Problems setting up Wordpress + Cherokee on home made server

Hi guys! I'm having some problems as is written in the title...I'd want to port my xampp+wordpress blog to a standard cherokee+mysql+wordpress...
So i've followed this points:
- export old database
- installed libmysqlclient mysql mysql-clients cherokee wordpress
- created database and imported all the old table in it
- modified wp-config.php
- chown to http:http the /srv/http/wordpress folder
- followed this guide to create a vHost only for wordpress
- started all daemons
Then i've tried to go to mydomain/wp-admin/install.php, but it doesn't works...It say my Server error, the link can be down for manteinance or configured incorrectly...
What i've missed?
Last edited by dieghen89 (2010-10-22 15:43:26)

Is there perhaps a mod_rewrite rule interfering? You could check for a .htaccess file. It might also prevent you from reaching the correct page.
If you put a html file in the root of the document_root, can you access that?
e.g. :
server.com/test.html
Last edited by madeye (2010-10-22 16:51:01)

Similar Messages

Setting up a publically-visible home web server w/ DSL residential?

Is there a how-to guide for setting up a small publically-visible home web server, basically for testing purposes?
I have a DSL modem, Westell.
The web server software is running and I can see the site on my home network, but everyone else on the Internet gets a timeout. The server is not reachable.
When I run traceroutes, the Modem's IP address does not show a timeout, but the Computer's IP address does show a timeout. This is with all firewall software disabled.
Can anyone help?

Before I try to help you, I am just wondering.
Since you are using this server for testing, why does it have to be publically-visible?
In the meantime as I wait for that reply to my question, pre-check list for allowing user from the net to connect you:
#1 The Default Gateway on your computer is the same IP Address as the Westell A90-750015-07?
For example, if on Windows XP
a) Go to Start -> Run.
b) Type in cmd and press enter.
c) In the new window, called the command prompt, type in ipconfig /all and press enter.
#2 In the router go to Advanced -> Private LAN
#3 What is the Starting and Ending IP Address?
#4 In the router go to Advanced -> Universal Plug and Play
#5 If you do not have at least two game consoles behind this two router, turn off UPnP in the router.
By game console, a special type of computer with no keyboard or mouse (and it/they are usually connected to a TV).
#6 In the router go to System Monitoring -> Gateway Status
#7 With another web browser Window OR Tab, go to https://www.grc.com/x/ne.dll?bh0bkyd2
#8 Below the text that says The text below might uniquely identify you on the Internet is an IP Address.
#9 In the web browser window or tab, that is still looking in the router, you should see that same IP Address.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Problems setting up an Apache PHP and MySQL server(slvd)

I folowed this guide: http://wiki.archlinux.org/index.php/LAMP and I did everything it says and everything is working well... but when I try to install any CMS that uses MySQL, it says that mysql is not running... Even with Nmap, it only shows that apache is running... anyone knows why ?
when I'm installing Xoops, it prints this error:
Fatal error:
mysql extension not loaded in /home/httpd/html/xoops-2.2.3a-final-xpr/html/class/database/mysqldatabase.php on line 74
But, phpMyAdmin runs without any errors... this is so strange...
Can anyone help me ?
Thanks in advance

