid and tuck the computer under the monitor riser. It takes a couple seconds for everything to "adjust" when I connect all the hardware (screen turns on and off once or twice), but it always settled down within 10-15 seconds.
After installing 10.4.10, this configuration is totally unusable. After the external display wakes up, I only have a few usable seconds before the computer goes back to sleep. I can wake it again immediately by moving the mouse or hitting a key on the keyboard, but it never stays awake.
I've tried two different USB hubs as well as directly connecting the keyboard and mouse to the laptop, but I get the same behavior in all cases. If I open the lid, the LCD panel comes on and everything works fine (I can use the USB keyboard/mouse and the external display).
Has anyone had a similar problem since updating to 10.4.10? Like a fool, I rushed right into installing the update without doing a backup, so I'm stuck unless the problem gets fixed or I do a rebuild with 10.4.9.
PowerBook G4 1.33GHz Mac OS X (10.4.9)

Take a look at this link, http://support.apple.com/kb/HT1776

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

Problem running AIR app on windows server 2003

Hello,
I have an AIR app that I am trying to run from a Java program under Windows 2003. (It runs perfect on XP and Vista.)
The problem is whenever I try to run the AIR app, it runs "Adobe AIR Updater.exe" which causes the app to not run. And both the process stop responding. I can see them both in Task Manager. I disabled the AIR automatic updates using the Settings Manager application but it still runs the Adobe AIR Updater.exe file.
Any help to resolve this problem would be highly appreciated.

Not sure about copying eulaAccepted file from one location to another - that would really depend on which user account your service is running under.
A better approach (IMHO), is to open the services window (My Computer | <right-click> | Manage, then navigate to Services and expand the tree) so you can see your service on the RHS.
Stop your service, then inspect it's properties, select the 'Log on' tab, then check the checkbox which says "Allow system to interact with desktop". Apply the change, then restart your service.
next time the AIR runtime prompts you to accept the EULA, the window will appear on the screen, so you can click "I accept".
After accepting, reverse the procedure which allowed the service to interact with the desktop, and make sure that you have modified the registry to prevent AIR from updating as mentioned in:
http://help.adobe.com/en_US/AIR/1.5/air_admin/WS5b3ccc516d4fbf351e63e3 d11c0f59823a-7ff0.html
You should be all set.

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Problems running 1.4.1_01 vm under FreeBSD in linux compatibility mode.

Similar Messages

Maybe you are looking for