Problems with a read only fla file.

Hello,
I need help finding out why some of my .fla file will not save as the same name. When I try to save it says "Cannot save file! This file may be read-only or is open in another application. Save using a different name or close the file and try again." I did evetyrhing it says and it still does not work, does anyone know what the problem is?
Thanks in advance

Hi,
I'm on a Mac (OS X 10.6.7) and using Flash pro CS5 (and Flash Builder). I started to get a warning in Flash about jagged fonts. I used Mac's font book to validate and clean up my fonts. After that, whenever I open this one FLA, it ask me to map some fonts, which I did, then it opens. After opening, the Flash IDE becomes unusable, most of the text in the palletes disapear and I can not tell what most things are. I also tried setting the fonts to defaults, same issue, although that did fix the issued for half day, it's now not working, and often crashes when I just click on a text field. I started my Mac up in safe mode, the FLA does work fine in Safe Mode, but I can't remap the fonts 'cause all none system fonts are dissabled in safe mode.
I was getting a lot of crashes when trying to use Mac's Font Book. After validating fonts, opting to remove bad fonts would crash font book. It took about two hours to clean up my fonts. At least I think they are good now...
I think I'm going to go through every text field in the FLA in safe mode and change them to a system font (and write down what font I wanted the text field to be), then restart the Mac in normal mode and see if I can remap the fonts in the Fla. Unfortunetly this Fla is huge with many text fields : (

Similar Messages

A problem with TEXT READING from a file

Hi all,
I've been trying to parse a text file, read it line by line and then write it line by line in another file. I use BufferedReader and BufferedWriter.
However, it seems that at each line it doesn't read the first character!!! How is this possible?
Here is my piece of code:
public class ParseMDL {
     public BufferedReader readMDL;
     public BufferedWriter writeMDL;
     public ParseMDL() {
          try {
               writeMDL = new BufferedWriter(new FileWriter("mdlOUT.mdl", true));
          } catch (IOException e) {
               System.out.println("Exception: Error with the output .mdl file!");
          try {
               readMDL = new BufferedReader(new FileReader("subsystemblock.mdl"));
          } catch(FileNotFoundException e) {
               System.out.println("Exception: Input .mdl file cannot be found!");
     public void executeMDLScanner() {
               String strIN, strOUT = null;
               try {
                    while(readMDL.read() != -1) {
                         strIN = readMDL.readLine();
                         System.out.println(strIN);
                         if(strIN.contains("MaskPromptString")) {
                                   strOUT = "\t " + "MaskPromptString" + "\t     " + "newENTRIESSSS";
                                   System.out.println(strOUT);
                         //else just copy the line
                         else {
                              strOUT = strIN;
                         try {
                              writeMDL.write(strOUT);
                              writeMDL.newLine();
                         } catch (IllegalArgumentException e) {
                              System.out.println("Exception: Illegal Argument Exception");
                    writeMDL.close();
                    readMDL.close();
               } catch(IOException e) {
                    System.out.println("Exception: IO exception!");
}THANK YOU!
Message was edited by:
Pesho_318i
Message was edited by:
Pesho_318i

Don't do this:while (readMDL.read() != -1) { // <-- reads the first character of the line
    strIN = readMDL.readLine(); // <-- reads the rest of the lineInstead do something like this:while ((strIN = readMDL.readLine()) != null) { // <--- reads all the line in one shot
    ...Regards

