Problems whit video size

Hello again!
Ok am not going to drift in lines this time so am just going to the point right away..... I was able to construct a video player subvi in such a way that I don't really need flags and stuff (you know as simple as possible).... I want to use it to play videos in a single size and my problem is that am not able to keep the video player in a fix size the player insist in changing size to accommodate the video is playing ... ok to be more clear about it lets say I want to keep the size of the video player in 888 for the width and 540 for the height ... I wasn't able to attach one of the videos am using is says is to big for it sorry
Really appreciate assistance here !!!
W@R
Attachments:
video con size acomodado.vi ‏27 KB

Ok maybe am phrasing the question in a wrong way.... what I want to say is:
I know who to set a size to the ActiveX control of the WMP by using the "bounds" property node I set the size at let's say 604 for height and 750 for width now if you run the vi that I have attach you only need to add the "bounds" property node in the event case or the block diagram, either way works, for it to set the size of the WMP...... then when you load a video the WMP take the size of the video that is playing at the time.... Ex, video size 430 height and 550 width... that would be the viewing size... I don't want that I want to force the WMP activeX control to maintain a specific size and not change regardless of the video's original size ...... please please help me if you can

Similar Messages

DVD Studio Pro - Problem with video size

Hello all,
I'm having a problem with dvd studio pro.
I have a project that I edited in FCP, then compressed to the default DVD setting in compresser, then imported the video as an asset in DVD studio pro. I'm trying to create a SD dvd, and whenever I simulate the dvd, the video plays with some of the left side cropped out. I have text that is cut off because of it. This has never happened before, and I have checked again and again to make sure its all set on SD. I'm pretty new to fcp studio, i'm teaching myself as I go and this is driving me crazy. I have made a bunch of dvd's prior, and this has never happened, so I have no idea what I did to mess things up.
For all I know, the problem may not even have to do with dvd studio, it may be in compresser. I have also played around with that, to no avail.
Thanks for the help!
Thomas

Thanks Javabob,
That is a way good idea. While trying your suggestion i stumbled upon the problem, I have no idea why i never noticed this before. When i got to the step of importing it as an asset into dvd studio, i clicked on the video track and the inspector box for it showed up, then i noticed it had a display mode drop down menu set on '16:9' pan-scan. I then changed it to 16:9 letter-box and the simulation video fits correctly onto the screen. I don't really understand the reason why pan-scan blew it up like that, but it is fixed now. I still don't recall ever having to do this before, but oh well. I will pay attention to the inspector window for the videos more carefully from now on.
Thanks for the help Javabob!

Hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image

hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image.
what can a i do?
the firefox is apdated.
thank you

Thank you for the update, the fix will be in the release version of Firefox on 2015-02-24.
In the mean time if you want to continue using Firefox beta our Sync service may be helpful getting your Firefox release data into Firefox beta. https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

Join video with diferent video size

Hi, I have this problem, I use QuickTime Pro to join clips in one large/single Mp4 file, some clips have diferent video size and when you join them a white space appears in the video, this example is from ''Peter Ganriel - Play The Videos: http://www.vendocasalasaguilas.com/QuickTime.JPG
What I need is how to center the video and dissapear or convert the white space in black space
Anothe question: when I play a Mp4 in QuickTime in MAC and then the same Mp4 in PC I see a lot of diferent in video quality, in MAC is much better the video quality, my question is there something to do to improve the video quality in PC or not.
Thanks in advance

Open the Movie Properties window and single click on a video track to highlight.
In the lower half of the window click the "Visual Settings" tab.
This is where you adjust dimensions, offset and track layers. Make either one track smaller or the other larger to help "align" them.
Default add uses an offset of 0,0 (upper left).

Using a function to change Netstream video size.

