Problems to display a 2nd window using multithreading

I would like to know how is it possible to display a second window where I can enter a text while the main window continue to display on a graph acquired data - Thank you very much in advance

> I would like to know how is it possible to display a second window
> where I can enter a text while the main window continue to display on
> a graph acquired data - Thank you very much in advance
There are two ways to get parallel execution. You can use the VI
Server's Run method to pretty much push the Run button of the VI. This
isn't the same as a subVI call because it runs in parallel and doesn't
need to complete before the Run method node returns.
Another way of doing this is to put the code in parallel and don't put
them in a loop that has to wait for both to finish.
Greg McKaskle

Similar Messages

  • Problem in displaying Alv grid output  using oops........

    hi,
    i have two problems in displaying ALV grid output Using Oops.
    1) How to modify the fieldcatalog after we getting a field catalog using general FM.
    2) initialy it is displaying 13 fields but there are 63 fields .
       eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count  of displayed fileds are same . how can display 63 fields at a time .

    Hi,
    You can chnage using below code:
    loop at gt_fieldcat.
    if <gt_fieldcat-field_name> = 'FIELDNAME'.
    endif.
    modify gt_fieldcat.
    clear gt_fieldcat.
    endloop.
    Make sure that all the field should not have no_out = 'X' and tech = 'X'.
    Thanks,
    Sriram Ponna.

  • Problem in displaying customized flex window.

    0
    Hi I've created a customized settings sub-window, with an AIR application and facing a problem in displaying it more than one time from the application, i.e for the first time i select option from context menu then the settings window is displayed but if i try for the second time it doesn't come again. The code is attached for the called function where 'toastWindow_2' is the refrence for customized settings window:
    public function showOptionwindow(event:ContextMenuEvent):void
                    var check_label:String = event.currentTarget.label;
                    var toastWindow_2:options_db = new options_db();
                    toastWindow_2.open();
                    if (check_label=='List videos'){
                toastWindow_2.settings_windowtab.selectedIndex=1;
                    else if (check_label=='Feedback'){
                toastWindow_2.settings_windowtab.selectedIndex=2;
                    else if(check_label=='Settings'){
                toastWindow_2.settings_windowtab.selectedIndex=0;
    Please suggest the solution asap; Thanks in advance.

    Hi there,
    A fast suggestion would be to use the debugger and see what's happening. Note down the stuff that is changed when you first click the button and the window opens and see if the stuff is the same the second time ( or if the method is even triggered ). In such situations, the debugger is your best friend.
    With best regards,
    Barna Biro
    Blog: http://blog.wisebisoft.com

  • Re:Problem in displaying the output by using filters

    hi to all,
    when using filters in ALV i am getting a problem of displaying the <b>full contents of a particular field while going for F4 option</b>.
    even i using <b>ls_fieldcat-outputlen = field length</b> it is not coming .
    please help me in this issue.
    thanks
    sun
    Message was edited by: sun deep

    Hello,
    set ST_FIELDCAT-OUTPUTLEN to the actual lenght of the field.
    regards,
    Naimesh

  • Problems with displaying tables from windows software in Powerpoint

    I have been having some problems with powerpoint presentations that include tables from specific windows software. These tables were produced with the software package called SPSS for windows. The font that's used for these tables is Tahoma. The powerpoint presentations were made on a windows operated computer where the tables were pasted into the slides as pictures.
    When opening these presentations on my MacBook these tables are presented in a way that is impossible to read. The tables are mostly empty while some unclear symbols are inconsitently divided over the table. The original table existed out of a combination between text in the first row and collom and numbers in the other cells.
    Has anybody had any experience with this problem or something similar? Any suggestions on what to look for when trying to solve this problem?
    Thanks in advance!!
    Regards.
    Jochem

    Depending on the software you use to display the presentation on your Mac I suggest posting your request either here
    http://discussions.apple.com/forum.jspa?forumID=1191
    or here
    http://discussions.apple.com/forum.jspa?forumID=774
    If you are using a non-Apple-software (e.g. NeoOffice or OpenOffice) I suggest the support forums for the specific product you use.
    You will hopefully get more helpful answers in these forums as you would get here, as this issue is not a Windows/Mac OS X compatibility issue but a Powerpoint compatibility issue.

