Problem with fibre channel card and raid system after upgrading to 10.4.7

Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
Greetings from Heidelberg
Klaus
Xserve G4 DP 1 GHz Mac OS X (10.4.6) Mac OSX Server 10.4.7

You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

Similar Messages

Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?

Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon

Problem with discrete graphic card and DirectX 11

If I try any application to launch with discrete graphic card (nvidia geforce 740m) that using directx 11 it always crashes.
There no problems with directx 9 on on this graphic card.
There are no problems with integrated graphic card whether application using directx 9 or 11. Problem occurs only with discrete graphic card and directx 11.
The things that i did:
- Reinstall Windows
- Install latest driver updates (I also tried to uninstall latest and install recomended driver downloaded from the oficial HP support 'driver download' web page)
- different options on nvidia control panel 3d settings page
I also tried microsoft 'Direct3D Tutorial Win32 Sample' source code to build and debug. It is failed in function IDXGISwapChain:resent with code DXGI_ERROR_DEVICE_REMOVED and ID3D10Device::GetDeviceRemovedReason returns DXGI_ERROR_DRIVER INTERNAL_ERROR.
Is there any chance that is not hardware malfunction?
Model Envy 15-j175er
OS Windows 8.1 64

@Enegue ,
Hello and thank you for posting on the HP support forum. In your situation I would consider keeping with Directx 9. The reason I say this is your notebook is not a performance gaming machine. It is designed to be fore general use.
Some cards will notice issues when upgrading to direct 11 from a lower level.
Not to mention with your notebook you will want to stick with the drivers only provided from the HP support site. They are proprietary for the notebook and could be the reason why the directx 11 is not working.
Here is the link to your systems supported drivers.
HP ENVY 15-j175er Notebook PC (ENERGY STAR)
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with the "lenovo Rescue And Recovery" system. (lenovo 3000 N500).

hi!
yesterday i ran Kaspersky virus scan tool and it detect file named "tvtfilter.sys" as suspicious file and thefore delet it.
today when i was restart my laptop, i got error message on startup that say:
Microsoft Visual C++ Runtime Library Runtime Error! "C:\Program Files\Lenovo\Rescue and Recovery\rrservice.exe" abnormal program termination.
after some google search i've understand that "tvtfilter.sys" was critical file of "Rescue And Recovery" system.
so, any one with "Rescue And Recovery" running on his laptop can upload for me this file?
it's located in "C:\WINDOWS\SYSTEM32\DIRVERS\" and it's name is "tvtfilter.sys"
thank you!
BTW, ive tried to re-install it but it wont let me because of some error message

Hi eitrnel,
Just a thought: give a try to un-intsall the Rescue and Recovery from the Control Panel first before re-installing it.
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problems with the new iPad and Joikuspot premium after iOS 6

Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
Vittorio

Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5

Problems with browsing on Safari and Firefox since Leopard upgrade ??

Ever since I upgraded to Leopard, I am experiencing consistent problems while browsing. Both Firefox and Safari stall when I click on links or try to load pages. The browsers just appears dead and the loading icons just stall. Firefox is much worse than Safari with every 3rd or 4th click causing a stall. I have to wait about a minute before the click is recognized and the page is loaded.
I thought it might be my airport connect but I have other Windows comps on the same network and they don't have the problem.
I haven't seen any thread in the Safari discussions about this and can't find anything on the net about it either.
Anyone know what the problem might be?
Safari 3.1.1
Firefox 2.0.0.14
Leaopard 10.5.2

There were no error messages in the console for the stalling. However after I plugged the ethernet cable into the Imac, the problem seems to have gone away.
This is good but how can I fix the problem with my airport wireless connection ?

Big problems with my graphic card and 865neo2

i am using
msi865pe neo2(no lan)
p4 2.8 800mhz
2X512mb kinstom ram
sapphire radeon graphic card
sound blaster exdigy
msi dvd
msi cdrw 52m
there is a very weird problem tt i am facing now,the latest radeon catalyst is 3.8,but when i use this driver,my computer always shut down suddenly when i play games,but when i use catalyst 3.2,there is no problem and everything works well(from 3.2~3.8 all with errors)
does it relate to agp8x setting? cos radeon9600pro is running on 0.8v right,but why i can only set the votage upto 1.5v?
anyone knows why?

Actually there'll be something like this:
+3.3v -> 28A
+5v -> 32A
+12v -> 22A
-5v -> 0.5A
-12v -> 0.5A
Please check again.