Hi folks,
forgive me I am new to script in Flex. I got an Application that has two scripted functions. The first is called at creationComplete and sets up a netconnect/netstream video playback. And a second that is fired when a button is clicked, which sets the application to Full Screen. What I want to do is resize the video at the same time. For testing purpose I am using hard coded values that match my monitor size.
The problem I am having is that the code I wrote to change the video size spits out an error "1120: Access of undefined property vid." - Is it possible to have one function access the vairibles of another function?
My code:
<mx:Script>
        <![CDATA[
            private function initApp():void
                var nc:NetConnection = new NetConnection();
                nc.connect(null);
                var ns:NetStream = new NetStream(nc);
                ns.addEventListener(AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);
                ns.addEventListener(DRMAuthenticateEvent.DRM_AUTHENTICATE, DRMAuthHandler);
                ns.play("gm.f4v");
                function asyncErrorHandler(event:AsyncErrorEvent):void
                    // ignore error
                var vid:Video = new Video();
                vid.attachNetStream(ns);
                vidUI.addChild(vid);
                vid.width=851;
                vid.height=480;
                function DRMAuthHandler(event:DRMAuthenticateEvent):void
                    ns.setDRMAuthenticationCredentials("test","test","drm");
            public function goFull():void
                stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
                vid.width=1920;
                vid.height=1080;
        ]]>
    </mx:Script>
I want the function goFull to change the video size that is loaded from the initApp function.... possible?
Cheers!
Chris

altering size of text already in a textfield:
var fmt:TextFormat = new TextFormat();
fmt.size = newvalue;
textfield.setTextFormat(fmt)
textfield.defaultTextFormat = fmt; // ensure that text typed after the change is same size

Final Cut Pro X Exported Video Size

I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube. I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube. There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove. I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video. Is there any reason why it does this or any way to get it to export at the correct display size?

How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720. I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock. I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length. I used the export media function and the resulting file was about 8GB in size! iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media. Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

Maximum Video Size in Flash??

Hello,
I'm currently working on a website design. The idea is a big chromakeyed interactive video in Flash. The size of the video is 1080 (width) x 1500 (height) pixels.
I've exported the video in After Effects with the standard settings for flash (File>Export>Adobe Flash Player(SWF)). Now when I import the video in Flash and preview the file, the video plays in a slower speed and it's not playing smooth at all...
Is the video too big? Is there a maximum video-size to keep the video running correct in Flash? Is it something else that causes this problem..???
I hope one of you guys can help me with this, hope to hear from you soon!

Could be a mismatch of frame rates. For example, if you are using 30 fps in AE and 24 in Flash, and then you embed the video into the time line, it will play at 24 fps, slow and jerky.
However if the video file was a .flv and you played the video by NetStream or FLVPlayback, it would playback at 30 fps, even if the Flash doc had a fps of 24.
If that doesn't fix it, try exporting the file from AE as an flv.
Best wishes,
Adninjastrator

I have a big problem whit my mac pro early 2008 can u help me please.

