Problems with auto-scale vertical charts when change time zones

I have built an application that utalizes Vertical Strip Charts. Basiclly, XY Charts that are filled with 100 points of data each loop cycle. To get the Time portion of it I use the Get Dat/Time in Seconds Function and then typecast it to a double. I have built the application and installed in on several PC in my same time zone no problem, but when I send it to someone in the UK on GMT time the strip chart does not update correctly. The scaling is off. The interesting thing is the most recent time on the chart is correct and is updating correctly, but the time at the top of the graph is not correct. Any suggestions or thoughts would be appreaciated.

Can you post a copy of this application, or an example that would demonstrate this? If you change your timezone on your computer to UK's timezone and restart LabVIEW (which is necessary for the change to take affect in LV), do you see this behavior?
Jarrod S.
National Instruments

Similar Messages

Problems with email account on ipad2 when changing from mobileme to icloud

Problems with email account on ipad2 when changing from mobileme to icloud

Would you please give us some more information about your problems.

Can I set calender invite to set at the same time, even when changing time zone. for example I am in the UK have set a meeting for 10am in NYC for weds, but when getting to NYC it is still set at 10am and doen't adjust to time zone?

Can I set my Calendar invites on a IOS 7 device to set at the same time, even when changing time zones. For example I am in the UK and need to set a meeting for 10am NYC time on Wednesday, but when I reach NYC I don't want the time zones to adjust which will then adjust my meeting I set in the UK to NYC time.

Here are the individual files for those that fear the my other file of virii.
Attachments:
HASP.vi ‏88 KB
File Setup.vi ‏11 KB
Gather and Output.vi ‏149 KB

Auto update of time when changing time zones - PLEASE help.

I travel for a living and I can't figure out how to get this 8310 to auto update the time when I fly from one time zone to another. Can anyone help me with this? Thank you so much in advance!

I'm sorry to inform you that the blackberry does not have a feature like this yet. You can read this FAQ and it will give you some tips though.
Why doesn't my time update correctly when I change Time Zones? - BlackBerryFAQ.com
You would need to set that manually and enter the meeting times in accordingly.
Sorry!

Birth date shifts back 1 day when changing time zones

I live in China temporarily, but I come back to the US frequently. China is 15 hours ahead of the Mountain time zone in which I currently am. This trip, many of my birthdays were listed a day earlier in Address Book, thus being reflected incorrectly in iCal. Why would this happen? And how can I prevent it??? Very annoying!!

Amaneta,
this happened to me too once when traveling between EU and US, it was not the date that changed but all my appointments shifted 10 hours in iCal and Palm.
Can't remember if there was a solution posted but I changed my Mac time to CET, installed a backup from the previous day on my Palm and deleted the iCal appointments before doing a sync with the Palm.
Scary stuff for sure. See if just changing back the time to China time solves your problem (at least partly, you will not be in sync with US time), uncheck automatic time zones in Preferences/Date&Time

Entourage - Appointments change when changing time zone

Hello There,
When changing the time zone in Entourage all the appointments already entered do change as well.
E.g. the appointment is 8 am. After changing the time zone by 4 hours, the appointment changes to 4 am
I don't know why that is as it does not make any sense at all. Just because you change the time zone while travelling the time of your appointments don't change.
What can I do to avoid he undesired change of appointments.
Thanks

Hi Tom!
Don't change the timezone in Entourage once you have it set. Instead, change your Mac's timezone using the Date & Time System Preferences pane.
The default timezone in Entourage is your reference point for new appointments only. For example, if you create an appointment at 9 a.m. CST, it's still going to occur at 9 a.m. CST even though you're really at 7 a.m. PST by your clock. If you intend to schedule an appointment that will occur while you're traveling schedule it for the time in your Entourage default timezone.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

MacBook Pro backs up entirely when changing time zones

Good Afternoon
I have a late 2013 Macbook Pro running Yosemite 10.10.2.
I am using FreeFileSync 6.13 to do my incremental back up to a Verbatim external hard drive.
In general terms this set up works perfectly and only backs up the data that's changed since the last backup was ran. However, whenever the daylight savings time changes or I move time zones (as my job requires me to do every few weeks), the software backs up absolutely everything and takes hours to do it.
Am I doing something wrong or is there a better piece of software available that won't cause this "full" backup to occur?
Many thanks.
Martin

Thanks - what's the main topic heading to read up on this issue? (I'm very new to Apple and the support forums).
Regards,

Calendar entries updated when changing time zone (...

Can somebody please explain to me the use of this option?
It is logical you make your appointments on the local time no? Because of this stupid option, I almost missed an important job interview. Is there any way to turn it off? Or can the next update change this, cause I really do not see the point of that other than causing confusion
thanks

This is by design. Check Settings > Mail, Contacts, Calendars > Time Zone Support. Turn it on to undo this behavior. Anyway, read what it says there - it describes what you have seen.

Problem with the scale of pictures when importing.

I have taken 250 images which I will edit into a stop motion film. however, I've encountered a few problems.
The biggest problem is that when I imported the images into the timeline they were severely magnified and not even centered in the frame. as you can see by this screenshot:
This is a big problem. You'd think I wouldn't have to go through every signle image and scale it down to correctly fit the frame..... right?? It's not even centered which means I have to scale and move and be very accurate and it's going to take so many hours to do! What is wrong here, how do I fix it so that when I import the images, they are the correct scale?
problem 2: when i put the images in the timeline they were "backwards". As in, the last image was first in the timeline and the first image was last. It's like the program is TRYING to make my life a living hell.

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

TS1646 i have a problem with my itunes accounts. When i want to buy in-app features i got an error that;

"i have a problem with my itunes accounts. When i want to buy in-app features i got an error that;
"Please contact with iTunes support for completing this process"
i checked my device settings and i tried my account with another ios device but result not changed. i still get same error. my credit card address info and my account address info same with each other. i tried my other credit cards but i got same error.
Please check my account details for solving this issue.

These are user-to-user forums, you are not talking to Apple here.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, the try selecting Purchases, Billing & Redemption

HT2731 I have a problem with my iPad 1 . When I create new g Id , I have a Clam requied update iOS last vesion while this version is 5.11 . Help me. Thanks

I have a problem with my iPad 1 . When I create new g Id , I have a Clam requied update iOS last vesion while this version is 5.11 . Help me. Thanks

Before I update my iOS auto is 5.11 . Apter I reset my iPad and crease new Id then error Appear . I can not fix it . Thanks your support

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF.

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF. I have uninstalled FF and re-installed it and no change.
Walt

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Problems with auto-scale vertical charts when change time zones

Similar Messages

Maybe you are looking for