How to retrieve data from a read-only Excel file

Hi Developers,
I'm trying to retrieve data from a read-only Excel file. I used the same code that I used to retrieve data from a normal Excel file, but it can't work.
My code is as followed:
try
InputStream KpExcel = new FileInputStream("kp.xls");
HSSFWorkbook Kpwb = new HSSFWorkbook(KpExcel);
HSSFSheet Kpsheet = Kpwb.getSheetAt(0);
catch(Exception e)
e.printStackTrace();
System.out.println("Exception: "+e.getMessage());
The error I received is as followed:
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at org.apache.poi.hssf.record.RecordFactory.createRecord(RecordFactory.java:224)
at org.apache.poi.hssf.record.RecordFactory.createRecords(RecordFactory.java:160)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:163)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:210)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:191)
at photoproductionsystem.IncomingWIPPanel.getKp(IncomingWIPPanel.java:118)
at photoproductionsystem.IncomingWIPPanel.<init>(IncomingWIPPanel.java:76)
at photoproductionsystem.TabbedDisplay.<init>(TabbedDisplay.java:47)
at photoproductionsystem.Display.create(Display.java:73)
at photoproductionsystem.Display.init(Display.java:44)
at photoproductionsystem.Display.main(Display.java:229)
Caused by: java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at org.apache.poi.hssf.record.UnknownRecord.<init>(UnknownRecord.java:62)
at org.apache.poi.hssf.record.SubRecord.createSubRecord(SubRecord.java:57)
at org.apache.poi.hssf.record.ObjRecord.fillFields(ObjRecord.java:99)
at org.apache.poi.hssf.record.Record.fillFields(Record.java:90)
at org.apache.poi.hssf.record.Record.<init>(Record.java:55)
at org.apache.poi.hssf.record.ObjRecord.<init>(ObjRecord.java:61)
... 15 more
Can someone please help me with my problem? Thanks a lot in advance!

Madeline wrote:
how do I ask at Apache mailing list?I wonder why it seems to be a strange idea to some people to look at the software vendor's site for product support. :p
http://poi.apache.org/mailinglists.html

Disable Save or Save As for Read Only mpp file

Hi,
I have a read only mpp file and need to make sure that it cannot be Saved / Saved As by anybody in Team. They should only have access to view the file.
How can enable a file which does not allow save / save as?

ihvarrived,
You didn't mention anything about being in a Project Server environment, so I assume Shiva's response has no meaning for you.
With regard to an approach to prevent unauthorized users from saving a file let me again stress that, in my opinion, the best approach for this issue is training. That has the great advantage of mutual respect and cooperative effort in a team environment.
To implement a more covert approach you will need to do the following:
1. With the file open go to Developer/Code group/Visual Basic
2. Hit the Project Explorer icon
3. In the Explorer hierarchy, under the VBAProject double click on the "ThisProject"
4. In the code window, paste the following code:
Private Sub project_open(ByVal pj As MSProject.Project)
MsgBox "This file is write protected. You can make changes" & vbCr & _
    "for temporary what-if scenarios, but you will not be" & vbCr & _
    "able to save without the correct password", vbExclamation, "Warning!"
End Sub
Private Sub project_beforesave(ByVal pj As MSProject.Project)
pass = InputBox("enter save password")
If pass <> "xyz" Then 'string in quotes is the password you chose for saving, "xyz" is for illustration only
    SelectAll
    EditDelete
End If
End Sub
5. While still in the code window, go to Tools/VBA Project Properties/Protection tab
6. Check the "Lock this project" option
7. Enter and confirm a password. It can be the same as your save password or a different password (This will insure that only you can view and modify the above code)
8. Hit OK, then File/Save [your filename] to capture your macro in the file. Note, at this point you will be required to enter your save password.
Be advised that if a user does attempt to save without the correct save password, the file will be zeroed out and saved (i.e. nothing). That means that whenever you save the file you should also save a backup under a different name, so you can restore the
file if necessary. I couldn't figure out a good way to work around this problem. If the user always tries a "Save As" this wouldn't be an issue, but if they chose "Save" and you don't have a backup, you're screwed.
If this answers your question or is at least helpful, please mark it accordingly.
John

Lion administrator setting changed to read only for file sharing. Now hung machine

I was trying to network my Mac with a WIndows 7 machine and tried to have my name in the file sharing read write instead of other users such as administrator when I changed the administrator to read only for file sharing rights and could not add my name as a file sharing user with read write permissions Really silly move
I have performed a repair of disk permissions however still hung.
Whats worse is that my time machine for the last three days has been disconnecting when backing up leaving a partially complete backup. Backup failed. I also left a apple support community message a few days ago to solve it.
So its critical
Timely HELP is needed.