I don't have any extension=mysql.dll in my php.ini.... I just have extension=mysql.so...
Here's my <?
phpinfo();
?>
This is Arch Linux, running PHP.
PHP Logo
PHP Version 5.1.1
System Linux localhost 2.6.15 #4 PREEMPT Mon Jan 9 13:16:27 CAT 2006 i686
Build Date Dec 5 2005 11:31:11
Configure Command './configure' '--with-apxs2' '--prefix=/usr' '--sysconfdir=/etc' '--with-layout=PHP' '--with-ttf' '--enable-mailparse' '--with-config-file-scan-dir=/etc' '--enable-bcmath=shared' '--enable-calendar=shared' '--enable-ftp=shared' '--enable-gd-native-ttf' '--enable-magic-quotes' '--enable-posix=shared' '--enable-session' '--enable-shared' '--enable-shmop=shared' '--enable-pdo=shared' '--enable-sqlite-utf8' '--enable-sockets=shared' '--enable-xml' '--enable-sysvsem=shared' '--enable-sysvshm=shared' '--enable-sysvmsg=shared' '--enable-track-vars' '--enable-trans-sid' '--enable-safe-mode' '--with-imap' '--with-imap-ssl' '--with-ncurses' '--with-readline' '--with-bz2=shared' '--with-curl' '--with-mime-magic' '--with-freetype-dir=/usr' '--with-gd=shared' '--enable-exif' '--with-jpeg-dir=/usr' '--enable-dba' '--without-db2' '--without-db3' '--with-inifile' '--with-flatfile' '--with-gdbm' '--with-ldap=shared' '--with-openssl' '--with-gettext' '--with-unixODBC=shared,/usr' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-mysqli=shared' '--with-mysql-sock=/tmp/mysql.sock' '--with-pdo-mysql=shared,/usr' '--with-mysql=shared,/usr' '--with-pgsql=shared' '--with-pgsql-sock=/tmp/pgsql.sock' '--with-pdo-pgsql=shared,/usr' '--with-sqlite=shared' '--with-pdo-sqlite=shared,/usr' '--with-pear=/usr/share/pear' '--with-dom' '--with-dom-xslt' '--with-xsl' '--with-png-dir=/usr' '--with-regex=php' '--with-zlib' '--enable-mbstring=all' '--enable-mbregex'
Server API Apache 2.0 Handler
Virtual Directory Support disabled
Configuration File (php.ini) Path /usr/lib
Scan this dir for additional .ini files /etc
additional .ini files parsed /etc/php.ini
PHP API 20041225
PHP Extension 20050922
Zend Extension 220051025
Debug Build no
Thread Safety disabled
Zend Memory Manager enabled
IPv6 Support enabled
Registered PHP Streams php, file, http, ftp, compress.zlib, https, ftps, compress.bzip2
Registered Stream Socket Transports tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, convert.iconv.*, zlib.*, bzip2.*
Zend logo This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.1.0, Copyright (c) 1998-2005 Zend Technologies
PHP Credits
Configuration
PHP Core
Directive Local Value Master Value
allow_call_time_pass_reference On On
allow_url_fopen On On
always_populate_raw_post_data Off Off
arg_separator.input & &
arg_separator.output & &
asp_tags Off Off
auto_append_file no value no value
auto_globals_jit On On
auto_prepend_file no value no value
browscap no value no value
default_charset no value no value
default_mimetype text/html text/html
define_syslog_variables Off Off
disable_classes no value no value
disable_functions no value no value
display_errors On On
display_startup_errors Off Off
doc_root no value no value
docref_ext no value no value
docref_root no value no value
enable_dl On On
error_append_string no value no value
error_log no value no value
error_prepend_string no value no value
error_reporting 2039 2039
expose_php On On
extension_dir /usr/lib/php/extensions/php /usr/lib/php/extensions/php
file_uploads On On
highlight.bg #FFFFFF #FFFFFF
highlight.comment #FF8000 #FF8000
highlight.default #0000BB #0000BB
highlight.html #000000 #000000
highlight.keyword #007700 #007700
highlight.string #DD0000 #DD0000
html_errors On On
ignore_repeated_errors Off Off
ignore_repeated_source Off Off
ignore_user_abort Off Off
implicit_flush Off Off
include_path .:/usr/share/pear .:/usr/share/pear
log_errors Off Off
log_errors_max_len 1024 1024
magic_quotes_gpc On On
magic_quotes_runtime Off Off
magic_quotes_sybase Off Off
mail.force_extra_parameters no value no value
max_execution_time 30 30
max_input_time 60 60
open_basedir no value no value
output_buffering no value no value
output_handler no value no value
post_max_size 8M 8M
precision 12 12
realpath_cache_size 16K 16K
realpath_cache_ttl 120 120
register_argc_argv On On
register_globals Off Off
register_long_arrays Off Off
report_memleaks On On
report_zend_debug On On
safe_mode Off Off
safe_mode_exec_dir no value no value
safe_mode_gid Off Off
safe_mode_include_dir no value no value
sendmail_from [email protected] [email protected]
sendmail_path /usr/sbin/sendmail -t -i /usr/sbin/sendmail -t -i
serialize_precision 100 100
short_open_tag On On
SMTP localhost localhost
smtp_port 25 25
sql.safe_mode Off Off
track_errors Off Off
unserialize_callback_func no value no value
upload_max_filesize 2M 2M
upload_tmp_dir no value no value
user_dir no value no value
variables_order EGPCS EGPCS
xmlrpc_error_number 0 0
xmlrpc_errors Off Off
y2k_compliance On On
zend.ze1_compatibility_mode Off Off
apache2handler
Apache Version Apache
Apache API Version 20020903
Server Administrator [email protected]
Hostname:Port laptop-do-joao.net:0
User/Group nobody(99)/99
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 15
Virtual Server No
Server Root /usr
Loaded Modules core prefork http_core mod_so mod_access mod_actions mod_alias mod_asis mod_auth mod_auth_anon mod_auth_dbm mod_auth_digest mod_autoindex mod_cgi mod_dav mod_dav_fs mod_dir mod_env mod_expires mod_ext_filter mod_headers mod_imap mod_include mod_info mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_speling mod_ssl mod_status mod_userdir mod_vhost_alias mod_php5
Directive Local Value Master Value
engine 1 1
last_modified 0 0
xbithack 0 0
Apache Environment
Variable Value
HTTP_HOST laptop-do-joao.net
HTTP_USER_AGENT Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
HTTP_ACCEPT text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
HTTP_ACCEPT_LANGUAGE en-us,en;q=0.5
HTTP_ACCEPT_ENCODING gzip,deflate
HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.7
HTTP_KEEP_ALIVE 300
HTTP_CONNECTION keep-alive
PATH /bin:/usr/bin:/sbin:/usr/sbin
SERVER_SIGNATURE <address>Apache Server at laptop-do-joao.net Port 80</address>
SERVER_SOFTWARE Apache
SERVER_NAME laptop-do-joao.net
SERVER_ADDR 127.0.0.1
SERVER_PORT 80
REMOTE_ADDR 127.0.0.1
DOCUMENT_ROOT /home/httpd/html
SERVER_ADMIN [email protected]
SCRIPT_FILENAME /home/httpd/html/test.php
REMOTE_PORT 33973
GATEWAY_INTERFACE CGI/1.1
SERVER_PROTOCOL HTTP/1.1
REQUEST_METHOD GET
QUERY_STRING no value
REQUEST_URI /test.php
SCRIPT_NAME /test.php
HTTP Headers Information
HTTP Request Headers
HTTP Request GET /test.php HTTP/1.1
Host laptop-do-joao.net
User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
Accept text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language en-us,en;q=0.5
Accept-Encoding gzip,deflate
Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive 300
Connection keep-alive
HTTP Response Headers
