Problems setting cache size,

Hi,
I hope I m in the right category for this question:
I m reading in a csv table, and putting it in one primary database ( DB_QUEUE )
and several secondary databases ( DB_BTREE ). I m using the Berkeley DB 4.7
for with C++. For the primary database i leave the standart cache size, for the secondary
databases I want to use 16mb:
unsigned long cache_byte= (1024*1024*16);
sec[a]->set_cachesize(0,cache_byte,1)
sec[*] are the secondary databases
and the cache size is set before opening the databases.
The problem is when i run the programm it allocates more and more memory,
but it should just use a little more than a times 16 mb.
Can somebody help me ?

Welcome to the forums !
You might get a better/faster response in the Berkeley DB Forum
Berkeley DB
HTH
Srini

Similar Messages

[MAX] Problems setting the size of my PCI user window

Ok, this may be a very dumb question but I'm just starting to use MAX so please bear with me.
On my VXI system I need to change the size of the PCI user window from it's default 64KB to 16 MB. Therefore, under MAC I went to the PCI setting tab and tried to change it to the desired size. Everytime I try to change it it shows the following message:
"Unable to save configuration changes.
Unable to access configuration information
[-405]"
I guess this means that the configuration file that stores this value in either corrupted, missing, etc. Or that I cannot change that window size in my current system. Does anybody have an idea on how to solve this little problem? thank you.

Hello!
I have a few questions about your configuration. What Operating System are you using? If it is Windows NT/2000, are you logged into an administrator account? If not, do you still get that error when logged in to an administrator account? Also, what VXI controller and version of NI-VXI are you using?

Can't set temp files folder or set cache size

I have a workstation that will not download files, or pick up the auto-proxy settings. Other workstations on the same network work fine, so it is not the user profile or proxy server/config. It happens to all users on this workstation, including the local
admin account.
I have reset IE settings, doesn;t fix. Downloaded and run 4 or five fix-it tools (I used Chrome or another PC to download). I have removed IE from the windows features and settings, rebooted, and added back. Windows update works, updated it to all latest
security patches. If I go to open the downloads folder, it does nothing (Tools-View Downloads), just drops back to the normal browse window. If I try and check/set the temp files, Tools->Options->Browse and click Settings, I see there is no current temp
file location (not even for the loacl admin). I try and set it (by moving) to C:\Users\admininstrator (%username%)\appdata\local\microsoft\windows\Temporary Internet Files\ it accepts, then asks me to log off. Log back on and it's not set. I try and set the
Disk space to use for cache as it is set to zero, and it will ONLY accept 8MB then when I click save (close or whatever), I go back and it is still 0MB.
I have run sfc /scannow, I have reset all user permissions on the Admin user folder.
Sooo00, I use Google Chrome and it works fine - picks up the autoproxy, downloads, opens the download folder. I've disabled all the add-ons. If I set the proxy to autodiscovery, IE hangs and does not disply anything. If I set the proxy script, it does not
work. If I manually set the proxy server and port, browsing is fine except it won't download files when you click on them to save, won't open pdf's.
This all used to work until sometime over Christmas.

Hi,
So we are using IE 11 here? And are we in a domain environment?
In addition, have we checked if this issue exists in
saft mode with networking.?
When doing the uninstallation, please first take a check to see if the previous version of IE could work with the settings mentioned above, after that, take a try to install IE 11 by manually download it from the below link:
Download Internet Explorer 11
Best regards
Michael Shao
TechNet Community Support

Problems with cache.clear()