This same problem happened to me, all the sudden one day my mac decided to revert to the original standard root username and password which I obviously did not know. In order to change this:
1) Activate single user mode on reboot as by pressing cmd + s as your computer starts up. Make sure you do it right away, and keep the keys pressed down.
2) Where the cursor pops up, type exactly
+/sbin/mount - uw/+
3) When the next cursor pops up type exactly
passwd
4) Then you can type any password you want (now changing the root password to be what you want)
Note you will not be able to see what you type, but the text is being recognized
5)The computer asks for you to retype the password, retype it
6) Type reboot
Once the computer restarts you can navigate to system preferences>accounts> and then unlock the account (lock is located on the bottom left corner) using Username: root and the password you just set. Henceforth, you can appoint your account as the administrator. Hope it works!

Problem with windows not liking any files named prn

I recently found a problem with windows not liking any files
called prn.html, prn.cfm etc etc. If you try and create a file like
prn.html then it will say "File already exists".
I initially thought it was a Cold Fusion error as I was
getting some bizarre error messages when trying to write prn.html
using cffile.
Does anyone know a work around for it?

Hi,
Not only "prn" but also for the terms like "AUX", "NUL" you
can't create any directories or files in Windows because these are
reserved terms with Windows which is meant for some device
drivers...

Problem with adobe reader, commenting

one of our authors is using adobe reader x 11,1, and I send him a pdf (enabled commenting and measuring), but for some reason the commenting-fields does not show on his screen?
should I save the pdf in another way?

What do you mean by "commenting fields" exactly? By “commenting filds” I mean the tools in top of the page – delete, highlight etc. When I send the pdf, I save it as “file - save as - reader extended pdf – enable commenting and measuring”, otherwise the commenting tools normally don’t appear by the author.
Are they existing comments? no, it is the text in his pdf-book he needs to correct
Is he able to access the commenting tools? no
You can try sending a non-enabled version since Reader 11 can add comments to a non-enabled document. will try that J
Fra: George Johnson [email protected]
Sendt: 6. november 2012 16:16
Til: Forlagene Idag & Nordan
Emne: problem with adobe reader, commenting
Re: problem with adobe reader, commenting
created by George Johnson <http://forums.adobe.com/people/George_Johnson> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4826849#4826849

Continued problems with Adobe Reader 9.3.1

Adobe Reader stops at the half-way mark in the progress block when loading a form to print. Cannot get this fixed. Does anyone out there have a fix for this. Is Adobe even recognizing that there is a problem with this. Error message keeps telling me that there is a problem with Adobe Reader, exit and try again.

I haven't been able to print any .pdf files since I downloaded 9.3.
My message says Internet Explorer has closed it down because of data executable files. I've changed my DEF settings to allow
Adobe Reader but it still doesn't work. I never had any problems before with newer versions.

How do I convert a read only word doc to a read only pdf file?

How do I convert a read only word doc to a read only pdf file?
Thanks, Linda

Hi Linda,
I just tried it, and was able to convert a Word .doc to to PDF, in spite of the fact that it was marked Read Only. Here are the instructions for uploading and converting to PDF with Acrobat.com:
http://help.adobe.com/en_US/Acrobat.com/Acrobat/WS396AAA88-4AA4-4a40-87B8-004A5DC1E131.htm l
Kind Regards,
Michelle

Having problem with adobe reader

Hi,
I have a problem with adobe reader in my cell phone E71 model recently.I could open any pdf files till yesterday,but now without any reason the adobe reader icon in the office folder does not open.I wanna know what should I do.

Might be some problem with adobe reader. You may Google another pdf app called pdf plus. Install it and see if the problem is solved or not.
Nokia C7

How to make BPEL File Adapter read only new files?

