Problems setting up VVSA 6.0 (lookup service adresse)

Hi,
I was happy to see VVSA 6.0 released, but i'm having problems setting it up. It keeps saying that the lookup service adresse is not reachable. But I have tried with the VVSA 5.5 and 5.5.1.1 and they work just fine with the lookup service adresse.
Anyone else having this issue?
Also trying to check for updates within the appliance failes since the repository is not online at vmware it seems.
Might not be ready for primetime (like ESXi6).

If Developer has a separate Oracle Home on your PC, then it has a separate TNSNAMES.ORA file that is uses to connect to the database. If you search for all tnsnames.ora files, you should find the one used by Developer 6.
Since Enterprise manager works, the tnsnames.ora in your Enterprise Manager's home will have an entry for your server database. You should be able to cut and paste this into the tnsnames.ora file used by Developer, or try copying the E.M. tnsnames.ora file directly.
John Alexander www.SummitSoftwareDesign.com

Similar Messages

Setting up Lightroom 4.3 Publishing Services

I am having a problem setting up Lightroom 4.3 Publishing Services. Each time I click “OK I’ll Authorise button in Flickr it goes to a blank screen with no completion of the process. After many attempts over the last couple of days, this morning I was able to get error message from flickr that says “Oops! Flickr doesn't recognise the "oauth_token" this application is trying to use.” And goes on to say “You don't really need to know what this means, except that you can't use the application until this problem is fixed. (It's a third-party problem, not a Flickr problem).
Will someone in Adobe please advise what I do to correct this problem? I have reached an extreme level of frustration over this, please help.
Thanks in advance.

Hi have solved the problem by uninstalling and reinstalling. I think the problem was because I upgraded from version 3.x to 4.1

Problems setting up email + understanding Pin and BB internet service

Hi,
I've been browsing for answers about my new black berry 9700.
When I try to set up my email on the phone it says. "Your email account is already activated for enterprise use."
I have no idea what that means.
I brought the Blackberry pretty much brand new, it was used for like a day.
the problem with that is I've never had a blackberry before and I don't know anything about setting up the email, blackberry internet service, enterprise, and the pin system.
Also, the other problem is that there are two icons for internet; Browser and WAP. I just want to connect to the internet via my wireless internet and not get charged, and want to know if I am getting charged.
Please help.

Shoulda done some reasearch first:
Using your WiFi router to connect to your 9700, you can use the WiFi hotspot browser ONLY to connect to the internet. You will NOT be able to use the RIM push email, Facebook app, BlackBerry Messenger, Maps, etc.
You MUST have the BlackBerry Data Plan on your service provider account for that.
Go to Options > Advanced > Browser and save that to HotSpot Browser.
Meanwhile, at Manage Connections, search for and connect to your WiFi router and you're set to go for the limited use you'll have.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Problems Setting up a Direct Debit

has anyone experienced any problems setting up a direct debit ??
I've been a BT customer for approximately 20 years and have had the same account number. I've moved house a few times and retained the same account. My last house move wasn't so successful as after moving in and having broadband re set up again... I received a letter in the post saying I had requested a "termination" and a parcel was included to send my router back etc... plus... I'd be charged £100+ for the disconnection...
Anyway I got on the phone to BT and the advisor appologised for the mix up... and suggested I cancel my direct debit with the bank to make sure the disconnection fee wasn't taken from my account.....
Ever since then... I have not being able to set up a direct debit online or by speaking with several BT helpdesk staff. I email BT asking for an explaination - NOTHING. BT helpdesk staff assure me that the direct debit will work this time and will contact me if there is a problem... again NOTHING. I even tried writing a letter to the head of customer services... I think the name Warren Buckley rings a bell.. Someone did email me back suggesting I use the online facility.... REALLY!! Do BT not have a fault tracking database of customer issues... so they can see I've already tried to set up the direct debit online...
Anyway ..... I've just noticed this forum now... so this is my latest attempt to see if anyone senior enough at BT will be embarrassed and try and sort out my account so I can start paying my bill using Direct Debit again... I'm pretty sure all that needs to happen is to be given a new account number or an account alias that can be sent to my bank. Otherwise... I'll just carry on waiting to receive the automated message from BT saying I haven't paid and then go and pay online... But I am worried one of these automated messages will arrive the day I go on a 2 week holiday and I find myself cut off when I get home... giving me more pain....
PLEASE HELP BT ;o)
regards
DaveB