X-Powered-By PHP/5.1.1
Keep-Alive timeout=15, max=100
Connection Keep-Alive
Transfer-Encoding chunked
Content-Type text/html; charset=ISO-8859-1
bcmath
BCMath support enabled
bz2
BZip2 Support Enabled
Stream Wrapper support compress.bz2://
Stream Filter support bzip2.decompress, bzip2.compress
BZip2 Version 1.0.3, 15-Feb-2005
calendar
Calendar support enabled
ctype
ctype functions enabled
curl
CURL support enabled
CURL Information libcurl/7.15.0 OpenSSL/0.9.7h zlib/1.2.3
date
date/time support enabled
Timezone Database Version 2005.14
Timezone Database internal
Default timezone Africa/Khartoum
Directive Local Value Master Value
date.timezone no value no value
dba
DBA support enabled
Supported handlers gdbm cdb cdb_make inifile flatfile
dom
DOM/XML enabled
DOM/XML API Version 20031129
libxml Version 2.6.22
HTML Support enabled
XPath Support enabled
XPointer Support enabled
Schema Support enabled
RelaxNG Support enabled
exif
EXIF Support enabled
EXIF Version 1.4 $Id: exif.c,v 1.173.2.2 2005/10/10 06:09:25 helly Exp $
Supported EXIF Version 0220
Supported filetypes JPEG,TIFF
ftp
FTP support enabled
gettext
GetText Support enabled
iconv
iconv support enabled
iconv implementation glibc
iconv library version 2.3.5
Directive Local Value Master Value
iconv.input_encoding ISO-8859-1 ISO-8859-1
iconv.internal_encoding ISO-8859-1 ISO-8859-1
iconv.output_encoding ISO-8859-1 ISO-8859-1
imap
IMAP c-Client Version 2004
SSL Support enabled
libxml
libXML support active
libXML Version 2.6.22
libXML streams enabled
mbstring
Multibyte Support enabled
Multibyte string engine libmbfl
Multibyte (japanese) regex support enabled
Multibyte regex (oniguruma) version 3.7.1
mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.
Directive Local Value Master Value
mbstring.detect_order no value no value
mbstring.encoding_translation Off Off
mbstring.func_overload 0 0
mbstring.http_input pass pass
mbstring.http_output pass pass
mbstring.internal_encoding ISO-8859-1 no value
mbstring.language neutral neutral
mbstring.substitute_character no value no value
mime_magic
mime_magic support enabled
Directive Local Value Master Value
mime_magic.debug Off Off
mime_magic.magicfile /etc/httpd/conf/magic /etc/httpd/conf/magic
mysql
MySQL Support enabled
Active Persistent Links 0
Active Links 0
Client API version 5.0.18
MYSQL_MODULE_TYPE external
MYSQL_SOCKET /tmp/mysql.sock
MYSQL_INCLUDE -I/usr/include/mysql
MYSQL_LIBS -L/usr/lib -lmysqlclient
Directive Local Value Master Value
mysql.allow_persistent On On
mysql.connect_timeout 60 60
mysql.default_host no value no value
mysql.default_password no value no value
mysql.default_port no value no value
mysql.default_socket no value no value
mysql.default_user no value no value
mysql.max_links Unlimited Unlimited
mysql.max_persistent Unlimited Unlimited
mysql.trace_mode Off Off
openssl
OpenSSL support enabled
OpenSSL Version OpenSSL 0.9.7h 11 Oct 2005
pcre
PCRE (Perl Compatible Regular Expressions) Support enabled
PCRE Library Version 6.2 01-Aug-2005
posix
Revision $Revision: 1.70.2.1 $
session
Session Support enabled
Registered save handlers files user
Registered serializer handlers php php_binary
Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 On On
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 100 100
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.hash_bits_per_character 5 5
session.hash_function 0 0
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path /tmp /tmp
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies Off Off
session.use_trans_sid 0 0
shmop
shmop support enabled
SimpleXML
Simplexml support enabled
Revision $Revision: 1.151.2.7 $
Schema support enabled
sockets
Sockets Support enabled
SPL
SPL support enabled
Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RuntimeException, SimpleXMLIterator, SplFileObject, SplObjectStorage, UnderflowException, UnexpectedValueException
standard
Regex Library Bundled library enabled
Dynamic Library Support enabled
Path to sendmail /usr/sbin/sendmail -t -i
Directive Local Value Master Value
assert.active 1 1
assert.bail 0 0
assert.callback no value no value
assert.quiet_eval 0 0
assert.warning 1 1
auto_detect_line_endings 0 0
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.83 90.83
date.sunset_zenith 90.83 90.83
default_socket_timeout 60 60
safe_mode_allowed_env_vars PHP_ PHP_
safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset=
user_agent no value no value
tokenizer
Tokenizer Support enabled
xml
XML Support active
XML Namespace Support active
libxml2 Version 2.6.22
xsl
XSL enabled
libxslt Version 1.1.15
libxslt compiled against libxml Version 2.6.21
EXSLT enabled
libexslt Version 1.1.15
zlib
ZLib Support enabled
Stream Wrapper support compress.zlib://
Stream Filter support zlib.inflate, zlib.deflate
Compiled Version 1.2.3
Linked Version 1.2.3
Directive Local Value Master Value
zlib.output_compression Off Off
zlib.output_compression_level -1 -1
zlib.output_handler no value no value
Additional Modules
Module Name
sysvsem
sysvshm
Environment
Variable Value
CONSOLE /dev/console
TERM linux
LD_LIBRARY_PATH /usr/lib:
INIT_VERSION sysvinit-2.86
PATH /bin:/usr/bin:/sbin:/usr/sbin
RUNLEVEL 5
PWD /
PREVLEVEL N
SHLVL 3
HOME /
BOOT_IMAGE Arch-2.6.15
_ /usr/sbin/httpd
PHP Variables
Variable Value
_SERVER["HTTP_HOST"] laptop-do-joao.net
_SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
_SERVER["HTTP_ACCEPT"] text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
_SERVER["HTTP_ACCEPT_LANGUAGE"] en-us,en;q=0.5
_SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate
_SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.7
_SERVER["HTTP_KEEP_ALIVE"] 300
_SERVER["HTTP_CONNECTION"] keep-alive
_SERVER["PATH"] /bin:/usr/bin:/sbin:/usr/sbin
_SERVER["SERVER_SIGNATURE"] <address>Apache Server at laptop-do-joao.net Port 80</address>
_SERVER["SERVER_SOFTWARE"] Apache
_SERVER["SERVER_NAME"] laptop-do-joao.net
_SERVER["SERVER_ADDR"] 127.0.0.1
_SERVER["SERVER_PORT"] 80
_SERVER["REMOTE_ADDR"] 127.0.0.1
_SERVER["DOCUMENT_ROOT"] /home/httpd/html
_SERVER["SERVER_ADMIN"] [email protected]
_SERVER["SCRIPT_FILENAME"] /home/httpd/html/test.php
_SERVER["REMOTE_PORT"] 33973
_SERVER["GATEWAY_INTERFACE"] CGI/1.1
_SERVER["SERVER_PROTOCOL"] HTTP/1.1
_SERVER["REQUEST_METHOD"] GET
_SERVER["QUERY_STRING"] no value
_SERVER["REQUEST_URI"] /test.php
_SERVER["SCRIPT_NAME"] /test.php
_SERVER["PHP_SELF"] /test.php
_SERVER["REQUEST_TIME"] 1137274380
_SERVER["argv"]
Array
_SERVER["argc"] 0
_ENV["CONSOLE"] /dev/console
_ENV["TERM"] linux
_ENV["LD_LIBRARY_PATH"] /usr/lib:
_ENV["INIT_VERSION"] sysvinit-2.86
_ENV["PATH"] /bin:/usr/bin:/sbin:/usr/sbin
_ENV["RUNLEVEL"] 5
_ENV["PWD"] /
_ENV["PREVLEVEL"] N
_ENV["SHLVL"] 3
_ENV["HOME"] /
_ENV["BOOT_IMAGE"] Arch-2.6.15
_ENV["_"] /usr/sbin/httpd
PHP License
This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