Hi my name is walter hernandez i have a big problem whit my mac pro early 2008
this is a message from my mac.
Interval Since Last Panic Report: 1151724 sec
Panics Since Last Report:          3
Anonymous UUID:                    ECF28484-9BA1-43C5-B7CF-70087794A780
Fri Aug 24 09:00:27 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00279ece, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0xff000014, CR3: 0x522e2000, CR4: 0x00000660
EAX: 0x0bccc43c, EBX: 0xff000000, ECX: 0x08eb8b7c, EDX: 0x0330c3e8
CR2: 0xff000014, EBP: 0x6115bde8, ESI: 0x001fb000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x00279ece, CS: 0x00000008, DS: 0x03350010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x6115bbd8 : 0x21b837 (0x5dd7fc 0x6115bc0c 0x223ce1 0x0)
0x6115bc28 : 0x2abf6a (0x59e3d0 0x279ece 0xe 0x59e59a)
0x6115bd08 : 0x2a1a78 (0x6115bd20 0x1 0x6115bde8 0x279ece)
0x6115bd18 : 0x279ece (0xe 0x2c970048 0x61150010 0x10)
0x6115bde8 : 0x258575 (0xbccc43c 0x1fb000 0x0 0x1)
0x6115bf38 : 0x2ab83c (0x8c35ebc 0x709fb000 0x7fff 0x1)
0x6115bfc8 : 0x2a18da (0x85a04c4 0x0 0x10 0x85a04c4)
BSD process name corresponding to current thread: automount
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 1217906594287
unloaded kexts:
com.apple.driver.AppleFileSystemDriver          2.0 (addr 0xd71000, size 0x12288) - last unloaded 473939257675
loaded kexts:
com.Bella-USA.DVKeyboard.driver          3.2
at.obdev.nke.LittleSnitch          2.5.1
com.apple.filesystems.autofs          2.1.0 - last loaded 390587246978
com.apple.driver.IOBluetoothBNEPDriver          2.4.5f3
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleHDA          2.0.5f14
com.apple.kext.ATIFramebuffer          6.3.6
com.apple.driver.AudioAUUC          1.57
com.apple.ATIRadeonX2000          6.3.6
com.apple.driver.AppleUSBDisplays          289
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.driver.AppleMCEDriver          1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.driver.AppleRAID          4.0.6
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.kext.ATI2600Controller          6.3.6
com.apple.kext.ATISupport          6.3.6
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.driver.AppleUSBHIDMouse          162
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleHIDMouse          162
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 4 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: ST3320820AS_P, 298.09 GB
Serial ATA Device: WDC WD5000AAKS-00A7B0, 465.76 GB
Serial ATA Device: WDC WD5000AAKS-00A7B0, 465.76 GB
Serial ATA Device: WDC WD5000AAKS-00D2B0, 465.76 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x911c, 0xfd400000 / 3
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921c, 0xfd420000 / 6
USB Device: Hub, 0x0424 (SMSC), 0x2503, 0xfd300000 / 2
USB Device: KEYBOARD, 0x4320, 0x0302, 0xfd330000 / 5
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd310000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown

That's a Kernal Panic. Look at this Apple Article: http://support.apple.com/kb/TS3742

Regular problem with video playback & audio video sync

So, I am regularly having two problems (I wonder whether they are connected) that I cannot solve and am hoping someone can tell me if I am out of luck or if I need to do something or add something.
For example, because it happened again today. These are details about the file stuff:
Type:AVI
Bit Rate:133kbps
Dimensions:624x352
Audio format: LameMP3
Frame rate: 23 frames/second
Data Rate: 1131 kbps
Video Sample Size: 12 bit
Video Compression: XVID
First Problem: If I play the file - I use Media Player Classic - it plays fine. Open it in Windows Media Player and it plays fine. Try to edit it in Premiere and the file loaded into Premiere is filled with what I believe are called audio video sync problems, so I have to constantly unlink audio and video and adjust it. It loads and does not need to conform.
I have the same problem on my laptop(Windows XP Home) and desktop (XP Pro), the desktop with twice the RAM. I have the K-lite Mega codec pack installed. I would call myself a beginner when it comes to video editing. I understand generally what codecs are but I am not capable to making any tweaks to the K-lite Mega codec pack (if I should have) so it is setup as installed.
Second Problem: The video in the playback box never plays back normally. I have tried adjusting the playback settings: have changed the aspect ratio between the software and harware option and adjusted between the three desktop display options. Occasionally it is "ok" but most of the time not and never just normal.
Any help is much appreciated.
Thank you.

I tried this already and then we had a blackout so going to try again and hope it goes through before a second one...lol
Hello:
Thank you Robert J. Johnston, the_wine_snob, Paul_LS and SteveGrisetti for your help so far.
So this is where I am at now:
Files all seem to be of the same type, so I will just say "the file" for the one I am working with right now.
Loaded file into VirtualDub. I like that program. Well done, whoever made it. Did some basic cutting of unwanted stuff. Saved as AVI. Saved both a Direct Stream Copy and a Full Processing Copy.
Opened the FP copy in Premiere Elements and it plays without audio sync problems that I can see. Have edited it some so far and still no problems.
Before I do any more editing work, I decided to save it (SHARE) in different formats to see what happens.
Goal: Looking for no audio sync problems. Best quality I can get with a 1GB file size limit.
Saved as DV-AVI: plays fine. no audio sync probelms. love the video quality. 2.95GB, so too big
Saved as Flash: Do not see any audio sync problems. Do NOT like the quality (flips back and forth between clear and all pixely (is that a word). 32 MG
Saved as Mpeg: Media Player won't play it (thought Media Player with KL Mega Codec played everything?) (It loads it but doesn't play?); Quicktime won't play it. Windows Media Player just did. Do not see any audio sync problems. Like the video quality. 631 MB.
Saved as Windows Media: Do not "think" there are any audio sync problems; if there are, they are very subtle. Not crazy about video quality. Better than flash video option though still flickers between two types of qaulity (if that makes sense) . 52MB
Any suggestions as to what I should do at this point to meet my stated goal. I assume [share]ing is what I should do? Is there any exporting or any other options I do not know about. Without your help I figure I will Share to MPEG? Not sure why Media Player won't play it and Windows Media Player will?
Any thoughts on the best choice for me? Thanks for your help.