Hello
we have BPEL processes that define to run from bpel component - file adatper-
when a file come into location that it is path on the linux server . the bpel start run when "File Adapter" bpel component recognize that new file come to the location. its PollingFrequency define to 5. property name="DeleteFile" value="false" so the files remaine there.
we want to migrate the bpel to new SOA version so we did export and deploy to new SOA Domain.
the location of the file adapter is the same.
but when the BPEL processes deployed its start to run for all the files that are in this location- that the file adapter define on .
even the original soa tooks those files and start the BPEL processes for each one of them. also the new SOA that we did deploy to the BPEL processes take those files even if they are very old.
we want the file adatper we take only new files . the start point is the time when we do deploy to the process so if we do deploy in 10:00 am we dont want this bpel will take files from 9:00 or earlier time
Please help , how we can do this?
Thanks

thank you
do you kno hat the value means in the example:
Java mon amour: File Adapter metadata with SOA Suite
<property name="jca.file.LastModifiedTime" value="1293041258635">
what should I rite for read only the files that are only neer then yesterday?

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Download read only excel file

Hi Experts,
How to download a READ ONLY excel file to workstation (local Machine).

Hi kaleemullah,
Steps to create a BDC program.
1. Create an internal table with fields same as Excel sheet fields.
2. Declare an internal table with BDCDATA table to store the BDC recording.
3. Declare an internal table with BDCMSGCOL to store the error messages after
the execution of the BDC.
4. Write the code using the fun. module ALSM_EXCEL_TO_INTERNAL_TABLE
to upload the data from the excel sheet.
5. loop that internal table and write the Subroutines to fill the internal table
BDCDATA with the recording of a specified Transaction Code.
6. Using Call Transaction execute the BDC recording.
7. Check Sy-subrc = 0 and store the error messages in the internal table.
8. If you want you can pass those error records to a session using the SESSION method.
Here is an example of a BDC program, but this program is from a text file. Change the function module WS_UPLOAD with ALSM_EXCEL_TO_INTERNAL_TABLE
to upload an excel and write the program with your BDC recording. You can do recording using t-code SHDB.
Sample Program:
REPORT ZRAJ_DATASET_XD01 NO STANDARD PAGE HEADING LINE-SIZE 132
LINE-COUNT 60
MESSAGE-ID Z00.
Table/Structure declarations. *
TABLES : KNA1. "Customer master
Constants declarations. *
CONSTANTS : C_MODE VALUE 'N',
C_UPDATE VALUE 'S',
C_X VALUE 'X',
C_SESS TYPE APQI-GROUPID VALUE 'ZCUSTOMER', "Session Name
C_XD01 LIKE TSTC-TCODE VALUE 'XD01'.
Variable declarations. *
DATA : V_FNAME(15) VALUE SPACE, " Name of file to be created
V_FAILREC TYPE I, " No of failed records
V_MSG(255), " Message Text
V_ERRREC TYPE I, " No of failed records
V_LINES TYPE I. " No of records
*-- FLAG DECLARATIONS