Hello!
We are having some problems with cache clears in our production cluster that we do once a day. Sometimes heaps "explode" with a lot of outgoing messages when we do a cache.clear() and the entire cluster starts failing.
We had some success with a alternate method of doing the cache clear where we iterate cache.keySet() and do a cache.remove(key) with a pausetime of 100 ms after 20000 objects until the cache is empty. But today nodes started failing on a cache.size() before the removes started (the first thing we do is to log the size of the cache we are about to clear before the remove operations start).
We have multiple distributed caches configured with a near cache. The nearcache has 10k objects as high units and the back caches vary in size, the largest is around 300k / node.
In total the DistributedCache-service is handling ~20 caches.
The cluster consists of 18 storage enabled nodes spread across 6 servers and 31 non storage enabled nodes running on 31 servers.
The invalidation stategy on the near caches is ALL (or, its AUTO but it looks like it selects ALL since ListenerFilterCount=29 and ListenerKeyCount=0 on a StorageManager?)
Parition count is 257, backup count 1, no changes in thread count on the service, service is DistributedCache.
Coherence version 3.6.1.0.
A udp test sending from one node to another displays 60 megabyte/s.
Heapsize for the Coherence JVMs, 3gb. LargePages is used.
Heapsize for the front nodes JVMs, 6gb. LargePages is used.
No long GC-times (until the heaps explode), 0.2-0.6 seconds. CMS-collector.
JDK 1.6 u21 64-bit.
Windows 2k8R2.
We are also running CoherenceWeb and some Read/Write-caches, but on different coherence services. We are not doing any clear/size-operations against caches owed by these services.
Looking at some metrics from the last time we had this problem (where we crashed on cache.size()).
The number of messages sent by the backing nodes went from <100/s to 20k-50k/s in 15 s.
The number of messages resent by the backing nodes went from ~0/s to 1k-50k/s depending on the node in 15 s.
At the time the total number of requests against the DistributedCache-service was around 6-8/s and node.
To my questions, should it be a problem to do a cache clear with this setup (where the largest cache is around 5.4 million entires) ? Should it be a problem to do a cache.size()?
What is the nicest way to do a cache.clear()? Any other strategy?
Could a lock on a entry in the cache cause this problem? Should it really cause a problem with cache.size()?
Any advice?
BR,
Carl
Edited by: carl_abramsson on 2011-nov-14 06:16

Hi Charlie,
Thank you for your answer! Yes, actually we are using a lot of expiry and many of the items are created at roughly the same time! We haven't configured expiry in the cache configuration, instead we do a put with a expire.
Regarding the workload, compared to our peak hours it has been very low when had problems with the size and clear operations. So the backing tier isn't really doing much at the time. That's what has been so strange with this problem.
The release going live today has PRESENT as near cache invalidation strategy. We remove as much of the expire as possible in the next.
BR,
Carl

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

Java.sql.SQLException: Statement cache size has not been set

All,
I am trying to create a light weight SQL Layer.It uses JDBC to connect to the database via weblogic. When my application tries to connect to the database using JDBC alone (outside of weblogic) everything works fine. But when the application tries to go via weblogic I am able to run the Statement objects successfully but when I try to run PreparedStatements I get the following error:
java.sql.SQLException: Statement cache size has not been set
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.jdbc.rmi.internal.ConnectionImpl_weblogic_jdbc_wrapper_PoolConnection_oracle_jdbc_driver_OracleConnection_812_WLStub.prepareStatement(Unknown Source)
i have checked the StatementCacheSize and it is 10. Is there any other setting that needs to be implemented for this to work? Has anybody seen this error before? Any help will be greatly appreciated.
Thanks.