  • Problem while displaying popup message while using inputfile component

    Hi
    I am using JDEV 11.1.1.2.0, using ADF i developed and application
    in my page i have a input file component, from which i am taking a csv file and reading it through valuechangeevent of inputfile component. I have used myfaces.trinidad-UploadedFile to get the selected file and read it using inputstream.
    I have put some validation check (validation check is done while reading the file using valuechangeevent of the inputfile component), while reading the file and incase i receive any error (validation mismatch), the reading of file stops ... and before doing that i used to display error message using below method:-
    public String ValidationCheck(String attrname, String attrvalue, int rownumber) {
    String msg="Validation error found in "+attrname+" with value "+attrvalue+" of row "+rownumber+" in the file. Please correct the file and retry/";
    FacesContext ctx = getFacesContext();
    FacesMessage fm = new FacesMessage(FacesMessage.SEVERITY_ERROR, msg, "");
    ctx.addMessage(null,fm);
    return null;
    i have used the same method to display message in other places where its showing correctly but fails in inputfile component.
    Please help me out how can display messages from inputfile component??
    Thanks
    Sudeep
    Edited by: SKD on Feb 21, 2012 12:02 PM
    Edited by: SKD on Feb 21, 2012 4:08 PM
    Edited by: SKD on Feb 21, 2012 4:11 PM

    It works fine for me (albeit on 11.1.2.1). Here is my complete test case:
    FileUploadTest.jspx:
    <?xml version='1.0' encoding='UTF-8'?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="FileUploadTest.jsf" id="d1">
        <af:form id="f1" usesUpload="true">
          <af:inputFile label="Label 1" id="if1" valueChangeListener="#{TestBean.vcl}"/>
          <af:commandButton text="commandButton 1" id="cb1"/>
        </af:form>
        <af:messages id="m1"/>
      </af:document>
    </f:view>TestBean.java:
    package view;
    import javax.faces.application.FacesMessage;
    import javax.faces.context.FacesContext;
    import javax.faces.event.ValueChangeEvent;
    import oracle.adf.share.logging.ADFLogger;
    public class TestBean
      private static final ADFLogger _LOG = ADFLogger.createADFLogger("view.TestBean");
      public TestBean()
      public void vcl(ValueChangeEvent valueChangeEvent)
        _LOG.severe("in the value change event");
        FacesContext ctx = FacesContext.getCurrentInstance();
        FacesMessage fm = new FacesMessage(FacesMessage.SEVERITY_ERROR, "This is a message", "Message");
        ctx.addMessage(null, fm);
    }adfc-config.xml:
    <?xml version="1.0" encoding="windows-1252" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
      <managed-bean id="__1">
        <managed-bean-name>TestBean</managed-bean-name>
        <managed-bean-class>view.TestBean</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
      </managed-bean>
    </adfc-config>John

  • Problem while displaying data in spool using oops alv

    Hi,
    I have created a oops alv, in which iam displaying 2 ALV's  on 2 containers..
    Iam able to display the data which i need when i execute the program in foreground , But when i execute the program in background iam not able to see the 2nd ALV in the spool....
    The ALV displays one below the other.
    How i can i correct it..?
    Vishwa

    Hi,
    The container created in ALV will work only in foreground as this is the framework the background cannnot initiate the container object and assign the ALV to the container.
    Hence you cannot create the container object and assign the same to the ALV screen in background. Instead you need to use the factory method/ALV FM to display in background mode.
    For background ALV processing, don't use OOPS! U can use this fm : REUSE_ALV_GRID_DISPLAY.
    You can also refer below threads:
    Re: ALV: Foreground Vs Background
    Re: OO ALV in background job
    Regards
    Shiva

  • Problem in Display the Crystal report using Crystal report Viewer 2008

    Hi All,
    I have developed crystal web project with crystal report using Eclipse IDE. when I deploy this web application using Tomcat server 6.0 in Windows xp, Windows Vista.. It is working fine..
    But When I deploy it into Windows 2000 server ,  I am not able to see Last 2 columns of the report page in the Viewer.
    But When I tried to Export as Excel, I got all the datas in the Report and also when I preview the report in Eclispe IDE using crystal viewer plugin it is working fine in Windows 2000 server also..
    Thanks in Advance for your help..
    Regards,
    SathiyaMBPS

    Windows 2000 is not supported in current versions of CR. Check the platforms PDF file.

