PROBLEMS SETTING UP REPORTS SECURITY FEATURE

1. Trying to follow instructions to set up the Reports Security Feature.
2. Successfully run the script rwwwvins.sql
3.Hitting following Error
" Missing string(reports_security_desc) language(us) domain (wwc)sub_domain
(sec)
The portlets have similar names.
The pageORACLE_REPORTS_SECURITY has a display name of :
Missingstring(reports_security_desc) language(us) domain (wwc) sub_domain
(sec)"
4. Followed note 132625.1 with no joy. Same error.
Any help ?
null

do you mean to say that you cannot enter any passphrase on the router web ui or on the wireless computer itself ??
if its on the router , then upgrade / reflash the router's firmware...

Similar Messages

Problem setting up 5Ghz security on WRT610Nv2 2.00.00.B05

Was able to set up my WRT610v2 to use WEP on the 2.4 Ghz side with the same key as my old router and my network is running fine. When I go to set up the 5Ghz side however I'm seeing a really odd problem even the Cisco tech rep I chatted with could not figure out. When I try to select the Security Mode in the 5Ghz Wireless Security section the dropdown menu only shows 3 options: Disable, WPA2-Personal and WPA2-Enterprise. The manual says that I have to use WEP throughout but that isn't listed as an option. Any idea why this should be happening? I checked the firmware version and I'm running 2.00.00.B05; the Cisco rep is trying to talk me into flashing 2.00.00.05 but could not tell me whether the "B" in the name of the version I'm running has any significance. My version does show a date on the version that precedes the copy on the website by 12 days but I can't see any reason to believe that's significant.
I will switch to WPA2 at some point when I have time to amend the other devices in the network; that just doesn't happen to be now.

Thanks for the feedback; last night after I posted this I discovered something that perhaps everyone else knows and I just missed in the documentation. Since all the devices I want to use the 5Ghz band are 802.11n I decided to set that band's Network Mode to Wireless-N only. Apparently when you do this it limits your security selections (for reasons I do not know) to WPA2 or disabled. When I went back and changed Network Mode to Mixed the security options available expanded to include WEP. I now have part of my network running WEP on that SSID, part running on the SSID for the 2.4 Ghz band.
Does anyone know if there is a difference between the firmware version 2.00.00.B05 the router shipped with and the 2.00.00.05 version available for download? The tech I spoke to last night at first didn't even seem to realize I was seeing the extra character "B" in the version and when I pointed it out the second or third time had no explanation for its being there. The downloadable version does have a date that is 12 days later than the shipped version but I don't see much significance in that by itself. If there is a real reason to reflash I'd be happy to do it but would rather not without cause.
If WEP can be used in mixed mode is there some reason it cannot be in Wireless-N only mode? Sometimes the difference between a "feature" and a bug can be obscure...

Problems setting integrated security to false on sub reports

We can set the integrated security to false on the main report, but for some reason it is not working on sub reports. Is there an issue with this? Possibly a patch we need to apply?
I downloaded the SP0 patch for CR2008 and attempted to apply it, but it said something about doing this from control panel. I normally would expect a DOC or TXT file with some instructions on patching, but I just keep getting redirected to the business objects web site generic page when I try to get more information.

Please have a look at this White Paper. It should be quite helpful with this issue:
https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1219774&_NLANG=E
Ludek

Problems setting up used ipa2 with ios7 due to Find My My Ipad Feature being left on by previous owner

Hi!! Im having problems setting up a used ipad 2.with ios7. The previous owner forgot to turn off the find my ipad feature so now its asking me for her itunes username an password. I dont have that info and i lost her phone number

yes my friend ios 7 was already loaded on when i bought it. The person who sold it to me left the find my ipad feature ON. I called her and she said she would be in the next day to buy it back and since i actually belived her i threw away her phone number. i dont know what i was thinking

Report Manager: How to make value sets appear in security workbench

Hi:
R12.1.3
In Report Manager Security Workbench, when I search for value sets, I see none of the custom value sets I created. Can anyone tell me what the rules are for accessing a custom value set through the Security Workbench?
Thanks.

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Security features in AA Pro & Acrobat Reader problem

Hi,
In Adobe Acrobat Pro my PDF is shown to have "no security" - everything is allowed.
When I open that saved documnet in Reader 9.4 it has security features I did not put there.
In particular, no adding of comments (and markups).
Any ideas how to resolve problem welcome.