Pooja Bamba wrote:
I just noticed that I did not copy the jdbc log fully earlier. Here is the log:
JDBC log stream started at Thu Jun 02 14:57:56 EDT 2005
DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
DriverManager.getDriver("jdbc:oracle:oci:@devatl")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
Oracle Jdbc tracing is not avaliable in a non-debug zip/jar file
DriverManager.getDriver("jdbc:oracle:oci:@devatl")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
DriverManager.getDriver("jdbc:oracle:oci:@devatl")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
DriverManager.getDriver("jdbc:oracle:oci:@devatl")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
DriverManager.getDriver("jdbc:oracle:oci:@devatl")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@12e0e2f]
registerDriver: driver[className=weblogic.jdbc.jts.Driver,weblogic.jdbc.jts.Driver@c0a150]
registerDriver: driver[className=weblogic.jdbc.pool.Driver,weblogic.jdbc.pool.Driver@17dff15]
SQLException: SQLState(null) vendor code(17095)
java.sql.SQLException: Statement cache size has not been set
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)Hi. Ok. This is an Oracle driver bug/problem. Please show me the pool's definition
in the config.xml file. I'll bet you're defining the pool in an unusual way. Typically
we don't want any driver-level pooling to be involved. It is superfluous to the functionality
we provide, and can also conflict.
Joe
     at oracle.jdbc.driver.OracleConnection.prepareCallWithKey(OracleConnection.java:1037)
     at weblogic.jdbc.wrapper.PoolConnection_oracle_jdbc_driver_OracleConnection.prepareCallWithKey(Unknown Source)
     at weblogic.jdbc.rmi.internal.ConnectionImpl_weblogic_jdbc_wrapper_PoolConnection_oracle_jdbc_driver_OracleConnection.prepareCallWithKey(Unknown Source)
     at weblogic.jdbc.rmi.internal.ConnectionImpl_weblogic_jdbc_wrapper_PoolConnection_oracle_jdbc_driver_OracleConnection_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
SQLException: SQLState(null) vendor code(17095)

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

How to set default max cache size in win 2003 terminal server

Hi! I have a win 2003 terminal server, with 50+ user accounts, the problem is that the cache for firefox is never cleared, how do I set a apropriate (ie 50MB) max cache size for all users? As it is today, I have certain users with several millions of cahe files, which slows everything down.
firefox is 8.01 English version.

Hey Macdaddy,
This happens all the time with our server at work. The server window never opens in the same place twice, and it can be annoying.
There are third-party window management tools out there, but what I did was use a macro program called Keyboard Maestro (since I already owned it).
Among the many things Keyboard Maestro can do is manipulate a window. I created a macro that moves it to a specific point (in my case, the upper left corner of the screen) and then resizes it to a specific width and height in pixels. I then assigned the macro a keyboard shortcut.
Now, when I mount the server, I can use the keyboard shortcut and the window is right where I want it.
There are other programs that just move windows, and I tried a couple. But Keyboard Maestro is more elegant in my opinion, and it does a whole lot more if you choose to go that route.
Hope this helps.
Andy

Problems with increasing/decreasing cache size when live

Hello,
I have configured multiple environments which I'm compacting sequentially and to achieve this I allocate a bigger cache to the env currently being compacted as follows:
Initialization:
DB_ENV->set_cachesize(gbytes, bytes, 1); // Initial cache size.
DB_ENV->set_cache_max(gbytes, bytes); // Maximum size.
While live, application decreases cache of current env when finished and then increases cache of next env using:
DB_ENV->set_cachesize(gbytes, obytes, 0); // Decrease cache size of current env to initial size
DB_ENV->set_cachesize(gbytes, obytes, 0); // Increase cache size of next env to max size.
When I print statistics about the memory pool using DB_ENV->memp_stat I can see that everyting is going normally:
memp_stat: env1 ncache= 8 cache_size=20973592 // env1 is current env
memp_stat: env2 ncache= 1 cache_size=20973592
and then after changing current env:
memp_stat: env1 ncache= 1 cache_size=20973592
memp_stat: env2 ncache= 8 cache_size=20973592 // env2 is now current env
But the problem is that over time memory is leaked (as if the extra memory of each env was not freed) and I'm totally sure that the problem comes from this code.
I'm running Berkeley DB 4.7.25 on FreeBSD.
Maybe some leak was fixed in newer versions and you could suggest to me a patch? or I don't use the API correctly?
Thanks!
Edited by: 894962 on Jan 23, 2012 6:40 AM