DATA : FG_DATA_EXIST VALUE 'X', " Check for data
FG_SESSION_OPEN VALUE ' '. " Check for Session Open
Structures / Internal table declarations *
*-- Structure to hold BDC data
TYPES : BEGIN OF T_BDCTABLE.
INCLUDE STRUCTURE BDCDATA.
TYPES END OF T_BDCTABLE.
*-- Structure to trap BDC messages
TYPES : BEGIN OF T_MSG.
INCLUDE STRUCTURE BDCMSGCOLL.
TYPES : END OF T_MSG.
*-- Structure to trap ERROR messages
TYPES : BEGIN OF T_ERR_MSG,
MESSAGE(255),
END OF T_ERR_MSG.
*--Internal table to store flat file data
DATA:BEGIN OF IT_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
KTOKD LIKE T077D-KTOKD,
NAME1 LIKE KNA1-NAME1,
SORTL LIKE KNA1-SORTL,
ORT01 LIKE KNA1-ORT01,
PSTLZ LIKE KNA1-PSTLZ,
LAND1 LIKE KNA1-LAND1,
SPRAS LIKE KNA1-SPRAS,
LZONE LIKE KNA1-LZONE,
END OF IT_KNA1.
*-- Internal table to hold BDC data
DATA: IT_BDCDATA TYPE STANDARD TABLE OF T_BDCTABLE WITH HEADER LINE,
*-- Internal Table to store ALL messages
IT_MSG TYPE STANDARD TABLE OF T_MSG WITH HEADER LINE,
*-- Internal Table to store error messages
IT_ERR_MSG TYPE STANDARD TABLE OF T_ERR_MSG WITH HEADER LINE.
Selection Screen. *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FLNAME(15) OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R_LIST RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003.
PARAMETERS : R_SESS RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 30(20) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Event:Initialization *
INITIALIZATION.
AT Selection Screen. *
AT SELECTION-SCREEN.
Event: Start-of-Selection *
START-OF-SELECTION.
V_FNAME = P_FLNAME.
PERFORM GET_DATA.
PERFORM GENERATE_DATASET.
Event: End-of-Selection *
END-OF-SELECTION.
IF FG_DATA_EXIST = ' '.
MESSAGE I010 WITH TEXT-009.
EXIT.
ENDIF.
PERFORM GENERATE_BDCDATA.
PERFORM DISPLAY_ERR_RECS.
Event: top-of-page
TOP-OF-PAGE.
FORM DEFINITIONS *
*& Form get_data
Subroutine to get the data from mard
--> p1 text
<-- p2 text
FORM GET_DATA.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'C:\XD01.TXT'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
DATA_TAB = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF IT_KNA1[] IS INITIAL.
FG_DATA_EXIST = ' '.
ENDIF.
ENDFORM. " get_data
*& Form GENERATE_DATASET
text
--> p1 text
<-- p2 text
FORM GENERATE_DATASET.
MESSAGE I010 WITH 'OPENING FILE IN APPLICATION SERVER'.
**--Creating a data set in application server
OPEN DATASET V_FNAME FOR OUTPUT IN TEXT MODE.
**---Transfering data from internal table to dataset
MESSAGE I010 WITH 'TRANSFERING DATA FROM INETERAL TABLE TO THE FILE'.
LOOP AT IT_KNA1.
TRANSFER IT_KNA1 TO V_FNAME.
ENDLOOP.
**--Closing the dataset
MESSAGE I010 WITH 'CLOSING THE FILE'.
CLOSE DATASET V_FNAME.
ENDFORM. " GENERATE_DATASET
*& Form BDC_DYNPRO
text
-->P_0467 text
-->P_0468 text
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
text
-->P_0472 text
-->P_0473 text
FORM BDC_FIELD USING FNAM FVAL.
IF NOT FVAL IS INITIAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDIF.
ENDFORM.
*& Form GENERATE_BDCDATA
text
--> p1 text
<-- p2 text
FORM GENERATE_BDCDATA.
REFRESH IT_KNA1.
Opening dataset for reading
OPEN DATASET V_FNAME FOR INPUT IN TEXT MODE.