Having a problem setting up apache...

Fisrt off, let me say this is my first stabe at this, so bear with me.
I set up apache, php and mysql, and pretty much successfully. I can connect to my web server via IP. But if I try to connect to it via the hostname it fails. I followed the directions in the wiki entry for it. Here are the contents of my /etc/hosts and /etc/rc.conf file as well as my /etc/httpd/httpd.conf file.
Can anyone tell me why my hostname isn't working?
/etc/hosts:
/etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 chxsrv chxsrv
# End of file
/etc/rc.conf
...(yada)...
# NETWORKING
HOSTNAME="chxsrv"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
...(blah)...
and last but not least, the /etc/httpd/conf/httpd.conf file:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo.log"
# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
# server as "@@ServerRoot@@//var/log/httpd/foo.log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.0.100:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User nobody
Group nobody
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName chxsrv:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/home/httpd/html"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/home/httpd/html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
<IfModule mod_php5.c>
DirectoryIndex index.php index.html
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
</IfModule>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/httpd/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#CustomLog /var/log/httpd/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
CustomLog /var/log/httpd/access_log combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#Alias /image/ "/home/httpd/images/"
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/cgisock
</IfModule>
# "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/home/httpd/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /etc/httpd/conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile /etc/httpd/conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the /etc/httpd/conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include /etc/httpd/conf/extra/httpd-mpm.conf
# Multi-language error messages
Include /etc/httpd/conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include /etc/httpd/conf/extra/httpd-autoindex.conf
# Language settings
Include /etc/httpd/conf/extra/httpd-languages.conf
# User home directories
Include /etc/httpd/conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include /etc/httpd/conf/extra/httpd-info.conf
# Virtual hosts
#Include /etc/httpd/conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include /etc/httpd/conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include /etc/httpd/conf/extra/httpd-dav.conf
# Various default settings
Include /etc/httpd/conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Like I said, I can connect to this from other machines on my network via IP, but not hostnames. Any thoughts?