Hi,
Thanks for providing the information.
Unfortunately, I don't remember exact test case I was doing, so I did a new one with 32 env.
I set the following for each env:
- Initial cache=512MB/32
- Max=1GB
Before open, I do:
DBEnvironment->set_cachesize((u_int32_t)0, (u_int32_t)512*1024*1024/32, 1);
DBEnvironment->set_cache_max(1*1024*1024*1024, 0);
DBEnvironment->get_cache_max(&gbytes, &obytes); // gives gbytes=1 and obytes=0
After open, I have the following:
DBEnvironment->get_cache_max(&gbytes, &obytes); // gives gbytes=0 and obytes=9502720
memp_stat: cache_size=18644992 cache_ncache=1
So here, the values returned by memp_stat are normal but get_cache_max is strange. Then after increasing the cache to the strange value returned by get_cache_max (gbytes=0, obytes=9502720), I have the following:
DBEnvironment->get_cache_max(&gbytes, &obytes); // gives gbytes=0 and obytes=9502720
memp_stat: outlinks cache_size=27328512 cache_ncache=54
with cache_size being: ((ui64)sp->st_gbytes * GIGA + sp->st_bytes);.
So cache is actually increased...
I try to reproduce this case by opening 1 env as follows.
//Before open
DbEnv->set_cachesize(); 512MB, 1 cache
DbEnv->set_cache_max; 1GB
//After open
DbEnv->get_cachesize; 512MB, 1cache
DbEnv->get_caceh_max; 1GB
memp_stat: cache:512MB, ncache:1, cache_max:1GB
//Decrease the cache size
DbEnv->set_cachesize(); 9MB(9502720B), 1 cache
DbEnv->get_cachesize; 512MB, 1cache
DbEnv->get_caceh_max; 1GB
memp_stat: cache:512MB, ncache:1, cache_max:1GB
All the result is expected. Since when resizing the cache after DbEnv is open, it is rounded to the nearest multiple of the region size. Region size means the size of each region specified initially. Please refer to BDB doc: [http://docs.oracle.com/cd/E17076_02/html/api_reference/C/envset_cachesize.html|http://docs.oracle.com/cd/E17076_02/html/api_reference/C/envset_cachesize.html]. Here region size is 512MB/1cache = 512MB. And I don't think you can resize the cache smaller than 1 region.
Since you are opening 32 env at the same time with 512MB cache and 1GB maximum for each, when the env is open, whether it can allocate as much as that specified for the cache, is dependent on the system. I am guess the number 9502720 got from get_cache_max after opening the env is probably based on the system and app request, the cache size you can get when opening the env.
And for the case listed in the beginning of the post
While live, application decreases cache of current env when finished and then increases cache of next env using:
DB_ENV->set_cachesize(gbytes, obytes, 0); // Decrease cache size of current env to initial size
DB_ENV->set_cachesize(gbytes, obytes, 0); // Increase cache size of next env to max size.
When I print statistics about the memory pool using DB_ENV->memp_stat I can see that everyting is going normally:
memp_stat: env1 ncache= 8 cache_size=20973592 // env1 is current env
memp_stat: env2 ncache= 1 cache_size=20973592
and then after changing current env:
memp_stat: env1 ncache= 1 cache_size=20973592
memp_stat: env2 ncache= 8 cache_size=20973592 // env2 is now current envWhen env1 is finishing soon, what numbers do you set in set_cachesize to decrease the cache, including the number of caches and cache size?
When decreasing the cache, I do:
env->GetDbEnv()->set_cachesize((u_int32_t)0, (u_int32_t)20973592, 0);
I mean, in all cases I simply set cachesize to its original value (obtained after open through get_cachesize) when decreasing and set cachesize to its max value when increasing (obtained though get_cache_max; plus I do something like cacheMaxSize * 0.75 if < 500MB).I can reproduce this case. And I think the result is expected. When using DBEnv->set_cachesize() to resize the cache after env is opened, the ncache para is ignored. Please refer to BDB doc here: [http://docs.oracle.com/cd/E17076_02/html/api_reference/C/envset_cachesize.html|http://docs.oracle.com/cd/E17076_02/html/api_reference/C/envset_cachesize.html] . Hence I don't think you can decrease the cache size by setting the number of cache to 0.
Hope it helps.