Thanks Graffiti,
There seems no problem with the AA pro - opening advanced features - under security properties everything is allowed.
The problem is that when I open that same PDF in Acrobat Reader (which has no "Advanced") it does nlot allow the adding of comments.
In Acrobat Reader on toolbar under Document > Security > Show Security Properties : Security : Document Restrictions Summary : under Commenting it is marked : Not Allowed.
Any idea how to get around this.
What I want to do is to be able to make PDFs and send then to someone else for adding comments but Reader does not allow this and I am not disabling it when I make the PDF with AA Pro.
Cheers

Problem due to Ironport Data Security feature

We are using S160 (version 6.0.1-006) in forward mode and as soon as we enable Ironport Data Security feature the WSA stops responding after some time for few minutes and then starts processing http requests. This happens after every 5-10 mins. and ultimately we have to disable the Data security feature. Once the feature is disabled the WSA works smoothly. Please help......

Hi,
If you haven't already, I suggest opening a ticket with customer support.
Jennie

I purchased an iphone 4s secondhand but now i find that the person has a security feature still locked onto the phone and they are not responding to my message. Is there any way to resolve this problem.

How do I resolve an issue with a secondhand phone purchase that has a security feature link to it and it hasnt been removed therefore I cant use the phone.

Hi paisley,
Sorry, there is no way around the Activation Lock. You either need to contact the original owner and get them to turn off Find My iPhone and wipe the phone from their iCloud account, or you need to return it to the seller.
Sorry,
GB

Saving to PDF using VBA in Excel 2007 using security features such as password and print restriction

Good Afternoon,
I am wondering if there is a way to implement the security features such as password and print restriction while saving a document to PDF using VBA in Excel 2007.
Regards,
Steve

Bill,
Thank you. I was able to find the security setting section. The problem I have now, however, is writing the VBA to save to PDF and incorporate the security settings. I thought if i applied the settings to the Excel document I was working on it would carry over, but this does not seem to be the case. Any idea's?
Regards,
Steve

Problem after run report with spreadsheet

hi evry one
ther an a problem after run report with spreadsheet .
after runing iexplorar open and close fast no thing else
when i check the job from appserver job success with spreadsheet dis format.
what shall i do.
thanks.

Hello,
Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
If yes , take a look to : "IE7 windows opened and closed immediatly"
http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the solution suggested :
We have found the setting that we needed, under the Internet Options
Security tab, if you select the internet zone, and click the custom level
button, then scroll down to the Downloads section, the first option is
Automatic prompting for file downloads, setting this to enable keeps IE 7
from interfering with this sort of download.
Regards
Example with screen shots :
http://www.celt.iastate.edu/webct/securitysettings.html
Regards

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

DSC and security features: automatic logout

Hello,
I'm using the security features of LabVIEW 8.5.1 and the DSC module.
Does someone know how to enable the automatic logout feature (logout after a specified time without user interaction)?
Thanks in advance.
Tom
Solved!
Go to Solution.

Hello Ben,
meanwhile a NI-Support-Engineer provided an answer for that issue:
If you are using LabVIEW DSC 7.1 there should be an
option in the menu where you can set the minutes of inactivity
until the automatic logout.
In LabVIEW 8.x you will have to implement this on your
own. There is a VI that will do the logout itself but the
timing needs to be implemented by yourself.
So Ben, you are right: this functionality is simply not available anymore in LabVIEW 8.x!
There is an KnowledgeBase document targeting that problem:
http://digital.ni.com/public.nsf/allkb/0A8C5B624365A25E8625721100548970?OpenDocument
but the contained example VI doesn't make too much sense.
The problem is that the DSC_Lougout.vi ignores the "idle" in "Minutes idle until logout". It simply logs out the user after a specific time elapsed without considering if the user is still active.
Regards,
Thomas

Security features not showing in Acrobat Reader 8?

Just curious why the security features of an older version of Acrobat don't display in the document properties when opened with Reader 8. We do some automated processing, using Acrobat 7.0.7 Pro as the main processor, but when we run into problems with incoming documents, I've found that Reader 8 doesn't seem to see the properties.