Problems with the graphic card and adobe photoshop cs5

hello,
i installed adobe photoshop cs5 for my sisters computer:
specifications:
Prozessor: AMD Phenom™ II X6 1090T Six-Core Prozessor(3,2GHz, 9MB Cache)
Festplatte: 2x 1 TB SATA II
Arbeitsspeicher: 8 GB DDR3
Grafikkarten: VGA PCI-Express ATI Radeon™ HD5870 1GB GDDR5 (2x DVI, HDMI, DisplayPort) x 2 (2 von der sorte)
Sound: 7.1 support
Netzwerk: Gbit LAN
Software: Windows® 7 Home Premium,
Schnittstellen/Anschlüsse: Gehäuse-Front: Mic., Audio, 2xUSB 2.0, Front MCR, 1x Firewire, 1x eSATA Gehäuse-Rückseite: 8x USB 2.0, 2x USB3.0, 2x
Firewire, 2x eSATA, 2x DVI, 1x HDMI, 1x Gbit LAN, 2x SPDIF, 6x Audio
Besonderheiten: 80 Watt Netzteil
as you can see, absolute new hardware...
now photoshop tells her that her graphic card wouldnt fit the requirements, and allways switches to "software-sides" rendering.
this can't be true, this mashine is running hardchore grafic apps, and has the newest ATI Raedon Gra-Card (2 of them) which even now has a native support for open GL.
the computer has all latest drivers (no newer versions available)
so what to do?
i can't even tell photoshop manually in the settings to enable open GL...
i defenitally reached the end of my knowledge here.. i tried everything, also changing (as suggested by photoshop) the open GL settings of the graphic card card. no changes ...
need help with this one..
thank you already for your time and hopefully help
chris congrejo

This forum is for suite specific issues only. Please post in the Photoshop forum.
Bob

I can't call anybody, but I can receive calls. There's no problem with the sim card, and no numbers are blocked. Help me.

When I try to call, the call always failed.

From a different phone, call your cellular carrier. They need to get involved.

Problem with internal links created in iweb 06 after upgrading to iweb 08

I have a site I created in iweb 06 and have uploaded to my own server (not .mac). After switching to iweb 08, I have found that any blog entry that has a title with punctuation of any kind results in a broken link (404 page not found error). I am using fetch to upload the site, and am wondering if in need to change some fetch setting or preference. iweb 08 seems to use the blog entry title as the link, and it just won't work if there is any punctuation in the title. Everything uploaded perfectly in iweb 06. Is this a glitch in iweb 08 or am I doing something wrong. Thanks for any advice you can give. I have not upgraded to OS 10.5. (If you want to look at the site it's www.doylelogan.com/dlctravel)

All your links are live except the one you mentioned.
I don't understand what behavior you expect from the links. Your rollover color is very close to the normal and visited one. If you made it contrast more, the link would be more obvious.
I don't like to underline links but maybe you need to do this if you feel that they are not obvious enough.
Undo and redo the link that is not working.
It may be that iWeb needs a jolt. Try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

Strange problems with nvidia video card

Hi, I don't know if it's really a problem, but I suppose...
I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
Resuming I couldn't boot ubuntu if the nvidia card was enabled...
Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
In any case the nvidia (I think) is always working (the external monitor plugged in the DisplayPort works... I think that's a confirmation)
Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just for information on what's happened before this problem with windows..

I'm using Firefox with html 5...
But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

Problems with AOL e-mail and Droid Charge

Problems with AOL e-mail and Droid Charge
After setting up my AOL email account on my Charge, it has been syncing new messages ok, but I've been having other problems:
- Syncing AOL mail: I have the Charge set to sync 50 emails (set up the same way as my Comcast Account) but the AOL account pulls up the last 50 old emails and delivers them to the phone. (Comcast does not do this). If I delete these old messages, it just pulls up the same amount of even older mail. Very frustrating. Because of the 2nd problem below, some of these messages were actually deleted on my AOL account before I realized what was happening. It seems I have to just keep 50 old mails on my Charge to prevent this from happening. Any ideas?
- Second problem (kinda related) Deleting Old Mail: When I delete AOL emails I have read on the Charge, they are also deleted from my 'old mail' folder on AOL and sent to deleted mail. This is not how it worked on my BB Storm2. After deleting them with the Storm, the AOL mail would show them as read and put them in 'old mail' unless I told the Storm to delete them from the server. I cannot find any "choice" option on the Charge. I hate this because the "deleted mail" folder on AOL dumps its contents much more quickly than the "old mail" folder. How do I stop this from happening?
FYI, both Comcast and g-mail are working as they should.....
Thanks,

Dear Richs10,
As to the second problem, I have seen this before in other threads. The only solution I can come up with is to delete the AOL account and set it up on the phone from scratch. The reason for this is that the ONLY time you are able to see the option for leaving email on the server (or removing them) after reading on the phone is during the account setup process. After the account is set up, there seems to be no way to access this setting again. Kind of dumb, IMHO, but that seems to be the case.
If you need step-by-step walkthrough of the account setup, PM me.

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

Problem with fibre channel card and raid system after upgrading to 10.4.7

Similar Messages

Maybe you are looking for