Java 1.4.2 default cache size problems

Hello all -
I am delivering panoramic image Virtual Travel® tours via Flash and the Java PTviewer applet, e.g. http://www.taj-mahal.net
We want to deliver much larger & "full screen" panoramas as well. This all works fine on PCs (sigh), but not on Macs.
On the Mac, I am seeing hanging" during loading of panos, and traced this to the fact that Windows typically has a 60 MB Java cache. I thought this was the same for Mac, but ....
I note that my Java 1.4.2 Plug-In Control Panel shows that only 50 MB is allocated. Since I have not adjusted this, I wonder...
a) Is the default Java cache for Mac OSX set a 50 MB after installation? Would most typical Mac users then have only 50 MB of Java cache?
b) Is there a user-friendly way to adjust the Java cache size up to 60 MB on the Mac? Some application or AppleScript or some such? If so, I can post an error message when (poor) Mac users try to view our large panoramas.
( I want to avoid trying to explain how to find and use the Java Plug-In control panel.... )
Thanks for your help !
William
G4 dual 1.25GHz ( London, UK )

Where does that prerequisite come from?
On linux x86, Oracle provides the j2se jdk/jre for OracleAS itself, meaning OracleAS Forms & Reports services 9.0.4 does not require you to install a JDK. I think that actually the requirement is that you should not install any JDK. Of course, some other software might require you to install 1.4.2 java sdk.
You can find the AS 9.0.4 docu libraries here:
http://www.oracle.com/technology/documentation/appserver10g.html
(see docu library B13597_05, Platform tab for installation guides)

Setting the size of a shared entity cache

Hi,
I am using WLS 7.1 and have a few entity beans that use a shared
application-level cache. I would like to set the size of this cache using
the admin console.
As this property is specified in the weblogic-application.xml file, I
attempted to access the page in the Admin console Deployment Descriptor
Editor that lets you modify this deployment descriptor.
However, clicking on the Weblogic-application node in the deployment
descriptor editor gives me an Error 404--Not Found message.
Any ideas why this is happening?
Thanks in advance.
Santosh
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.754 / Virus Database: 504 - Release Date: 6/09/2004

Hi,
I am using WLS 7.1 and have a few entity beans that use a shared
application-level cache. I would like to set the size of this cache using
the admin console.
As this property is specified in the weblogic-application.xml file, I
attempted to access the page in the Admin console Deployment Descriptor
Editor that lets you modify this deployment descriptor.
However, clicking on the Weblogic-application node in the deployment
descriptor editor gives me an Error 404--Not Found message.
Any ideas why this is happening?
Thanks in advance.
Santosh
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.754 / Virus Database: 504 - Release Date: 6/09/2004

Can't increase cache size, though i set it to 500mb it shows 27.65mb,what should i do??

i am unable to increase cache size. whatever i put in the setting it says max cache limit 27.65 mb. I have 3 gb ram and 200 gb hard disk.

Mark the question as solved. Please!

Is there a solution to Rapidweaver Stacks Cache size problems?

Is there a solution to Rapidweaver Stacks Cache size problems?
My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
Does anyone know a solution and / or what is the cause of this?

once more,
i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them.

Warning: Cache size set too large?

I've recently installed a SSD to work as a dedicated cache drive, and I've directed the 3 cache settings in AE (CS6) to it.
The drive is 240GB, but I can't put the cache size over 150GB without getting a warning that it's set too high. Is this true? Am I wasting almost 100GB?

Use your drive for something else. 150GB is a huge huge cache. The CS6 disk cache is glitchy anyway. I have mine turned off most of the time.