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

Is there a Shared Video size limit?

Hello, I am having a problem accessing videos from a shared library. My smaller video podcasts are not a problem. I purchased a TV Show from iTunes and can only watch it on that specific pc. If I try to access it from my laptop, I can see it in the list but when I try to play it, I never get a "Connecting to URL" message. WHen I press the play button in iTunes, it stays pressed in while trying to access but then stops after about 8 seconds.
Is there a size limit on what can be shared on video?
Is there a timeout setting in iTunes in that if it doesn't receive enough data within 5 seconds from the host iTunes pc it doesn't allow the video to come across?
Here is what I have done already to help in further questions.
Both machines are on Windows XP Home
Both machines have Quicktime 7.4.1
Both machines have iTunes 7.6
Both machines are on the same local subnet (wireless) and same workgroup
Both machines have the firewalls turned off
Again, like I said if I play my 5-25mb video podcasts, they work fine.

I'm having the same problem.
I have a bunch of podcasts that have video.
I can watch them fine on my main PC.
Sharing via iTunes, I can watch shorter videos fine on my other PC. Anything over several minutes though just won't play via sharing. I see the same symptoms housej5 describes.. the "Now Playing" box comes up with "Nothing Playing" and simply nothing happens.
Anyone else seeing this? Any clues?
Both machines running XP Pro and iTunes 7.6.1.9

End video size

hi,
i want to use imovie for some basic editting and rendering.
i have a load of mov's, captured using snapz pro x at 720x480 that i simply want to import, cut bits out, and export as one file for use in idvd.
i have 2 questions...
1. is there a way, in imovie, to change the end video size? im using 720x480 source files, and when i export as a movie it either crams it into a 640x480, or letterboxes it. i just want the output size to stay the same as the input size (720x480). if not, whats the optimum size people use for tv viewing?
2. the content of my video is pretty intricate. its got a feint grey box in the middle of the screen, which the video plays in (screen in screen basically).
assuming that imovie will only give me 640x480 output, i cropped the clips to 640x480, inputted them, pieced them together, and outputed them. imovie gives me the right size, but really messes up the video. the grey line is blurred and not visible at the bottom, and the moving images themselves look awful.
all i want is to export a video that has the same properties (size, resolution etc) as the input files!
if screen grabs would help, i can put some up.
thanks in advance

yes, i've had varied success with transferring screen grabs to tv. problem is, its the only option - im using a moving image enivronment (pure data) and the only way to save the video you create is through snapz (well, theres no way of saving it within the software).
one way i will try is to video out from the laptop into a tv and record with a dvd recorder, see if that helps.
i think its trial and error with the captures. the 720x480 looked pretty good, but the refresh rate was out and it flickered a fair bit. the refresh rate was better on 640x480, but it didnt look as good.
thanks for the advice

Cp6 TOC - video size and image border

Hi,
There seems to be a number of changes to the TOC in cp6 32 bit. Can anyone confirm whether they are having the same issues ?
a/ The video space size is now 4 pixels narrower. It was 196 by 144
http://forums.adobe.com/thread/830658
and it now appears to be 192 * 144 according to the help. . We want to know whether this is right as it means we have re-encode videos.
b/ images now have a border when placed in the TOC. We have a logo with a white background on a white stage so it stand out. There doesn't seem to be an option to turn borders off
rgds Paul