Reading the file from application server
DO.
CLEAR: IT_KNA1,IT_BDCDATA.
REFRESH IT_BDCDATA.
READ DATASET V_FNAME INTO IT_KNA1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
Populate BDC Data for Initial Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0100',
BDC_FIELD USING 'BDC_CURSOR' 'RF02D-KUNNR',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'RF02D-KUNNR' IT_KNA1-KUNNR,
BDC_FIELD USING 'RF02D-KTOKD' IT_KNA1-KTOKD.
Populate BDC Data for Second Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0110',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NAME1',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'KNA1-NAME1' IT_KNA1-NAME1,
BDC_FIELD USING 'KNA1-SORTL' IT_KNA1-SORTL,
BDC_FIELD USING 'KNA1-ORT01' IT_KNA1-ORT01,
BDC_FIELD USING 'KNA1-PSTLZ' IT_KNA1-PSTLZ,
BDC_FIELD USING 'KNA1-LAND1' IT_KNA1-LAND1,
BDC_FIELD USING 'KNA1-SPRAS' IT_KNA1-SPRAS.
Populate BDC Data for Third Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0120',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-LZONE',
BDC_FIELD USING 'BDC_OKCODE' '=UPDA',
BDC_FIELD USING 'KNA1-LZONE' IT_KNA1-LZONE.
CALL TRANSACTION C_XD01 USING IT_BDCDATA
MODE C_MODE
UPDATE C_UPDATE
MESSAGES INTO IT_MSG.
IF SY-SUBRC <> 0.
*--In case of error list display
IF R_LIST = C_X.
V_ERRREC = V_ERRREC + 1.
PERFORM FORMAT_MESSAGE.
IT_ERR_MSG-MESSAGE = V_MSG.
APPEND IT_ERR_MSG.
CLEAR : V_MSG,IT_ERR_MSG.
ENDIF.
*--In case of session log
IF R_SESS = C_X.
*-- In case of transaction fails.
IF FG_SESSION_OPEN = ' '.
FG_SESSION_OPEN = C_X.
PERFORM BDC_OPEN_GROUP.
ENDIF. " IF FG_SESSION_OPEN = ' '.
*-- Insert BDC Data..
PERFORM BDC_INSERT_DATA.
ENDIF. " IF R_SESS = C_X.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF SY-SUBRC <> 0.
ENDDO.
Closing the dataset
CLOSE DATASET V_FNAME.
*-- Close the session if opened
IF FG_SESSION_OPEN = C_X.
PERFORM BDC_CLOSE_GROUP.
CALL TRANSACTION 'SM35'.
ENDIF.
ENDFORM. " GENERATE_BDCDATA
*& Form BDC_OPEN_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = C_SESS
HOLDDATE = FILLER8
KEEP = C_X
USER = SY-UNAME
RECORD = FILLER1
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_OPEN_GROUP
*& Form BDC_INSERT_DATA
text
--> p1 text
<-- p2 text
FORM BDC_INSERT_DATA.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = C_XD01
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_INSERT_DATA
*& Form BDC_CLOSE_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_CLOSE_GROUP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_CLOSE_GROUP
*& Form FORMAT_MESSAGE
text
--> p1 text
<-- p2 text
FORM FORMAT_MESSAGE.
CLEAR V_LINES.
DESCRIBE TABLE IT_MSG LINES V_LINES.
READ TABLE IT_MSG INDEX V_LINES.
CLEAR V_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MSG-MSGID
LANG = IT_MSG-MSGSPRA
NO = IT_MSG-MSGNR
V1 = IT_MSG-MSGV1
V2 = IT_MSG-MSGV2
V3 = IT_MSG-MSGV3
V4 = IT_MSG-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FORMAT_MESSAGE
*& Form DISPLAY_ERR_RECS
text
--> p1 text
<-- p2 text
FORM DISPLAY_ERR_RECS.
LOOP AT IT_ERR_MSG.
WRITE: / IT_ERR_MSG-MESSAGE.
ENDLOOP.
ENDFORM. " DISPLAY_ERR_RECS
Hope this resolves your query.
Reward all the helpful answers.
Regards