I know this post is a couple months old but for future reference:
The problem is with /etc/hosts.allow
You need to add
httpd: ALL
Once you all that youll have external access to your apache setup.

JDeveloper problem setting up a database connection

I am having some problem setting up a connection to my database. Before I say any more let me explain what I need. I need 2 database connections 1 to a 10g R3 database and one to an 8.0.5.
I do realize that JDeveloper will only connect back to 8.1.7 because of the JDBC version that is installed with it.
What I really need to know is "Is it possible to define and use 2 different versions of JDBC" I really don't want to move back to the version that works with both because I am afraid of what performance/benefits I will lose from the latest and greatest.
The latest version that I can determine will work with 8.0.5 is the last version for 9i.
Any Ideas would be helpful.
The reason for this situation is that I have a production database that I will have to keep up with until the full version of the system is complete so that is why I even care about 8.0.5.
Thanks alot for your time,
Thom

I have a similar problem and I would much appreciate any help in this matter.
I have a wireless network set at home with two computers connected to it:
My workstation called Home-ws and my laptop called Acer. I can access the d:\ drive of my workstation from my laptop without any problem.
On my workstation I installed the Oracle 10g product and on my laptop I installed Oracle SQL Developer. On SQL developer I am trying to create a connection to the Oracle server:
My settings are as below:
Connection name: orcl_system
User name: system
Password: ******
Host name: Home-ws
Port: 1521
SID: orcl
When I push test I am getting the following error message:
Status: Failure –Io exception: The Network Adapter could not establish the connection
Are there any special settings that should be made set up a wireless connection to my database?
Then I did the following things below:
1. I downloaded from oracle.com the instantclient-basic-win32-10.2.0.2-20060508.zip file and unzipped it in a folder called instantclient_10_2. There were a number of DLL and two jar files plus sqlplus.exe
2. I started sqlplus from that server
3. sqlplus failed with a similar error as sql developer.
4. I checked for tnsping. There is no tnsping such and exe on my laptop. I looks like I have to install the DLLs I downloaded them but there are no instructions about how to install them. Should I just copy them in system32 folder?
5. I looked for firewalls on my Home-ws workstation (where my oracle server is installed) and on my Acer laptop. The firewalls were activated. I added on exception called oracle for port 1521 on both computers and tried to connect again. I tried with both TCP and UDP options and it did not work in both cases.
I am out of ideas. Any help would be much appreciated.
Thank you in advance for your help.
Julian