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems setting up WRT54G2 router

I'm having problems setting up my Linksys WRT54G2 router. I want my mac laptop (iBook G3 running OSX) to use a wireless connection, and the home computer (running Windows XP) to stay connected to the modem.
I originally tried to set up the router by connecting it via ethernet to my laptop (and by ethernet to the modem), and went into the 192.168.1.1 address to configure it. The internet works fine on my laptop when connected to the wireless by ethernet but it can't connect wirelessly (it has an original airport card fitted, at first I thought I might need to upgrade the firmware but I ran a software update and one didn't come up). I then realised that I would need to MAC clone from the PC, that is connected to the modem? I tried to do this today, but I couldn't access the 192.168.1.1 address from the PC. I have tried resetting the router, and disabling the firewall but still can't access it. This PC also has anti-virus software running too - could this be the problem, or am I setting it up wrong? Thanks.

If you are trying to Setup your Router with the setup disk, Then you can exit from the setup and configure your Router manually. Before you configure your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.....
You need to connect your Modem to Linksys Router on Internet Port and your Computer to Linksys Router on Port No.1.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Here are the Wireless Settings which you can set on your router, once done you can try connecting your MAC computer to your Wireless network and check if you are Online from MAC computer.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Problem setting up WDS with MSI RG54GS2 & Motorola WR850g

Problem setting up WDS with WR850g & MSI RG54GS2
Hi,
I'm trying to bridge 2 routers: Motorola WR850g & MSI RG54GS2 .
I set the MSI as the main router (it works better for me as a router than the Moto), and the Moto is the repeater. I have set it up exactly as the guide on Broadbandreports.com for the Motorola , and on Tom's Networking http://www.tomsnetworking.com/2004/04/14/how_to_wds_bridge/
The Moto sees the MAC of the MSI (Status is UP), the MSI doesn't have a page that shows WDS MACs . I know the routers are connected because when I connect a laptop to the Moto wireless network, it gets an IP (and the DHCP on the Moto is disabled) and the default gateway of the connection is the IP of the main (MSI) router.
The problem is I can't surf anywhere. I can't even ping the MSI router - which should be possible if the WDS works properly.The Moto Wireless Bridge Operation is set properly to Access Point/Wireless Bridge .
Can anyone solve this?
Thanks.

David, welcome to the discussions.
Are you refering to Airport Extreme Setup as the Extreme base.
Or are you using a 3rd party Router as your primary Base, or the Express as the primary base.
Read the supplied link, Not all 3rd party routers are WDS compatible.
http://discussions.apple.com/thread.jspa?messageID=2785566
Who is you Internet Service Provider?
What brand and Model Modem did they furnish?
Are you using Dial-Up...DSL...or Cable?
http://docs.info.apple.com/article.html?artnum=303595
See if there is any help from this link.
http://discussions.apple.com/thread.jspa?messageID=607414
Cheers Don

