Problems with a waking up a labview executable after computer hibernation?

I am just wondering if anyone has had any problems with waking up a labview executable after hibernating a computer. The executable was running before the computer was hibernated and it seems to have frozen not crashed after the computer was woken up. I am using Windows 7 and Labview 2009.
Thanks for your time.

What is the application doing? (if that even matters)
If it were performing a data-acquisition hardward process then that might matter..
I haven't experienced this problem.

Similar Messages

I have problems with photoshop CS5, it is not executed, it remains looking for plugi

I have problems with photoshop CS5, it is not executed, it remains looking for plugin

Please read these and proceed accordingly (restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

Problems with implementing LV shared vars for executable standalone applications

In order to implement shared variables, it appears that all networked computers must have LV compiler installed and running the code that will have the shared variables so that an association may be made thru explicit binding. The problem with this is that I want to build my applications on my development computers to use shared variables and then I want to make executables to distribute to locations that do not have LV compilers. If shared variables are only good on a machine that is currently running he source code, then this whole shared variable idea seems very unusable. Any ideas?

What you need to do is build an executable from your code using the
Application Builder, then you'll be able to run it on machines that do
not have LabVIEW installed. These machines will need to have the LabVIEW Runtime engine (needs to be the same version as your version of LabVIEW) and any needed driver packages (NI-DAQ, VISA, ect.) installed, but these are a free download.
Let us know if you have more questions.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Exit labview (executables) after using large text files

Hello,
I am using LabView 6.0 and his aplication builder / runtime engine. I wrote some VI`s to convert large Tab delimited textfiles (up to 50 mb). When I am finished with the file it is staying in the memory somehow and is staggered with other (text)files in such a way the computer is slowing down.
When I want to exit the VI (program) it will take a very long time to get lost of the program (resetting LabView) and get my speed back.
How kan I solve this problem for these large files?
Martin.

OK, this may be a bit of a problem to track down, but let's start.
First, while your front panel looks great, your code is very hard to read. Overlapping elements, multiple nested structures and a liberal use of locals make this a problem. My first suggestion would be to with a massive cleanup operation. Make more room, make wires straight, make sure things are going left-to-right, make subVIs, place some documentation and so on. You won't believe the difference this makes.
After you did that, we can turn to find the problems. Some likely suspects are the local variables and the array functions. You use many local variables and perform resizing operations which are certain to generate copies. If you do this on arrays with dozens of MBs of data, this looks like the most likely source of the problem. Some suggestions to deal with this - if you have repeating code, make subVIs or move the code outside of the structures, so that it only has to be run once. Also, you seem to have some redundant code. For instance, you open the file only to see if you get an error. You should be able to do this with the VIs in the advanced palette without opening it (and you won't need to close it, either). Another example - you check the exit conditions in many places in your code. If your loop runs fast enough, there is no need for it. Some more suggestions - use shift registers instead of locals and avoid setting the same properties over and over again in the loop.
After you do these, it will probably be much easier to find the problem.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
And one last thing - having the VI run automatically and then use the Quit VI at the end is not very nice. Since you are building it, it will run automatically on its own and you can use the Application>>Kind property to quit only if it's an executable.
Try to take over the world!

Problems with the new iPad and Joikuspot premium after iOS 6

Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
Vittorio

Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

Problem with fibre channel card and raid system after upgrading to 10.4.7

Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
Greetings from Heidelberg
Klaus
Xserve G4 DP 1 GHz Mac OS X (10.4.6) Mac OSX Server 10.4.7

You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

Problem with permissions in Aperture 2.4.1. after installing mountain lion, did repair permissions but it stop at 3/4 of the repair cycle? Does anyone know what to do, my library is 94gigs!

I tried all solutions to get my library permissions corrected, but nothing worked. Is this a known problem with ugrading to mountain lion for Aperture 2.4.1.? Does anyone have a new solution to get my library working again?
Thanks for any help.
Otto Muskee
Germany

I tried all solutions to get my library permissions corrected, but nothing worked. Is this a known problem with ugrading to mountain lion for Aperture 2.4.1.? Does anyone have a new solution to get my library working again?
Thanks for any help.
Otto Muskee
Germany

I have a problem with Adobe Reader that the page dissapears after 30 seconds or so

I am having a problem with one of the Companies that sell PC parts as their Parts list is in PDF format, when I click on their page Adobe Reader opens up after 30 seconds or so the screen goes blank, and I cannot read the PDF.
I have Re loaded the Adobe, and I am running Firefox vr 5.
Below is the Website I am looking at.
Many Thanks
Peter Harding
http://www.msy.com.au/Parts/PARTS.pdf

You need to buy the plug-ins you are using. This is a demo mode spoiler from some third-party plug-in.
Mylenium

Is anyone else having problems with the overdrive app not working right after new apple update

I am having problems with the overdrive app. I am only allowed to read about twenty pages of a book and then it tries to load more pages but does not. I have reinstalled the app but have the same problem. Any ideas.

Have to talked to the developer? Gone to their site? Do they have an update out for the newer OS?

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

Is there a problem with whether or not you have a dell computer for me to install adobe digital editions 4.0?

is there a problem with having a dell computer to install adobe editions 4.0 on my computer? this is stupid if true. if not what is the problem?

Please mention the exact error message that you are facing .

Problems with M-Audio Keystation 49e midi keyboard after 10.4.7 upgrade

I've noticed a problem with my midi keyboard and GB3 after this most recent OS upgrade. You start playing the keyboard using some instrument such as Grand Piano. After a while there is no sound coming out. You must turn off/on the keyboard, then it starts working again. Sometimes its not as easy, and it requires shutting down GB and restarting. This morning I had to actually reboot the machine before I could get any sound.
This is really a pain in the neck. My son is trying to practice his piano and keeps having to power cycle the keyboard every 5 minutes.
Any suggestions? This has happened before the OS upgrade, but it just seems to be happening more in the past few days.
Thanks,
Alfredo

To clarify my early post, I don't care for the feel of the controller, I own one as a back up, it sits around and always works perfect (plus it takes no drivers!) every time I plug it in. My friend has had one for a couple years as his main controller and recently it has started to give some ghost midi signals while recording (unintentional pitch and mod animations while recording) I was at another place recently where we had one that would not respond at all, 1 mac desktop, 1 powerbook and 1 dell laptop. All around I see this keyboard everywhere and it works fine for almost everyone on every computer, plus the one I own is perfect. But I have had some mixed results in my personal experiences with the device. I would be surprised if this device has developed an issue because of the mac os update, that sounds like a coincidence in my opinion because the device is "class compliant" and does not require drivers; but that is my opinion and a SWAG (the term SWAG is property of hangtime and borrowed, I hope HT takes no offense)

Problems with a waking up a labview executable after computer hibernation?

Similar Messages

Maybe you are looking for