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

Problems setting up an NFS server

Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!

Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs.

Problems setting up VVSA 6.0 (lookup service adresse)

Hi,
I was happy to see VVSA 6.0 released, but i'm having problems setting it up. It keeps saying that the lookup service adresse is not reachable. But I have tried with the VVSA 5.5 and 5.5.1.1 and they work just fine with the lookup service adresse.
Anyone else having this issue?
Also trying to check for updates within the appliance failes since the repository is not online at vmware it seems.
Might not be ready for primetime (like ESXi6).

If Developer has a separate Oracle Home on your PC, then it has a separate TNSNAMES.ORA file that is uses to connect to the database. If you search for all tnsnames.ora files, you should find the one used by Developer 6.
Since Enterprise manager works, the tnsnames.ora in your Enterprise Manager's home will have an entry for your server database. You should be able to cut and paste this into the tnsnames.ora file used by Developer, or try copying the E.M. tnsnames.ora file directly.
John Alexander www.SummitSoftwareDesign.com

Problems Setting up NFS

Hi.
I've been having problems setting up NFS on a LAN at home. I've read through all the Arch NFS-related threads and looked at (and tried some of) the suggestions, but without success.
What I'm trying to do is set up an NFS share on a wireless laptop to copy one user's files from the laptop to a wired workstation. The laptop is running Libranet 2.8.1. The workstation is running Arch Linux with the most up-to-date (as of today) software, including NFS.
I have the portmap, nfslock, and nfsd daemons running via rc.conf, set to run in that order.
I've re-installed nfs-utils and set up hosts.deny as follows:
# /etc/hosts.deny
ALL: ALL
# End of file
and hosts.allow as follows:
# /etc/hosts.allow
ALL: 192.168.0.0/255.255.255.0
ALL: LOCAL
# End of file
In other words, I want to allow access on the machine to anything running locally or on the LAN.
I have the shared directories successfully exported from the laptop (192.168.0.3), but I have not been able to mount the exported directories on the workstation (192.168.0.2).
The mount command I'm using at the workstation:
mount -t nfs -o rsize=8192,wsize=8192 192.168.0.3:/exports /exports
There is an /exports directory on both machines at root with root permissions. There is an /etc/exports file on the NFS server machine that gives asynchronous read/write permissions to 192.168.0.2 for the /exports directory.
I receive the following message:
mount: RPC: Program not registered
This appears to be a hosts.allow/hosts.deny type problem, but I can't figure out what I need to do to make RPC work properly.
Some additional information, just in case it's helpful:
This is the result if running rpcinfo:
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32790 status
100024 1 tcp 32835 status
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32801 nlockmgr
100021 3 udp 32801 nlockmgr
100021 4 udp 32801 nlockmgr
100021 1 tcp 32849 nlockmgr
100021 3 tcp 32849 nlockmgr
100021 4 tcp 32849 nlockmgr
100005 3 udp 623 mountd
100005 3 tcp 626 mountd
Running ps shows that the following processes are running:
portmap
rpc.statd
nfsd
lockd
rpciod
rpc.mountd
Thanks for any help here!
Regards,
Win

Hi ravster.
Thanks for the suggestions. I had read the Arch NFS HowTo and did as you suggested get rcpinfo for the server machine. The Libranet NFS server is configured rather different since the NFS daemons are built into the default kernel.
Since I needed to complete the transfer immediately, I gave up for now trying to set up NFS and used netcat (!) instead to transfer the files from the Libranet laptop to the Arch workstation. The laptop will be converted to Arch Linux soon so I think I'll be able to clear things up soon. I haven't had any problems setting up NFS with homogeneous (i.e., all Arch or all Libranet) computer combinations.
Thanks again.
Win