Hi,
The video space size and the border has definitely in 5.5 was also 196.
Can you confirm the height as well
Could you advise the border on the images in TOC information as this makes adobae captivate causes look poor as Borderless images are the norm in graphic design.
1. video size
The published size is 192 in 5.5 and 6
It used to squash it in 5.5, but it now gives an error message and then squashes it
In 5.5 in section non interactive objects and media - > using slide video -> best practices to use slide video effectively it is listed as
"Video dimensions:
Ensure that the video object dimension is the same as that of the original video for optimal quality.
Do not change the aspect ratio of the video even if you cannot maintain equal dimensions for the video object and original video. Otherwise, the video loses quality.
Keep the dimensions of a video that you want to include in the TOC as: Height 144 and Width 196."
In 6 you get an error message saying it should be 192 * 144
This blog also gives the same number
http://captaincaptivate.com/?p=550
These forum answers also give the same answer
http://forums.adobe.com/message/3579313#3579313
http://forums.adobe.com/message/4065836#4065836
This adobe seminar by Dr Singh also gave the same answer according to my notes ( but its been deleted)
http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775531&loc=en_us
order when placed in the TOC. We have a logo with a white background on a white stage so it stand out. There doesn't seem to be an option to turn borders off
2. border around image in the TOC
We have tried in the old version. None of them had a border around the image in the TOC in 5.5
rgds Paul

ITunes 'Video Size' option not available.

My earlier version of iTunes was getting cranky and stopped working earlier today. I took it off the box and reloaded the new version. It works fine except for this one thing noted above. My videos always fill the window now, no matter their original size was. With some older vids, this can be quite annoying as they get too blurred. When I check the the 'Video Size' option, it's greyed out and unavailable. I can't get the option when I'm watching the video either.
BTW, I'm not having this problem in QuickTime.

This is an old thread, but in the latest iTunes, edition 10.4, I found myself unable to use the keyboard shortcuts to change the size of the video from iTunes.
I dug around and found no way to get that feature to work.
What does work, though not as easily (I do prefer shortcut keys), is to right click in the video window to show the options (you do have to do it several times should the first request not change the size as much as you like). Otherwise, you can just click and stretch or shrink using the bottom right corner tool in Snow Leopard or any corner in Lion.

Video sizes provided by the device not supported.

Hey guys,
I am trying to use FME to run a live broadcast of my desktop
PC on www.justin.tv. I have an 8800GT with forced s-video out on my
desktop, running to an HP ExpressCard TV Tuner on my HP Laptop. The
TV tuner lights up when it is plugged in, and I can receive video
via Windows Media Center (while browsing for TV signals, satellite
then svideo input) so I know that part is working. I'm trying to
use FME to pick up this input (like a capture card) from my desktop
and broadcast it on justin.tv. However, it seems like no matter
what I do, it always reports "unexpected problem encountered" and
says "video sizes provided by the device not supported."
Do I just have to bite the bullet and get a real capture
card, since this TV tuner is probably incompatible? I heard
something about FME needing raw video for input, rather than
something encoded, and I think this tuner encodes into MPEG
something or other automatically. Could someone suggest an
affordable and easy to use capture card for someone with limited
technical knowledge that will work flawlessly with FME?
Thanks for your time!
-Cameron

Then your Canon video camera is not really HD to the core
definition. It seems Canon (and everyone else for that matter),
tweak their statistics in order to say something to help boost
sales-and it works for them.
Use the DV option and you can stream live to the best of
your little canon's ability. The only sizes that pop up on your
select a size list, are the sizes that that camera can handle.
3.0-don't hold your breath thinking that 3.0 is going to
solve too many problems. Remember, it's still a free platform, and
Adobe or anyone else-will only give so much away for free. The
trick is to buy the $4,500 version and the World is yours.
Anyway, good luck Monty!
Happy Holidays,
Dirty South TV

Problems whit video size

Similar Messages

Maybe you are looking for