Problem with ImageIO.read and ImageReader JPG colors are distorted/wrong

(Using JDK 1.5)
ImageIO incorrectly reads some jpg images.
I have a jpg image that, when read by the ImageIO api, all the colors become reddish.
        try
            java.awt.image.BufferedImage bi = javax.imageio.ImageIO.read( new java.io.File("javabug.jpg") );
            javax.imageio.ImageIO.write( bi, "jpg", new java.io.File("badcolors.jpg") );
            javax.imageio.ImageIO.write( bi, "png", new java.io.File("badcolors.png") );
        catch ( java.io.IOException ioe )
            ioe.printStackTrace();
        }Why is this happening??? My guess is there is a problem with the ImageIO.read ?
the jpg can be downloaded at http://www.alwaysvip.com/javabug.jpg
<BufferedImage@11faace: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@1ebbfde transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 1691 height = 1269 #numDataElements 3 dataOff[0] = 2>
I have even tried creating a new buffered image but still have the same problem:
(suggested by http://forum.java.sun.com/thread.jspa?forumID=20&threadID=665585) "Java Forums - ImageIO: scaling and then saving to JPEG yields wrong colors"
        try
            java.awt.image.BufferedImage bi = javax.imageio.ImageIO.read( new java.io.File("javabug.jpg") );
            java.awt.image.BufferedImage out = new java.awt.image.BufferedImage( bi.getWidth(), bi.getHeight(), java.awt.image.BufferedImage.TYPE_INT_RGB );
            java.awt.Graphics2D g = out.createGraphics();
            g.drawRenderedImage(bi, null);
            g.dispose();
            javax.imageio.ImageIO.write( out, "jpg", new java.io.File("badcolors.jpg") );
        catch ( java.io.IOException ioe )
            ioe.printStackTrace();
        }I have used the following which works but does not use the ImageIO api. However, I tried using the ImageIO to write and it worked for writing which leads me to believe there is a problem with the reader.
(suggested by http://developers.sun.com/solaris/tech_topics/java/articles/awt.html "Server-Side AWT")
        try
            java.awt.Image image = new javax.swing.ImageIcon(java.awt.Toolkit.getDefaultToolkit().getImage("javabug.jpg")).getImage();
            java.awt.image.BufferedImage bufferedImage = new java.awt.image.BufferedImage( image.getWidth( null ), image.getHeight( null ), java.awt.image.BufferedImage.TYPE_INT_RGB );
            java.awt.Graphics g = bufferedImage.createGraphics();
            g.setColor( java.awt.Color.white );
            g.fillRect( 0, 0, image.getWidth( null ), image.getHeight( null ) );
            g.drawImage( image, 0, 0, null );
            g.dispose();
            com.sun.image.codec.jpeg.JPEGImageEncoder encoder = com.sun.image.codec.jpeg.JPEGCodec.createJPEGEncoder( new java.io.FileOutputStream( "goodcolors.jpg" ) );
            encoder.encode( bufferedImage );
            javax.imageio.ImageIO.write( bufferedImage, "jpg", new java.io.File("goodiocolors.jpg") );
            javax.imageio.ImageIO.write( bufferedImage, "png", new java.io.File("goodiocolors.png") );
        catch ( java.io.IOException ioe )
            ioe.printStackTrace();
        }BTW, the following does not work either:
            java.util.Iterator readers = javax.imageio.ImageIO.getImageReadersByFormatName( "jpg" );
            javax.imageio.ImageReader reader = ( javax.imageio.ImageReader ) readers.next();
            javax.imageio.stream.ImageInputStream iis = javax.imageio.ImageIO.createImageInputStream( new java.io.File("javabug.jpg") );
            reader.setInput( iis, true );
            java.awt.image.BufferedImage bufferedImage = reader.read( 0 );

I figured out the problem. It was an actual BUG in the JDK!
The code failed with the following JDKs:
java version "1.5.0_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_01-b08)
Java HotSpot(TM) Client VM (build 1.5.0_01-b08, mixed mode, sharing)
java version "1.5.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_03-b07)
Java HotSpot(TM) Client VM (build 1.5.0_03-b07, mixed mode)
The code ran sucessful with this JDK:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
If you are using the ImageIO classes, I highly suggest you upgrade to the latest JDK.
Best,
Scott

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

Problems with a read only fla file.

Similar Messages

Maybe you are looking for