Problems Setting up a Direct Debit

has anyone experienced any problems setting up a direct debit ??
I've been a BT customer for approximately 20 years and have had the same account number. I've moved house a few times and retained the same account. My last house move wasn't so successful as after moving in and having broadband re set up again... I received a letter in the post saying I had requested a "termination" and a parcel was included to send my router back etc... plus... I'd be charged £100+ for the disconnection...
Anyway I got on the phone to BT and the advisor appologised for the mix up... and suggested I cancel my direct debit with the bank to make sure the disconnection fee wasn't taken from my account.....
Ever since then... I have not being able to set up a direct debit online or by speaking with several BT helpdesk staff. I email BT asking for an explaination - NOTHING. BT helpdesk staff assure me that the direct debit will work this time and will contact me if there is a problem... again NOTHING. I even tried writing a letter to the head of customer services... I think the name Warren Buckley rings a bell.. Someone did email me back suggesting I use the online facility.... REALLY!! Do BT not have a fault tracking database of customer issues... so they can see I've already tried to set up the direct debit online...
Anyway ..... I've just noticed this forum now... so this is my latest attempt to see if anyone senior enough at BT will be embarrassed and try and sort out my account so I can start paying my bill using Direct Debit again... I'm pretty sure all that needs to happen is to be given a new account number or an account alias that can be sent to my bank. Otherwise... I'll just carry on waiting to receive the automated message from BT saying I haven't paid and then go and pay online... But I am worried one of these automated messages will arrive the day I go on a 2 week holiday and I find myself cut off when I get home... giving me more pain....
PLEASE HELP BT ;o)
regards
DaveB

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems setting up Time Machine using a network drive

I am having problems setting up TimeMachine on my Mac Mini to work with a WD MyBookLive network drive. The network drive came with a TimeMachineBackup shared folder preconfigured. When I first connected the drive to the router and turned on TimeMachine, the TimeMachineBackups appeared as an option when I did "Select Backup Disk" from TimeMachine Preferences.
I managed to successfully connect to the drive and start a backup running. However the backup hit a problem and I started getting an error that the "disk was already in use". I therefore tried to remove the disk to try and start again. Hoever when I now do go into "Select Backup Disk" from TimeMachine Preferences the shared folder on the drive no longer apperas and I only get the option to serach for an Time Capsule.
If I go into Finder, the MyBookLive shows up as a connected Device with all its shared folders showing (including the TimeMachineBackup folder) and my Mac is definitely connected to the drive. How do I get the Drive & TimeCapsuleBackup shared folder to reappear in TimeMachine Preferences so that I can select it as the destination for my backups?

Check around the forum, you are one of very very many. It doesn't matter what WD say, do you see a Certified by Apple notice on it?
Go here, most authoritative site about Time Machine you can find. http://pondini.org/OSX/Home.html
Specific info on Network Drives are here http://pondini.org/TM/2.html
Post back here and ask for Pondini if you need more.
You can also read some tales of woe here

Problems setting up WRT54G2 router

I'm having problems setting up my Linksys WRT54G2 router. I want my mac laptop (iBook G3 running OSX) to use a wireless connection, and the home computer (running Windows XP) to stay connected to the modem.
I originally tried to set up the router by connecting it via ethernet to my laptop (and by ethernet to the modem), and went into the 192.168.1.1 address to configure it. The internet works fine on my laptop when connected to the wireless by ethernet but it can't connect wirelessly (it has an original airport card fitted, at first I thought I might need to upgrade the firmware but I ran a software update and one didn't come up). I then realised that I would need to MAC clone from the PC, that is connected to the modem? I tried to do this today, but I couldn't access the 192.168.1.1 address from the PC. I have tried resetting the router, and disabling the firewall but still can't access it. This PC also has anti-virus software running too - could this be the problem, or am I setting it up wrong? Thanks.

If you are trying to Setup your Router with the setup disk, Then you can exit from the setup and configure your Router manually. Before you configure your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.....
You need to connect your Modem to Linksys Router on Internet Port and your Computer to Linksys Router on Port No.1.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Here are the Wireless Settings which you can set on your router, once done you can try connecting your MAC computer to your Wireless network and check if you are Online from MAC computer.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Error in setting permissions of file/directory /home/oracle/jre/1.1.8/LICENSE !