I think that probably no security is set. The issue with AA7 is likely that it is the prior version of AA and it does not allow editing of the current version. If you save the PDF from AA8 with Reduce File Size or PDF Optimize, you can make it backward compatible for editing. One option you can try in AA7 is to print it to a new PDF, but that may not work either.

Problem in ALV report

Hi Friends,
I have the following 2 problems in ALV report
1) Logo is not getting displayed in the report.
2) When i click on the Purchase order number in the report the interactive report is not working,i am not able to see report of First interactive level.
can you help it out friends.
Thanks and regards
Dinesh
REPORT YSDBALV1
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line .
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
      ebeln like ekko-ebeln ,           "Purchasing Document No.
      bedat like ekko-bedat ,           "Purchasing Document Date
      matnr like ekpo-matnr ,           "Material No.
      netwr like ekpo-netwr ,         "Net Order Value in PO Currancy
      meins like ekpo-meins ,           "UOM
      chk(1) ,
      light(1) ,
      change like ekpo-menge ,
      end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
   message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*&      Form get_data
      text
--> p1        text
<-- p2        text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
       EKKO~BEDAT
       EKPO~EBELP
       EKPO~MATNR
       EKPO~NETWR
       EKPO~MEINS
       EKPO~MENGE
       EKPO~BPRME
       INTO CORRESPONDING FIELDS OF table IT_FINAL
       FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
       WHERE EKKO~EBELN IN S_EBELN.
       APPEND IT_FINAL.
endform.                    " get_data
*Getting the Event for Top of Page display.
*&      Form event
      text
     -->P_I_event[] text
form event using    p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = p_i_event
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
read table p_i_event with key name = slis_ev_top_of_page into i_event.
      if sy-subrc = 0.
             move 'TOP_OF_PAGE_PO' to i_event-form.
             modify p_i_event from i_event index sy-tabix transporting form.
      endif.
      clear i_event.
endform.                    " event
*Display Top-of Page Details and Logo
form top_of_page_po .
       clear i_header .
       refresh i_header .
       write sy-datum to text.
       i_header-typ = 'H'.
       i_header-info = 'PURCHASE OREDER DETAILS'.
       append i_header.
      *Logo Display
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
             EXPORTING
                 it_list_commentary       = i_header[]
                 I_LOGO                   = 'ENJOYSAPLOGO'.
endform .
*Field Catalog Append
*&      Form field
      text
     -->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
     clear fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order No'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'BEDAT'.
      fieldcatalog-seltext_m   = 'PO Date'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material No'.
      fieldcatalog-col_pos     = 4.
      fieldcatalog-outputlen   = 20.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'NETWR'.
      fieldcatalog-seltext_m   = 'Net Value '.
      fieldcatalog-col_pos     = 5.
      fieldcatalog-outputlen   = 20.
      fieldcatalog-do_sum = 'X'.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Units'.
      fieldcatalog-col_pos     = 6.
      fieldcatalog-outputlen   = 4.
      append fieldcatalog .
      clear fieldcatalog.
endform.                    " field
*&      Form layout
      text
form layout using    p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
    i_layout-lights_fieldname = 'LIGHT'.
    i_layout-lights_tabname = 'IT_FINAL'.
    i_layout-box_fieldname = 'CHK'.
    i_layout-box_tabname = 'IT_FINAL'.
    i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
                 SLIS_T_EXTAB.
                 SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
                         rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index   rs_selfield-tabindex.
write:/ IT_FINAL-ebeln.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*&      Form grid_display
      text
--> p1        text
<-- p2        text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = SY-REPID
   I_CALLBACK_PF_STATUS_SET          = 'SET_PO_PF_STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = I_LAYOUT
    IT_FIELDCAT                       = FIELDCATALOG[]
    IT_EVENTS                         = I_EVENT[]
TABLES
    t_outtab                          = IT_FINAL.
endform.                    " grid_display

*& Report YSDBALV1
REPORT YSDBALV1.
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line ,
     wa_event type line of slis_t_event.
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table p_i_event with key name = slis_ev_top_of_page into wa_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAP_LOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
set parameter id 'VL1' field it_final-ebeln.
call transaction 'ME23N'.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display
Regards,
Rusidar S.

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

PROBLEMS SETTING UP REPORTS SECURITY FEATURE

Similar Messages

Maybe you are looking for