Problems with deep request structure in web service

I'm having problems when trying to consume an Enterprise Service-like web service in my Web Dynpro application. The web service FindXByElements has a request-structure as follows:
XByElementsQuery
-ProcessingConditions
-QueryHitsMaximumNumberValue
-QueryHitsUnlimitedIndicator
-XSelectionByElements
-ID
-Year
Regarding the structures on level two, the structure ProcessingConditions are of the global data type "WITHOUT_LASTRETURNED_QueryProcessingConditions" and are therefore typed. The structure XSelectionByElements on the other hand are just a "level" in the request structure and are therefore not typed. Both structures have occurrence 1 so they have to be filled with input data.
The code in wdDoInit in the Component Controller looks like this:
QueryXInModel model = new QueryXInModel();
wdContext.nodeRequest_FindXByElements().bind(wdContext.createRequest_FindXByElementsElement(new Request_FindXByElements(model)));
wdContext.currentRequest_FindXByElementsElement().modelObject().setXByElementsQuery(new XByElementsQuery_Sync(model));
//Processing structure
wdContext.currentXByElementsQueryElement().modelObject().setProcessingConditions(new WITHOUT_LASTRETURNED_QueryProcessingConditions(model));
//Selection structure
wdContext.currentXByElementsQueryElement().modelObject().setXSelectionByElements(new XSelectionByElements(model));
The last row generates the following exception:
java.lang.IllegalArgumentException: Cannot perform write operation 'setRelatedModelObject' on target role: Class 'XSelectionByElements' is not compatible to class '$002fWsdlDefinitions$002fWsdlTypes$002fXsdSchema$002fXsdComplexType$005b3$005d$002fXsdSequence$002fXsdElement$005b2$005d$002fXsdComplexType' of target role 'XSelectionByElements' in model class 'XByElementsQuery_Sync'
There seems to be a problem to bind a non-typed structure element to a context node since the processing structure is working fine but the selection structure are not.
What am I doing wrong, anyone got any clues?
/Oskar

Hi
QueryXInModel model = new QueryXInModel();
wdContext.nodeRequest_FindXByElements().bind(wdContext.createRequest_FindXByElementsElement(new Request_FindXByElements(model)));
wdContext.currentRequest_FindXByElementsElement().modelObject().setXByElementsQuery(new XByElementsQuery_Sync(model));
//Processing structure
wdContext.currentXByElementsQueryElement().modelObject().setProcessingConditions(new WITHOUT_LASTRETURNED_QueryProcessingConditions(model));
//Selection structure
wdContext.currentXByElementsQueryElement().modelObject().setXSelectionByElements(new XSelectionByElements(model));
XByElementsQuery
ProcessingConditions
QueryHitsMaximumNumberValue
QueryHitsUnlimitedIndicator
XSelectionByElements
ID
Year
as
          QueryXInModel model = new QueryXInModel();
           Request_FindXByElement request = new Requst_FindXByElement();
            ProcessCondition   processCond = new ProcessCondition(model);
            QueryHitsMaximumNumberValue qhMaxNumValues = QueryHitsMaximumNumberValue(model);
      QueryHitsUnlimitedIndicator qhUnLimind = new QueryHitsUnlimitedIndicator(model);
        XSelectionByElements selecByEle = new XSelectionByElements(model);
                 processCond.set....();
                 qhMaxNumValues .set...();
           and so on
                request.set....();
wdcontext.nodeReqestFindX..bind(request);
in the above during the values you will automatically get the set values .

How to remove registration form lookup service form jini

hello friend
suppose i have register a particular service to Lookup service in jini , and after some time i want to remove the registration of that service from look up service
can any one help me
plz its urgent for my project

thanks a lot
if i get any other problem about jini how I can contact you

Can not set remote error true in reporting service's properties's advanced

can not set remote error true in reporting service's properties's advanced
美斯: 唔理幾多個皇上啦, 個波呢家係皇上果度!!!

Hello,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Are you get some error messages when you set EnableRemoteErrors to true? Or do you mean that it doesn’t
throw error message to us, but the property is useless? And could you tell me the edition of your SQL Server?
It is benefit for us to do further analysis. Thank you for your understanding.
The following document may help you:
http://technet.microsoft.com/en-us/library/aa337165(v=sql.110).aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problem setting up Gmail on KIN TWOm

Very happy with my KIN TWOm - got my Zune setup, go to set up my Hotmail, perfect...but they I try to set up Gmail and it says "Not Set Up - There was a problem setting up your account. Try again later". When I call Verizon they tell me, "You must be typing in the wrong email or the wrong password." It's been the same email for the last 5 years and I check it everyday - I think I've got it down. When I kept complaining, they sent me to ADVANCED TECH SUPPORT were I was told to pull the battery out and restart the phone...when that did nothing I was told to change my Gmail password. I wasn't surprised when that didn't work. After all this I was told I should contact Gmail because it sounds like a problem on their end. Here's the issue; they didn't make the phone, why would they know how to help? The KIN website is no more - no help to be found with Sharp or Microsoft, so I guess this is my last chance - Anyone had the same issue, if so how can I fix it?