Unable to set Oracle driver statement cache size to 300

Hi Friends,
when i am starting thread pool worker using threadpoolworker using threadpoolworker.cmd i am getting the error as follows
The root LoggedException was: Unable to set Oracle driver statement cache size to 300
at com.splwg.shared.common.LoggedException.raised(LoggedException.java:65)
at com.splwg.base.support.sql.OracleFunctionReplacer.setOracleCacheSize(OracleFunctionReplacer.java:232)
at com.splwg.base.support.sql.OracleFunctionReplacer.initializeConnectionForNewSession(OracleFunctionReplacer.java:207)
at com.splwg.base.support.context.FrameworkSession.initialize(FrameworkSession.java:225)
at com.splwg.base.support.context.FrameworkSession.<init>(FrameworkSession.java:194)
at com.splwg.base.support.context.ApplicationContext.createSession(ApplicationContext.java:417)
at com.splwg.base.support.context.ApplicationContext.createThreadBoundSession(ApplicationContext.java:461)
at com.splwg.base.support.context.SessionExecutable.doInReadOnlySession(SessionExecutable.java:96)
at com.splwg.base.support.context.SessionExecutable.doInReadOnlySession(SessionExecutable.java:79)
at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:211)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:114)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:90)
at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:498)
at com.splwg.base.api.batch.StandaloneExecuter.setupContext(StandaloneExecuter.java:258)
at com.splwg.base.api.batch.StandaloneExecuter.run(StandaloneExecuter.java:129)
at com.splwg.base.api.batch.StandaloneExecuter.main(StandaloneExecuter.java:357)
at com.splwg.base.api.batch.AbstractStandaloneRunner.invokeStandaloneExecuter(AbstractStandaloneRunner.java:403)
at com.splwg.base.api.batch.AbstractStandaloneRunner.run(AbstractStandaloneRunner.java:134)
at com.splwg.base.api.batch.ThreadPoolWorker.run(ThreadPoolWorker.java:24)
at com.splwg.base.api.batch.ThreadPoolWorker.main(ThreadPoolWorker.java:17)
can any one tell me the exact error
shyam.

Hi Friends,
when i am starting thread pool worker using threadpoolworker using threadpoolworker.cmd i am getting the error as follows
The root LoggedException was: Unable to set Oracle driver statement cache size to 300
at com.splwg.shared.common.LoggedException.raised(LoggedException.java:65)
at com.splwg.base.support.sql.OracleFunctionReplacer.setOracleCacheSize(OracleFunctionReplacer.java:232)
at com.splwg.base.support.sql.OracleFunctionReplacer.initializeConnectionForNewSession(OracleFunctionReplacer.java:207)
at com.splwg.base.support.context.FrameworkSession.initialize(FrameworkSession.java:225)
at com.splwg.base.support.context.FrameworkSession.<init>(FrameworkSession.java:194)
at com.splwg.base.support.context.ApplicationContext.createSession(ApplicationContext.java:417)
at com.splwg.base.support.context.ApplicationContext.createThreadBoundSession(ApplicationContext.java:461)
at com.splwg.base.support.context.SessionExecutable.doInReadOnlySession(SessionExecutable.java:96)
at com.splwg.base.support.context.SessionExecutable.doInReadOnlySession(SessionExecutable.java:79)
at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:211)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:114)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:90)
at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:498)
at com.splwg.base.api.batch.StandaloneExecuter.setupContext(StandaloneExecuter.java:258)
at com.splwg.base.api.batch.StandaloneExecuter.run(StandaloneExecuter.java:129)
at com.splwg.base.api.batch.StandaloneExecuter.main(StandaloneExecuter.java:357)
at com.splwg.base.api.batch.AbstractStandaloneRunner.invokeStandaloneExecuter(AbstractStandaloneRunner.java:403)
at com.splwg.base.api.batch.AbstractStandaloneRunner.run(AbstractStandaloneRunner.java:134)
at com.splwg.base.api.batch.ThreadPoolWorker.run(ThreadPoolWorker.java:24)
at com.splwg.base.api.batch.ThreadPoolWorker.main(ThreadPoolWorker.java:17)
can any one tell me the exact error
shyam.

Problems setting cache size,

Similar Messages

Maybe you are looking for