Error in setting permissions of file/directory /home/oracle/jre/1.1.8/LICENSE ! Installation problem of 9i databse on redhat 7.3!!I installed sun jdk 1.3 or jdk 1.1.8_v3 and created a link for /usr/local/java !

from root try this command
umask
umask must set at 0022 ... if your server not set at this number use this command
umask 0022

Flash profiling of memory after clearing cache of home-made rsl files

I have a question about the flash memory profiling tools.
Once I have completely loaded a swf file into my browser, complete with multiple home-made gigantic RSLs (not flex swzs), the memory footprint of my application is small; I have not instantiated any of the objects in the RSL files. However, as stated earlier, the RSLs are very big files; full of embedded assets.
If I clear my browser cache, those gigantic RSL files are deleted.
Then, when I use my flash app to create objects from the RSL, flash profiler shows my memory footprint increase. That makes sense; I just made some large objects.
But from where did flash load those objects?
I deleted the RSL files.
The flash profiler showed I was using hardly any memory, suggesting that the class files were not loaded into memory already.
Are the files kept in a secondary file cache? Is there a second memory cache? Can I profile its size?

1. No. and the main footprint of a bitmap is probably is per-instance so the instance cost is probably what you're interested in. Anything embedded is also a class and the first time you access the class the Class category should go up by a bit.
2. When your app requires an RSL, the SWF for the RSL is loaded into memory (in a buffer you can't see from the profiler), expanded and parsed (into even more memory that you can't see from the profiler). Then as you access classes from the RSL, the profiler should show growth in the Class, Object and Function. If you statically link just the code you need, the amount of memory to load the SWF and parse it will be smaller since it doesn't need space for classes you won't need, but after that it is the same. The advantage of the RSL is that most folks end up using 200K or more from the RSLs so that's a download cost you pay the first time you run the app. The Flex RSLs are pretty well deployed so your chances of having savings is pretty good. Private RSLs for your app will do no good unless there is another app on the same domain that uses the RSLs. See the modules presentation on my blog for more info
3. The profiler does not show System.totalMemory. Even that number isn't the whole measure. We're currently fans of PrivateBytes to measure total weight of the app. But it depends on what problem you're trying to solve.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Problem setting up RAID0 on ASUS p9x79Pro

I’m having problems setting up a RAID0 on my new p9x79pro build, and I think I’m following the right procedure, first time doing this and it’s not working, so I could really use some help.
I pre-installed the Intel drivers downloaded from ASUS prior to installing Windows 7 using the f6 method.
After installing, I ran the Intel rapid storage enterprise installer software, and the raid controller shows up in Device Manager.
I then followed the procedure in my mobo manual. I went into the bios, into advanced mode, changed my drives from ACHI to RAID mode, and then went into Ctrl I mode and tried to set up a raid. The two new WD 1 TB black caviars I have were visible, but greyed out and described as “non-raid disks”. When I went through the process, they remained greyed out, and I could not select any drives to raid, though I tried creating a RAID0 anyway.
These drives, both new, had already been partitioned. These drives are plugged into the top two sata 6gb ports on the mobo, which should be correct according to the manual.
When I rebooted, my drives were not visible, and as expected, there was no RAID0. I went back into BIOS, deleted the (nonexistent) raid, and reset the drives to ACHI, but the drives still did not show up.
So, thinking I screwed up somehow, I did a full reinstall of windows. After installing the Intel enterprise installer software, I went into device manager and the drives were back, but unpartioned. Before partitioning, I tried to RAID0 these again, using the above method, but no luck, still greyed out. I also made sure to let windows connect online to download any hotfixes, which it did. All my other drivers are up to date, as is BIOS. Before I partition these drives and try again, figured I’d ask here.
I think I’d be there, if only the drives were not greyed out. What am I doing wrong?
Also, if I were plugged into the bottom two drives (the Marvell controller, which show up in Device Manger, so it appears to have installed) how would I set up a RAID0?
Thanks

Something is off as the Intel SATA6G ports fully support raid. I would consider doing a write zeros on your drives and and retry creating on the Intel ports.
I complete a quick check on a P9X79 Pro without issues screen below for your reference.
Steps used ( already had OS install on single SSD ). Completed using UEFI defaults ( drive was installed under AHCI ).
Step 1. Connected 2 SSDs to the Intel SATA6G ports white ports not label SSD Caching ( which are the Marvell ports )
Step 2. Entered into the UEFI and changed to Raid
Step 3. Saved and reboot and entered into Raid Console ( Ctrl I ), Once enter created Raid 0 and defined 2 Corsair drives as drives to be used in Raid
Step 4. Rebooted and entered OS and install RST driver/application.
Included some screenshots including performance throughput of 2 SSDs on SATA6G ports which can only be achevied via Raid0 on Intel SATA6G ports.
One thing that was not clear is where is your OS present / installed and on which port?
Hopefully you will be able to get this sorted and resolved. Then again if you are ok running the Raid on the Marvell ports you are already solid.
Enjoy the rest of your day.

Problems setting up Wordpress + Cherokee on home made server

Similar Messages

Maybe you are looking for