You should not need to enable IMAP/POP to use your gmail account w/ the Kin. I personally use gmail, so it is the only email service i can verify works fine with the Kin email app. First, make sure you have an internet connection. That can be wifi, or the 3g network (i would suggest wifi; block 3G is my advice). Once you are sure you have a connection (try connecting to a few pages in the browser; don't rely on the little 3G icon), click on the email app icon, then click the Gmail icon. It will ask for 3 options: a name (i'm not sure if this has to match your email account's name, character for character; but i know mine does, so you might as well enter it as the same name as the one under your gmail account just in case), the email address (including @gmail.com), and your password, which is case-sensitive, has to include all the symbols/numbers, etc.
It should be as easy as that. The only problem i can see occurring is if your phone isn't actually connected to a wifi connection and has no connection to the internet, or if it does matter that the name you enter has to match the email account's name, but i don't understand why it would have to match, but then again it wouldn't be the first time Microsoft did something unexplainably weird.

Problems setting up username & password for SQL

Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
     String username = "" , password = "";
     public static void main(String[] arguments) {
          PassDB UPass = new PassDB();
          String data = "jdbc:odbc:JavaTestDataBase";
          try {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
               Statement st = conn.createStatement();
               ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
          catch (SQLException s) {
               System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
          catch (Exception e) {
               System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     String username = "", password = "";
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          username = uname.getText();
          password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
                ^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
                    "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                    + "WHERE (Title='Mr') ORDER BY ContactID");
               ResultSet rec2 = st.executeQuery(
                    "SELECT Subject, ContactID FROM Calls "
                    + "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]

This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
     static String username = "" ;
     static String password = "" ;
     public static void main(String[] arguments) {
     PassDB UPass = new PassDB();
     String data = "jdbc:odbc:JavaTestDataBase";
     try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
          Statement st = conn.createStatement();
          ResultSet rec = st.executeQuery(
          "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
          + "WHERE (Title='Mr') ORDER BY ContactID");
          /*     ResultSet rec2 = st.executeQuery(
               "SELECT Subject, ContactID FROM Calls "
               + "WHERE (Subject Is Not Null) ORDER BY ContactID");
          System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
          while(rec.next()) {
               System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
          st.close();
     catch (SQLException s) {
          System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
     catch (Exception e) {
          System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
     static boolean getOut = false;
     JTextField uname = new JTextField(10);
     JTextField pword = new JTextField(10);
     // JPasswordField pword = new JTextField(10);
     public PassDB() {
          super("duBe's database logon");
          setSize(220, 160);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          JLabel unameLabel = new JLabel ("Username: ");
          JLabel pwordLabel = new JLabel ("Password: ");
          JButton submit = new JButton("OK");
          submit.addActionListener(this);
          pane.add(unameLabel);
          pane.add(uname);
          pane.add(pwordLabel);
          pane.add(pword);
          pane.add(submit);
          setContentPane(pane);
          while(getOut == false)
               setVisible(true);
     public void actionPerformed(ActionEvent evt) {
          PassDB clicked = (PassDB)evt.getSource();
          DBQuery.username = uname.getText();
          DBQuery.password = pword.getText();
          getOut = true;
}          Any advice is greatly appreciated
duBe

Problems setting up an NFS server

Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!

Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs.

Problems setting up static routing

HI
I'm having a problem setting up static routing. I keep getting the message "invalid static route". I have an E1550 router and my frimware is up to date. I have tried a few different gateway addresses ie 192.168.1.1, 127.0.0.1 and my router's address on the net, but I keep getting the same message. Has anyone else had this problem and been able to fix it?

I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

Problems setting up VVSA 6.0 (lookup service adresse)

Similar Messages

Maybe you are looking for