  • Problem in displaying multiple column values using Narrative View

    Hi All,
    I have a requirement where in I need to display column 1 of an Answers report as a header and all values of column 2 below tht.
    There are multiple values from column 2 for every value in column 1
    Example:
    Group:
    Grp (This is column 1)
    Activity:
    Act1
    Act2
    Act3 (These are values from column 2)
    I have used narrative view for this which looks like:
    Group: @1
    Activity:@2[br/]
    But this displays the value of column1 along with every value of column 2. I want column 1 value to be displayed only once.
    Thanks in advance
    Radhika

    Hi see this link it may helpful
    Re: Narrative view not showing up in the report
    Re: how to transpose columns to rows in OBIEE
    Regards
    Naresh

  • Problem with displaying BLOB images on JSP page using a servlet

    hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
    Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
    here is one of my image servlet's working versions (the essential part of it) :
                   BLOB blob=null;
              rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
              while (rset.next())
                   blob=((OracleResultSet)rset).getBLOB(2);
              response.reset();
              response.setContentType("image/jpeg");
              response.addHeader("Content-Disposition","filename=42.jpeg");
                    ServletOutputStream ostr=response.getOutputStream();
                   InputStream istr=blob.getBinaryStream(1L);
                    int size=blob.getBufferSize();
              int len=-1;
                    byte[] buff = new byte[size];
                         while ((len=istr.read( buff ))!=-1 ) {
                   ostr.write(buff,0,len);
             response.flushBuffer();
             ostr.close(); and my JSP page code :
    <img src="/ImageServlet" border="0"  > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

    I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
    here's the magic tag : <img src="ImageJSP.jsp" border="0"  > enjoy : )

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • Problem while displaying Purchase order using me9f

    Hi All,
    I have copied ME9F as ZME9F, and SAPFM06P as ZSAPFM06P (print program of purchase order). Now when I display the PO using ME23n, there is no problem and PO is getting displayed absolutely fine. But When I display the same PO using ZME9F, the vendor address in the PO is getting printed at the item level instead of header level.
    The vendor address should be displayed at the top and not at the item level.
    When I analysed the code, I found in case of ZME9F AND ME23N, the values of NAST structure and ENT_SCREEN are different. These values are passed as input values to the Function Module ME_READ_PO_FOR_PRINTING.
    Please let me know how do I fix this issue, such that vendor address is displayed at the header level instaed of item level.
    Thanks !!!

    Hi,
    First you creat a PO using BAPI_PO_CREATE , once PO is created then you use the FM BAPI_PO_CHANGE and update the condtions in PO. See the code below given.
    Fm lt_cond-condition_no = lvc_knumv.
    lt_cond-itm_number = gt_output-ebelp.
    lt_cond-cond_type = 'FRB1'.
    lt_cond-cond_st_no = '020'.
    lt_condx-condition_no = lvc_knumv.
    lt_condx-itm_number = gt_output-ebelp.
    lt_condx-itm_numberx = 'X'.
    lt_condx-cond_st_no = lt_cond-cond_st_no.
    lt_condx-cond_st_nox = 'X'.
    lt_condx-cond_type = 'X'.
    lt_cond-cond_value = gt_output-frcst.
    lt_condx-cond_value = 'X'.
    lt_cond-currency = p_cndcur.
    lt_condx-currency = 'X'.
    lt_cond-vendor_no = gt_output-frvndr.
    lt_condx-vendor_no = 'X'.
    lt_cond-change_id = 'I'.
    lt_condx-change_id = 'X'.
    APPEND lt_cond.
    APPEND lt_condx.
    CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
    purchaseorder = gt_output-ebeln
    TABLES
    return = lt_return
    * poitem = lt_poitem
    * poitemx = lt_poitemx
    pocond = lt_cond
    pocondx = lt_condx.
    Thanks.

  • Problem in displaying a field in webdynpro using Adaptive RFC model

    HI,
    I created a webdynpro application using adaptive RFC model and i have a problem in displaying one of the output fields.
    When i execute the function module it is giving the exact value for my output field in this case telephone number (of type STEXT which is char with length 40).But when i am trying to display that telephone number in webdynpro application it is taking only first 4 digits.
    i deleted the model and recreated it still it doesnot work.
    please let me know how to resolve it.
    points will be awarded for sure
    Bala

    Hi Bala,
    Whenever you reimport the model server restart is necessary otherwise the changes will not get reflected. You will get an error when you deploy the application.There is no go around except restarting the server as the meta data gets cached in the server as long as the server is runnig.So, Once you restart the server the cache will be cleared.
    Check once again whether you are fetching data from correct BAPI field. Still problem persist try debugging.
    Regards, Suresh KB

  • Displaying Mirosoft window  using S- bus with bootcamp

    Running Microsoft window using s-bus all I get is a black screen, but it works well with mac os. Will try posting this also in bootcamp. I have a vga for window, but do not want to be switching cables all the time and stand a chance of damaging the conections.
    mac mini   Mac OS X (10.4.6)  

    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???"
    Sorry there's a mistake in the sentence!
    i mean:
    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 7???"

Maybe you are looking for